STANLEY

Rotatable cutting head, guillotine 18 volt lithium-ion battery from DEWALT Cutting force 55 kN integrated LED light to illuminate the work area Very robust plastic housing, impact-resistant Very stable transport case

Rotatable cutting head, guillotine 18 volt lithium-ion battery from DEWALT Cutting force 55 kN integrated LED light to illuminate the work area Very robust plastic housing, impact-resistant Very stable transport case

Rotatable cutting head, guillotine 18 volt lithium-ion battery from DEWALT Cutting force 88 kN, cutting knife point for steel armored cables integrated LED light to illuminate the work area Very robust plastic housing, impact-resistant Two-stage hydraulics enable rapid feed for approaching the cable Very stable transport case

Rotatable cutting head, guillotine 18 volt lithium-ion battery from DEWALT Cutting force 55 kN, cutting blade point for steel armored cables integrated LED light to illuminate the work area Very robust plastic housing, impact-resistant Two-stage hydraulics enable rapid feed for approaching the cable Very stable transport case

Rotatable cutting head, guillotine 18 volt lithium-ion battery from DEWALT Cutting force 43 kN Integrated LED light for illuminating the work area Very robust plastic housing, impact-resistant Two-stage hydraulics allows fast feed to start the cable Very stable transport case

Rotating cutting head, open scissors18 volt lithium-ion battery from DEWALTCutting force 130 kN at the piston, 60 kN between the cutting edges Integrated LED light to illuminate the work areaVery robust plastic housing, impact-resistantTwo-stage hydraulics enable rapid feed to start the cable Very sturdy transport case

Rotatable cutting head, guillotine With finger protection, pinching the fingers during withdrawal is excluded 18 volt lithium-ion battery from DEWALT Cutting force 55 kN, cutting knife sharpening for steel-armored cables Integrated LED light for illuminating the work area Special detent lever construction allows the cutting head to be opened in any position. This allows loosening with clamped knives! Very robust plastic housing, impact-resistant Two-stage hydraulics allows fast feed to start the cable Very stable transport case

Maximum performance for tight working areas The BEKM25020 cordless hydraulic cable crimper from our ECO-LINE combines powerful 250 kN crimping performance with an ergonomic gun design. The powerful and rotatable crimping head enables precise and safe crimping. Thanks to its compatibility with PFISTERER size III, KLAUKE series 25 and DUBUIS inserts, copper cable lugs up to 630 mm² and aluminium up to 500 mm² can be processed efficiently. The impact-resistant housing with two-component handle ensures maximum ease of use and durability. The automatic pressure cut-off guarantees a consistently high quality of the crimping point. Powered by a powerful 18V lithium-ion battery from MAKITA, the BEK25020 is supplied in an extremely hard-wearing case - including battery and charger, scope of delivery without crimping dies.Pressing tool for "D60" series press inserts, compatible with "PFISTERER size III", "KLAUKE series 25", "DUBUIS 250" series inserts Gun shape Rotatable, closed press head Pressing force 250 kN, enables pressing of: max. 625/630 mm² copper cable lugs to DIN 46235 max. 500 mm² aluminium 18 volt lithium-ion battery and charger from MAKITA Impact-resistant housing with two-component handle for perfect handling Supplied in an extremely hard-wearing case Automatic switch-off after reaching the maximum pressure (pressure relief valve) Scope of delivery: Cordless hydraulic cable press, incl. one battery, charger and case without inserts

Maximum performance for confined working areas The BEKM6022 cordless hydraulic cable crimping press from our ECO-LINE combines powerful 60 kN crimping performance with an ergonomic bar design that has been specially developed for confined spaces such as control cabinet construction. The compact, rotatable and closed crimping head with hinged lock enables precise and safe crimping even in hard-to-reach areas.Thanks to its compatibility with KLAUKE series 22 and DUBUIS inserts, copper cable lugs up to 300 mm² and aluminium up to 300 mm² can be processed efficiently. The impact-resistant housing with two-component handle ensures maximum ease of use and durability. The automatic pressure cut-off guarantees a consistently high quality of the crimping point.Powered by a powerful 18V lithium-ion battery from MAKITA, the BEK6022 is supplied in an extremely hard-wearing case - including battery and charger, scope of delivery without crimping dies.For crimping dies series "60-CK", compatible with the dies of the series "KLAUKE Series 22", "DUBUIS D62"Rod shape, allows use in tight spaces such as in switch gear cabinetsCompact, rotatable, closed press head with snap closure, so that it can be pressed even in confined areasPressing force 62 kN, allows pressing of: Max. 300 mm² copper cable lugs according to DIN 46235 Max. 240 mm² aluminum 18 volt lithium-ion battery and charger from MAKITAImpact-resistant housing with two-component handle for perfect handling Delivery in extremely durable case Automatic switch-off after reaching the maximum pressure (pressure relief valve) Delivery:Cordless hydraulic cable press, including a rechargeable battery, charger and case without inserts

