These battery-powered hydraulic cable shears AS32S-M18V from KW Hydraulik have been developed for cutting copper and aluminium cables - cleanly, quickly and powerfully. With an opening width of 32 mm and a cutting force of 15 kN, the tool is ideal for use in energy and installation technology.The rotating cutting head in open scissor design enables work to be carried out even in hard-to-reach areas. An integrated LED light ensures optimum visibility in the work area - even in poor lighting conditions.The cable shears are powered by a powerful 18V lithium-ion battery from MAKITA. The robust, impact-resistant plastic housing protects the technology in tough everyday use on the construction site, while the sturdy transport case ensures safe and convenient transportation. Whether in network construction, maintenance or on the construction site - these battery-powered hydraulic cable shears are the ideal companion for professionals who value performance and mobility.Rotating cutting head, open shears18 volt lithium-ion battery from MAKITACutting force 15 kNIntegrated LED light to illuminate the work areaRobust plastic housing, impact-resistant Very sturdy transport case
These ES50M-ME18V battery-powered hydraulic cable shears from KW Hydraulik have been developed for cutting copper and aluminium cables - cleanly, quickly and powerfully. With an opening width of 50 mm and a cutting force of 50 kN, the tool is ideal for use in energy and installation technology.The rotating cutting head in open scissor design enables work to be carried out even in hard-to-reach areas. An integrated LED light ensures optimum visibility in the work area - even in poor lighting conditions.The cable shears are powered by a powerful 18 V lithium-ion battery. The robust, impact-resistant plastic housing protects the technology in tough everyday construction site conditions, while the sturdy transport case ensures safe and convenient transport. Whether in network construction, maintenance or on the construction site - these battery-powered hydraulic cable shears are the ideal companion for professionals who value performance and mobility.Rotating cutting head, open shears18 volt lithium-ion batteryCutting force 50 kNIntegrated LED light to illuminate the work areaRobust plastic housing, impact-resistant Very sturdy transport caseAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts
for Mercedes Sprinter- from year of construction 2021- with front-wheel drive (FWD)- with manual gearbox- No power take-off on the transmission (PTO) is required- the system can be retrofitted to existing vehiclesPower generator- 230 Volt / 5 kVA / 16 A / CEE socket blue or SCHUKO- 400 Volt / 10 kVA / 16 A / CEE socket redCompressed air compressor650 l/min at 10 barAccumulator 25 litresMaintenance unit: pressure reducer, lubricator, water separatorSupplied without compressed air hoses and connectionsElectrode welding unit 300 AmpED100% = 150 Amp | ED60% = 200 Amp | ED30% = 300 Amp- Connection for welding cable plug SK 35/50 mandrel Ø13mm- Connection for cable remote control- Potentiometer welding current- Potentiometer arc Force- Welding overload alarm- Welding / battery Jumpstart Selector- Supplied without welding cable and cable remote controlHydraulic connection for external hydraulic tools- 30 l/min at 140 bar- FlatFace couplingsHYDRO power packs provide mobile power for your service and workshop vehicle. Installation kit in vehicles with front-wheel drive.The engine of your vehicle serves as a drive for a hydraulic pump. The energy generated in this way can drive our generator anywhere in the vehicle, which supplies electricity at a constant frequency.Scope of delivery:Hydraulic pump with magnetic coupling, bracket, beltPower generator unit with hydraulic tank, oil cooling, filterControl unit with vehicle-specific cables and adapters Price includes installation.The vehicle must be delivered to and collected from us for installation in your vehicle. These transfer costs are not included in the price.
