Double Acting Hydraulic High Pressure Pumps
Diese Hydraulikaggregate dienen zum Antrieb doppeltwirkender Werkzeuge und Zylinder.
Varianten mit Magnetventile, Handventil oder ohne Ventil.
BHP-SE - HYDRA FUTURE - Battery hydraulic pump with integrated battery for single acting tools
This unit is used to operate single-acting tools and cylindersFor use with internally fitted battery or mains operation
230V/50Hz up to 850bar Automatic recognition of pressure demand with cut off
function when required pressure is reached (20-850 bar). Useable for all tools with an oil demand up to 900 ml
Maximum output oil pressure can be preset by software to
suit customers requirements, e.g. 700bar Energy saving mode – Pump switches off 10 minutes after
last cycle or at low battery Battery safety function – Pump switch off by low battery,
controlled by electronic system Automatic cut off when no load after working cycle (i.e.
punching tools in order to protect dies and save energy) Solid plastic housing – (control buttons, coupling devices
and display are well prodected) 66 Volt Li-Ion Battery – The capacity of the battery is
sufficient for one working day of electric installation work, Standard 4,2 AhOptional: 6,3 Ah DC-Disk engine Standard: max. 1000 W
Optional: max. 2500 W Cable remote control
optional: wireless remote control optional: foot switch Pressure control at the LED display (integratet pressure
sensor) Shipment:
- Battery hydraulic pump with integral battery- Charger - Cable remote control
EHP-CB700-230V-DE - Hydraulic power pack with 400 Volt electric engine for double acting tools
230 volt electrohydraulic pump
2000 watt 1-phase motor for high torque, starting under pressure is possible
High capacity of max. 2 L / min. at max. 700 BAR
Two solenoid valves
Cable remote control
Connection for wired remote control or direct connection of tools with electrical operation
Function: Extend - Hold position under pressure - Retract
23 liters hydraulic tank
EHP-CB700-230V-DE-C - Hydraulic power pack with 400 Volt electric engine for double acting tools
230 volt electrohydraulic pump
2000 watt 1-phase motor for high torque, starting under pressure is possible
High capacity of max. 2 L / min. at max. 700 BAR
Two solenoid valves
With IntercoolerCable remote control
Connection for wired remote control or direct connection of tools with electrical operation
Function: Extend - Hold position under pressure - Retract
23 liters hydraulic tank
EHP-CB700-230V-DM-C - Hydraulic power pack with 400 Volt electric engine for double acting tools
230 volt electrohydraulic pump
2000 watt 1-phase motor for high torque, starting under pressure is possible
High capacity of max. 2 L / min. at max. 700 BAR
Mechanical hand valveWith oil cooler (intercooler)For using with tools with own control valve or controling at the pumpFunction: Extend - Hold position under pressure - Retract
23 liters hydraulic tank
EHP-CB700-400V-DE - Hydraulic power pack with 400 Volt electric engine for double acting tools
400 volt electrohydraulic pump
4000 watt 3-phase motor for high torque, starting under pressure is possible
High capacity of max. 4 L / min. at max. 700 BAR
Two solenoid valves
Cable remote control
Connection for wired remote control or direct connection of tools with electrical operation
Function: Extend - Hold position under pressure - Retract
23 liters hydraulic tank
EHP-CB700-400V-DE-C - Hydraulic power pack with 400 Volt electric engine for double acting tools
400 volt electrohydraulic pump
4000 watt 3-phase motor for high torque, starting under pressure is possible
High capacity of max. 4 L / min. at max. 700 BAR
Two solenoid valves
With IntercoolerCable remote control
Connection for wired remote control or direct connection of tools with electrical operation
Function: Extend - Hold position under pressure - Retract
23 liters hydraulic tank
EHP-CB700-400V-DE-C-L7 - Hydraulic power pack with 400 Volt electric engine for double acting tools
400 volt electrohydraulic pump
4000 watt 3-phase motor for high torque, starting under pressure is possible
High capacity of max. 7,5 L / min. at max. 700 BAR
Two solenoid valves
With IntercoolerCable remote control
Connection for wired remote control or direct connection of tools with electrical operation
Function: Extend - Hold position under pressure - Retract
90 liters hydraulic tank
%
EHP-CB700-400V-DM-C - Hydraulic power pack with 400 Volt electric engine for double acting tools