Rotating cutting head, guillotine 18 volt lithium-ion battery from MAKITA Cutting force 120 kN, cutting blade sharpening for steel-reinforced cables Integrated LED light to illuminate the work area Very robust plastic housing, impact-resistant Two-stage hydraulics enable fast feed for starting the cable Very sturdy transport case

Rotating cutting head, guillotine 18 volt lithium-ion battery from MAKITA Cutting force 120 kN, cutting blade sharpening for steel-reinforced cables Integrated LED light to illuminate the work area Very robust plastic housing, impact-resistant Two-stage hydraulics enable fast feed for starting the cable Very sturdy transport case

For crimping dies series "35", compatible with KLAUKE series "4", DUBUIS "D35"Pistol-shaped, especially light versionCompact, rotatable, closed press head with snap closure, even in confined areas to be able to press Pressing force 35 kN, allows pressing of: Max. 120 mm² copper cable lugs according to DIN 46235  Max. 150 mm² aluminum   18 volt lithium-ion battery and charger from DEWALT Impact-resistant housingDelivery in extremely durable case Automatic switch-off after reaching the maximum pressure (pressure relief valve)Delivery: Cordless hydraulic cable press, including a rechargeable battery, charger and case without inserts

For crimping dies series "60-H" and "50", compatible with KLAUKE series "5", DUBUIS "D51", BEKU 30x30x12Pistol-shaped, especially light versionCompact, rotatable, closed press head with snap closure, even in confined areas to be able to press Pressing force 55 kN, allows pressing of: Max. 185 mm² copper cable lugs according to DIN 46235  Max. 185 mm² aluminum    18 volt lithium-ion battery and charger from DEWALT Impact-resistant housing Delivery in extremely durable case Automatic switch-off after reaching the maximum pressure (pressure relief valve) Delivery: Cordless hydraulic cable press, including a rechargeable battery, charger and case without inserts

For crimping dies series "60-CK", compatible with KLAUKE series "22", DUBUIS "D62"Pistol-shaped, especially light version Compact, rotatable, closed press head with snap closure, so that it can be pressed even in confined areasPressing force 62 kN, allows pressing of: Max. 300 mm² copper cable lugs according to DIN 46235  Max. 240 mm² aluminum     18 volt lithium-ion battery and charger from DEWALT Impact-resistant housing Delivery in extremely durable case Automatic switch-off after reaching the maximum pressure (pressure relief valve) Delivery: Cordless hydraulic cable press, including a rechargeable battery, charger and case without inserts

For crimping dies series "130-C", compatible with KLAUKE series "13", DUBUIS "C130"Pistol-shaped, especially light version Lightest 130 kN cordless tool, allows 14mm wide pressingCompact, rotatable, closed press head with snap closure, even in confined areas to be able to press Pressing force 130 kN, allows pressing of: Max. 300 mm² copper cable lugs according to DIN 46235  Max. 300 mm² aluminum      18 volt lithium-ion battery and charger from DEWALT Impact-resistant housing Delivery in extremely durable case Automatic switch-off after reaching the maximum pressure (pressure relief valve) Delivery: Cordless hydraulic cable press, including a rechargeable battery, charger and case without inserts

For crimping dies series "35", compatible with KLAUKE series "4", DUBUIS "D35"Rod shape, allows use in tight spaces such as in switch gear cabinets Compact, rotatable, closed press head with snap closure, even in confined areas to be able to press Pressing force 35 kN, allows pressing of: Max. 120 mm² copper cable lugs according to DIN 46235  Max. 150 mm² aluminum  18 volt lithium-ion battery and charger from DEWALT Impact-resistant housing with two-component handle for perfect handling Delivery in extremely durable case Automatic switch-off after reaching the maximum pressure (pressure relief valve) USB interface for data readout Delivery: Cordless hydraulic cable press, including a rechargeable battery, charger and case without inserts