for Mercedes Sprinter- from year of construction 2021- with front-wheel drive (FWD)- with manual or automatic transmission- No power take-off on the transmission (PTO) is required- the system can be retrofitted to existing vehiclesPower generator- 230 Volt / 5 kVA / 16 A / CEE socket blue or SCHUKO- 400 Volt / 10 kVA / 16 A / CEE socket redCompressed air compressor650 l/min at 10 barAccumulator 25 litresMaintenance unit: pressure reducer, lubricator, water separatorSupplied without compressed air hoses and connectionsElectrode welding unit 300 AmpED100% = 150 Amp | ED60% = 200 Amp | ED30% = 300 Amp- Connection for welding cable plug SK 35/50 mandrel Ø13mm- Connection for cable remote control- Potentiometer welding current- Potentiometer arc Force- Welding overload alarm- Welding / battery Jumpstart Selector- Supplied without welding cable and cable remote controlHydraulic connection for external hydraulic tools- 30 l/min at 140 bar- FlatFace couplingsHYDRO power packs provide mobile power for your service and workshop vehicle. Installation kit in vehicles with front-wheel drive.The engine of your vehicle serves as a drive for a hydraulic pump. The energy generated in this way can drive our generator anywhere in the vehicle, which supplies electricity at a constant frequency.Scope of delivery:Hydraulic pump with magnetic coupling, bracket, beltPower generator unit with hydraulic tank, oil cooling, filterControl unit with vehicle-specific cables and adapters Price includes installation.The vehicle must be delivered to and collected from us for installation in your vehicle. These transfer costs are not included in the price.
for VW CRAFTER / MAN TGE- from model year 2017- with front-wheel drive (FWD)- with manual gearbox- No power take-off on the gearbox (PTO) is required- the system can be retrofitted to existing vehiclesPower generator- 230 Volt / 5 kVA / 16 A / CEE socket blue or SCHUKO- 400 Volt / 10 kVA / 16 A / CEE socket redCompressed air compressor650 l/min at 10 barAccumulator 25 litresMaintenance unit: pressure reducer, lubricator, water separatorSupplied without compressed air hoses and connectionsElectrode welding unit 300 AmpED100% = 150 Amp | ED60% = 200 Amp | ED30% = 300 Amp- Connection for welding cable plug SK 35/50 mandrel Ø13mm- Connection for cable remote control- Potentiometer welding current- Potentiometer arc Force- Welding overload alarm- Welding / battery Jumpstart Selector- Supplied without welding cable and cable remote controlHydraulic connection for external hydraulic tools- 30 l/min at 140 bar- FlatFace couplingsHYDRO power packs provide mobile power for your service and workshop vehicle. Installation kit in vehicles with front-wheel drive.The engine of your vehicle serves as a drive for a hydraulic pump. The energy generated in this way can drive our generator anywhere in the vehicle, which supplies electricity at a constant frequency.Scope of delivery:Hydraulic pump with magnetic coupling, bracket, beltPower generator unit with hydraulic tank, oil cooling, filterControl unit with vehicle-specific cables and adapters Price includes installation.The vehicle must be delivered to and collected from us for installation in your vehicle. These transfer costs are not included in the price.
for VW CRAFTER / MAN TGE- from model year 2017- with rear-wheel drive (RWD)- with manual gearbox- No power take-off on the gearbox (PTO) is required- the system can be retrofitted to existing vehiclesPower generator- 230 Volt / 5 kVA / 16 A / CEE socket blue or SCHUKO- 400 Volt / 10 kVA / 16 A / CEE socket redCompressed air compressor650 l/min at 10 barAccumulator 25 litresMaintenance unit: pressure reducer, lubricator, water separatorSupplied without compressed air hoses and connectionsElectrode welding unit 300 AmpED100% = 150 Amp | ED60% = 200 Amp | ED30% = 300 Amp- Connection for welding cable plug SK 35/50 mandrel Ø13mm- Connection for cable remote control- Potentiometer welding current- Potentiometer arc Force- Welding overload alarm- Welding / battery Jumpstart Selector- Supplied without welding cable and cable remote controlHydraulic connection for external hydraulic tools- 30 l/min at 140 bar- FlatFace couplingsHYDRO power packs provide mobile power for your service and workshop vehicle. Installation kit in vehicles with front-wheel drive.The engine of your vehicle serves as a drive for a hydraulic pump. The energy generated in this way can drive our generator anywhere in the vehicle, which supplies electricity at a constant frequency.Scope of delivery:Hydraulic pump with magnetic coupling, bracket, beltPower generator unit with hydraulic tank, oil cooling, filterControl unit with vehicle-specific cables and adapters Price includes installation.The vehicle must be delivered to and collected from us for installation in your vehicle. These transfer costs are not included in the price.
