High Pressure Water Pumps

Product information "THY 2715 - Hydraulically driven high-pressure water pump, 27 l/min at 150 bar" The THY 2715 from DOA is a powerful hydraulically driven piston pump for applications with medium water pressure. It delivers up to 27 litres of water per minute at 150 bar and is particularly efficient with a hydraulic oil flow rate of 30 l/min. Thanks to its self-priming piston-piston principle (up to 3 metres), the pump can be used flexibly, but must be installed horizontally and works exclusively with filtered water (Mesh 80). The maximum oil temperature is 60 °C, the permissible water temperature is 50 °C. The scope of delivery includes a pressure control valve, filter and pressure gauge - an oil quantity limiting valve and a speed limiter are not included. With a weight of only 15 kg, the compact unit can also be easily installed in mobile systems.Ideal for professional applications in construction, industry or the municipal sector where reliability and compact design are required. Self-priming pump based on the piston-piston principle.Suction height max. 3 metres Hydraulic input: 25-40 l/min. at max. 210 barOptimum oil flow 30 l/min.Max. Oil temperature: 60°CWater outlet: 27 l/min. at max. 150 barWater temperature: max. 50°CWeight: 15 kgScope of delivery:Pressure control valve, filter, pressure gauge, without oil quantity limiting valve, without speed limiterConnection thread 3/8" The pump must be installed horizontally and is only suitable for filtered water (Mesh 80)

Product information "THY 2715 H - Hydraulically driven high-pressure water pump, 27 l/min at 150 bar with solenoid valve and water bypass" The THY 2715 H from DOA is a robust high-pressure water pump for hydraulic drive and, with 27 l/min at 150 bar, offers a powerful cleaning solution for a wide range of applications. It is based on the proven piston-piston principle and is self-priming up to 3 metres. Particularly practical: This version is equipped with a solenoid valve, water bypass, speed limiter and an oil flow limiting valve - perfect for automated or controlled applications. The optimum hydraulic oil flow rate is 30 litres/min, the permissible range extends from 25 to 40 litres/min at max. 210 bar. Water and oil temperature limits are 50 °C and 60 °C respectively. The pump is installed horizontally and is designed for filtered water (min. mesh 80). The connection thread (3/8") allows easy integration into existing systems. Self-priming pump based on the piston-piston principle.Suction height max. 3 metres Hydraulic input: 25-40 l/min. at max. 210 barOptimum oil flow 30 l/min.Max. Oil temperature: 60°CWater outlet: 27 l/min. at max. 150 barWater temperature: max. 50°CWeight: 15 kgScope of delivery:Pressure control valve, filter, pressure gauge, with oil quantity limiting valve, with speed limiter, with solenoid valve and water by-pass Connection thread 3/8"The pump must be installed horizontally and is only suitable for filtered water (Mesh 80)

Product information "WHY 1520 H - Hydraulically driven high-pressure water pump, 15 l/min at 200 bar with solenoid valve and water by-pass" The WHY 1520 H from DOA combines a compact design with extended safety functions. With a water pressure of up to 200 bar and a flow rate of 15 l/min, it is ideal for demanding cleaning and rinsing applications in municipal or commercial use. The pump works on the piston/piston principle, is self-priming up to 3 m and is designed for operation with 25-40 l/min hydraulic oil at max. 210 bar (optimum: 30 l/min). It has a solenoid valve, water by-pass, a speed limiter and an oil flow limiter - for maximum control and safety in use. The maximum water temperature is 50 °C, the oil temperature must not exceed 60 °C. Operation must be horizontal, water filtration with Mesh 80 is required to ensure the longevity of the components. Self-priming pump based on the piston-piston principle.Suction height max. 3 metres Hydraulic input: 25-40 l/min. at max. 210 barOptimum oil flow 30 l/min.Max. Oil temperature: 60°CWater outlet: 15 l/min. at max. 200 barWater temperature: max. 50°CWeight: 12 kgScope of delivery:Pressure control valve, filter, pressure gauge, with oil quantity limiting valve, with speed limiter, with solenoid valve and water by-pass Connection thread 3/8"The pump must be installed horizontally and is only suitable for filtered water (Mesh 80)

Product information "WHY 1520 HE - Hydraulically driven high-pressure water pump, 15 l/min at 200 bar with adjustable oil volume and speed limitation" The WHY 1520 HE from DOA is a powerful and compact high-pressure piston pump, ideal for cleaning work under constant pressure. It impresses with its precise controllability, including adjustable oil flow limitation, speed limitation and an integrated solenoid valve (12 V) including oil bypass for stand-by operation. With a water delivery volume of 15 l/min at up to 200 bar, the self-priming pump (up to 3 m) is ideal for professional applications. The recommended oil flow rate is 30 l/min at a maximum operating pressure of 210 bar. Thanks to high-quality materials, the pump is designed for temperatures up to 50 °C (water) and 60 °C (oil). Horizontal installation is mandatory. Please only operate with filtered water (Mesh 80). Self-priming pump based on the piston-piston principle.Suction height max. 3 metres Hydraulic input: 25-40 l/min. at max. 210 barOptimum oil flow 30 l/min.Max. Oil temperature: 60°CWater outlet: 15 l/min. at max. 200 barWater temperature: max. 50°CWeight: 12 kgScope of delivery:Pressure control valve, filter, pressure gauge, with adjustable oil volume limiter and speed limiter, with 12V solenoid valve and oil-by-pass for stand-byConnection thread 3/8"The pump must be installed horizontally and is only suitable for filtered water (Mesh 80)

