Trennsägen
Filter
–
HCS14 - hydraulically driven cut-off machine, Ø 350 mm
The HYCON PREMIUM Cut-off Saw cuts all types of concrete, steel, brick wall, asphalt etc. The HYCON Cut-off saw is a very sturdy tool intended for cutting even under the most extreme conditions. It is completely unaffected by water and dust, and all parts run in oil. The HYCON PREMIUM-saws are build for hard use day after day - without breakdowns. The fact, that the saw is always working and does not require service means higher profits than with e.g. a petrol saw. The saw stops automatically if the blade jams because of the system pressure relief valve. The blade stops rotating maximum 10 sec. after releasing the trigger. Assuring no injury to the operator. The hydraulic cut-off saw from HYCON can be used for horizontal and vertical cutting. Hydraulic direct drive high quality motor assume a minimum of service. Flushing water runs through body and hydraulic motor for extra cooling and to keep all surfaces cold.Saw blade diameter: 350 mm Hydraulics: 20-30 L / min at 120 bar max. 172 bar Cutting depth: 137 mm Peripheral speed of the saw blade: 71 m / s Weight: 7.4 kgDelivery without disc (please order separately)
HCS16 - Hydraulically powered cut-off machine, Ø 400 mm
The HYCON Cut-off Saw PREMIUM cuts all types of concrete, steel, brick wall, asphalt etc. The HYCON Cut-off saw is a very sturdy tool intended for cutting even under the most extreme conditions. It is completely unaffected by water and dust, and all parts run in oil. The HYCON PREMIUM-saws are build for hard use day after day - without breakdowns. The fact, that the saw is always working and does not require service means higher profits than with e.g. a petrol saw. The saw stops automatically if the blade jams because of the system pressure relief valve. The blade stops rotating maximum 10 sec. after releasing the trigger. Assuring no injury to the operator. The hydraulic cut-off saw from HYCON can be used for horizontal and vertical cutting. Hydraulic direct drive high quality motor assume a minimum of service. Flushing water runs through body and hydraulic motor for extra cooling and to keep all surfaces cold.Assuring no injury to the operator. The hydraulic cut-off saw from HYCON can be used for horizontal and vertical cutting. Hydraulic direct drive high quality motor assume a minimum of service. Flushing water runs through body and hydraulic motor for extra cooling and to keep all surfaces cold.Saw blade diameter: 400 mm Hydraulics: 20-40 L / min at 120 bar max. 172 bar Cutting depth: 162 mm Peripheral speed of the saw blade: 81 m / s Weight: 7.8 kgDelivery without disc (please order separately)
HCS18 - hydraulically driven cut-off machine, Ø 350 mm
The HYCON PREMIUM Cut-off Saw cuts all types of concrete, steel, brick wall, asphalt etc. The HYCON Cut-off saw is a very sturdy tool intended for cutting even under the most extreme conditions. It is completely unaffected by water and dust, and all parts run in oil. The HYCON PREMIUM-saws are build for hard use day after day - without breakdowns. The fact, that the saw is always working and does not require service means higher profits than with e.g. a petrol saw. The saw stops automatically if the blade jams because of the system pressure relief valve. The blade stops rotating maximum 10 sec. after releasing the trigger. Assuring no injury to the operator. The hydraulic cut-off saw from HYCON can be used for horizontal and vertical cutting. Hydraulic direct drive high quality motor assume a minimum of service. Flushing water runs through body and hydraulic motor for extra cooling and to keep all surfaces cold.Saw blade diameter: 450 mm Hydraulics: 20-40 L / min at 120 bar max. 172 bar Cutting depth: 187 mm Peripheral speed of the saw blade: 79 m / s Weight: 8,1 kgDelivery without disc (please order separately)
HCS20 - hydraulically driven cut-off machine, Ø 500 mm
The HYCON PREMIUM Cut-off Saw cuts all types of concrete, steel, brick wall, asphalt etc. The HYCON Cut-off saw is a very sturdy tool intended for cutting even under the most extreme conditions. It is completely unaffected by water and dust, and all parts run in oil. The HYCON PREMIUM-saws are build for hard use day after day - without breakdowns. The fact, that the saw is always working and does not require service means higher profits than with e.g. a petrol saw. The saw stops automatically if the blade jams because of the system pressure relief valve. The blade stops rotating maximum 10 sec. after releasing the trigger. Assuring no injury to the operator. The hydraulic cut-off saw from HYCON can be used for horizontal and vertical cutting. Hydraulic direct drive high quality motor assume a minimum of service. Flushing water runs through body and hydraulic motor for extra cooling and to keep all surfaces cold.Saw blade diameter: 500 mm Hydraulics: 30-40 L / min at 120 bar max. 172 bar Cutting depth: 212 mm Peripheral speed of the saw blade: 59 m / s Weight: 9,2 kgDelivery without disc (please order separately)
SawEZ - Guide rail for HCS16, HCS18 and HRS400
The SawEZ guide rail is a unique system developed to enable contractors and semi-proffesionals to mount a saw without having to stand with a heavy and large wall saw. And at the cost of one tenth of other known wall saw systems. A typical use could be to make a 187 mm pre-cut with the 18” saw, then complete the cut the ring saw that enables a cutting depth of 300 mm. The versatile guide rail system is compatible with our handheld HCS16”, HCS18” and our HRS400 ring saws.The system offers a unique adaptor system that can quickly swap between the saws making it extremely versatile. Another benefit of using the SawEZ guide rail is the ability to use the well-known power of hydraulics constant at 100% without the operator getting tired – Simple as that! The system can be extended to be as long as you wish, as we offer sections of 1-meter rails that easily connect to your SawEZ guide rail.
