Promove Demolition

Weight: 380–3,588 kgExcavator weight: 1–50 tonnesHydraulics: 60–110 L/min at 300 bar to 350–450 L/min at 350 barForce at the outer tip (F1): 26–102 tonnesForce at the centre (F3): 80–347 tonnesLength (A): 1,070–2,491 mmOpening width (B): 420–1,204 mmWidth (D): 320–600 mmWidth (E): 195–480 mmRobustness: Highly reinforced HARDOX structureProtection: Full protection of the cylinder rod via a reverse-acting cylinderSpeed: Exclusive high-speed valve to reduce cycle time (CF200–CF350)Productivity: Large gripper opening and width for more shredded material per cycleForce: Oversized cylinder for high clamping forceService life: Reversible blades, HARDOX wear plate and replaceable teeth on site Reliability: Oversized pins, well protected against accidental impacts

Multiprocessor – base unit with two working cylinders.Integrated hydraulic rotation.By swapping the gripper arms, these tongs can be optimised for a variety of applications.Multiprocessor: Weight: 188–3,385 kgFor excavators: 1.5–48 tonnesForce: max. 162 tonnesPR grapple arms (optional): Crusher for primary demolition; optimised for gripping and breaking walls and ceilings. Cutting blades for steel reinforcement bars; four interchangeable tooth tips; two interchangeable and rotatable cutting bladesOpening: 326–1,205 mmSteel reinforcement:FR grapple arms (optional):Pulveriser for secondary demolition; the angled, wide pulveriser facilitates the crushing of demolition rubble lying on the ground; the cutting blades sever steel reinforcementOpening: max. 1010 mmSC grapple arms (optional):Scrap shears cut through metal structures, cables, pipes, etc.Opening: max. 580 mmI-beams: max. 360 mmH-beams: max. 280 mmBars: max. 65 mmFR-KIT for PR demolition tongs (optional):Converts the PR primary demolition tongs into a small pulveriser for secondary demolitionOpening width: 767 mm

Weight: 460–3,400 kgExcavator weight: 5–45 tonnesHydraulics: 50–90 L/min at 280 bar to 300–350 L/min at 350 barRotation: 10–12 L/min at 100 bar to 50–60 L/min at 120 barForce at the outer tip (F1): 25–110 tonnesForce at the centre (F3): 68–380 tonnesLength (A): 1255–2735 mmOpening width (B): 460–1010 mmWidth (D): 320–490 mmWidth (E): 175–314 mmRobustness: HARDOX-reinforced structure and oversized thrust washer with double ball rotationProtection: Full protection of the cylinder rod via a reverse-acting cylinderSpeed: Exclusive high-speed valve to reduce cycle time (CR2000–CR3600)Efficiency: Large grapple opening, compact design and manoeuvrability of the attachment; also ideal for demolition work at great heightsPower: Oversized cylinder for high clamping forceSafety: Motor protection valve against high pressure spikesService life: Reversible blades, HARDOX wear plates replaceable on site and replaceable teethReliability: Oversized pins, well protected against accidental impacts

HG-PLUS Series Demolition Grabs, Heavy-duty SeriesSpecificationsWeight: 1,900 kgExcavator weight: 25–38 tonnesHydraulics: Grapple: Flow rate: 180 L/min at 350 barRotation: Flow rate: 35 L/min at 190–210 barForce: 80 kN  Height (A): 1,650 mmMouth depth (B): 545 mmOpening width (C): 2,200 mm  Cutting width (D): 1,200 mm  Capacity: 900 LDescriptionReplaceable and reversible cutting blade Large hopper opening and high loading capacity360° rotation Minimal wear thanks to countersunk blade pins and nuts (inside and outside)Cylinder with end fitting; no mechanical blocks required on the jaws Safety valve to protect against high pressure peaks and overflow Safety non-return valve to maintain gripping forceCompact design: one of the lowest profiles on the marketEfficiency and power: two hydraulic motors and two drive wheels for better power and torque distributionStrength: shells made entirely from HARDOX

PO Series Multi-shell GrabsLarge bucket opening and high loading capacity360° rotation The half-shells are particularly suitable for demolition work and for handling scrap metal and loose material.Robustness and durability: Manufactured from high-strength, wear-resistant structural materialsDurability: robust frame; hardened bushings and heat-treated pinsSafety: Each valve has a dedicated, protected cylinderEase of maintenanceReinforced version for excavators from 14 to 23 tonnesSpecificationsWeight: Excavator weight:Hydraulic grapple: Hydraulic rotation: Power: Capacity: Height (A): Opening width (C):