EPW-E150/15-400AC-UV - Electrically driven high-pressure water pump, 15 l/min at 150 barDynaset EPW electric high-pressure water pump converts electricity into high-pressure water. The range includes both AC and DC powered pumps.The EPW electric high-pressure water pump converts electrical energy into high-pressure water and offers a durable, high-quality solution for various applications. With its robust structure and options for AC and DC powered models, this pump is built to perform reliably even in challenging environments. Whether in industrial, municipal or commercial environments, the EPW pump delivers consistent high-pressure water performance with low maintenance, making it an efficient and durable choice for demanding tasks. Accessories for high-pressure cleaning and dust suppression are available.Technical dataFlow rate: 15 l/min at max. 150 barPower: 3.75 kWSuction height: 0 mPre-pressure in the suction line: 1-3 barWater filter: 80 meshElectrical requirementsPower: 4 kWVoltage: 400 VAC (alternating current)Current: max. 9.4 AMotor speed: 1400 min-1Protection class: IP55Dimensions and weightsDimensions: 510x292x265 mm (LxWxH)Weight: 38 kgThe most important advantages and features of AC pumpsProduces high-pressure water suitable for both high-pressure cleaning and dust controlEasy installation thanks to a compact and lightweight structure; utilises the mains supply without the need for a separate motorA maximum pressure of 150 bar (2200 psi) and a flow rate of 15 litres (3.96 gal) ensure powerful performance.IP55 rating - Designed to resist dust ingress and withstand water jets from all directions, ensuring a long service life in challenging environments.400 volt operation, compatible with standard industrial power systems.Always ready for use with low water consumption and low maintenance.Maximum output power of 3.75 kWModels with automatic start/stop are available and offer more convenience.The most important advantages and features of DC pumpsGenerates high-pressure water for mobile useEasy to install and always ready for use as DC pumps are powered by the battery of a machine or vehicle - no inverter requiredAvailable in a range of power levels from 9.8 kW to 16.7 kWIP65 - dust-tight and protected against heavy water spray from all directions, for durability, reliability and safe useHigh pressure capabilities from 170 bar to 450 bar (2465 psi to 6527 psi), maximum flow rates up to 20-50 l/min (5.3-13.2 gal/min) depending on modelAlways ready for use with low water consumption and low maintenance, saving timeSpace-saving due to compact, lightweight designHow does the electric high-pressure water pump work?The electric high-pressure water pump uses an external power supply (AC) as an energy source to generate high-pressure water.The electric high-pressure water pump is connected to the power supply of the machine, vehicle or ship.An integrated electric motor drives the high-pressure water pump.The pump generates water under high pressure for various applications.

EPW-E150/15-400AC-UV-E - Electrically driven high-pressure water pump, 15 l/min at 150 bar with automatic start/stop functionDynaset EPW electric high-pressure water pump converts electricity into high-pressure water. The range includes both AC and DC-fed pumps.The EPW electric high-pressure water pump converts electrical energy into high-pressure water and offers a durable, high-quality solution for various applications. With its robust structure and options for AC and DC powered models, this pump is built to perform reliably even in challenging environments. Whether in industrial, municipal or commercial environments, the EPW pump delivers consistent high-pressure water performance with low maintenance, making it an efficient and durable choice for demanding tasks. Accessories for high-pressure cleaning and dust suppression are available.Technical dataFlow rate: 15 l/min at max. 150 barPower: 3.75 kWSuction height: 0 mPre-pressure in the suction line: 1-3 barWater filter: 80 meshElectrical requirementsPower: 4 kWVoltage: 400 VAC (alternating current)Current: max. 9.4 AMotor speed: 1400 min-1Protection class: IP55Dimensions and weightsDimensions: 510x292x265 mm (LxWxH)Weight: 38 kgThe most important advantages and features of AC pumpsProduces high-pressure water suitable for both high-pressure cleaning and dust controlEasy installation thanks to a compact and lightweight structure; utilises the mains supply without the need for a separate motorA maximum pressure of 150 bar (2200 psi) and a flow rate of 15 litres (3.96 gal) ensure powerful performance.IP55 rating - Designed to resist dust ingress and withstand water jets from all directions, ensuring a long service life in challenging environments.400 volt operation, compatible with standard industrial power systems.Always ready for use with low water consumption and low maintenance.Maximum output power of 3.75 kWModels with automatic start/stop are available and offer more convenience.The most important advantages and features of DC pumpsGenerates high-pressure water for mobile useEasy to install and always ready for use as DC pumps are powered by the battery of a machine or vehicle - no inverter requiredAvailable in a range of power levels from 9.8 kW to 16.7 kWIP65 - dust-tight and protected against heavy water spray from all directions, for durability, reliability and safe useHigh pressure capabilities from 170 bar to 450 bar (2465 psi to 6527 psi), maximum flow rates up to 20-50 l/min (5.3-13.2 gal/min) depending on modelAlways ready for use with low water consumption and low maintenance, saving timeSpace-saving due to compact, lightweight designHow does the electric high-pressure water pump work?The electric high-pressure water pump uses an external power supply (AC) as an energy source to generate high-pressure water.The electric high-pressure water pump is connected to the power supply of the machine, vehicle or ship.An integrated electric motor drives the high-pressure water pump.The pump generates water under high pressure for various applications.