STANLEY CO23 - hydraulically driven cut-off machine, Ø 350 mm
The CO23 Cut-Off Saw is a hydraulic powered saw for dimensional cutting of metal, concrete, rock, masonry and coral. It has a high torque gear motor and 10" blade capacity for abrasive and diamond wheels with a 1" arbor. The CO23 is designed for underwater operation and is painted hi-visibility yellow.Features:Integral Stanley Hyrevz gear motor produces high torque Direct drive motor Stainless Steel spool and fasteners Adjustable shoe for precise cuts Interlocking safety trigger Cast aluminum handle and guard for durability Counter-clockwise rotation Wide flow rangeDelivery without disc (please order separately)Specifications:Capacity: 10" / 25.4 cm wheel Performance: 3275 rpm @ 15 gpm Arbor: 1" / 2½ cm Circuit Type: Open Center Flow Range: 10-15 gpm / 38-57 l/minOptimum Flow: 15 gpm / 57 l/minWorking Pressure: 1500-2000 psi / 105-140 barFull Relief Setting: 2250 psi / 155 bar Weight: 23 lbs / 10.4 kg Length: 19½" / 49½ cm Width: 11" / 28 cm Hydraulic Ports: -8 SAE O-ring Connection Size and Type: ½" Male Pipe Hose EndCouplers: No (See Accessories) Hose Whips: Yes
STANLEY CO25 - hydraulically driven cut-off saw, Ø 350 mm
Lightweight and Powerful, the Stanley CO23 Underwater and CO25 Cutoff Saws are ideal for cutting concrete, masonry, pipe, structural steel beams and guardrail.CO25 Land Model Multi-Hand Position Cast Aluminum Handle with Interlocking Safety Trigger provides ergonomic grip at a variety of tool angles for reduced operator fatigue.Tamper-Proof Flow Control meets ANSI specification for speed control, reducing the risk of over-speeding the cutting wheel.Cutoff Saws can be used with readily available standard abrasive wheels and wet or dry diamond blades.Internal Blade Brake retards spindle rotation upon release of trigger to greatly reduce wheel coast time.Adjustable Cast Aluminum Wheel Guard is designed to provide excellent durability, allow cutting near obstructions and minimize tool weight.Available Handle Extension Kit provides for upright operation to meet operator preference.OUTPUT CAPACITY 14 in wheel 35.6 cmINPUT FLOW RANGE 7 - 9 gpm 26 - 34 lpmINPUT PRESSURE 1500 - 2000 psi 105 - 140 barOPTIMUM FLOW 8 gpm 30 lpmWEIGHT 20.00 lbs. 9.1 kgLENGTH 21 in 53.3 cmWIDTH 11 in 28 cmMOTOR HYREVZTM GearPORTING 8 SAE O-RingCONNECTOR 3/8 in Male Pipe Hose EndDelivery without disc (please order separately)
Die HYCON Betonsäge ist ein sehr robustes Werkzeug für Schneidarbeiten selbst unter extremsten Bedingungen. Sie ist völlig wasser- und staubunempfindlich und alle Teile laufen in Öl. Die hydraulische Trennsäge von HYCON ist in 3 Varianten in 14", 16", 18" und 20" erhältlich.
Die HYCON PREMIUM-Sägen sind für den harten, täglichen Einsatz ausgelegt – ohne Ausfälle. Die Tatsache, dass die Säge pausenlos arbeitet und keine Wartung benötigt, macht das Werkzeug rentabler als beispielsweise eine Benzinsäge.
Das Werkzeug schaltet sich automatisch ab, wenn sich die Scheibe verklemmt – dadurch keine Verletzungen des Bedieners. Alle Modelle eignen sich zum horizontalen wie auch vertikalen Schneiden. Sie schneiden alle Arten von Beton, Stahl, Mauersteinen, Asphalt usw.