Selecting a hydraulic hammer Any instructions provided by the carrier manufacturer are always binding. The correct matching of the hammer to the carrier machine depends on various factors, e.g. the weight of the carrier machine, hydraulic parameters (pressure, oil flow), boom and arm configuration, as well as the tasks to be performed by the equipment. We are always on hand to provide expert information and recommendations for the optimal and most cost-effective configuration. A heavy hammer is recommended for the following: Crushing medium to hard rock Heavy-duty work Hydraulic excavators with monobloc boom Direct extraction in quarries Continuous operation The use of light hammers is recommended for: Breaking up concrete and soft rock Light-duty applications Mounting on light excavators/multi-purpose machines Secondary crushing in quarries Occasional work

Chisel diameter: 42 mmHydraulics:Oil flow rate: 15 L/minOperating pressure: 110 barImpact energy: 210 JImpact rate: 526 min⁻¹Carrier vehicle weight: 0.8 to 1.8 tWeight: 85 kg

PV Series Multi-shell GrabsHigh-performance multi-bucket grabs for heavy-duty handling: scrap metal, solid waste, organic residuesLarge bucket opening and high loading capacity360° rotation (continuous rotation)The half-shells are particularly suitable for gripping scrap metal and loose material.Safety features: Hydraulic braking when the cylinder opens; boom fully enclosedRobustness and durability: Sturdy and flexible structure with mechanical limit switches for opening and closingEase of maintenanceSpecificationsWeight:Excavator weight:Hydraulic grapple: Hydraulic rotation:Power:Capacity:Height (A):Opening width (C):

SC scrap shears for cutting steel structures and scrap metal.The SC series scrap shears have been specially developed for the demolition of heavy steel structures and the cutting of scrap metal. The shape of the shears’ jaws has been designed to cut steel effectively. The blades in the jaws of the shears are made from specially hardened tool steel. This guarantees a long service life.Some advantages of the SC scrap shears: Replaceable blades. Special blades on the shears’ jaws eliminate the need for welding. Manufactured from wear-resistant Hardox-400® steel. Fitted with a high-speed valve for an extremely fast working cycle. Fitted with a double-bearing slewing ring and a reinforced rotary motor. Wide slewing ring suitable for harsh and extreme working conditions.Strength: Manufactured from the highest-quality structural and wear-resistant steelProtection and cutting performance: Full protection of the cylinder rod thanks to the inverted cylinderSafety: Motor protection valve against high pressure spikes and overflowSpeed: Exclusive high-speed valve to reduce cycle time (SC2500–SC10000)Precision: Cutting gap system guarantees precise cut linesControl: Double-guided cutting gap system guarantees precise cutting lines and prevents unwanted bending of the moving grippersDurability: Replaceable cutting blades (4x)Reliability: 360° continuous rotation

SG series demolition grapples, light-duty range from 115 to 780 kg for excavators from 1 to 16 tonnes Load-holding valve fitted as standard (SG 3.4 – SG10.16)Replaceable and reversible wear blades (SG2.3 – SG10.16) Large openings and high capacity High closing force Compact design, low weight and short overall height Continuous 360° hydraulic rotation Easily accessible grease nipplesSafety valve to protect against high pressure spikes and excessive flow rates

SGF series demolition grapples without rotation, light-duty series, from 55–750 kg for excavators from 0.7–20 tonnes Load-holding valve as standard (SGF 3.4 – SGF10.16)Replaceable and reversible wear blades (SGF2.3 – SGF10.16) Large openings and high capacity High closing force Compact design, low weight and short overall height Easily accessible grease nipplesSafety valve to protect against high pressure peaks and excessive flow ratesSpecificationsWeight: 55–740 kgExcavator weight: 0.7–20 tonnesHydraulics: 15–30 L/min at 200 bar to 60–70 L/min at 300 barForce: 8–43 tonnesHeight without rotation (A): 410–950 mmDigging depth (B): 220–585 mmOpening width (C): 750–1,950 mmGrapple width (D): 300–1,000 mmCapacity: 23–650 litres

Protection against pressure spikes and excessive oil flow rates.Perfect for using the hammer in a hire park.