EPW-DUST high-pressure dust suppression system (accessory) for the electric high-pressure water pump EPW150/15-400AC-UVThe EPW-DUST high-pressure dust suppression system from Dynaset is the most innovative dust control system for electric mobile machines in demolition, street cleaning, quarrying, crushing, recycling, etc. The system generates atomised water mist with its electric water pump to suppress dust and prevent emissions from spreading into the environment.The EPW-DUST high-pressure dust control system generates an atomised water mist to effectively suppress dust and prevent harmful emissions from spreading into the environment. This dust control system is powered by an electric high-pressure water pump, while its hydraulic counterpart, the HPW-DUST high-pressure dust suppression system, utilises hydraulics. As the most advanced dust control system for mobile machinery, it is perfect for applications such as demolition, road cleaning, quarrying, crushing, recycling, mining and material handling. The product range includes both AC and DC powered dust collection systems.Designed for efficiency and minimal water consumption, the system improves air quality and working conditions while reducing time, labour and resource requirements. Thanks to its low water consumption, it prevents your construction site from becoming a muddy field, making it a better solution than conventional dust cannons.Technical data EPW-DUST for EPW150/15EPW-DUST is an add-on kit for EPW150/15Delivery rate: 15 l/min at max. 150 barNozzles: 4Suction height: 0 mPre-pressure in the suction line: 1-3 barWater filter: 80 meshElectrical requirementsPower: 4 kWVoltage: 400 VAC (alternating current)Current: max. 45 AMotor speed: 1400 min-1Protection class: IP55The most important advantages and features of a high-pressure dust control systemGenerates a targeted water mist with extremely small droplet size directly at the dust source for effective suppression.Dust suppression is activated directly from the machine cabin when requiredHigh pressure dust suppression reduces PM10 dust concentration during street cleaning by 82% compared to no dust suppression and 52% compared to low pressure systems (based on a neutral study by Metropolia University of Applied Sciences).Keeps the air cleaner after cleaning and reduces health risks on the road and in the workplace (according to a neutral study by Metropolia University of Applied Sciences).Prevents soiling and does not wet the construction site or road, so that brushing and demolition work can be carried out without excess water.Saves time, space, labour costs and water compared to conventional dust suppression systemsImproves working conditions, e.g. visibility, especially during tunnelling work.Dust suppression nozzles can be mounted on machine attachments for targeted application.Includes a wash gun for pressure cleaning.Equipped with a robust and reliable EPW electric high-pressure water pump.The main advantages and features of dust suppression with AC pumpEasy installation thanks to a compact and lightweight structure; utilises the mains supply without the need for a separate motor.A maximum pressure of 150 bar (2200 psi) and a flow rate of 15 litres (3.96 gal) ensure strong performance.IP55 rating - Designed to resist dust ingress and withstand water jets from all directions, ensuring a long service life in challenging environments.400 volt operation, compatible with standard industrial power systems.Always ready for use with low water consumption and low maintenance.Models with automatic start/stop are available for added convenience.How does the high-pressure dust suppression system work?The high-pressure dust suppression system utilises the electrical system of a machine, vehicle or vessel as a power source to generate a high-pressure water mist for dust suppression.The electric high-pressure water pump is connected to the electrical system of the machine (DC) or to the mains (AC).An integrated electric motor drives the high-pressure water pump, which generates water under high pressure for dust control.The water is delivered to the high-pressure nozzles without nozzles at the optimum pressure level, creating an atomised water mist.The atomised water mist, which consists of tiny water droplets, effectively suppresses dust.

EPW-DC200/30 - Electrically driven high-pressure water pump, 30 l/min at 200 barDynaset EPW electric high-pressure water pump converts electricity into high-pressure water.The EPW electric high-pressure water pump converts electrical energy into high-pressure water and offers a durable, high-quality solution for various applications. With its robust structure, this pump is built to work reliably even in difficult environments. Whether in industrial, municipal or commercial environments, the EPW pump delivers consistent high-pressure water performance with low maintenance, making it an efficient and durable choice for demanding tasks. Accessories for high-pressure cleaning and dust suppression are available.Technical dataFlow rate: 30 l/min at max. 200 barSuction height: 0 mPre-pressure in the suction line: 2-3 barWater filter: 80 meshElectrical requirementsVoltage: 400 VDC (direct current)Current: max. 45 AControl voltage: 12-24 V / 2-4 AProtection class: IP65CoolingWater/glycol: 50/50Coolant flow rate: 5 l/min at 2 barCooling input temperature, max.: 50°Cooling power requirement: 2.8 kWDimensions and weightsDimensions: 492x442x373 mm (LxWxH)Weight: 57 kgThe most important advantages and features of DC pumpsGenerates high-pressure water for mobile useEasy to install and always ready for use as DC pumps are powered by the battery of a machine or vehicle - no inverter requiredAvailable in a range of power levels from 9.8 kW to 16.7 kWIP65 - dust-tight and protected against heavy water spray from all directions, for durability, reliability and safe useHigh pressure capabilities from 170 bar to 450 bar (2465 psi to 6527 psi), maximum flow rates up to 20-50 l/min (5.3-13.2 gal/min) depending on modelAlways ready for use with low water consumption and low maintenance, saving timeSpace-saving due to compact, lightweight designHow does the electric high-pressure water pump work?The electric high-pressure water pump uses either the electrical system of a machine, vehicle or ship (DC) as the energy source to generate high-pressure water.The electric high-pressure water pump is connected to the electrical system of the machine, vehicle or ship.An integrated electric motor drives the high-pressure water pump.The pump generates water under high pressure for various applications.

