Construction industry
Echte Experten für jede Baustelle - unsere Werkezuge für das Baugewerbe! Kategorie und Wunschprodukt auswählen, Anfrage stellen und Angebot erhalten!
Filter
–
-
Areas of application
- Tools for electric power distribution
- Hydraulic power packs
- Attachments for construction, agricultural and municipal machinery
- Hydraulics for commercial vehicles / vans
- Steel construction
- Recycling / Demolition
-
Construction industry
- Rescue technology
- Forestry and landscaping / horticulture
- Underwater tools / diving tools
- Pipe construction
- Wind energy / wind turbines
- Solar energy / solar power plants
- Railway engineering
Anbau-Brecherlöffel 0,58 m³ für Bagger von 22 bis 32 Tonnen
Capacity of bucket:
0,58 m³
Schaufelvolumen: 0,58 m³
Gewicht: 2830 kg
Ölbedarf: 130-140 L/min.
Druck: 300 bar
Abmessungen:
A: 900 mm Schaufelbreite B: 2050 mm C: 1330 mmD: 700 mmE: 500 mm
Sieblöffel für Bagger
Diese Sieblöffel sind speziell für das schnelle und effektive Sieben von Material entwickelt worden.
Die HSB-Serie Sieblöffel sind ideal für das Sortieren von natürlichem Material. Dadurch kann das Material für die gewünschte Bearbeitung gewonnen und bestmöglich verwaltet werden.
Die HSB-Serie deckt mehrere Anwendungsgebiete ab: primäre Sortierung von Abfall- und Abbruchmaterial, Sieben von Füllmaterial für Ausgrabungen und Material für das Sanieren steiniger Gebiete, Sortieren von Kieselsteinen in Wasserströmungen und das Säubern von Stränden.
Einfach unverzichtbar in Bereichen, in denen feines Material gewonnen werden muss oder wo Materialien auf verschiedene Stärken sortiert werden müssen.
Gefertigt aus nachhaltigen Stahlsorten mit einem extrem niedrigen Verschleiß. Dadurch ist ein Minimum an Wartung und eine lange Lebensdauer garantiert.Vorteile der HSB-Serie Sieblöffel:
Sieben direkt auf der Baustelle. Weniger Transport- und Deponiekosten (weniger Sand im Schutt).
Ist nützlich, einfach und schnell in der Handhabung.
Geeignet für große und kleine Baustellen.
Sorgt dafür das Sie Recyceln und Einsparen.
Die Maßgröße des Siebes ist einfach zu verändern durch das Wechseln der Siebmatten.
Diese Sieblöffel werden an die hydraulische Hammerfunktion des Baggers angeschlossen.
Attachement pile driver with gripper for concrete piles for excavators from 2 up to 6 tons
Our pile rams allow piles to be driven in by only one operator inside the excavator cabin.
The integrated gripper optimized for picking up concrete piles.
Striking force: 3000 kg
Frequency: 2000 min-1
Weight: 320 kg
Maximum opening of the gripper: 220 mm
Hydraulic vibrator: 40 L / min. at 150 bar
Hydraulic gripper: 10-20 L / min. at 150 bar
Recommended excavator weight: 2 to 6 tons
Attachement pile driver with gripper for wooden piles for excavators from 2 up to 6 tons
Our pile rams allow piles to be driven in by only one operator inside the excavator cabin.
The integrated gripper optimized for picking up wooden posts.
