Pipe construction

Sicherheitsventil mit Abschaltung beim Verhaken 84 Nm max. Drehmoment Wasseranschluss Aufnahmedorn: 1-1/4" außen , 1/2" innenHydraulik: 20-34 L/min. bei 105-170 bar, Rückstaudruck: 90 bar Bohrdurchmesser: ø 50 - 160 mmDrehzahl: 400-600 min-1Abmessungen: 9x32x40 cmGewicht: 8 kg

Sicherheitsventil mit Abschaltung beim Verhaken 84 Nm max. Drehmoment Wasseranschluss Aufnahmedorn: 1-1/4" außen , 1/2" innenHydraulik: 20-34 L/min. bei 105-170 bar, Rückstaudruck: 90 bar Bohrdurchmesser: ø 50 - 160 mmDrehzahl: 400-600 min-1Abmessungen: 9x32x40 cmGewicht: 8 kgUnterwasserversion für Taucharbeiten

Sicherheitsventil mit Abschaltung beim Verhaken 84 Nm max. Drehmoment Wasseranschluss Aufnahmedorn: 1-1/4“ AußengewindeHydraulik: 20-34 L/min. bei 105-170 bar, Rückstaudruck: 90 bar Bohrdurchmesser: ø 20 - 100 mmDrehzahl: 1000-1500 min-1Abmessungen: 9x32x40 cmGewicht: 8 kg

Sicherheitsventil mit Abschaltung beim Verhaken 84 Nm max. Drehmoment Wasseranschluss Aufnahmedorn: 1-1/4“ AußengewindeHydraulik: 20-34 L/min. bei 105-170 bar, Rückstaudruck: 90 bar Bohrdurchmesser: ø 20 - 100 mmDrehzahl: 1000-1500 min-1Abmessungen: 9x32x40 cmGewicht: 8 kgUnterwasserversion für Taucharbeiten

Kernbohrmaschinen zum Anbau an Lafetten. Der Hydraulikmotor kann schnell ausgewechselt werden. Dies  ermöglicht einen weiten Anwendungsbereich und senkt die Kosten.Eigenschaften: Motor:100 cc Hydraulikmotor für 125-250 mm Durchmesser D = 130-250 mm - 300 min-1 bei 30 L/min.D = 125-180 mm - 380 min-1 bei 38 L/min.Standardaufnahme für BohrständerWasseranschluss Aufnahmedorn: 1-1/4" außen , 1/2" innenHydraulik: 30-40 L/min. bei 200 bar, Rückstaudruck: 90 bar Bohrdurchmesser: ø125-ø250 (je nach montiertem Motor ) Drehzahl: 300-380 min-1 (je nach montiertem Motor)Abmessungen: 54x22 cmGewicht: 13 kgUnterwasserversion für Taucharbeiten

Hydraulic power pack for the operation of hydraulic devices such as winches or double-acting cylinders that have to be controlled remotely. The machine is equipped with modern wireless remote control electronics that control the hydraulic functions via a portable console.For hydraulic motors the functions of clockwise/stop/anti-clockwise rotation with speed control up to a distance of 80 meters from the control unit.For hydraulic cylindersthe functions press/hold/retract with speed control up to a distance of 80 meters from the power pack.In the event of a failure of the electronic remote control, the power pack allows normal use with manual control only hydraulic, can therefore be used with the same functions regardless of remote control, the pressure gauge indicates the load value allowing an accurate adjustment of the movements. The weight and the dimensions contained at the maximum guarantee excellent portability and mobility both on board the vehicles and on the ground. ASPID GETZ has an accurate build quality, is manufactured with the best materials and components to guarantee a long and trouble-free service.Technical specifications: Oil delivery rate: 12 L / min at max. 140 bar Engine: 6 HP Briggs & Stratton, gasoline Start: pull-wire and electric starter Speed ​​control, manual Oil tank: 7 liters Flat-Face quick connector 3/8 " Radio remote control, range 80 meters Dimensions: 700x500x570mm Weight: 62 kg