The sheet metal punches from KW Hydraulik are the ideal solution for precise, burr-free punching of sheet metal and plastics in areas such as car body construction, switch cabinet production or stainless steel kitchens. The revised cutting geometry reduces the cutting pressure, minimises the effort required and extends the service life of the tool and hydraulic components.
Suitable for manual or hydraulic operation - with connection thread M19 (3/4" UNF). The use of a hydraulic tool is recommended for cut-outs from 26×26 mm in ST37.
Available sizes:
Rectangular and square holes from 22×22 mm to 138×138 mm
At a glance:For manual and hydraulic operation.The sheet metal punching system for effortless, fast and burr-free punching of sheet metal and plastics.The newly developed cutting geometry allows you to work with less effort thanks to reduced cutting pressure requirements. Material wear is significantly reduced. The loads on the hydraulic seals are significantly reduced. Connection thread M 19 mm (3/4 "UNF) Note
From 26x26mm for ST37 we recommend the use of hydraulic tools.The friction in the thread of hand-operated perforations (with hexagon head screw) is so strong that the lag screw is worn out after repeated operation. We therefore do not provide any guarantee for the draw bolt.There is no friction with hydraulically actuated tie rods. They are therefore suitable for continuous use.
The 9008 hydraulic power unit was specially developed for use with IMB MULTIFOR devices and impresses with its robust design and precise performance. Equipped with a high-precision radial piston pump and a low-maintenance electric motor in an oil bath, it delivers reliable hydraulic power even under demanding conditions.
An integrated pressure switch ensures automatic switch-off and return as soon as the preset working pressure is reached. It is conveniently controlled via the integrated foot pedal or optionally by remote control.
Thanks to the 24V control, protractor socket and earthed socket, the unit is versatile and safe to operate. The scope of delivery includes everything you need for immediate use: 2.5 m hydraulic hose, socket and connection cable - ready for connection and immediate operation.
Available from KW Hydraulik - your specialist for high-quality and practice-orientated hydraulic solutions.
Equipped with:Motor protection switchBuilt-in control pedalPressure switch with adjustable electrical contacts, which stops automatically when the pressure is reached and the cylinder is then retractedElectronic protractor socketProtective housing socketPedal socket for remote control24V DC controlsComplete and ready for use, equipped with 2.5 m hose, sleeve and protective contact socket.
The ABL2 is a compact and powerful battery-powered hydraulic sheet metal punch for professional applications in car body, switch cabinet or plant construction. The 360° rotatable tool head enables flexible working even in hard-to-reach places. With the proven 18 V Li-Ion MAKITA technology, this tool offers maximum mobility and reliability - even in confined spaces.
Compatible with tools from ALFRA, HÄWA and GREENLEE, the ABL2 is perfect for punching sheet steel, stainless steel (VA) and plastic. The robust design enables punching up to the following maximum values:
Ø 96 mm in sheet steel (t = 2 mm)
Ø 64 mm in sheet steel (t = 3 mm)
Ø 64 mm in VA sheet metal (t = 2 mm)
Suitable for:Perforator for sheet steel up to Ø 96 mm (POWERsplit)Perforator for stainless steel up to Ø 63.5 mm (POWERsplit VA)Developed for maximum efficiency - whether on the construction site or in the workshop.Discover now at KW Hydraulik.