Striking force: 3000 kg
Frequency: 2000 min-1
Weight: 320 kg
Maximum opening of the gripper: 220 mm
Hydraulic vibrator: 40 L / min. at 150 bar
Hydraulic gripper: 10-20 L / min. at 150 bar
Recommended excavator weight: 2 to 6 tons
AV28 - hydraulically driven blower, 2,000 m³ / h
Capacity: 2,000 m³/h
Air outlet: D = 200 mm
Drive: 20-40 L /min at 140 bar
Dimensions: 70x60x50 cm
Weight: 25 kg
BCP20 - Battery-powered hydraulic steel cutter, 20 mm
Material thickness up to D = 20mm
Cutting force: 130 kN
For steels up to R = 690 N / mm²
DEWALT 18 volt / 5.0 Ah Li-Ion battery
Rotatable cutting head
40% ED S3
Scope of delivery:- Steel cutter- 1x 18Volt / 5.0Ah DEWALT Li-Ion battery- charger- Suitcase
CC315 - Handgeführte Abbruchzangen, Zweimannbedienung, Öffnung 315 mm
Opening jaw:
315 mm
For connection to a hydraulic unit for double-acting tools with 700 bar working pressure.
It is recommended to hang the tool on a balancer for better handling.
Opening width: 315 mm
Force: 294 kN (133 kN at the tip at 170 mm opening)
Maximum wall thickness- 30 cm of concrete with a strength of 325 N / mm²Dimensions: 740x860x180 mm
Weight: 52 kg
The short tips supplied come together up to 87 mm.
The pliers close using the long tips. (Order separately)
DCS350 - Akku-mechanischer Gewindestangenschneider, M 6/8/10/12
Bequemes Ablängen oder Trennen von Gewindestangen Sicherer Einsatz durch exakte Fixierung der Gewindestangen sowie funken- und metallsplitterfreies ArbeitenGeeignet für Gewindestangen in den Größen M6, M8, M10 und M12
Kein Nacharbeiten des Gewindes
Anzahl Schnitte in M10 pro 2,0 Ah Akku-Ladung > 200Sehr wirtschaftlicher Einsatz durch keinen Zukauf einzelner, zeitaufwendig zu montierenden Schneidköpfen in verschiedenen Größen sowie sehr hohe Lebensdauer der Schneidkopf-Messer von ca. 5.000 SchnitteGut zum nachträglichen Ablängen bereits montierter Gewindestangen
In der Elektroinstallation, im Klima-, Lüftungs- und Heizungsbau unentbehrlich
Werksseitig ausgestattet mit Messer M8, 4-seitig verwendbarLieferumfang: - Gewindestangenschneider- 2x 18 Volt Akku- Koffer
DOA AH15 - Hydraulic motor for driving pipe drilling / Hot tapping equipment
This slowly rotating tool is suitable:
As a drive for drilling gas and water pipes
For opening and closing gas and water valves
For raising and lowering the upper decks of car trains
Properties
The speed is continuously regulated using the twist grip.
Immediate stop when the handle is released.
The tool has a right / left rotation
Use in potentially explosive areas is possible
Use under heavily soiled conditions and extreme wetness is possible.
Adjustable torque
Can be used at low and high temperatures
Revolution counter (for model VO-30)
DOA AK46G - Handgeführte hydraulische Kernbohrmaschine D=50-160mm
Sicherheitsventil mit Abschaltung beim Verhaken
84 Nm max. Drehmoment
Wasseranschluss
Aufnahmedorn: 1-1/4" außen
, 1/2" innenHydraulik: 20-34 L/min. bei 105-170 bar, Rückstaudruck: 90 bar
Bohrdurchmesser: ø 50 - 160 mmDrehzahl: 400-600 min-1Abmessungen: 9x32x40 cmGewicht: 8 kg
DOA AK46GUW - Handgeführte hydraulische Kernbohrmaschine D=50-160mm - Unterwasserversion
Sicherheitsventil mit Abschaltung beim Verhaken
84 Nm max. Drehmoment
Wasseranschluss
Aufnahmedorn: 1-1/4" außen
, 1/2" innenHydraulik: 20-34 L/min. bei 105-170 bar, Rückstaudruck: 90 bar