Hydraulic power pack for the operation of hydraulic devices such as winches or double-acting cylinders that have to be controlled remotely. The machine is equipped with modern wireless remote control electronics that control the hydraulic functions via a portable console.For hydraulic motors the functions of clockwise/stop/anti-clockwise rotation with speed control up to a distance of 80 meters from the control unit.For hydraulic cylindersthe functions press/hold/retract with speed control up to a distance of 80 meters from the power pack.In the event of a failure of the electronic remote control, the power pack allows normal use with manual control only hydraulic, can therefore be used with the same functions regardless of remote control, the pressure gauge indicates the load value allowing an accurate adjustment of the movements. The weight and the dimensions contained at the maximum guarantee excellent portability and mobility both on board the vehicles and on the ground. ASPID GETZ has an accurate build quality, is manufactured with the best materials and components to guarantee a long and trouble-free service.Technical specifications: Oil delivery rate: 12 L / min at max. 140 bar Engine: 6 HP Briggs & Stratton, gasoline Start: pull-wire and electric starter Speed ​​control, manual Oil tank: 7 liters Flat-Face quick connector 3/8 " Radio remote control, range 80 meters Dimensions: 700x500x570mm Weight: 62 kg

HDS6 is a diamond chain saw suitable for precise cuts with edges or in flush cut mode in concrete and building materials. HDS6 is also suitable for cuts on cast iron or iron pipes. The innovative patented system, Quick Tension, allows a smooth and fast management of the chain tension without disassembling the side casing and facilitating the operator in uncomfortable situations or in underwater applications.Deep cutting capacitySide handle rubbered for high comfortHigh speed hydraulic motor 6600RPMChain cooling water tapQuick water couplerQuick tension system to adjust chain tension (Patented)Full body in allyminiumBubble levelFlush cutHydraulics: 40 L / min. at 175barOperator speed: 5.800 rpm free of loadSword length (order separately): 40 cm Dimension: 620x24xH30 cmWeight: 13 kg with bar & chain 40 cmAvailable in underwater version

Built-in powerful portable slurry pump.Maximum delivery rate: 800 L / min. Maximum head: 35 meters max.passage: 30 mm Hydraulic inlet: 15-30 L / min. at 100-210 bar Hose connection: 2 "BSP-IG Weight: 8 kg ATEX version available: DOA SP-21-ATEXSubmersible (no preparation required) Absolutely maintenance free Drying out without any damage Lifting eye and handle Hose whips with flat-face connections (ISO-16028) Conditionally suitable for salt water. Clean after use. No 24 hour operation in salt water possible.

SP21 is a compact and powerful submersible trash pump with cast iron hydraulic motor. The pump is ATEX approved and has been designed to pump in explosive environment of: - flammable liquids - water in presence of explosive vapours - base petroleum liquids, - loaded fluids and liquid with high viscosity Flow is up to 800 L/min, the water headv 35 metres with capacity of pumping suspended solids with dimension 30 mm.Maximum delivery rate: 800 L / min. Maximum head: 35 meters max.passage: 30 mm Hydraulic inlet: 15-30 L / min. at 100-210 bar Hose connection: 2 "BSP-IG Weight: 8 kg ATEX version available: DOA SP-21-ATEXSubmersible (no preparation required) Absolutely maintenance free Drying out without any damage Lifting eye and handle Hose whips with flat-face connections (ISO-16028) Conditionally suitable for salt water. Clean after use. No 24 hour operation in salt water possible.

Built-in powerful portable slurry pump.Maximum delivery rate: 1.600 L / min. Maximum head: 35 meters max.passage: 50 mm Hydraulic inlet: 15-38 L / min. at 100-210 bar Hose connection: 3 "BSP-IG Weight: 28 kg ATEX version available: DOA SP-36-ATEXSubmersible (no preparation required) Absolutely maintenance free Drying out without any damage Lifting eye and handle Hose whips with flat-face connections (ISO-16028) Conditionally suitable for salt water. Clean after use. No 24 hour operation in salt water possible.

