Self-propelled drilling rigs
Erfahren Sie mehr über unsere selbst fahrenden Bohr- und Rammgeräte von HYDRA. Ob Brunnenbohrung, Solarfeldmontage oder Ankerbohrungen, wir liefern die passende Lösung.
Filter
–
HYDRA GEO-EASY - Self-Propelled Static / Dynamic Penetration Meter
Static / dynamic penetrometer GEO-EASY-10 and GEO-EASY-20 for geotechnical testing and drilling with auger rod for sampling. These machines were developed to carry out geological sampling and investigations on soil. The most important aspects were user friendliness, easy transport due to small dimensions, versatile areas of application. Controllable at a distance with control panel. The standard equipment allows 4 types of samples to be carried out: Static tests up to 100 kN for GEO-EASY-10, 200 kN for GEO-EASY-20 Heavy dynamic tests Sampling and rotary drilling Sampling with a percussion drill Options: Semi-automated method with data collection piezocones Machine standard equipment: rotary head Static testing instrument Dynamic testing instrument 1 BEGEMANN drill bit 20 m bars for static tests 1 dynamic drill bit 20 m bars for dynamic tests 1 extension system for dynamic and static bars 2 lateral anchors 1 screw anchor pull system 2 hydraulic rotary heads for anchor operation 1 data display 1 tool box with wrench set
HYDRA JOY3-GEO+SL400+HR55-HR40 - self-propelled vertical drilling rig
Hydraulic drilling rig JOY-3-GEO+SL400+TR1200 Fully equipped for geothermal drilling Special model specially equipped for drilling boreholes in the field of geothermal energy (heat pumps).Furnishing:DOOSAN D34 diesel engine STAGE V with 100 kW Mount SL400 with 3600mm strokepressure and traction (each 10 tons) KRUPP HR55-HR40 double head drilling rigRotational movement of the tube: max. 50 revolutions per minute at 48,000 Nm, free passage 95 mmRotational movement of the rod: max. 220 revolutions per minute at 13,000 Nm, free passage 50 mm Fixing table for the horizontal displacement of the hydraulic rotary actuator radio remote control Triple pump 300 L/min at 50 bar Worm pump 1000 L/min at 20 bar Double clamp Ø205mm Movable on the mast, swiveling upper clamp (crushing cylinder) lower clamp, Shifting cylinder along the mast with 400 mm strokeWinch, 25 meter rope, 3000 kg lifting capacity 40 tubes Ø152x1500 mm (60 m)Crown for tubes Ø 152 mm External driver Ø 152 mm Internal driver Ø 90/152 mm (2"3/8api) 40 poles Ø 88.9x1500 mm (2"3/8api R.) (60 m)Down-the-hole hammer 5" (approx. 125 mm) Drill tip for down-the-hole-hammer This description is for guidance only. You cannot order this product online. The ordering process triggers only one request.
HYDRA JOY3-GEO+SL400+TR1200 - self-propelled vertical drilling rig
Hydraulic drilling rig JOY-3-GEO+SL400+TR1200 Fully equipped for geothermal drilling Special model specially equipped for drilling boreholes in the field of geothermal energy (heat pumps).Furnishing:DOOSAN D34 diesel engine STAGE V with 100 kW Mount SL400 with 3600mm strokepressure and traction (each 10 tons) TR1200 hydraulic drill head 30-600 rpm Fixing table for the horizontal displacement of the hydraulic rotary actuator radio remote control Triple pump 300 L/min at 50 bar Worm pump 1000 L/min at 20 bar Double clamp Ø205mm Movable on the mast, swiveling upper clamp (crushing cylinder) lower clamp, Shifting cylinder along the mast with 400 mm strokeWinch, 25 meter rope, 3000 kg lifting capacity 40 tubes Ø152x1500 mm (60 m)Crown for tubes Ø 152 mm External driver Ø 152 mm Internal driver Ø 90/152 mm (2"3/8api) 40 poles Ø 88.9x1500 mm (2"3/8api R.) (60 m)Down-the-hole hammer 5" (approx. 125 mm) Drill tip for down-the-hole-hammer This description is for guidance only. You cannot order this product online. The ordering process triggers only one request.