For crimping dies series "60-H" and "50", compatible with KLAUKE series "5", DUBUIS "D51", BEKU 30x30x12Rod shape, allows use in tight spaces such as in switch gear cabinets Compact, rotatable, closed press head with snap closure, even in confined areas to be able to press Pressing force 55 kN, allows pressing of: Max. 185 mm² copper cable lugs according to DIN 46235  Max. 185 mm² aluminum   18 volt lithium-ion battery and charger from DEWALT Impact-resistant housing with two-component handle for perfect handling Delivery in extremely durable case Automatic switch-off after reaching the maximum pressure (pressure relief valve) USB interface for data readout Delivery: Cordless hydraulic cable press, including a rechargeable battery, charger and case without inserts

For crimping dies series 60-D", compatible with the dies of the series "KLAUKE Series 18", "DUBUIS D61", "CEMBRE HT50"Rod shape, allows use in tight spaces such as in switch gear cabinets Compact, rotatable, open press head, opening jaw 13 mm Pressing force 62 kN, allows pressing of: Max. 185 mm² copper cable lugs according to DIN 46235  Max. 185 mm² aluminum    18 volt lithium-ion battery and charger from DEWALTImpact-resistant housing Delivery in extremely durable case Automatic switch-off after reaching the maximum pressure (pressure relief valve) Delivery: Cordless hydraulic cable press, including a rechargeable battery, charger and case without inserts

For crimping dies series "60-CK", compatible with the dies of the series "KLAUKE Series 22", "DUBUIS D62"Rod shape, allows use in tight spaces such as in switch gear cabinetsCompact, rotatable, closed press head with snap closure, so that it can be pressed even in confined areasPressing force 62 kN, allows pressing of: Max. 300 mm² copper cable lugs according to DIN 46235 Max. 240 mm² aluminum 18 volt lithium-ion battery and charger from DEWALT Impact-resistant housing with two-component handle for perfect handling Delivery in extremely durable case Automatic switch-off after reaching the maximum pressure (pressure relief valve) USB interface for data readout Delivery: Cordless hydraulic cable press, including a rechargeable battery, charger and case without inserts

Pistol shape, heavy duty with fast feed (two-stage hydraulics) Compact, rotatable, closed pressing head Pressing force 50 kN, allows pressing of: Max. 300 mm² copper cable lugs according to VDE 18 volt lithium-ion battery and charger from DEWALT Impact-resistant housing with two-component handle for perfect handling Delivery in extremely durable case Automatic switch-off after reaching the maximum pressure (pressure relief valve) USB interface for data readout Delivery: Cordless hydraulic cable press, including a rechargeable battery, charger and case

For crimping dies series "60-CK", compatible with the dies of the series "KLAUKE Series 22", "DUBUIS D62"Pistol-shaped, heavy version with fast feed (two-stage hydraulics)Compact, rotatable, closed press head with snap closure, so that it can be pressed even in confined areas Pressing force 62 kN, allows pressing of: Max. 300 mm² copper cable lugs according to DIN 46235  Max. 240 mm² aluminum  18 volt lithium-ion battery and charger from DEWALT Impact-resistant housing with two-component handle for perfect handling Delivery in extremely durable case Automatic switch-off after reaching the maximum pressure (pressure relief valve) USB interface for data readout Delivery: Cordless hydraulic cable press, including a rechargeable battery, charger and case without inserts