Built-in powerful portable slurry pump.Die Pumpe ist ATEX-zugelassen und wurde entwickelt, um in explosionsgefährdeten Umgebungen zu pumpen von:- Entflammbare Flüssigkeiten- Wasser in Gegenwart von explosiven Dämpfen- Basisölflüssigkeiten,- geladene Flüssigkeiten und Flüssigkeiten mit hoher ViskositätMaximum delivery rate: 1.600 L / min. Maximum head: 35 meters max.passage: 50 mm Hydraulic inlet: 15-38 L / min. at 100-210 bar Hose connection: 3 "BSP-IG Weight: 28 kg Submersible (no preparation required) Absolutely maintenance free Drying out without any damage Lifting eye and handle Hose whips with flat-face connections (ISO-16028) Conditionally suitable for salt water. Clean after use. No 24 hour operation in salt water possible.

Extremely powerful portable slurry pump. Maximum delivery rate: 3,000 L / min. Maximum head: 16 meters max.passage: 70 mm Hydraulic inlet: 20-45 L / min. at 140 bar Hose connection: 4 "BSP-IG Weight 25 kg With the optional SG-4 vortex head, it enables sediments to be swirled up and then pumped out. Due to the large inlet opening, it guarantees a large free passage and clog-free operation. Submersible (no preparation required) Absolutely maintenance free Working pressure 140 bar Drying out without any damage Lifting eye and handle Hose whips with flat-face connections (ISO-16028) Wing nut for easy bowl changes and cleaning Conditionally suitable for salt water. Clean after use. No 24 hour operation in salt water possible.

Extremely powerful portable slurry pump.ATEX versionMaximum delivery rate: 3,000 L / min. Maximum head: 16 meters max.passage: 70 mm Hydraulic inlet: 20-45 L / min. at 140 bar Hose connection: 4 "BSP-IG Weight 25 kg With the optional SG-4 vortex head, it enables sediments to be swirled up and then pumped out. Due to the large inlet opening, it guarantees a large free passage and clog-free operation. Submersible (no preparation required) Absolutely maintenance free Working pressure 140 bar Drying out without any damage Lifting eye and handle Hose whips with flat-face connections (ISO-16028) Wing nut for easy bowl changes and cleaning Conditionally suitable for salt water. Clean after use. No 24 hour operation in salt water possible.

Extremely powerful portable slurry pump. Maximum delivery rate: 5,500 L / min. Maximum head: 29 meters max.passage: 55 mm Hydraulic inlet: 50-100 L / min. at 150-350 bar Hose connection: 5"BSP-IG Weight 95 kg Attachment device for excavators available Cuts on the impeller shred larger suspended matter. Clogging of the lines is minimized.Due to the large inlet opening, it guarantees a large free passage and clog-free operation. Submersible (no preparation required) Absolutely maintenance freeDrying out without any damage Lifting eye and handle Hose whips with flat-face connections (ISO-16028) Wing nut for easy bowl changes and cleaning Conditionally suitable for salt water. Clean after use. No 24 hour operation in salt water possible.

Extremely powerful portable slurry pump. Maximum delivery rate: 8,000 L / min. Maximum head: 39 meters max.passage: 65 mm Hydraulic inlet: 60-100 L / min. at 150-350 bar Hose connection: 6"BSP-IG Weight 135 kg With the optional SG-6 vortex head, it enables sediments to be swirled up and then pumped out. Due to the large inlet opening, it guarantees a large free passage and clog-free operation. Attachment device for excavators available Cuts on the impeller shred larger suspended matter. Clogging of the lines is minimized.Submersible (no preparation required) Absolutely maintenance freeDrying out without any damage Lifting eye and handle Hose whips with flat-face connections (ISO-16028) Wing nut for easy bowl changes and cleaning Conditionally suitable for salt water. Clean after use. No 24 hour operation in salt water possible.

