Go to the homepage
€0.00

Demolition and sorting grabs

Our demolition and sorting grabs are ideal for demolishing brick and timber buildings. Enquire about ordering now!

Filter products

–
Felling grapple
KAF-GC
Felling grapple
KAF-GC
KAF-GC
Felling grapple for timber harvesting and tree work along the roadMaximum efficiency for maintenance and felling work Felling grapples significantly shorten working times and reduce labour costs. Whether thinning, energy wood extraction, landscape management, hazard tree felling, clearance profile cutting or maintenance of roadside greenery - work is carried out quickly, precisely and economically. This means short closure times, lower costs and smooth processes in the road maintenance service. Maximum safety in the traffic area Simultaneous gripping, cutting and controlled depositing minimises uncontrolled falling movements and increases safety for personnel, road users and infrastructure. Robust for daily use Flexibly attachable to various excavator classes, felling grapples are ideal for forestry operations, landscaping, municipal building yards and road maintenance depots. Your advantages at a glance Safe gripping, cutting and depositing in a single operation Significantly reduced risk to road traffic Quick implementation with low manpower requirements Easy removal of damaged or diseased trees, bushes and branches. The optional central collection clamp allows multiple cuts to be made to optimise the work cycle. Interchangeable blade for low maintenance. Short blocking times and high efficiency Robust technology for continuous municipal use Felling grapple - the safe and efficient solution for professional tree work along our roads.
details
Premium
HG-PLUS-25.38 - Demolition and sorting grapple with rotation 1,900 kg for excavators from 25-38 tonnes
KPM-HG+25.38
HG-PLUS-25.38 - Demolition and sorting grapple with rotation 1,900 kg for excavators from 25-38 tonnes
KPM-HG+25.38
KPM-HG+25.38
(25) Weight - Gripper: 1900-2199 kg
HG-PLUS series demolition grabs, heavy-duty seriesSpecificationsWeight: 1,900 kgExcavator weight: 25-38 tonnesHydraulics: Grapple: Flow rate: 180 l/min at 350 barRotation: Flow rate: 35 l/min at 190 - 210 barForce: 80 kN Height (A): 1,650 mmMouth depth (B): 545 mmOpening width (C): 2,200 mm Cutting width (D): 1,200 mm Capacity: 900 litresDescriptionReplaceable and reversible cutting blade Large bowl opening and high loading capacity360° rotation Low wear due to recessed blade bolts and nuts (inside and outside)Cylinder with end support, no mechanical blocks required on the jaws Protection valve against high pressure peaks and overflow Safety non-return valve to maintain gripping forceCompactness: one of the lowest profiles on the marketEfficiency and power: two hydraulic motors and two drive wheels for better force and torque distributionStrength: shells made entirely of HARDOX
details
PO series - clamshell buckets with half shells with rotation from 165-1000 kg for excavators from 1-23 tonnes
KPM-PO-Reihe
PO series - clamshell buckets with half shells with rotation from 165-1000 kg for excavators from 1-23 tonnes
KPM-PO-Reihe
KPM-PO-Reihe
PO series orange peel grabLarge shell opening and high loading capacity360° rotation The half shells are particularly suitable for demolition work and for grabbing scrap metal and loose material.Robustness and durability: made of high-strength and wear-resistant structural materialsDurability: robust frame; hardened bushings and heat-treated pinsSafety: each valve has a special and protected cylinderEase of maintenanceReinforced design for excavators from 14 to 23 tonnesSpecificationsWeight: Excavator weight:Hydraulic grapple: Hydraulic rotation: Power Capacity: Height (A): Opening width (C):
details
PV-series - Attachable orange peel grab with half shells with rotation from 1200-2080 kg for excavators from 18-38 tonnes
KPM-PV-Reihe
PV-series - Attachable orange peel grab with half shells with rotation from 1200-2080 kg for excavators from 18-38 tonnes
KPM-PV-Reihe
KPM-PV-Reihe
PV range orange peel grabsHigh-performance orange peel grabs for intensive handling: old scrap, solid waste, organic residuesLarge shell opening and high loading capacity360° rotation (continuous rotation)The half shells are particularly suitable for grabbing scrap metal and loose material.Protection: Hydraulic braking when opening the cylinder; handle fully coveredRobustness and resistance: Robust and elastic structure with mechanical limit switches for opening and closingEase of maintenanceSpecificationsWeight:Excavator weight:Hydraulic grapple: Hydraulic rotation:PowerCapacity:Height (A):Opening width (C):
details
SG series - Demolition and sorting grabs from 115 to 780 kg for excavators from 1 to 16 tonnes
PM-SG-Reihe
SG series - Demolition and sorting grabs from 115 to 780 kg for excavators from 1 to 16 tonnes
PM-SG-Reihe
PM-SG-Reihe
SG series demolition grabs, light series from 115 - 780 kg for excavators from 1 - 16 tonnesLoad holding valve as standard (SG 3.4 - SG10.16)Interchangeable and reversible wear blades (SG2.3 - SG10.16) Large openings and high capacity High closing force Compact design, low weight and short overall height Continuous 360° hydraulic rotation Easily accessible grease nipplesProtection valve against high pressure peaks and excessive flow rate
details
SGF series - mounted demolition and sorting grabs without rotation
PM-SGF-Reihe
SGF series - mounted demolition and sorting grabs without rotation
PM-SGF-Reihe
PM-SGF-Reihe
SGF series demolition grabs without rotation, light series, from 55-750 kg for excavators from 0.7-20 tonnes Load holding valve as standard (SGF 3.4 - SGF10.16)Interchangeable and reversible wear blades (SGF2.3 - SGF10.16) Large openings and high capacity High closing force Compact design, low weight and short overall height Easily accessible grease nipplesProtection valve against high pressure peaks and excessive flow rateThe dataWeight: 55-740 kgExcavator weight: 0.7-20 tonnesHydraulics: 15-30 l/min at 200 bar to 60-70 l/min at 300 barPower: 8-43 tonnesHeight without rotation (A): 410-950 mmMouth depth (B): 220-585 mmOpening width (C): 750-1950 mmGripper width (D): 300-1000 mmCapacity: 23-650 litres
details