400 volt electrohydraulic pump
4000 watt 3-phase motor for high torque, starting under pressure is possible
High capacity of max. 4 L / min. at max. 700 BAR
Mechanical hand valveWith oil cooler (intercooler)For using with tools with own control valve or controling at the pumpFunction: Extend - Hold position under pressure - Retract
23 liters hydraulic tank
EHP-CB700-400V-DM-C-L7 - Hydraulic power pack with 400 Volt electric engine for double acting tools
400 volt electrohydraulic pump
4000 watt 3-phase motor for high torque, starting under pressure is possible
High capacity of max. 7,5 L / min. at max. 700 BAR
Mechanical hand valveWith oil cooler (intercooler)For using with tools with own control valve or controling at the pumpFunction: Extend - Hold position under pressure - Retract
90 liters hydraulic tank
FHP2-500BAR-DW - Hydraulic foot pump for double-acting tools
Working pressure:
max. 500 bar / 7.252 PSI
Robust and hard-wearing metal design (no plastic parts)
Double piston pump with automatic delivery changeover (low pressure - high pressure) at 20 bar
4/3-way valve mounted directly on the pump
without coupling socket and without coupling plug
Very high delivery rate in rapid advance (LP): 17 cm³
Delivery rate in the high pressure range (HD): 1.7 cm³
Transport case optionally available
Usable oil volume: 1.3 liters
Weight: 8.5 kg
Working pressure: 500 BAR
GHP-CB700-DM-C - Hydraulic power pack with gasoline engine for double acting tools
Hydraulic power pack with 5,5 HP gasoline engineHigh capacityLow pressure: 6 L/min. at max. 100 BARHigh pressure: 1,6 L/min. at max. 700 BARMechanical hand valveWith oil cooler (intercooler)For using with tools with own control valve or controling at the pumpFunction: Extend - Hold position under pressure - Retract
23 liters hydraulic tank
GHP-VDS700-DM - Hydraulic power pack with 400 Volt electric engine for double acting tools
Hydraulic pump with 230 volt electric motor
1.4 kW motor (14000 rpm)
Delivery rate: 3 L/min to max. 700 BARTwo solenoid valves
2.3 liter hydraulic tank
Dimensions: 374 x 230x 351 mm
Weight: 16,9 kg
GHP-VDS700-DM - Hydraulic power pack with 400 Volt electric engine for double acting tools
hydraulic pump with gasoline engine1,35 HP HONDA motor (7000 rpm)Oil flow2 L/min up to 100 BAR
1 L/min up to 700 BARmanual control valve2,3 liters hydraulic tank
GHP-VDS700-G28-230V-DM - Hydraulic power pack with 400 Volt electric engine for double acting tools
Hydraulic pump with 230 volt electric motor
1.5 kW motor (2800 rpm)
Delivery rate: 1,2 L/min to max. 700 BARTwo solenoid valves2.3 liter hydraulic tank
Dimensions: 362 x 229 x 441 mm
Weight: 27 kg
GHP-VDS700-G28-230V-DM - Hydraulic power pack with 400 Volt electric engine for double acting tools
Hydraulic pump with 230 volt electric motor
1.5 kW motor (2800 rpm)
Delivery rate: 1,2 L/min to max. 700 BARMechanical hand valve2.3 liter hydraulic tank
Dimensions: 362 x 229 x 441 mm
Weight: 27 kg
GHP-VDS700-G28-230V-DM - Hydraulic power pack with 400 Volt electric engine for double acting tools
Hydraulic pump with 230 volt electric motor
1.5 kW motor (2800 rpm)
Delivery rate: 1,2 L/min to max. 700 BARMechanical hand valveIntercooler2.3 liter hydraulic tank
Dimensions: 362 x 229 x 441 mm
Weight: 27 kg
GHP-VDS700-G28-230V-DM - Hydraulic power pack with 400 Volt electric engine for double acting tools
Hydraulic pump with 230 volt electric motor
1.5 kW motor (2800 rpm)
Delivery rate: 1,2 L/min to max. 700 BARTwo solenoid valvesIntercooler2.3 liter hydraulic tank
Dimensions: 362 x 229 x 441 mm
Weight: 27 kg
MHP2-4,9L-DW - hydraulic hand pump for double-acting tools, with two-stage hydraulics, 500/625/700/850 bar
(1) Hydraulic oil reservoir:
4,9 Liter
Manual hydraulic pump with two-stage hydraulics including pressure gauge
For double-acting tools and cylindersTwo-stage hydraulics (rapid feed)
Maximum pressure: optionally 500/625/700/850 bar (individually adjustable at the factory on request)
tank size: 4,9 liters
These hydraulic units are used to drive double-acting tools and cylinders.
There are these units in versions:
- with solenoid valves for operating
- Tools with fixed electrical operation or
- Tools without their own control valve with a separate remote control - with manual valve for operating tools without own control valve
- without valve for operating tools with integrated mechanical control valve