Bohrdurchmesser: ø 50 - 160 mmDrehzahl: 400-600 min-1Abmessungen: 9x32x40 cmGewicht: 8 kgUnterwasserversion für Taucharbeiten
DOA AK46S - Handgeführte hydraulische Kernbohrmaschine D=20-100mm
Sicherheitsventil mit Abschaltung beim Verhaken
84 Nm max. Drehmoment
Wasseranschluss
Aufnahmedorn: 1-1/4“ AußengewindeHydraulik: 20-34 L/min. bei 105-170 bar, Rückstaudruck: 90 bar
Bohrdurchmesser: ø 20 - 100 mmDrehzahl: 1000-1500 min-1Abmessungen: 9x32x40 cmGewicht: 8 kg
DOA AK46SUW - Handgeführte hydraulische Kernbohrmaschine D=20-100mm - Unterwasserversion
Sicherheitsventil mit Abschaltung beim Verhaken
84 Nm max. Drehmoment
Wasseranschluss
Aufnahmedorn: 1-1/4“ AußengewindeHydraulik: 20-34 L/min. bei 105-170 bar, Rückstaudruck: 90 bar
Bohrdurchmesser: ø 20 - 100 mmDrehzahl: 1000-1500 min-1Abmessungen: 9x32x40 cmGewicht: 8 kgUnterwasserversion für Taucharbeiten
DOA AK50-100cc - Handgeführte hydraulische Kernbohrmaschine D=125-250mm - Unterwasserversion
(13.4) Antriebsmotor für AK-50:
100 cc Motor
Kernbohrmaschinen zum Anbau an Lafetten. Der Hydraulikmotor kann schnell ausgewechselt werden. Dies
ermöglicht einen weiten Anwendungsbereich und senkt die Kosten.Eigenschaften: Motor:100 cc Hydraulikmotor für 125-250 mm Durchmesser
D = 130-250 mm - 300 min-1 bei 30 L/min.D = 125-180 mm - 380 min-1 bei 38 L/min.Standardaufnahme für BohrständerWasseranschluss
Aufnahmedorn: 1-1/4" außen
, 1/2" innenHydraulik: 30-40 L/min. bei 200 bar, Rückstaudruck: 90 bar
Bohrdurchmesser: ø125-ø250 (je nach montiertem Motor )
Drehzahl: 300-380 min-1 (je nach montiertem Motor)Abmessungen: 54x22 cmGewicht: 13 kgUnterwasserversion für Taucharbeiten
DOA ASPID-GETZ - Hydraulic power pack with wireless remote control for 6 functions
Hydraulic power pack for the operation of hydraulic devices such as winches or double-acting cylinders that have to be controlled remotely.
The machine is equipped with modern wireless remote control electronics that control the hydraulic functions via a portable console.For hydraulic motors
the functions of clockwise/stop/anti-clockwise rotation with speed control up to a distance of 80 meters from the control unit.For hydraulic cylindersthe functions press/hold/retract with speed control up to a distance of 80 meters from the power pack.In the event of a failure of the electronic remote control, the power pack allows normal use with manual control only hydraulic, can therefore be used with the same functions regardless of remote control, the pressure gauge indicates the load value allowing an accurate adjustment of the movements. The weight and the dimensions contained at the maximum guarantee excellent portability and mobility both on board the vehicles and on the ground. ASPID GETZ has an accurate build quality, is manufactured with the best materials and components to guarantee a long and trouble-free service.Technical specifications:
Oil delivery rate: 12 L / min at max. 140 bar
Engine: 6 HP Briggs & Stratton, gasoline
Start: pull-wire and electric starter
Speed control, manual
Oil tank: 7 liters
Flat-Face quick connector 3/8 "
Radio remote control, range 80 meters
Dimensions: 700x500x570mm
Weight: 62 kg
DOA ASPID-GETZ - Hydraulic power pack with wireless remote control for 6 functions
Hydraulic power pack for the operation of hydraulic devices such as winches or double-acting cylinders that have to be controlled remotely.