EPW-DUST high-pressure dust suppression system (accessory) for the EPW200/30-400DC-UV electric high-pressure water pumpThe EPW-DUST high-pressure dust suppression system from Dynaset is the most innovative dust control system for electric mobile machines in demolition, street cleaning, quarrying, crushing, recycling, etc. The system generates atomised water mist with its electric water pump to suppress dust and prevent emissions from spreading into the environment.The EPW-DUST high-pressure dust control system generates an atomised water mist to effectively suppress dust and prevent harmful emissions from spreading into the environment. This dust control system is powered by an electric high-pressure water pump, while its hydraulic counterpart, the HPW-DUST high-pressure dust suppression system, utilises hydraulics. As the most advanced dust control system for mobile machinery, it is perfect for applications such as demolition, road cleaning, quarrying, crushing, recycling, mining and material handling. The product range includes both AC and DC powered dust collection systems.Designed for efficiency and minimal water consumption, the system improves air quality and working conditions while reducing time, labour and resource requirements. Thanks to its low water consumption, it prevents your construction site from becoming a muddy field, making it a better solution than conventional dust cannons.Technical data EPW-DUST for EPW200/30DCEPW-DUST is an add-on kit for EPW200/30 - one conveyor beltDelivery rate: 30 l/min at max. 200 barNozzles: 4Suction height: 0 mPre-pressure in the suction line: 1-3 barWater filter: 80 meshElectrical requirementsVoltage: 400 VAC (direct current)Current: max. 45 AControl: 12-24 VDCProtection class: IP65The most important advantages and features of a high-pressure dust suppression systemGenerates a targeted water mist with extremely small droplet size directly at the dust source for effective suppression.Dust suppression is activated directly from the machine cabin when requiredHigh pressure dust suppression reduces PM10 dust concentration during street cleaning by 82% compared to no dust suppression and 52% compared to low pressure systems (based on a neutral study by Metropolia University of Applied Sciences).Keeps the air cleaner after cleaning and reduces health risks on the road and in the workplace (according to a neutral study by Metropolia University of Applied Sciences).Prevents soiling and does not wet the construction site or road, so that brushing and demolition work can be carried out without excess water.Saves time, space, labour costs and water compared to conventional dust suppression systemsImproves working conditions, e.g. visibility, especially during tunnelling work.Dust suppression nozzles can be mounted on machine attachments for targeted application.Includes a wash gun for pressure cleaning.Equipped with a robust and reliable EPW electric high-pressure water pump.The main advantages and features of dust suppression with AC pumpEasy installation thanks to a compact and lightweight structure; utilises the mains supply without the need for a separate motor.A maximum pressure of 150 bar (2200 psi) and a flow rate of 15 litres (3.96 gal) ensure strong performance.IP55 rating - Designed to resist dust ingress and withstand water jets from all directions, ensuring a long service life in challenging environments.400 volt operation, compatible with standard industrial power systems.Always ready for use with low water consumption and low maintenance.Models with automatic start/stop are available for added convenience.How does the high-pressure dust suppression system work?The high-pressure dust suppression system utilises the electrical system of a machine, vehicle or vessel as a power source to generate a high-pressure water mist for dust suppression.The electric high-pressure water pump is connected to the electrical system of the machine (DC) or to the mains (AC).An integrated electric motor drives the high-pressure water pump, which generates water under high pressure for dust control.The water is delivered to the high-pressure nozzles without nozzles at the optimum pressure level, creating an atomised water mist.The atomised water mist, which consists of tiny water droplets, effectively suppresses dust.