Demolition and sorting grabs - precise tools for heavy-duty tasks

Demolition and sorting grabs are among the most important tools in the construction and demolition sector. They enable the targeted gripping, lifting, sorting and positioning of demolition material, building materials, metals or recycling material - even under difficult conditions. The hydraulically operated grabs from KW Hydraulik are designed for maximum load capacity and control precision and are available in various versions for excavators from 1 to over 60 tonnes.

Robust, flexible and ready for use - technology in detail

Our demolition and sorting grabs are manufactured with high-strength steel components and are equipped with:

  • Rotating motors for 360° endless rotation

  • Reinforced grab arms with replaceable wear strips

  • Centred bearings for optimum force distribution

  • Low-maintenance hydraulic cylinders with pressure relief valves

  • Closed design for reliable operation in dusty or muddy environments

Opening widths, gripping forces and sizes vary depending on the model - we will be happy to advise you on selecting the right system for your carrier machine and application.

Versatile areas of application

Demolition and sorting grabs are used in a wide range of industries:

  • Demolition work & building dismantling

  • Material handling in recycling plants

  • Sorting and reloading mixed waste, metal and wood fractions

  • Gripping and positioning natural stone, roots or bulk material

  • Loading construction waste for container logistics or demolition work

Thanks to the precise control via the excavator's hydraulics, even delicate tasks can be carried out safely - such as separating rubble or removing specific components in selective demolition.

Why grabs from KW Hydraulik?

Our grabs are designed for a long service life and maximum productivity. They impress with:

  • Compact design with high gripping force

  • Low wear due to precisely guided bearings

  • Quick availability of spare parts and serviceability

  • Compatibility with all common quick-change systems

We also supply you with

  • Hydraulic power packs for independent power supply

  • Hydraulic hoses & couplings in every design

  • Control blocks & valve technology for fine control of opening and rotation

All components are tested by us in accordance with the certified ISO 9001:2015 quality standard - for safe use under real construction site conditions.

Discover now: High-performance grabs for excavators - reliable in demolition, efficient in sorting.


Demolition and sorting grabs are designed for the demolition of buildings made of bricks, wood and other building materials and the subsequent separation of the demolition material to facilitate recycling. They are also widely used for sorting and handling waste. The grapple is therefore mainly used in the demolition, environmental and recycling sectors.


Cookie-Consent
We use cookies to customize the content and ads on our website. In addition, cookies allow us to provide social media features and analyze access to our website.