At a glance:360° swivelling headCompatible with ALFRA, HÄWA and GREENLEEFor punching sheet steel, stainless steel and plastic- Ø 96 mm in sheet steel t = 2 mm- Ø 64 mm in sheet steel t = 3 mm- Ø 64 mm in VA sheet metal t = 2 mm18 volt MAKITA Li-Ion battery and MAKITA chargerScope of delivery: - Hole punch ABL2-M18V- Pull axle 19x130 mm - Pull axle 9.5x70 mm - Adapter 19x9.5 mm- Carrying case - MAKITA battery and charger The following tools can be used:- Round hole tools for ST37 / t=2mm: max. D=96 mm- Round hole punching tools for ST37 / t=3mm: max. D=63 mm- Round hole punching tools for VA / t=2mm: max. D=63 mm
This unique combination tool can bend and straighten structural steel up to D=25mm.TheKPE-ABR25-M18VT cordless hydraulic bending and straightening tool is the ideal solution for bending and straightening reinforcing bars in reinforced concrete construction with a diameter of Ø 25 mm. Equipped with an integrated battery-powered hydraulic pump (18 V), the tool is immediately ready for use - without the need for a power connection.This tool combines high power reserves with a compact design and is ideal for reinforcement work, renovation and corrections on the construction site.Available from KW Hydraulik - your specialist for professional cutting, bending and straightening technology in concrete and steel construction.Product facts:Cutting capacity: Ø 4-25 mmBending capacity: Ø 4-25 mmBending angle: 0-130°Dimensions: 590x120x215 mmWeight: 13.5 kgDelivery: ABR25-M18VT bending tool, straightening attachment, incl. 18V/5Ah MAKITA battery and chargerAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare partsWe are happy to carry out test bends for you.
The stripping tool for overhead lines (ACSR) is a professional special tool for precise stripping of the aluminium conductor sheath of aluminium-steel cables (AL/ST). It is suitable for use with ACSR cables with a conductor cross-section of 1250-1440 mm² - ideal for installations in the field of electrical power distribution and overhead line construction.The tool works with an adjustable cutting wheel that enables clean and controlled stripping of the outer aluminium wires without damaging the inner steel core. This ensures tension-proof preparation for connectors or terminations - a crucial step in the professional processing of ACSR cables.The tool is equipped with a holder for guide bushes for precise guidance and adaptation to different cable diameters. Guide bushes are available separately and enable optimum centring during the cutting process.The cutting tool offers a robust, practical solution for energy suppliers, network operators and installation teams in high and medium voltage networks.Available from KW Hydraulik - your partner for high-quality tools for working on ACSR overhead lines and high-voltage infrastructure.Tool for removing the aluminium conductor sheath from AL/ST cables.With adjustable cutting wheel for stripping the aluminium wires on AL/ST cables with conductor cross-sections of 1250-1440 mm²Holder for guide bushesPlease order guide bushes separately (not included in the scope of delivery)All-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts
The stripping tool for overhead lines (ACSR) is a professional special tool for precise stripping of the aluminium conductor sheath of aluminium-steel cables (AL/ST). It is suitable for use with ACSR cables with a conductor diameter of up to 43 mm - ideal for installations in the field of electrical power distribution and overhead line construction.The tool works with an adjustable cutting wheel that enables the outer aluminium wires to be cut cleanly and in a controlled manner without damaging the inner steel core. This ensures tension-proof preparation for connectors or terminations - a crucial step in the professional processing of ACSR cables.The tool is equipped with a holder for guide bushes for precise guidance and adaptation to different cable diameters. Guide bushes are available separately and enable optimum centring during the cutting process.The cutting tool offers a robust, practical solution for energy suppliers, network operators and installation teams in high and medium voltage networks.Available from KW Hydraulik - your partner for high-quality tools for working on ACSR overhead lines and high-voltage infrastructure.Tool for removing the aluminium conductor sheath from AL/ST cables.With adjustable cutting wheel for stripping the aluminium wires of AL/ST cables up to a maximum conductor diameter of 43 mmHolder for guide bushesPlease order guide bushes separately (not included in the scope of delivery)All-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts
The AH500L-230V hydraulic power pack from ERKO is the ideal power source for stationary use in workshops and production. Equipped with a powerful 230V electric motor (0.75 kW), it reliably supplies power to press heads, cutting heads and power rail processing devices with quick-release couplings.It is conveniently operated using the supplied foot switch, while the 2.5 m long hydraulic hose offers maximum flexibility at the workplace. With a delivery rate of 0.66 l/min, compact dimensions and a weight of just 25 kg, the unit can also be used for mobile applications. The operating range is between -25 °C and +40 °C, ideal for a wide variety of working environments.Made for professionals - The AH500L is the right solution for anyone who demands the highest levels of efficiency and compatibility in the field of conductor rail processing and hydraulic systems.Equipped with 2.5 m hydraulic hose with quick-release couplingwith foot switchCompatible with press heads, cutting heads and other devices with quick-release coupling Voltage: 230V AC / 50 HzMotor power: 0.75 kWDelivery rate: 0.66 L/min.Operating temperature: -25°C to +40°C Dimensions: 336x235x406 mmWeight: 25 kg
AS23 is a compact angle grinder/cutting saw, the hydraulic drive is characterised by its power, smooth running and long service life. These features make the AS23-UW particularly suitable for working under water. Electric shocks are ruled out by the hydraulic drive. It can be equipped with Ø 230 mm standard discs or with metal brushes. A cutting disc turns the AS23-UW into a precise cutting saw.The angle grinder stops automatically if the cutting disc jams thanks to the system pressure relief valve. It takes a maximum of 10 seconds for the angle grinder to come to a standstill after the trigger is released. Saw blade diameter: 230 mm, hole Ø 22-23Hydraulics: 20-30 l/min at 140 bar to 180 barCutting depth: 50 mm Circumferential speed of the saw blade: 71 m/sWeight: 5 kgDisc speed: 2200 rpm at 30 l/minSupplied without disc (please order separately)
Basic model from PANASONICInsulated special version for holding insulating bits from our meter installation programme With this cordless torque screwdriver you can work under voltage (1000 V) in conjunction with our galvanically isolated bits. 21-stage torque range 0.3 - 2.9 Nm, max. 4.4 NmThe electronic cut-off enables extremely precise torque accuracy of the clutch: +/-5%. ¼" hexagon socket2 rechargeable batteries (3.6 V / 1.5 Ah Li-Ion) and 1 charger, charging time approx. 15 min.2-speed gearbox, speed: 200/600 min-1Idle speed (1/2 gear): 200/600 min-1Weight: 0.5 kg
This unique combination tool can cut and bend reinforcing steel up to D=16mm.The ASB16C-M18VP cordless hydraulic cutting and bending tool is the ideal solution for cutting and radius bending reinforcing steel with a diameter of Ø 16 mm. Equipped with an integrated battery-powered hydraulic pump (18 V), the tool is ready for immediate use - without the need for a power connection.This tool combines high power reserves with a compact design and is ideal for reinforcement work, refurbishment and corrections on the construction site.Available from KW Hydraulik - your specialist for professional cutting, bending and straightening technology in concrete and steel construction.Product facts:Cutting capacity: Ø 4-16 mmBending capacity: Ø 4-16 mmBending angle: 0-180°Dimensions: 570x285x160 mmWeight: 18 kgDelivery PE-ASB16C-M18VP, incl. 18V/5Ah MAKITA battery and chargerAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts
Rail contact pull-in tool, KKT, ERICO & CEMBRE system, battery-operatedThe tool is used for installing rail contacts (KKT system SK or CEMBRE system AR).Connection thread M9x1.25mm, compatible with expanding mandrels from KKT and CEMBRE.Battery: METABO 18V/5AhThanks to the hose line, the retraction head can be positioned conveniently at any point.Pulling force 63.5 kNWeight: 4 kgAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts
The DOA ASPID is the most compact and lightest hydraulic power pack in the DOA range - specially developed for mobile applications where maximum transportability and sufficient power are required. With a 9 hp petrol engine (Briggs & Stratton) and recoil start (pull starter), this Micro Power Pack is ready for immediate use.Technical details:9 hp petrol engine (Briggs & Stratton) with pull-wire starterDelivery rate: 20 l/minOperating pressure: up to 140 barWith oil tank, air/oil cooling, oil filter and fuel tankFlat face couplings (P+T) for connecting an applianceWeight: 69 kgDimensions: [700x500x570] mmSturdy stainless steel protective frame with castors and handleOn request, the hydraulics can be customised to suit the power unit's performance.