JOY-1-GEO - self-propelled drill
These units are built with small dimensions but for high operating performance and are particularly suitable for use in confined spaces and for all types of soil. The machine can be equipped with radio control. Hydraulic drilling machine JOY-1-GEO Light series drilling machine for making vertical or inclined holes. Different types of operating heads can be mounted on the machine to carry out different drilling techniques: With Auger By rotopercussion hammersDrilling with air Down-the-hole hammer drilling All drilling machines can be equipped with a removable hydraulic center, so that safe work is possible in closed or dangerous spaces. The use of these drilling units is particularly suitable for all companies, as they are compact and easy to transport even with medium-sized vehicles. The machine is particularly suitable for the following work, both indoors and outdoors: Foundation excavations Minipiles Tie rods Test drilling small fountain / wells Equipped with: Tracked chassis with hydraulic motors and negative safety brake Support frame complete with hydraulic supports with articulated plates and shut-off valves for machine positioning, hydraulic cylinders with articulated connections for inclination of the derrick Hydraulic unit with quiet diesel engine approx. 29 KW, exhaust class STAGE V, triple pump, electrovalves, oil tank complete with filter, filler cap, drain, sight level Fuel tank with filler cap, drain and level 6 lever valves to control the working position of the machine 8 lever valves to control the drill head and the clamp Height adjustment for raising / lowering the mast, stroke 500mm Electrical system with command center, safety switch, rotating beacon and headlights for the work areaTechnical specifications Substructure Length: 1420 mm Width: 1000 mm Sliding jaws: 230 mm Rolls: 3 + 3 Stabilizers: 4-3 Engine Output: approx. 35 hp Sound insulation: 80 dB Drilling slide Length depending on: 1250/1750/2250/35050 mm Thrust: 2000 kg Train: 2000 kg Vertical carriage right left / right: 15 ° / 15 ° hydraulic or 90 ° / 90 ° hydraulic and mechanical Counter slide: +500 mm Double clamping jaws with unscrewing device: MD135 Øi 250 mm / MD205 Øi 200 Rotation Minimum / maximum torque: variable / variable 3432 - 5883 Nm Weight With minimum equipment: 1450 kg Optional accessories: Carriage SL-200, hub 1250 mm Tried the carriage by 500 mm Tried the carriage by 1000 mm Tried the carriage by 2000 mm Double clamp with screw-on function Ø 135 mm Double clamp with screw-on function Ø 205 mm TR-22 drill head with hollow shaft and hammer THOR-18Rotation: 60 l / min. at 180 bar, 280 rpm, 980 Nm Impact: 25 l / min. at 180 bar, 1600 min-1 TR-150 drill head with hollow shaft and hammer THOR-62 Rotation: 80 l / min. at 180 bar, 320 min-1, 1570 Nm Impact: 30 l / min. at 180 bar, 1600 min-1 TR-350 drill head with hollow shaft, swivel joint Rotation: 90 l / min. at 180 bar, 280 min & supmin; ¹, 3432 Nm TR-600 drill head with hollow shaft, swivel joint Rotation: 90 l / min at 180 bar, 240 min-1, 5883 Nm TR-600-V high-speed drill head for stony ground Water / air connection head 2 "low pressure (20 bar) remote control Screw pump 150 l / min. at 30 bar 900 kg winch with 25 meters of rope Turntable for carriage 90 ° right / 90 ° left Turntable for carriage 15 ° right / 15 ° leftThis description is for guidance only. You cannot order this product online. The order process only triggers a request.
JOY-2-GEO - self-propelled drill
These units are built with small dimensions but for high operating performance and are particularly suitable for use in confined spaces and for all types of soil. The machine can be equipped with radio control. Hydraulic drilling machine JOY-1-GEO Light series drilling machine for making vertical or inclined holes. Different types of operating heads can be mounted on the machine to carry out different drilling techniques: With Auger By rotopercussion hammersDrilling with air Down-the-hole hammer drilling All drilling machines can be equipped with a removable hydraulic center, so that safe work is possible in closed or dangerous spaces. The use of these drilling units is particularly suitable for all companies, as they are compact and easy to transport even with medium-sized vehicles. The machine is particularly suitable for the following work, both indoors and outdoors: Foundation excavations Minipiles Tie rods Test drilling small fountain / wells Equipped with: Tracked chassis with hydraulic motors and negative safety brake Support frame complete with hydraulic supports with articulated plates and shut-off valves for machine positioning, hydraulic cylinders with articulated connections for inclination of the derrick Hydraulic unit with quiet diesel engine approx. 