TWP40 is a modern gasoline engine water pump with adjustable pressures up to 40 Bar and flow up to 60 L/min, pump is designed to make test and pressure drop related to time on new water networks. The pump characteristics and its versatility allow to perform the majority of test requested by the European norms. The construction quality, the rational position of components, the practical controls and regulation features makes its operations easy and intuitive to guarantee an use precise and problems free.High quality two diaphragm pump and engine speed reductor Water filter on suction line to prevent stone and particles to enter in pump High quality water tank with large filler aperture for loading and cleaning Quick bayonet tank connection for continuous refilling Can run dry without damage Stainless steel square tube frameTechnical specifications: Engine: Briggs & Stratton 6 HP petrol Start: pull starter Water flow rate: max. 60 L / min, adjustable Water pressure: max. 40 bar, adjustable Water tank: 30 liters Water pipe connection: 3/8 "BSP Dimensions: 700x500x700 mm Weight: 50 kg (unfilled)

WP116 is a modern self priming water pump with hydraulic motor. The pump is designed for the suction and evacuation of water that accidentally entered in the collecting siphons located in the lower parts of gas networks. Water can enter into gas pipes after ruptures or maintenance interventions, this mass of water accumulated in the lower part of the network can fill up the siphons and also overflowing choking the pipes and preventing the normal free gas passage that inevitably flows away by “waves” causing water entering and damaging the gas meters and creating other problems that are well known by the gas maintenance crews. WP116 is made in spark free bronze and with moving parts without metal/metal contacts so no possibility of creating localised overheated points. The hydraulic functioning (no electricity!) means implicit safety that has to be absolutely guaranteed in this delicate operation. For the use is enough to connect the suction mouth of pump with a flexible hoses to the siphon and then prime and pump out the mixture water/ gas / air, all in absolute safety and with the gas line in normal working condition. The fluid extracted has to be successively disposed according to local rules as it is a special waste. WP116 is unique in its type, for characteristics, function and safety assurance cannot miss in the equipment of modern gas maintenance crews.Practical, robust and safe is irreplaceable in its application Fabricated in “spark free” anti explosive bronze Large water filter prevents dirt and metal chips to enter in the pump The water filter can be open in few seconds for cleaning and inspection Requires minimal and easy maintenanceTechnical specifications: Water flow rate:110 L / min at 1 meter rise25 L / min at a height of 20 metersDelivery head: max. 20 meters (2 bar) Suction height: max. 6 meters above the water level Hose connection: Ø40mm (suction and pressure line) Ideal suction diameter: 25 mm Water quality: filtered water Hydraulics: 20-30 L / min at 100-210 bar

Tremendously powerful portable sewage pump. Maximum delivery rate: 1,650 L / min. Maximum head: 45 meters max.passage: 20 mm Hydraulic inlet: 15-38 L / min. at 100-210 bar Hose connection: 2-1 / 2 "BSP-IG Weight 9.5 kg Submersible (no preparation required) Absolutely maintenance free Drying out without any damage Lifting eyes Hose whips with flat-face connections (ISO-16028) Conditionally suitable for salt water. Clean after use. No 24 hour operation in salt water possible.

Das HCD-25-100 gehört zu den leistungsstärksten und bedienungsfreundlichsten handgeführten Kernbohrgeräten auf dem Markt. Es ist perfekt für handgeführtes Bohren an schwer zugänglichen Stellen geeignet, an denen keine Bohrgestelle oder elektrische Bohrmaschinen verwendet werden können. Bohren von Betonrohren, Lüftungslöchern oder jede andere Art von Arbeiten, bei denen handgeführte Geräte die schnellste Lösung sind. Es ist extrem einfach im Gebrauch und eignet sich für jedes Material. Es wird kein Bohrgestell benötigt. Für schwere Arbeiten passt der HCD-25-100 jedoch auch in ein Standard-Bohrgestell. Das Kernbohrgerät ist mit einem eingebauten hydraulischen Drehmomentbegrenzer (ASCO-System) ausgestattet, für ein maximales Drehmoment sorgt und bei festgefahrenem Bohrer einen Rückschlag verhindert. Das Kernbohrgerät verfügt über eine automatische integrierte Sicherheitsfunktion, die den Kernbohrer anhält, wenn er klemmt. Lösen Sie jedoch im Falle eines Verklemmens immer den Bohrkern vom Material, bevor Sie erneut mit dem Bohren beginnen. Die integrierte Sicherheitsfunktion ist werksseitig eingestellt und darf nicht gestört werden.Hydraulik: 20 L/min. bei 100-172 barBohrdurchmesser: ø25-ø100Drehzahl: 1500 min-1Antriebsadapter : Inklusive ½" BSP-Buchse mit einem 1-1/4" UNC-SteckeradapterSchalldruckpegel 1 m LWA: 84 dB Vibrationsniveau: <2,5 m/s2 