These screening buckets have been specially developed for the fast and effective screening of material.
The HSB series screening buckets are ideal for sorting natural material. This allows the material to be recovered for the desired processing and managed in the best possible way.The HSB series covers several areas of application: primary sorting of waste and demolition material, screening of fill material for excavations and material for rehabilitating stony areas, sorting of pebbles in water currents and cleaning beaches.Simply indispensable in areas where fine material needs to be extracted or where materials need to be sorted into different thicknesses.Manufactured from sustainable steel grades with extremely low wear. This guarantees minimum maintenance and a long service life.Advantages of the HSB series screening buckets:
Screening directly on the construction site. Less transport and landfill costs (less sand in the rubble).Is useful, easy and quick to use.Suitable for large and small construction sites.Ensures that you recycle and save.The size of the screen is easy to change by changing the screen mats.
These screening buckets are connected to the hydraulic hammer function of the excavator.
The BASIC CY120-K sweeper is a robust solution for the effective cleaning of paved surfaces such as roads, pavements, car parks or depots. With a working width of 1.2 to 2.3 metres and a brush diameter of 525 mm, it is ideal for professional use in the municipal or commercial sector.
Equipped with an infinitely variable height adjustment system, three support wheels (⌀ 200 mm) and a sturdy wire polypropylene brush, the machine ensures consistent cleaning performance with minimal wear. The innovative floating suspension system ensures optimum ground tracking - regardless of the carrier vehicle.
Thanks to integrated pallet fork pockets and a universal mounting frame system, the BASIC CY120-K can be quickly and flexibly attached to a wide range of tractors, loaders or forklifts. Winter use is also possible after appropriate conversion.
You can find out more about road cleaning with high-pressure water or brush systems in our blog post.
Discover more attachments for construction, agricultural and municipal machinery in the application areas section or visit the FK Machinery manufacturer page.
Copy of the terrain3 support wheels d= 200 mmPallet fork pocketsWorking angle adjustmentInfinitely variable brush height adjustmentWire polypropylene brush
OGURA HPC-156WDF cordless hydraulic hole punch - Compact, powerful and preciseThe OGURA HPC-156WDF is one of the lightest cordless hydraulic hole punches on the market - ideal for precise work directly on site. Weighing just 7.9 kg including battery, it offers maximum mobility without compromising on performance. The punch is designed for material thicknesses up to 6 mm (S275) and enables clean round and oblong hole punching with high repeat accuracy.Thanks to a punching force of 83.3 kN and a punching time of just 4 seconds, it is an extremely efficient solution for processing flat and sectional steel - even with stainless steel up to 6 mm thick. The jaw depth of 25 mm allows flexible working even in hard-to-reach places.The power supply is provided by an 18 V Li-ion battery, which means that the device can be operated completely independently of the mains - ideal for use on the construction site or in confined workshop conditions. Matching slotted hole inserts, punches and dies are also available.Technical highlights at a glance: OGURAHPC-156WDF - Our lightest cordless hole punch with only 7.9 kg incl. battery.Die depth: 25 mm Punching force: 83.3 kNPunching capacity up to DIN S275 Round hole Ø 4.0 - 15.0 mm Slotted hole 6.5 x 10.0 to 11.0 x 16.5 mm Material thickness 2.0 - 6.0 mm Punching capacity for stainless steel Round hole Ø 6.5 - 15.0 mm Material thickness 3.0 - 6.0 mm Punching time: 4 secondsMotor: 18 Volt DC Li-ion batteryDimensions (L x W x H): 390 x 115 x 293 mmWeight: 7.9 kgdelivery:- HPC-156WDF-M18V- MAKITA 18V/3Ah battery- MAKITA charger- Carrying caseReplaces Handypress HPC-615.
We use cookies to customize the content and ads on our website. In addition, cookies allow us to provide social media features and analyze access to our website.
Enquiry successfully sent
Request could not be sent because a problem occurred. Please try again.
