HYCON

AS23 is a compact angle grinder/cutting saw, the hydraulic drive is characterised by its power, smooth running and long service life. These features make the AS23-UW particularly suitable for working under water. Electric shocks are ruled out by the hydraulic drive. It can be equipped with Ø 230 mm standard discs or with metal brushes. A cutting disc turns the AS23-UW into a precise cutting saw.The angle grinder stops automatically if the cutting disc jams thanks to the system pressure relief valve. It takes a maximum of 10 seconds for the angle grinder to come to a standstill after the trigger is released. Saw blade diameter: 230 mm, hole Ø 22-23Hydraulics: 20-30 l/min at 140 bar to 180 barCutting depth: 50 mm Circumferential speed of the saw blade: 71 m/sWeight: 5 kgDisc speed: 2200 rpm at 30 l/minSupplied without disc (please order separately)

The HYCON PREMIUM cut-off saw cuts all types of concrete, steel, masonry, asphalt, etc. The HYCON cut-off saw is a very robust tool for cutting work even under the most extreme conditions. It is completely insensitive to water and dust and all parts run in oil. The HYCON PREMIUM saws are designed for tough, daily use - without failures.The fact that the saw works non-stop and requires no maintenance makes the tool more profitable than a petrol saw, for example. The saw stops automatically if the saw blade jams due to the system pressure relief valve. After releasing the trigger, it takes a maximum of 10 seconds for the blade to come to a standstill. This means there is no risk of injury to the operator. The HYCON hydraulic cut-off saw is suitable for both horizontal and vertical cutting work. High-quality motor with hydraulic direct drive ensures low maintenance. For additional cooling and to keep all surfaces cool, the housing and hydraulic motor are flushed with flushing water.Saw blade diameter: 350 mmHydraulics: 20-30 l/min at 120 bar max. 172 barCutting depth: 137 mm Circumferential speed of the saw blade: 71 m/sWeight: 7.4 kgSupplied without disc (please order separately)

The HYCON PREMIUM cut-off saw cuts all types of concrete, steel, masonry, asphalt, etc. The HYCON cut-off saw is a very robust tool for cutting work even under the most extreme conditions. It is completely insensitive to water and dust and all parts run in oil. The HYCON PREMIUM saws are designed for tough, daily use - without failures.The fact that the saw works non-stop and requires no maintenance makes the tool more profitable than a petrol saw, for example. The saw stops automatically if the saw blade jams due to the system pressure relief valve. After releasing the trigger, it takes a maximum of 10 seconds for the blade to come to a standstill. This means there is no risk of injury to the operator. The HYCON hydraulic cut-off saw is suitable for both horizontal and vertical cutting work. High-quality motor with hydraulic direct drive ensures low maintenance. For additional cooling and to keep all surfaces cool, the housing and hydraulic motor are flushed with flushing water.Saw blade diameter: 400 mmHydraulics: 20-40 l/min at 120 max. 172 barCutting depth: 162 mm Circumferential speed of the saw blade: 81 m/sWeight: 7.8 kgSupplied without disc (please order separately)

The HYCON PREMIUM cut-off saw cuts all types of concrete, steel, masonry, asphalt, etc. The HYCON cut-off saw is a very robust tool for cutting work even under the most extreme conditions. It is completely insensitive to water and dust and all parts run in oil. The HYCON PREMIUM saws are designed for tough, daily use - without failures.The fact that the saw works non-stop and requires no maintenance makes the tool more profitable than a petrol saw, for example. The saw stops automatically if the saw blade jams due to the system pressure relief valve. After releasing the trigger, it takes a maximum of 10 seconds for the blade to come to a standstill. This means there is no risk of injury to the operator. The HYCON hydraulic cut-off saw is suitable for both horizontal and vertical cutting work. High-quality motor with hydraulic direct drive ensures low maintenance. For additional cooling and to keep all surfaces cool, the housing and hydraulic motor are flushed with flushing water.Saw blade diameter: 500 mmHydraulics: 30-40 l/min at 120 bar max. 172 barCutting depth: 212 mm Circumferential speed of the saw blade: 59 m/sWeight: 9.2 kgSupplied without disc (please order separately)