The machine is equipped with modern wireless remote control electronics that control the hydraulic functions via a portable console.For hydraulic motors
the functions of clockwise/stop/anti-clockwise rotation with speed control up to a distance of 80 meters from the control unit.For hydraulic cylindersthe functions press/hold/retract with speed control up to a distance of 80 meters from the power pack.In the event of a failure of the electronic remote control, the power pack allows normal use with manual control only hydraulic, can therefore be used with the same functions regardless of remote control, the pressure gauge indicates the load value allowing an accurate adjustment of the movements. The weight and the dimensions contained at the maximum guarantee excellent portability and mobility both on board the vehicles and on the ground. ASPID GETZ has an accurate build quality, is manufactured with the best materials and components to guarantee a long and trouble-free service.Technical specifications:
Oil delivery rate: 12 L / min at max. 140 bar
Engine: 6 HP Briggs & Stratton, gasoline
Start: pull-wire and electric starter
Speed control, manual
Oil tank: 7 liters
Flat-Face quick connector 3/8 "
Radio remote control, range 80 meters
Dimensions: 700x500x570mm
Weight: 62 kg
DOA HD13 - Hydraulischer Bohrhammer mit SDS-PLUS Bohrfutter - Unterwasserversion
Der HD-13 Bohrhammer ist ein Schlagbohrer für Bohrungen in Fels, Beton, oder Mauerwerk mit
SDS-MAX Einsätzen. Er kann auch als Meißel-Hammer verwendet werden.
Hydraulik: 20-25 L/min. @ 140-170 barDrehzahl: 400 min-1 bei 25 L/min.
Schlagzahl: 2000 min-1 HaltegriffSDS-MAX WerkzeugaufnahmeDrehzahlbegrenzungAbmessungen: 52 cm
Gewicht: 13 kg
DOA SP20 - Hydraulically driven submersible pump with open inlet, 800 L / min.
Built-in powerful portable slurry pump.Maximum delivery rate: 800 L / min.
Maximum head: 35 meters
max.passage: 30 mm
Hydraulic inlet: 15-30 L / min. at 100-210 bar
Hose connection: 2 "BSP-IG
Weight: 8 kg
ATEX version available: DOA SP-21-ATEXSubmersible (no preparation required)
Absolutely maintenance free
Drying out without any damage
Lifting eye and handle
Hose whips with flat-face connections (ISO-16028)
Conditionally suitable for salt water. Clean after use. No 24 hour operation in salt water possible.
DOA SP21-ATEX - Hydraulically driven submersible pump with open inlet, 800 L / min.
SP21 is a compact and powerful submersible trash pump with cast iron hydraulic motor.
The pump is ATEX approved and has been designed to pump in explosive environment of:
- flammable liquids
- water in presence of explosive vapours
- base petroleum liquids,
- loaded fluids and liquid with high viscosity
Flow is up to 800 L/min, the water headv 35 metres with capacity of pumping suspended solids with dimension 30 mm.Maximum delivery rate: 800 L / min.
Maximum head: 35 meters
max.passage: 30 mm
Hydraulic inlet: 15-30 L / min. at 100-210 bar
Hose connection: 2 "BSP-IG
Weight: 8 kg
ATEX version available: DOA SP-21-ATEXSubmersible (no preparation required)
Absolutely maintenance free
Drying out without any damage
Lifting eye and handle
Hose whips with flat-face connections (ISO-16028)
Conditionally suitable for salt water. Clean after use. No 24 hour operation in salt water possible.
DOA SP35 - Hydraulically driven submersible pump with open inlet, 1600 L / min.
Built-in powerful portable slurry pump.Maximum delivery rate: 1.600 L / min.
Maximum head: 35 meters
max.passage: 50 mm
Hydraulic inlet: 15-38 L / min. at 100-210 bar
Hose connection: 3 "BSP-IG
Weight: 28 kg
ATEX version available: DOA SP-36-ATEXSubmersible (no preparation required)
Absolutely maintenance free
Drying out without any damage
Lifting eye and handle
Hose whips with flat-face connections (ISO-16028)
Conditionally suitable for salt water. Clean after use. No 24 hour operation in salt water possible.
DOA SP36 ATEX - Hydraulically driven submersible pump with open inlet, 1600 L / min.