EPW-DC200/50 - Electrically driven high-pressure water pump, 50 l/min at 200 barDynaset EPW electric high-pressure water pump converts electricity into high-pressure water.The EPW electric high-pressure water pump converts electrical energy into high-pressure water and offers a durable, high-quality solution for various applications. With its robust structure, this pump is built to work reliably even in difficult environments. Whether in industrial, municipal or commercial environments, the EPW pump delivers consistent high-pressure water performance with low maintenance, making it an efficient and durable choice for demanding tasks. Accessories for high-pressure cleaning and dust suppression are available.Technical dataFlow rate: 50 l/min at max. 200 barSuction height: 0 mPre-pressure in the suction line: 2-3 barWater filter: 80 meshElectrical requirementsVoltage: 400 VDC (direct current)Voltage range: 400-700 VDCCurrent: max. 45 AControl voltage: 12-24 V / 2-4 AProtection class: IP65CoolingWater/glycol: 50/50Coolant flow rate: 5 l/min at 2 barCooling input temperature, max.: 50°Cooling power requirement: 4.3 kWDimensions and weightsDimensions: 492x442x373 mm (LxWxH)Weight: 59 kgThe most important advantages and features of DC pumpsGenerates high-pressure water for mobile useEasy to install and always ready for use as DC pumps are powered by the battery of a machine or vehicle - no inverter requiredAvailable in a range of power levels from 9.8 kW to 16.7 kWIP65 - dust-tight and protected against heavy water spray from all directions, for durability, reliability and safe useHigh pressure capabilities from 170 bar to 450 bar (2465 psi to 6527 psi), maximum flow rates up to 20-50 l/min (5.3-13.2 gal/min) depending on modelAlways ready for use with low water consumption and low maintenance, saving timeSpace-saving due to compact, lightweight designHow does the electric high-pressure water pump work?The electric high-pressure water pump uses either the electrical system of a machine, vehicle or ship (DC) as the energy source to generate high-pressure water.The electric high-pressure water pump is connected to the electrical system of the machine, vehicle or ship.An integrated electric motor drives the high-pressure water pump.The pump generates water under high pressure for various applications.

EPW-DUST high-pressure dust suppression system (accessory) for the EPW200/50-400DC-UV electric high-pressure water pumpThe EPW-DUST high-pressure dust suppression system from Dynaset is the most innovative dust control system for electric mobile machines in demolition, street cleaning, quarrying, crushing, recycling, etc. The system generates atomised water mist with its electric water pump to suppress dust and prevent emissions from spreading into the environment.The EPW-DUST high-pressure dust control system generates an atomised water mist to effectively suppress dust and prevent harmful emissions from spreading into the environment. This dust control system is powered by an electric high-pressure water pump, while its hydraulic counterpart, the HPW-DUST high-pressure dust suppression system, utilises hydraulics. As the most advanced dust control system for mobile machinery, it is perfect for applications such as demolition, road cleaning, quarrying, crushing, recycling, mining and material handling. The product range includes both AC and DC powered dust collection systems.Designed for efficiency and minimal water consumption, the system improves air quality and working conditions while reducing time, labour and resource requirements. Thanks to its low water consumption, it prevents your construction site from becoming a muddy field, making it a better solution than conventional dust cannons.Technical data EPW-DUST for EPW200/50DCEPW-DUST is an add-on kit for EPW200/50 - two conveyor beltsFlow rate: 50 l/min at max. 200 barNozzles: 5Suction height: 0 mPre-pressure in the suction line: 1-3 barWater filter: 80 meshElectrical requirementsVoltage: 400 VAC (direct current)Current: max. 45 AControl: 12-24 VDCProtection class: IP65The most important advantages and features of a high-pressure dust suppression systemGenerates a targeted water mist with extremely small droplet size directly at the dust source for effective suppression.Dust suppression is activated directly from the machine cabin when requiredHigh pressure dust suppression reduces PM10 dust concentration during street cleaning by 82% compared to no dust suppression and 52% compared to low pressure systems (based on a neutral study by Metropolia University of Applied Sciences).Keeps the air cleaner after cleaning and reduces health risks on the road and in the workplace (according to a neutral study by Metropolia University of Applied Sciences).Prevents soiling and does not wet the construction site or road, so that brushing and demolition work can be carried out without excess water.Saves time, space, labour costs and water compared to conventional dust suppression systemsImproves working conditions, e.g. visibility, especially during tunnelling work.Dust suppression nozzles can be mounted on machine attachments for targeted application.Includes a wash gun for pressure cleaning.Equipped with a robust and reliable EPW electric high-pressure water pump.The main advantages and features of dust suppression with AC pumpEasy installation thanks to a compact and lightweight structure; utilises the mains supply without the need for a separate motor.A maximum pressure of 150 bar (2200 psi) and a flow rate of 15 litres (3.96 gal) ensure strong performance.IP55 rating - Designed to resist dust ingress and withstand water jets from all directions, ensuring a long service life in challenging environments.400 volt operation, compatible with standard industrial power systems.Always ready for use with low water consumption and low maintenance.Models with automatic start/stop are available for added convenience.How does the high-pressure dust suppression system work?The high-pressure dust suppression system utilises the electrical system of a machine, vehicle or vessel as a power source to generate a high-pressure water mist for dust suppression.The electric high-pressure water pump is connected to the electrical system of the machine (DC) or to the mains (AC).An integrated electric motor drives the high-pressure water pump, which generates water under high pressure for dust control.The water is delivered to the high-pressure nozzles without nozzles at the optimum pressure level, creating an atomised water mist.The atomised water mist, which consists of tiny water droplets, effectively suppresses dust.