Weight: 9.9 kgVibration level: 9.6 m/s²Impact energy: 22 JImpact frequency: 2100 min-1Tool size: Hex. 19x50 mmHydraulic requirements: 20 L/min at 100-160 bar

Weight: 9.9 kgVibration level: 9.6 m/s²Impact energy: 22 JImpact frequency: 2100 min-1Tool size: Hex. 19x50 mmHydraulic requirements: 20 l/min at 100-160 bar Special version for working under water

Weight: 19.2 kgVibration level: 6.6 m/s²Impact energy: 40 JImpact frequency: 1830 min-1Tool size: Hex. 22x82 mmHydraulic requirements: 20 l/min at 100- 160 bar

Weight: 22 kgVibration level: 6.8 m/s²Impact energy: 60 JImpact frequency: 1560 min-1Tool size: Hex. 25x108 mmHydraulic requirements: 20 l/min at 100- 160 bar

Weight: 23.9 kgVibration level: 4.8 m/s²Impact energy: 60 JImpact frequency: 1560 min-1Tool size: Hex. 32x160 mmHydraulic requirements: 20 L/min at 100-160 bar

Weight: 23.4 kgVibration level: 8.0 m/s²Impact energy: 85 JImpact frequency: 1380 min-1Tool size: Hex. 25x108 mmHydraulic requirements: 20 L/min at 120-160 bar

Weight: 23.5 kgVibration level: 8.0 m/s²Impact energy: 95 JImpact frequency: 1380 min-1Tool size: Hex. 25x108 mmHydraulic requirements: 30 L/min at 120- 160 bar

Weight: 25.4 kgVibration level: 9.4 m/s²Impact energy: 85 JImpact frequency: 1380 min-1Tool size: Hex. 32x160 mmHydraulic requirements: 20 L/min at 120-160 bar

Weight: 25.8 kgVibration level: 9.4 m/s²Impact energy: 95 JImpact frequency: 1380 min-1Tool size: Hex. 28x160 mmHydraulic requirements: 20 L/min at 120- 160 bar

Weight: 25.8 kgVibration level: 9.4 m/s²Impact energy: 95 JImpact frequency: 1380 min-1Tool size: Hex. 32x160 mmHydraulic requirements: 20 L/min at 120- 160 bar

Weight: 27.4 kgVibration level: 10.7 m/s²Impact energy: 105 JImpact frequency: 1260 min-1Tool size: Hex. 32x152 mmHydraulic requirements: 30 L/min at 130-160 bar

Weight: 27.4 kgVibration level: 10.7 m/s²Impact energy: 105 JImpact frequency: 1260 min-1Tool size: Hex. 32x160 mmHydraulic requirements: 30 L/min at 130-160 bar

Weight: 29.4 kgVibration level: 10.7 m/s²Impact energy: 130 JImpact frequency: 1100 min-1 at 30 L/min or 1440 min-1 at 40 L/minTool size: Hex. 28x160 mmHydraulic requirements: 30-40 L/min at 130-160 bar

Weight: 29.4 kgVibration level: 10.7 m/s²Impact energy: 130 JImpact frequency: 1100 min-1 at 30 L/min or 1440 min-1 at 40 L/minTool size: Hex. 32x152 mmHydraulic requirements: 30-40 L/min at 130-160 bar

Weight: 29.4 kgVibration level: 10.7 m/s²Impact energy: 130 JImpact frequency: 1100 min-1 at 30 L/min or 1440 min-1 at 40 L/minTool size: Hex. 32x160 mmHydraulic requirements: 30-40 L/min at 130-160 bar