Built-in powerful portable slurry pump.Die Pumpe ist ATEX-zugelassen und wurde entwickelt, um in explosionsgefährdeten Umgebungen zu pumpen von:- Entflammbare Flüssigkeiten- Wasser in Gegenwart von explosiven Dämpfen- Basisölflüssigkeiten,- geladene Flüssigkeiten und Flüssigkeiten mit hoher ViskositätMaximum delivery rate: 1.600 L / min.
Maximum head: 35 meters
max.passage: 50 mm
Hydraulic inlet: 15-38 L / min. at 100-210 bar
Hose connection: 3 "BSP-IG
Weight: 28 kg
Submersible (no preparation required)
Absolutely maintenance free
Drying out without any damage
Lifting eye and handle
Hose whips with flat-face connections (ISO-16028)
Conditionally suitable for salt water. Clean after use. No 24 hour operation in salt water possible.
DOA SP45 - Hydraulically driven submersible pump with open inlet, 3000 L / min.
Extremely powerful portable slurry pump.
Maximum delivery rate: 3,000 L / min.
Maximum head: 16 meters
max.passage: 70 mm
Hydraulic inlet: 20-45 L / min. at 140 bar
Hose connection: 4 "BSP-IG
Weight 25 kg
With the optional SG-4 vortex head, it enables sediments to be swirled up and then pumped out.
Due to the large inlet opening, it guarantees a large free passage and clog-free operation.
Submersible (no preparation required)
Absolutely maintenance free
Working pressure 140 bar
Drying out without any damage
Lifting eye and handle
Hose whips with flat-face connections (ISO-16028)
Wing nut for easy bowl changes and cleaning
Conditionally suitable for salt water. Clean after use. No 24 hour operation in salt water possible.
DOA SP45-ATEX - Hydraulically driven submersible pump with open inlet, 3000 L / min.
Extremely powerful portable slurry pump.ATEX versionMaximum delivery rate: 3,000 L / min.
Maximum head: 16 meters
max.passage: 70 mm
Hydraulic inlet: 20-45 L / min. at 140 bar
Hose connection: 4 "BSP-IG
Weight 25 kg
With the optional SG-4 vortex head, it enables sediments to be swirled up and then pumped out.
Due to the large inlet opening, it guarantees a large free passage and clog-free operation.
Submersible (no preparation required)
Absolutely maintenance free
Working pressure 140 bar
Drying out without any damage
Lifting eye and handle
Hose whips with flat-face connections (ISO-16028)
Wing nut for easy bowl changes and cleaning
Conditionally suitable for salt water. Clean after use. No 24 hour operation in salt water possible.
DOA SP55 - Hydraulically driven submersible pump with open inlet, 8000 L / min.
Extremely powerful portable slurry pump.
Maximum delivery rate: 5,500 L / min.
Maximum head: 29 meters
max.passage: 55 mm
Hydraulic inlet: 50-100 L / min. at 150-350 bar
Hose connection: 5"BSP-IG
Weight 95 kg
Attachment device for excavators available
Cuts on the impeller shred larger suspended matter. Clogging of the lines is minimized.Due to the large inlet opening, it guarantees a large free passage and clog-free operation.
Submersible (no preparation required)
Absolutely maintenance freeDrying out without any damage
Lifting eye and handle
Hose whips with flat-face connections (ISO-16028)
Wing nut for easy bowl changes and cleaning
Conditionally suitable for salt water. Clean after use. No 24 hour operation in salt water possible.
Tools for the construction industry
- auger
- Hammer drills
- Drills / Screwdrivers / Core Drills
- pile drivers
- Vibratory plates / vibrating plates / vibration valves
- Horizontal and vertical drilling machines
- cover lifter
- Baggerlöffel
- Angle Grinder / Grinder / Grinder
- submersible pumps
- auger
- Hammer drills
- Drills / Screwdrivers / Core Drills
- pile drivers
- Vibratory plates / vibrating plates / vibration valves
- Horizontal and vertical drilling machines
- cover lifter
- Baggerlöffel
- Angle Grinder / Grinder / Grinder
- submersible pumps