Das HCD-50-200 gehört zu den leistungsstärksten und bedienungsfreundlichsten handgeführten Kernbohrgeräten auf dem Markt. Es ist perfekt für handgeführtes Bohren an schwer zugänglichen Stellen geeignet, an denen keine Bohrgestelle oder elektrische Bohrmaschinen verwendet werden können. Bohren von Betonrohren, Lüftungslöchern oder jede andere Art von Arbeiten, bei denen handgeführte Geräte die schnellste Lösung sind. Es ist unempfindlich gegen Wasser, Staub usw. und sehr beliebt für Abwasserinstallationen. Die Tatsache, dass Sie handgeführt bis zu ø350 mm bohren können, ohne dass ein Bohrgestell erforderlich ist, eröffnet vielfältige Einsatzmöglichkeiten und bringt enorme Zeitersparnis. Mit dem HCD-50-200 können Sie bis zu 350 mm von Hand bohren. Für schwere Arbeiten passt das Gerät jedoch auch in ein Standard-Bohrgestell. Das Kernbohrgerät ist mit einem eingebauten hydraulischen Drehmomentbegrenzer (ASCO-System) ausgestattet, für ein maximales Drehmoment sorgt und bei festgefahrenem Bohrer einen Rückschlag verhindert. Das Kernbohrgerät verfügt über eine automatische integrierte Sicherheitsfunktion, die den Kernbohrer anhält, wenn er klemmt. Lösen Sie jedoch im Falle eines Verklemmens immer den Bohrkern vom Material, bevor Sie erneut mit dem Bohren beginnen. Die integrierte Sicherheitsfunktion ist werksseitig eingestellt und darf nicht gestört werden.Hydraulik: 20 L/min. bei 100-172 barBohrdurchmesser: ø50-ø200Drehzahl: 600 min-1Antriebsadapter: Inklusive ½" BSP-Buchse mit einem 1-1/4" UNC-SteckeradapterSchalldruckpegel 1 m LWA: 80 dB Vibrationsniveau: <2,5 m/s2 Gewicht: 7,6 kg

Rohrpresswerkzeuge Rohrbiegewerkzeuge Rohrabmanteln und -schälen Rohre anbohren Rohre schneiden und sägen Rohre entgraten

Shut-off tool for steel pipe.Hydraulic pipe compressing tool for steel pipes Max. diameter D=100mm This tool has been specially developed for the sealing of gas-conducting steel and PE pipes up to an outside diameter of 100 mm (DN80) To seal damaged water or gas lines It can also be used to seal damaged water pipes For this tool, you can use our hydraulic foot pump FHP-2 with an working pressure of 850 bar / 12.150 PSI 

Shut-off tool for steel pipe.Hydraulic crimping device for steel pipes up to DN80 with a 850 bar hydraulic pump (12,142 PSI). This tool was specially developed for sealing gas-carrying steel and PE pipes up to an outer diameter of 100 mm (DN80). It can also be used to seal damaged water pipes. Scope of delivery: - pipe squeezing / pressing tool - FHP-2-M-850BAR hydraulic foot pump with pressure gauge - 3 m hydraulic hose - carrying case