The HYCON HPD is a powerful hydraulic pile driver for driving posts, profiles, signs, fences and ground anchors with a diameter of up to 130 mm. The compact, mobile device is ideal for use in agriculture and forestry, in gardening and landscaping as well as on construction sites in civil engineering and pipeline construction.The pile driver operates with an oil flow of 30 l/min at a working pressure of 100 bar. The integrated nitrogen pressure accumulator ensures even energy transfer. With flat-face connections (ISO-16028), guide handles and a vibration value of just 9.4 m/s², the device fulfils high ergonomic and safety requirements.Features:Nitrogen pressure accumulatorHose whips with flat-face connections (ISO-16028)Guide handlesOil flow: 30 litres/min.Working pressure: 100 barMax. Pressure relief valve: 160 barSound pressure level 1m: 96 LPA dBVibration level, (3 axes): 9.4 m/s²Possible optional accessories:HY-HPD adapter1: 65x65 mmHY-HPD adapter2: 110x110 mmHY-HPD adapter3: D=60 mmHY-HPD adapter4: D=80 mmHY-HPD adapter5: D=105 mmHY-HPD adapter6: D=130 mm

This hydraulically operated pile driver from HYCON is designed for the powerful driving of stakes, profiles, fences, signs and ground anchors with a diameter of up to 130 mm. It is used wherever robust and reliable technology is required, for example in forestry, gardening and landscaping or on construction sites in the general construction industry. The integrated remote release and the ergonomically arranged guide handles make handling easier in daily use. A nitrogen pressure accumulator ensures even impact transmission, while the flat-face hydraulic connections (in accordance with ISO-16028) enable a secure and drip-free connection. Features:Nitrogen accumulatorRemote release, hose whips with flat-face connections (ISO-16028)Guide handlesOil flow: 30 litres/min.Working pressure: 100 barMax. Pressure relief valve: 160 barSound pressure level 1m: 96 LPA dBVibration level, (3 axes): 9.4 m/s²Possible optional accessories: HY-HPD adapter1: 65x65 mmHY-HPD adapter2: 110x110 mmHY-HPD adapter3: D=60 mmHY-HPD adapter4: D=80 mmHY-HPD adapter5: D=105 mmHY-HPD adapter6: D=130 mm

The HYCON HRD28X is a powerful, hand-held hydraulic rotary hammer with connection for air flushing, specially designed for demanding drilling work in granite, concrete or masonry. With its robust impact and rotation unit and the option of combining it with a compressor, it delivers reliable results even when drilling deep holes of up to 6 metres. Thanks to the HEX 22x108 mm shank size and its high rotation (320 min-¹) and impact frequency (40 Hz), the HRD28X is ideal for drilling anchor holes, blast holes or splitting hard rock types. This device really comes into its own in confined spaces where no drill rig can be used. With an operating pressure of 130-172 bar at 30 l/min and a low weight of just 27.5 kg, the HRD28X remains easy to handle even when used for long periods. The low vibration level and air flushing also enable clean and efficient work - the rotary hammer can even be used under water and is therefore the preferred equipment of professional diving teams. The HRD28X is manufactured by HYCON and is ideal for applications in the construction industry, steel construction and underwater technology. The HYCON HRD-28-X is a hand-held high-performance hammer drill for the heaviest drilling tasks in granite and concrete and up to 6 m drilling depth.The use of standard integral drill steel with air flushing from an external compressor in combination with a powerful hydraulic impact and rotation unit makes the HRD-28-X a lighter, powerful and efficient rotary hammer. The HRD-28-X is ideal for making anchor holes and for blasting or splitting holes between 25 and 50 mm when you need to drill deeper with maximum air flushing. Together with a compressor of your choice, it is suitable for underwater drilling and is therefore the drilling tool favoured by professional divers. Because this hammer drill utilises the benefits of both hydraulics and pneumatics, it can be used anywhere, drill deeper and still be light enough to work with for many hours. Simply connect it to one of the compact HYCON hydraulic power packs and a compressor - and you're ready to go. Made for underwater and deep drilling For deeper hand-guided drilling in confined spaces that do not allow a drill rigLow weightPerfect for drilling holes for explosives or chemicals where more depth is requiredRecommended for drilling in granite with a depth of up to 6 m / Ø34 mm (depending on compressor)Contact one of our sales representatives for recommendations for deeper and wider holesHydraulics: 30 L/min at 130-172 barDrill steel shank size: HEX 22x108 mm Speed (anti-clockwise ccw): 320 min-1 Impact frequency: 40 Hz Sound power level: 105 dB LWADrilling flushing air: 10 m³/h Vibration level (3 axes): 13 m/s2 Dimensions: 708x460 mmWeight: 27.5 kg