Pistol shape, heavy-duty design with fast feed (two-stage hydraulics) Robust and durable quick-release coupling for holding the various tool inserts. DEWALT 18 volt / 5 Ah lithium-ion battery and XR series chargers are included. Batteries up to 18 Volt / 12 Ah are available as an option. The inserts can be rotated in the holder. Impact-resistant housing with two-component handle for perfect handling Supplied in an extremely hard-wearing case Automatic switch-off after reaching the maximum pressure (pressure relief valve) USB interface for data readout Force: 62 kN Stroke: 38 mm Dimensions: 295x86x335 mm Weight: 3.95 kgDelivery: Cordless hydraulic MULTITOOL, including a rechargeable battery, chargerWITHOUT interchangeable toolsavailable tool inserts: XPM-062 compact, closed crimping head with hinged closure for crimping in tight spaces. For "60-CK" series press inserts, compatible with the "KLAUKE Series 22", "DUBUIS D62" series inserts Crimping force 62 kN, enables crimping of: max. 300 mm² copper cable lugs to DIN 46235 max. 300 mm² aluminum XCM-050 - open cutting head Ø50mm for CU and AL cables XGM-025 - closed cutting head Ø25mm for aluminum-steel cables (ACSR) - overhead line XHM-062 - Punch for perforators with 3/4 "UNF mounting thread, compatible with sheet metal punches of the brands GREENLEE, ALFRA, ... max. Ø96mm in sheet steel 2mm XCMDIN - Profile rail cutting insert for DIN mounting rails TS15x35mm, TS7.5x35mm, TS5x15mm G-rail CU 3x10mm, CU 3x25mm Slotted hole insert M6 XCMSTRU - Profile rail cutting insert for STRUT support rails 41x41mm and 41x21mmXCM008 - Bolt cutter up to Ø8mmCutting head available in three different versions: curved, straight, flush cuttingIdeal for cutting fasteners such as lag screws, screws, L-shaped hooks and nails.XPM061 - compact, open crimping head for crimping in tight spaces.For press inserts series "60-D" DIN 48083-6M, compatible with inserts from the "KLAUKE series 18", "DUBUIS D61" seriesCrimping force 62 kN, enables crimping of: max. 185 mm² copper cable lugs to DIN 46235 max. 185 mm² aluminum XPM060F - closed four-pin crimping head, does not require interchangeable crimping inserts.Crimping force: 62 kN max. 400 mm² copper commercially available standard cable lugs max. 300 mm² aluminum commercially available standard cable lugsXPM130D - compact, closed crimping head with hinged closure.For "130-C" series crimping inserts, compatible with "KLAUKE Series 13", "DUBUIS C130" series insertsCrimping force 130 kN, enables crimping of: max. 300 mm² copper cable lugs to DIN 46235 max. 300 mm² aluminum XDM041 - Contact wire straightener for contact wires from 107-150 mm² Eliminates kinks in the contact wire Force: 40 kN XCMNUT - Nut splitter M8 to M12 Force: 43 kN XGMTRC - Threaded rod cutter M6 to M12 Force: 60 kN XGMCAT - Contact wire cutter for 102, 120 and 150 mm² Stroke: 27 mm Force: 60 kN XCMTRAY - Mesh cable duct cutter up to Ø6mm for cutting the grid bars

Pistol-shaped, heavy-duty version with quick feed (two-stage hydraulics) Robust and durable quick coupling for holding various tool inserts. DEWALT 18 Volt / 5 Ah lithium-ion battery and chargers, Series XR, are included. Batteries up to 18 volts / 12 Ah are optional. The inserts can be rotated in the holder. Impact-resistant housing with two-component handle for perfect handling XCM025 - Cutting head Ø25mm for ACSR lines Folding head with precise knife guidance, cutting force: 62 kN Delivered in an extremely durable case Automatic switch-off after reaching the maximum pressure (pressure relief valve) USB interface for data reading Force: 62 kN Scope of delivery: - Cordless-hydraulic combination tool, - including a battery, charger and case, - XPM-062 compact, closed press head with folding lock for pressing even in narrow areas.     For press inserts series "60-CK", compatible with the inserts of the series "KLAUKE Series 22",     "DUBUIS D62". Pressing force 62 kN, enables pressing of:       max. 300 mm² copper cable lugs according to DIN 46235,       max. 300 mm² aluminum XGM-025- closed cutting head Ø25mm for aluminum-steel ropes (ACSR) - overhead lines

For crimping dies series "130-C", compatible with the dies of the series "KLAUKE Series 13", "DUBUIS C130", "CEMBRE C"Pistol-shaped, heavy version with fast feed (two-stage hydraulics) Rotatable, open press head with, opening jaw 32 mm Pressing force 130 kN, allows pressing of: Max. 400 mm² copper cable lugs    Max. 300 mm² aluminum        18 volt lithium-ion battery and charger from DEWALT Impact-resistant housing with two-component handle for perfect handling Delivery in extremely durable case Automatic switch-off after reaching the maximum pressure (pressure relief valve) Delivery: Cordless hydraulic cable press, including a rechargeable battery, charger and case without inserts