EPW-DC450/20 - Electrically driven high-pressure water pump, 20 l/min at 450 barDynaset EPW electric high-pressure water pump converts electricity into high-pressure water.The EPW electric high-pressure water pump converts electrical energy into high-pressure water and offers a durable, high-quality solution for various applications. With its robust structure, this pump is built to work reliably even in difficult environments. Whether in industrial, municipal or commercial environments, the EPW pump delivers consistent high-pressure water performance with low maintenance, making it an efficient and durable choice for demanding tasks. Accessories for high-pressure cleaning and dust suppression are available.Technical dataFlow rate: 20 l/min at max. 450 barSuction height: 0 mPre-pressure in the suction line: 2-3 barWater filter: 80 meshElectrical requirementsVoltage: 400 VDC (direct current)Voltage range: 400-700 VDCCurrent: max. 45 AControl voltage: 12-24 V / 2-4 AProtection class: IP65CoolingWater/glycol: 50/50Coolant flow rate: 5 l/min at 2 barCooling input temperature, max.: 50°Cooling power requirement: 3.8 kWDimensions and weightsDimensions: 492x442x373 mm (LxWxH)Weight: 58 kgThe most important advantages and features of DC pumpsGenerates high-pressure water for mobile useEasy to install and always ready for use as DC pumps are powered by the battery of a machine or vehicle - no inverter requiredAvailable in a range of power levels from 9.8 kW to 16.7 kWIP65 - dust-tight and protected against heavy water spray from all directions, for durability, reliability and safe useHigh pressure capabilities from 170 bar to 450 bar (2465 psi to 6527 psi), maximum flow rates up to 20-50 l/min (5.3-13.2 gal/min) depending on modelAlways ready for use with low water consumption and low maintenance, saving timeSpace-saving due to compact, lightweight designHow does the electric high-pressure water pump work?The electric high-pressure water pump uses either the electrical system of a machine, vehicle or ship (DC) as the energy source to generate high-pressure water.The electric high-pressure water pump is connected to the electrical system of the machine, vehicle or ship.An integrated electric motor drives the high-pressure water pump.The pump generates water under high pressure for various applications.

The HDF160 hydraulic drilling fluid pump from DYNASET is specially designed for use in demanding applications such as mud drilling, soil washing, rod lubrication or borehole stabilisation. It delivers a constant drilling fluid output of 70 l/min at 160 bar - ideal for efficient and uninterrupted drilling processes. Thanks to a hydraulic flow of 90 l/min at up to 210 bar and a pressure ratio of 1:1.12, the HDF160 works powerfully and precisely - even in changing conditions in the field. It is compatible with all common drilling fluids such as bentonite, mixed polymers or foaming agents. This system can be ideally combined with our products from the augers, drilling rigs and pile drivers range - for complete solutions in civil engineering and specialised foundation engineering. Further information on suitable applications and technical solutions can be found on our DYNASET manufacturer page.Areas of application: Soil washing, flushing drilling, rod lubrication, borehole stabilisation, pressurisation, etc...Properties: Works with all drilling fluids: Bentonite, and mixed polymers, foaming agents, etc...Drilling fluid output: 70 litres/min at 160 barPressure ratio 1 : 1.12Power: 19 kWHydraulic output: 90 l/min at max. 210 bar

The HDF200 hydraulic drilling fluid pump from DYNASET is specially designed for use on drilling sites where a compact but high-pressure solution is required. With an output of 40 l/min at 200 bar, it reliably provides continuous drilling fluid - even in difficult ground conditions. The system is ideal for applications such as soil washing, flushing drilling, rod lubrication or the stabilisation of boreholes. It easily processes a wide variety of flushing fluids such as bentonite, foaming agents or mixed polymers. With a hydraulic requirement of 55 l/min at up to 210 bar and a pressure ratio of 1:1.26, the pump offers a strong ratio of performance to energy requirement - ideal for mobile and stationary applications. We also recommend our systems for augers, drilling rigs and drill rigs, which can be ideally combined with the HDF200. You can find more information on hydraulic solutions for drilling technology on our DYNASET overview page. Areas of application: Soil washing, flush drilling, rod lubrication, borehole stabilisation, pressurisation, etc...Properties: Works with all drilling fluids: Bentonite, and mixed polymers, foaming agents, etc...Drilling fluid output: 40 litres/min at 200 barPressure ratio 1 : 1.26Power: 13 kWHydraulic output: 55 l/min at max. 210 bar

The HDF210 hydraulic drilling fluid pump delivers 23 l/min at 210 bar and is ideal for applications where precision and compact design are required. With a hydraulic requirement of 35 l/min at up to 220 bar, it is particularly suitable for mobile drilling rigs and compact rigs. Thanks to its compatible flow rate, the pump works efficiently with all common flushing media such as bentonite, foaming agents or mixed polymers - perfect for soil washing, rod lubrication, flushing drilling and similar tasks in the geotechnical sector. The power consumption is 8 kW, the pressure ratio is 1:1.18 - for reliable pressure transmission without power loss. You can find more components for your drilling site in our category Drilling rigs, earth drills & pile drivers. Find out more about DYNASET technology on our brand page.Areas of application: Soil washing, flush drilling, rod lubrication, borehole stabilisation, pressurisation, etc...Properties: Work with all drilling fluids: Bentonite, and mixed polymers, foaming agents, etc...Drilling fluid output: 23 litres/min at 210 barPressure ratio 1 : 1.18Power: 8.0 kWHydraulic output: 35 l/min at max. 220 bar

