Hand-hydraulische Pressen

With the HP131C26 hand-held hydraulic crimping tool from STANLEY-DUBUIS , you cancrimp copper cable lugs up to 400 mm² and aluminium cable lugs up to 240 mm². Thanks to the two-stage hydraulic system, the number of pump movements is reduced, making the HP131C26 ideal for assembly work.Thanks to our in-house production of crimping dies, you benefit from a large selection of different crimping die contours. Our range also includes matching inserts from the KLAUKE 13 series, which are precisely matched to this tool.Manual retraction is possible at any time if required. Please note, however, that this manual hydraulic crimping tool is not recommended for mass production.Hydraulic cable press for "130-C" series press inserts, compatible with KLAUKE series "13", DUBUIS "C130"Ideally suited for assembly work.Rotatable, open crimping heads, opening width 26 mmTwo-stage hydraulic system reduces the number of pump movementsNEW! Piston protection stop prevents damage.This system prevents damage to the press insert holder in the event of accidental use without insertsPressing force 130 kN, enables pressing of:max. 400 mm² copper cable lugsmax. 240 mm² aluminium cable lugsHalf-round crimping dies suitable for all standard 130 kN toolsExtremely large selection of different crimping insert contoursAutomatic pressure limitationManual return possible at any time if requiredNot recommended for mass production Scope of delivery:- Pressing tongs- Transport case

With the HP131C32 hand-held hydraulic crimping tool from STANLEY-DUBUIS, you can crimp copper cable lugs up to 400 mm² and aluminium cable lugs up to 240 mm². Thanks to the two-stage hydraulic system, the number of pump movements is reduced, making the HP131C26 ideal for assembly work. With an opening width of 32 mm , the crimping tool also has a rotatable and open crimping head. Thanks to our in-house production of crimping dies, you benefit from a large selection of different crimping die contours. Our range also includes matching inserts from the KLAUKE 13 series, which are precisely matched to this tool. You will find these inserts as recommended items below.Thanks to the integrated piston protection stop, you can prevent accidental damage to your crimping tool. Hydraulic cable press for crimping dies series "130-C", compatible with KLAUKE series "13", DUBUIS "C130"Ideally suited for assembly work.Rotatable, open crimping heads, opening width 32 mmTwo-stage hydraulic system reduces the number of pump movementsNEW! Piston protection stop prevents damage.This system prevents damage to the press insert holder in the event of accidental use without insertsPressing force 130 kN, enables pressing of:max. 400 mm² copper cable lugs max. 240 mm² aluminium cable lugs Half-round crimping dies suitable for all standard 130 kN toolsExtremely large selection of different crimping insert contours Automatic pressure limitationManual return possible at any time if requiredNot recommended for mass productionScope of delivery:- Pressing tongs- Transport case

The HP131C38 manual hydraulic cable crimper from STANLEY-DUBUIS is ideal for assembly work thanks to its two-stage hydraulic system. The rotatable, open crimping head with an opening width of 38 mm enables a crimping force of up to 130 kN.You can find suitable pressing inserts in our online shop, including inserts that are compatible with the KLAUKE 13 series. This crimping tool also has an automatic pressure limiter, which ensures safe and precise crimping.Hydraulic cable crimper for crimping dies series "130-C", compatible with KLAUKE series "13", DUBUIS "C130"Ideally suited for assembly work.Rotatable, open crimping heads, opening width 38 mmTwo-stage hydraulic system reduces the number of pump movements NEW! Piston protection stop prevents damage. This system prevents damage to the press insert holder in the event of accidental use without inserts Pressing force 130 kN, enables pressing of:max. 400 mm² copper cable lugsmax. 240 mm² aluminium cable lugsSuitable for crimping H terminals up to 2x120 mm²Half-round crimping dies suitable for all standard 130 kN tools Extremely large selection of different crimping insert contours Automatic pressure limitationManual return possible at any time if required Not recommended for mass production Scope of delivery:- Pressing tongs- Transport case

The HP131U manual hydraulic crimping tool has rotating, closed crimping heads with an integrated insert holder. Manual retraction is possible at any time if required. As you would expect from STANLEY-DUBUIS, the crimping tool is equipped with a two-stage hydraulic system that reduces the number of pump movements. This makes the HP131U ideal for assembly work. With a crimping force of 130 kN, copper cable lugs up to 400 mm² and aluminium cable lugs up to 240 mm² can be crimped effortlessly.Hydraulic cable crimper for "130-C" series crimping dies, compatible with KLAUKE "13" series, DUBUIS "C130"Ideally suited for assembly work.Not recommended for mass productionRotatable, closed pressing heads, incl. insert holderTwo-stage hydraulic system reduces the number of pump movementsNEW! Piston protection stop prevents damage.This system prevents damage to the press insert holder in the event of accidental use without insertsPressing force 130 kN, enables pressing of:max. 400 mm² copper cable lugs max. 240 mm² aluminium cable lugs Suitable for crimping deep groove connectors Semicircular crimping dies suitable for all standard 130 kN toolsExtremely large selection of different crimping insert contours Automatic pressure limitationManual return possible at any time if requiredScope of delivery:- Crimping pliers with adapter for inserts series 130-C (compatible: Klauke 13)- Transport case

