Hydraulic Pumps

This pump operates in any position and is suitable due to their light weight and the  supplied neck strap is ideal for mobile use Pressure switch off at maximum pressure is reached Mode: Cutting / Crimping Thermal fuse to prevent overheating State of charge control Turnable hydraulic connection Optionally available solid transport case Shipment: - BGH-700 Battery Electric Hydraulic Pump - Remote control 2m - DEWALT rechargeable battery  18 V / 5,0 Ah Li-Ion - DEWALT Charger

For use with internally fitted battery or mains operation 230V/50Hz up to 700bar Automatic recognition of pressure demand with cut off function when required pressure is reached (20-700 bar). Useable for all tools with an oil demand up to 1,8 literMaximum output oil pressure can be preset by software to suit customers requirements, e.g. 700bar Energy saving mode – Pump switches off 10 minutes after last cycle or at low battery Battery safety function – Pump switch off by low battery, controlled by electronic system Automatic cut off when no load after working cycle (i.e. punching tools in order to protect dies and save energy) o Solid plastic housing – (control buttons, coupling devices and display are well prodected) 60 Volt Li-Ion Battery 6,3 Ah– The capacity of the battery is sufficient for one working day of electric installation work.DC-Disk engine max. 2500 WCable remote control optional: wireless remote control optional: foot switch Pressure control at the LED display (integratet pressure sensor) Shipment: - Battery hydraulic pump with integral batter - Charger - Cable remote control

For use with internally fitted battery or mains operation 230V/50Hz up to 850bar Automatic recognition of pressure demand with cut off function when required pressure is reached (20-850 bar). Useable for all tools with an oil demand up to 900 ml Maximum output oil pressure can be preset by software to suit customers requirements, e.g. 700bar Energy saving mode – Pump switches off 10 minutes after last cycle or at low battery Battery safety function – Pump switch off by low battery, controlled by electronic system Automatic cut off when no load after working cycle (i.e. punching tools in order to protect dies and save energy) o Solid plastic housing – (control buttons, coupling devices and display are well prodected) 66 Volt Li-Ion Battery – The capacity of the battery is sufficient for one working day of electric installation work, standard 4,2 Ah optional: 6,3 Ah DC-Disk engine max. 1000 W optional: max. 2500 W Cable remote control optional: wireless remote control optional: foot switch Pressure control at the LED display (integratet pressure sensor) Shipment: - Battery hydraulic pump with integral batter - Charger - Cable remote control

For use with internally fitted battery or mains operation 230V/50Hz up to 850bar Automatic recognition of pressure demand with cut off function when required pressure is reached (20-850 bar). Useable for all tools with an oil demand up to 1,8 literMaximum output oil pressure can be preset by software to suit customers requirements, e.g. 700bar Energy saving mode – Pump switches off 10 minutes after last cycle or at low battery Battery safety function – Pump switch off by low battery, controlled by electronic system Automatic cut off when no load after working cycle (i.e. punching tools in order to protect dies and save energy) Solid plastic housing – (control buttons, coupling devices and display are well prodected) 66 Volt Li-Ion Battery 6,3 Ah – The capacity of the battery is sufficient for one working day of electric installation work,DC-Disk engine max. 2500 W Cable remote control optional: wireless remote control optional: foot switch Pressure control at the LED display (integratet pressure sensor) Shipment: - Battery hydraulic pump with integral battery- Charger - Cable remote control

This unit is used to operate single-acting tools and cylindersFor use with internally fitted battery or mains operation 230V/50Hz up to 850bar Automatic recognition of pressure demand with cut off function when required pressure is reached (20-850 bar). Useable for all tools with an oil demand up to 900 ml Maximum output oil pressure can be preset by software to suit customers requirements, e.g. 700bar Energy saving mode – Pump switches off 10 minutes after last cycle or at low battery Battery safety function – Pump switch off by low battery, controlled by electronic system Automatic cut off when no load after working cycle (i.e. punching tools in order to protect dies and save energy) Solid plastic housing – (control buttons, coupling devices and display are well prodected) 66 Volt Li-Ion Battery 6,3 Ah – The capacity of the battery is sufficient for one working day of electric installation work,DC-Disk engine, max. 1000 W Cable remote control optional: wireless remote control optional: foot switch Pressure control at the LED display (integratet pressure sensor) Shipment: - Battery hydraulic pump with integral battery- Charger - Cable remote control