The HDF250 hydraulic drilling fluid pump is designed for high-flow applications and achieves a drilling fluid output of 250 l/min at 200 bar. It is hydraulically operated and requires a hydraulic output of 280 l/min at max. 210 bar. The pump is suitable for use with all common drilling fluids, including bentonite, mixed polymers and foaming agents. It therefore covers a wide range of applications - from soil washing and rod lubrication to borehole stabilisation and pressurisation. With a pressure ratio of 1:1.06 and a drive power of 85 kW, the HDF250 guarantees high efficiency and stable pumping conditions - even under demanding operating conditions. You can find more information about the manufacturer in our Dynaset brand overview. You can find additional components for the drilling site under Augers & Drilling rigs. Areas of application: Soil washing, flush drilling, rod lubrication, borehole stabilisation, pressurisation, etc...Properties: Work with all drilling fluids: Bentonite, and mixed polymers, foaming agents, etc...Drilling fluid output: 250 l/min at 250 barPressure ratio 1 : 1.06Power: 85 kWHydraulic output: 280 l/min at max. 210 bar

The HDF40 hydraulic drilling fluid pump offers a delivery rate of 40 l/min at 40 bar and is designed for tasks with low pressure requirements. With a pressure ratio of 1:0.2 and a power consumption of 2.6 kW, the unit is ideal for compact drilling systems or mobile applications. The required hydraulic output is 8 l/min at max. 210 bar. The system is compatible with all common drilling fluids such as bentonite, mixed polymers and foaming agents. Typical applications include soil washing, rod lubrication, borehole stabilisation, mud drilling and pressurisation for light drilling work. You can find more solutions for the drilling site under Augers & Drilling rigs. Find out more about the brand on our Dynaset manufacturer page.Areas of application: Soil washing, flush drilling, rod lubrication, borehole stabilisation, pressurisation, etc. .. Properties: Works with all drilling fluids: Bentonite, and mixed polymers, foaming agents, etc...Drilling fluidoutput : 40 litres/min at 40 barPressure ratio 1 : 0.2Power: 2.6 kWHydraulic output: 8 l/min at max. 210 bar

The HDF90 is a powerful hydraulic drilling fluid pump for demanding applications in the field of geotechnics and ground investigation. With a flushing capacity of 150 l/min at 90 bar, it is suitable for a wide range of application scenarios such as soil washing, flushing drillings, rod lubrication, borehole stabilisation or pressurisation. The system operates with a pressure ratio of 1:0.52 and is designed for a hydraulic output of 85 l/min at max. 210 bar. The power requirement is 23 kW. The pump is compatible with all common rinsing agents - including bentonite, foaming agents and various mixed polymers. It has a robust design and is suitable for continuous use under the toughest construction site conditions. You can find more drilling technology in our augers & drilling equipment category. Detailed information on the manufacturer can be found in the Dynaset brand overview.Areas of application: Soil washing, flush drilling, rod lubrication, borehole stabilisation, pressurisation, etc...Properties: Works with all drilling fluids: Bentonite, and mixed polymers, foaming agents, etc...Drilling fluid output: 150 l/min at 90 barPressure ratio 1 : 0.52Power: 23 kWHydraulic output: 85 l/min at max. 210 bar

Extreme pressure for the highest demands - the HPW1000 high-pressure water pump from DynasetThe HPW1000 is a powerful, hydraulically driven high-pressure water pump for demanding applications in industry, construction and municipal technology. With a maximum water pressure of 1000 bar at a delivery rate of 30 litres per minute, this model is ideal for tasks such as concrete restoration, industrial cleaning or use in special vehicles. Thanks to the robust piston-piston principle, the pump is self-priming up to a height of 3 metres. The unit is driven via a hydraulic input with 140 l/min at up to 260 bar, which enables a total output of 50 kW. The pressure ratio of 1:4 ensures maximum efficiency during operation. A cooling capacity of 8 kW is required for safe continuous operation. The HPW1000 comes from the proven manufacturer Dynaset - find out more on our manufacturer page. You can find more high-pressure water pumps hereSuitable attachments for construction, agricultural and municipal machinery Self-priming pump based on the piston-piston principle.Suction height max. 3 metresHydraulic input: 140 l/min. at max. 260 barWater output: 30 l/min. at max. 1000 barPower: 50 kWWater/hydraulic pressure ratio: 1 : 4Required cooling capacity: 8 kWScope of deliveryHigh-pressure pump