The HP36hand-held hydraulic crimping toolis a robust and powerful hydraulic cable crimper from STANLEY-DUBUIS. The compact, rotatable, closed crimping head with hinged lock enables precise work even in confined areas. 35 kN crimping force allows copper cable lugs to DIN 46235 up to 120 mm² and aluminium cable lugs up to 150 mm² to be crimped effortlessly.The HP36 is supplied in a custom-fit case for fast, flexible use and safe transport.Hydraulic cable crimper for crimping dies series "35", compatible with Klauke series "4", DUBUIS "D35"Compact, rotatable, closed crimping head with hinged closure for crimping in tight spacesCrimping force 35 kN, enables crimping of:max. 120 mm² copper cable lugs to DIN 46235max. 150 mm² aluminiumSupplied in a caseAutomatic switch-off after reaching the maximum pressure (pressure relief valve)Compatible with FACOM 985913Scope of delivery:Hand-held hydraulic crimping tool in case, without inserts

The HP60CK hydraulic cable crimping tool is particularly impressive for crimping in tight spaces. Thanks to the pressure relief valve, the crimping tool switches off once the maximum pressure has been reached. You can crimp with up to 62 kN with the hand-operated hydraulic crimping tool from STANLEY-DUBUIS. You can find suitable crimping dies, also for the KLAUKE Series 22, in our online shop.You can crimp copper cable lugs to DIN 46235 and aluminium up to max. 300 mm². The HP60CK is supplied in a sturdy case for safe storage of the crimping tool.Hydraulic cable crimper for crimping dies series "60-CK", compatible with KLAUKE series "22", DUBUIS "D62"Hydraulic press, double piston hydraulics = fast feedCompact, rotatable, closed press head with hinged lock to enable pressing even in confined areasPressing force 62 kN, enables pressing of:max. 300 mm² copper cable lugs to DIN 46235max. 300 mm² aluminium Supplied in a caseAutomatic switch-off after reaching the maximum pressure (pressure relief valve)Scope of delivery:Hand-held hydraulic crimping tool in case, without inserts

The HP60H manual hydraulic cable crimper impresses with a crimping force of 55 kN and double-piston hydraulics. Thanks to the compact, rotatable and closed crimping head, you can crimp in tight spaces with little effort. Thanks to the pressure relief valve, the HP60H from STANLEY-DUBIUS also has an integrated automatic switch-off function once the maximum pressure has been reached. The crimping tool is also compatible with KLAUKE Series 5, and you can find suitable crimping dies for this series in our online shop.Hydraulic cable press for crimping dies series "60-H" and "50", compatible with KLAUKE series "5", DUBUIS "D51", BEKU 30x30x1212Hydraulic press, double piston hydraulics = fast feedCompact, rotatable, closed press head with hinged lock to enable pressing even in confined areasCrimping force 55 kN, enables crimping of:max. 240 mm² copper cable lugs to DIN 46235 max. 185 mm² aluminium Supplied in a caseAutomatic switch-off after reaching the maximum pressure (pressure relief valve)Scope of delivery:Hand-held hydraulic crimping tool in case, without inserts

The hand-hydraulic HP60HE cable crimper from STANLEY-DUBUIS crimps with a crimping force of 55 kN and is equipped with double-piston hydraulics. Thanks to the compact, rotatable and closed crimping head, you can crimp in tight spaces with little effort. Thanks to the pressure relief valve, the HP60HE also has an integrated automatic switch-off function once the maximum pressure has been reached. The crimping tool is also compatible with KLAUKE Series 5, and you can find suitable crimping dies for this series in our online shop.The HP60HE is supplied as standard with a practical case in which the cable crimping tool is safely stored and ready for use at any time. Matching crimping dies are also available.Hydraulic cable press for crimping dies series "60-H" and "50", compatible with KLAUKE series "5", DUBUIS "D51", BEKU 30x30x12Compact, rotatable, closed crimping head with hinged lock for crimping in tight spacesCrimping force 55 kN, enables crimping of:max. 240 mm² copper cable lugs to DIN 46235 max. 185 mm² aluminium Supplied in a caseAutomatic switch-off after reaching the maximum pressure (pressure relief valve)Scope of delivery:Hand-held hydraulic crimping tool in case, without inserts