Hydraulic power pack for the operation of hydraulic devices such as winches or double-acting cylinders that have to be controlled remotely. The machine is equipped with modern wireless remote control electronics that control the hydraulic functions via a portable console.For hydraulic motors the functions of clockwise/stop/anti-clockwise rotation with speed control up to a distance of 80 meters from the control unit.For hydraulic cylindersthe functions press/hold/retract with speed control up to a distance of 80 meters from the power pack.In the event of a failure of the electronic remote control, the power pack allows normal use with manual control only hydraulic, can therefore be used with the same functions regardless of remote control, the pressure gauge indicates the load value allowing an accurate adjustment of the movements. The weight and the dimensions contained at the maximum guarantee excellent portability and mobility both on board the vehicles and on the ground. ASPID GETZ has an accurate build quality, is manufactured with the best materials and components to guarantee a long and trouble-free service.Technical specifications: Oil delivery rate: 12 L / min at max. 140 bar Engine: 6 HP Briggs & Stratton, gasoline Start: pull-wire and electric starter Speed ​​control, manual Oil tank: 7 liters Flat-Face quick connector 3/8 " Radio remote control, range 80 meters Dimensions: 700x500x570mm Weight: 62 kg

Hydraulic power pack for the operation of hydraulic devices such as winches or double-acting cylinders that have to be controlled remotely. The machine is equipped with modern wireless remote control electronics that control the hydraulic functions via a portable console.For hydraulic motors the functions of clockwise/stop/anti-clockwise rotation with speed control up to a distance of 80 meters from the control unit.For hydraulic cylindersthe functions press/hold/retract with speed control up to a distance of 80 meters from the power pack.In the event of a failure of the electronic remote control, the power pack allows normal use with manual control only hydraulic, can therefore be used with the same functions regardless of remote control, the pressure gauge indicates the load value allowing an accurate adjustment of the movements. The weight and the dimensions contained at the maximum guarantee excellent portability and mobility both on board the vehicles and on the ground. ASPID GETZ has an accurate build quality, is manufactured with the best materials and components to guarantee a long and trouble-free service.Technical specifications: Oil delivery rate: 12 L / min at max. 140 bar Engine: 6 HP Briggs & Stratton, gasoline Start: pull-wire and electric starter Speed ​​control, manual Oil tank: 7 liters Flat-Face quick connector 3/8 " Radio remote control, range 80 meters Dimensions: 700x500x570mm Weight: 62 kg

Hydraulic units with 21 HP Diesel engine with electric starter Delivery rate: 40 L/min. at 140 bar Control valve on the pump Including oil tank, fuel tank, oil cooling (air-oil), oil filter Stable protective frame with rollers and handles facilitate transport This pump can be used up to an operating pressure of 210 BAR Connection for one device, FlatFace couplings (P + T)

Hydraulic power packs with 35 HP VANGARD petrol engine with electric starter Delivery rate: Single circle: 60-80 L / min. at 0-175 bar Dual circuit: 2x30 to 2x40 L / min at 0-175 bar The working pressure is adjustable, the delivery rate can be regulated via the engine speed. Control valve on the pump Including oil tank, fuel tank, oil cooling (air-oil), oil filter Stable protective frame with rollers and handles facilitate transport This pump can be used up to an operating pressure of 210 BAR Connection for two devices, FlatFace couplings (P + T)

Hydraulic power packs with 35 HP VANGARD petrol engine with electric starter Delivery rate: Single circle: 60-80 L / min. at 0-175 bar Dual circuit: 2x30 to 2x40 L / min at 0-175 bar The working pressure is adjustable, the delivery rate can be regulated via the engine speed. Control valve on the pump Including oil tank, fuel tank, oil cooling (air-oil), oil filter Stable protective frame with rollers and handles facilitate transport This pump can be used up to an operating pressure of 210 BAR Connection for two devices, FlatFace couplings (P + T)

Hydraulic power packs with 21 hp B & S petrol engine with recoil starter and electric starter Delivery rate: 50 L/min. at 140 bar, 34 L/min. at max. 210 bar Control valve on the pump Incl. Oil tank, fuel tank, oil cooling (air oil), oil filter, recoil starter Stable protective frame Optional on request: castors and handles This pump can be used up to an operating pressure of 210 BAR Connection for one device, FlatFace couplings (P + T)

Hydraulic power units with 25 hp KUBOTA diesel engine with electric starter Delivery rate: 50 L/min. at 140 bar Control valve on the pump Incl. Oil tank, fuel tank, oil cooling (air oil), oil filter Stable protective frame This pump can be used up to an operating pressure of 210 BAR Connection for one device, FlatFace couplings (P + T)

Hydraulic power units with 10.5 hp YANMAR diesel engine with recoil starter and electric starter Delivery rate: 26 L/min. at 140 barControl valve on the pump Incl. Oil tank, fuel tank, oil cooling (air oil), oil filter Sturdy protective frame with wheels and handles facilitate transport This pump can be used up to an operating pressure of 210 BAR Connection for one device, FlatFace couplings (P + T)

Hydraulic power packs with 6 hp B & S petrol engine with recoil starterDelivery rate: 20 L/min. at 95 bar, 12 L/min. at max. 160 bar Control valve on the pump Incl. Oil tank, fuel tank, oil cooling (air oil), oil filter, recoil starter Stable protective frame Castors and handles This pump can be used up to an operating pressure of 160 BAR Connection for one device, FlatFace couplings (P + T)SCORPION micro power pack with 6 Hp gasoline engine – recoil start is designed to guarantee the minimum weight and easy transportability. The machine is available in two configurations of hydraulic power: 20 L/min @ 95 Bar or 12 L/min @ 160 Bar. Agile and robust SCORPION is ideal in the utilities maintenance, in general applications with hydraulic tools and in all works where are needed power and transportability. Available with different hydraulic power depending on request.