Maximum cleaning power with the HPW1200 - high-pressure water pump for industrial applications The HPW1200 from Dynaset is the perfect choice when uncompromising performance is required. With a water output of 100 litres per minute at up to 1,200 bar pressure, the pump is ideal for applications in heavy industry, concrete restoration or high-pressure cleaning in special vehicle construction.The proven piston-piston principle ensures reliable operation and self-priming function. The pump is driven by a hydraulic flow of 440 l/min at up to 350 bar - this gives it an output of 200 kW. The ratio of water pressure to hydraulic pressure is 1:4, with a cooling requirement of 35 kW. Despite its enormous power, the unit is comparatively compact at 177 kg. The quality of the HPW1200 stands for durability and efficiency - developed by the Finnish high-pressure specialist Dynaset. Discover more high-pressure water pumps in our rangeFind out about suitable attachments for construction, agricultural and municipal machinery Self-priming pump based on the piston-piston principle.Hydraulic input: 440 l/min. at max. 350 bar Water output: 100 l/min. at max. 1,200 barPower: 200 kWWater/hydraulic pressure ratio: 1 : 4Required cooling capacity: 35 kWDimensions: 915x350x265 mmWeight: 177 kgScope of deliveryHigh pressure pump

HPW130 - Hydraulically driven high-pressure pump for versatile applications up to 130 bar The HPW130 from Dynaset impresses with its high delivery rate of 180 litres per minute at 130 bar - ideal for large-scale cleaning tasks, dust control or irrigation in the construction and municipal sectors. The compact unit works according to the robust piston-piston principle and is self-priming up to a depth of 3 metres. It is driven via the hydraulic circuit - with an input of 140 l/min at up to 240 bar. The effective output is 38 kW, the pressure ratio between water and hydraulics is 1 : 2.03. A cooling capacity of 6 kW is required for reliable continuous operation. The HPW130 is ideal for use on vehicles and machines with powerful hydraulic systems. Like all Dynaset high-pressure pumps, it offers high efficiency with minimum maintenance. Discover more models: High-pressure water pumps at KW HydraulikApplication examples: Attachments for construction, agricultural and municipal machinery Self-priming pump based on the piston-piston principle.Suction height max. 3 metresHydraulic input: 140 litres/min. at max. 240 barWater output: 180 l/min. at max. 130 barPower: 38 kWWater/hydraulic pressure ratio: 1 : 2.03Required cooling capacity: 6 kWScope of deliveryHigh-pressure pump

HPW130 with recirculation valve - Hydraulically driven high-pressure pump with 130 bar The HPW130 with recirculation valve from Dynaset is a powerful, self-priming high-pressure water pump for demanding cleaning and spraying applications. With a delivery rate of 140 litres per minute at 130 bar, it is ideal for use in construction, industrial or municipal technology. The proven piston-piston principle ensures a long service life and reliable performance - even with varying requirements. Thanks to the integrated circulation valve, the water circuit is efficiently regulated, reducing wear and optimising energy consumption. The pump is designed for a hydraulic inflow of 140 l/min at max. 240 bar, with a required cooling capacity of 6 kW. Further information on technology and possible applications can be found on the following pages:Area of application: Construction, agricultural and municipal technologyTo the overview of all high-pressure water pumps Self-priming pump based on the piston-piston principle.Suction height max. 3 metres Hydraulic input: 140 l/min. at max. 240 barWater outlet: 140 l/min. at max. 130 barPower: 38 kW Water/hydraulic pressure ratio: 1 : 2.03Required cooling capacity: 6 kWScope of delivery:High-pressure pump with circulation valve

HPW160 - Hydraulically driven high-pressure pump with 160 bar The HPW160 from Dynaset is a compact but powerful high-pressure water pump based on the proven piston/piston principle, which is particularly suitable for smaller applications with limited hydraulic volume. With a delivery rate of 18 litres per minute at 160 bar, it delivers precise cleaning power while using energy efficiently. It works reliably with a hydraulic inflow of 18 litres/min at max. 210 bar and requires only 1 kW cooling power. The self-priming function with a suction height of up to 3 metres extends the range of applications - from municipal vehicles to construction sites. Further information is available at: Areas of application: Construction, agricultural and municipal technology Discover more high-pressure pumps Self-priming pump based on the piston-piston principle.Suction height max. 3 metres Hydraulic input: 18 l/min. at max. 210 barWater outlet: 18 l/min. at max. 160 barPower: 4.8 kW Water/hydraulic pressure ratio: 1 : 0.88Required cooling capacity: 1 kWScope of deliveryPump

HPW160 - Hydraulic high-pressure water pump with recirculation valve and pressure gauge The HPW160 from Dynaset is a reliable high-pressure water pump for professional use, especially where compact solutions with constant performance are required. With a delivery rate of 18 litres per minute at up to 160 bar, it is ideal for precise cleaning and rinsing work. The self-priming piston-piston pump achieves a suction height of up to 3 metres. Thanks to the integrated recirculation valve, the water flow can be safely diverted when the lance is closed. The pressure gauge also ensures simple and reliable pressure monitoring during operation. The pump operates with a hydraulic inflow of 18 l/min at max. 210 bar, delivering 4.8 kW of power and requiring only 1 kW of cooling power - an efficient solution for flexible field use. Further information and suitable solutions can be found at Areas of application: Construction, agricultural and municipal technology To the overview of all high-pressure water pumps Self-priming pump based on the piston-piston principle.Suction height max. 3 metres Hydraulic input: 18 l/min. at max. 210 barWater outlet: 18 l/min. at max. 160 barPower: 4.8 kW Water/hydraulic pressure ratio: 1 : 0.88Required cooling capacity: 1 kWScope of delivery:High-pressure pump with circulation valve and pressure gauge