Hydraulic power packs with 6 hp B & S petrol engine with recoil starterDelivery rate: 20 L/min. at 95 bar, 12 L/min. at max. 160 bar Control valve on the pump Incl. Oil tank, fuel tank, oil cooling (air oil), oil filter, recoil starter Stable protective frame Castors and handles This pump can be used up to an operating pressure of 160 BAR Connection for one device, FlatFace couplings (P + T)SCORPION micro power pack with 6 Hp gasoline engine – recoil start is designed to guarantee the minimum weight and easy transportability. The machine is available in two configurations of hydraulic power: 20 L/min @ 95 Bar or 12 L/min @ 160 Bar. Agile and robust SCORPION is ideal in the utilities maintenance, in general applications with hydraulic tools and in all works where are needed power and transportability. Available with different hydraulic power depending on request.

Hydraulic power packs with 11 kW three-phase motor, IP55 Delivery rate: 20/30/40 L / min. at max. 210 bar (switchable flow rate) Control valve on the pump Incl. Oil tank, oil cooling (air oil), oil filter Sturdy protective frame with wheels and handles make transport easier This pump can be used up to an operating pressure of 210 BAR Connection for one device, FlatFace couplings (P + T)

Hydraulic power packs with 11 kW three-phase motor, IP55 Delivery rate: 41 L / min. at 140 bar, 28 L / min. at max. 210 bar Control valve on the pump Incl. Oil tank, oil cooling (air oil), oil filter Sturdy protective frame with wheels and handles make transport easier This pump can be used up to an operating pressure of 210 BAR Connection for one device, FlatFace couplings (P + T)

Hydraulic power packs with 18 hp B & S petrol engine with recoil starter and electric starter Delivery rate: 38 L / min. at 140 bar, 25 L / min. at max. 250 bar Control valve on the pump Incl. 28 liter oil tank, fuel tank, oil cooling (air oil), oil filter Sturdy protective frame with wheels and handles facilitate transport This pump can be used up to an operating pressure of 250 bar Connection for two devices, FlatFace couplings (P + T)

230 volt electrohydraulic pump 2000 watt 1-phase motor for high torque, starting under pressure is possible High capacity of max. 2 L / min. at max. 700 BAR Two solenoid valves Cable remote control Connection for wired remote control or direct connection of tools with electrical operation Function: Extend - Hold position under pressure - Retract 23 liters hydraulic tank

230 volt electrohydraulic pump 2000 watt 1-phase motor for high torque, starting under pressure is possible High capacity of max. 2 L / min. at max. 700 BAR Two solenoid valves With IntercoolerCable remote control Connection for wired remote control or direct connection of tools with electrical operation Function: Extend - Hold position under pressure - Retract 23 liters hydraulic tank

230 volt electrohydraulic pump 2000 watt 1-phase motor for high torque, starting under pressure is possible High capacity of max. 2 L / min. at max. 700 BAR Mechanical hand valveWith oil cooler (intercooler)For using with tools with own control valve or  controling at the pumpFunction: Extend - Hold position under pressure - Retract 23 liters hydraulic tank

400 volt electrohydraulic pump 4000 watt 3-phase motor for high torque, starting under pressure is possible High capacity of max. 4 L / min. at max. 700 BAR Two solenoid valves Cable remote control Connection for wired remote control or direct connection of tools with electrical operation Function: Extend - Hold position under pressure - Retract 23 liters hydraulic tank

400 volt electrohydraulic pump 4000 watt 3-phase motor for high torque, starting under pressure is possible High capacity of max. 4 L / min. at max. 700 BAR Two solenoid valves With IntercoolerCable remote control Connection for wired remote control or direct connection of tools with electrical operation Function: Extend - Hold position under pressure - Retract 23 liters hydraulic tank

400 volt electrohydraulic pump 4000 watt 3-phase motor for high torque, starting under pressure is possible High capacity of max. 7,5 L / min. at max. 700 BAR Two solenoid valves With IntercoolerCable remote control Connection for wired remote control or direct connection of tools with electrical operation Function: Extend - Hold position under pressure - Retract 90 liters hydraulic tank