29 KW, exhaust class STAGE V, triple pump, electrovalves, oil tank complete with filter, filler cap, drain, sight level Fuel tank with filler cap, drain and level 6 lever valves to control the working position of the machine 8 lever valves to control the drill head and the clamp Height adjustment for raising / lowering the mast, stroke 500mm Electrical system with command center, safety switch, rotating beacon and headlights for the work areaTechnical specifications Substructure Length: 1420 mm Width: 1000 mm Sliding jaws: 230 mm Rolls: 3 + 3 Stabilizers: 4-3 Engine Output: approx. 35 hp Sound insulation: 80 dB Drilling slide Length depending on: 1250/1750/2250/35050 mm Thrust: 2000 kg Train: 2000 kg Vertical carriage right left / right: 15 ° / 15 ° hydraulic or 90 ° / 90 ° hydraulic and mechanical Counter slide: +500 mm Double clamping jaws with unscrewing device: MD135 Øi 250 mm / MD205 Øi 200 Rotation Minimum / maximum torque: variable / variable 3432 - 5883 Nm Weight With minimum equipment: 1450 kg Optional accessories: Carriage SL-200, hub 1250 mm Tried the carriage by 500 mm Tried the carriage by 1000 mm Tried the carriage by 2000 mm Double clamp with screw-on function Ø 135 mm Double clamp with screw-on function Ø 205 mm TR-22 drill head with hollow shaft and hammer THOR-18Rotation: 60 l / min. at 180 bar, 280 rpm, 980 Nm Impact: 25 l / min. at 180 bar, 1600 min-1 TR-150 drill head with hollow shaft and hammer THOR-62 Rotation: 80 l / min. at 180 bar, 320 min-1, 1570 Nm Impact: 30 l / min. at 180 bar, 1600 min-1 TR-350 drill head with hollow shaft, swivel joint Rotation: 90 l / min. at 180 bar, 280 min & supmin; ¹, 3432 Nm TR-600 drill head with hollow shaft, swivel joint Rotation: 90 l / min at 180 bar, 240 min-1, 5883 Nm TR-600-V high-speed drill head for stony ground Water / air connection head 2 "low pressure (20 bar) remote control Screw pump 150 l / min. at 30 bar 900 kg winch with 25 meters of rope Turntable for carriage 90 ° right / 90 ° left Turntable for carriage 15 ° right / 15 ° leftThis description is for guidance only. You cannot order this product online. The order process only triggers a request.
JOY-2-GEO - self-propelled drill
These units are built with small dimensions but for high operating performance and are particularly suitable for use in confined spaces and for all types of soil. The machine can be equipped with radio control. Hydraulic drilling machine JOY-1-GEO Light series drilling machine for making vertical or inclined holes. Different types of operating heads can be mounted on the machine to carry out different drilling techniques: With Auger By rotopercussion hammersDrilling with air Down-the-hole hammer drilling All drilling machines can be equipped with a removable hydraulic center, so that safe work is possible in closed or dangerous spaces. The use of these drilling units is particularly suitable for all companies, as they are compact and easy to transport even with medium-sized vehicles. The machine is particularly suitable for the following work, both indoors and outdoors: Foundation excavations Minipiles Tie rods Test drilling small fountain / wells Equipped with: Tracked chassis with hydraulic motors and negative safety brake Support frame complete with hydraulic supports with articulated plates and shut-off valves for machine positioning, hydraulic cylinders with articulated connections for inclination of the derrick Hydraulic unit with quiet diesel engine approx. 29 KW, exhaust class STAGE V, triple pump, electrovalves, oil tank complete with filter, filler cap, drain, sight level Fuel tank with filler cap, drain and level 6 lever valves to control the working position of the machine 8 lever valves to control the drill head and the clamp Height adjustment for raising / lowering the mast, stroke 500mm Electrical system with command center, safety switch, rotating beacon and headlights for the work areaTechnical specifications Substructure Length: 1420 mm Width: 1000 mm Sliding jaws: 230 mm Rolls: 3 + 3 Stabilizers: 4-3 Engine Output: approx. 35 hp Sound insulation: 80 dB Drilling slide Length depending on: 1250/1750/2250/35050 mm Thrust: 2000 kg Train: 2000 kg Vertical carriage right left / right: 15 ° / 15 ° hydraulic or 90 ° / 90 ° hydraulic and mechanical Counter slide: +500 mm Double clamping jaws with unscrewing device: MD135 Øi 250 mm / MD205 Øi 200 Rotation Minimum / maximum torque: variable / variable 3432 - 5883 Nm Weight With minimum equipment: 1450 kg Optional accessories: Carriage SL-200, hub 1250 mm Tried the carriage by 500 mm Tried the carriage by 1000 mm Tried the carriage by 2000 mm Double clamp with screw-on function Ø 135 mm Double clamp with screw-on function Ø 205 mm TR-22 drill head with hollow shaft and hammer THOR-18Rotation: 60 l / min. at 180 bar, 280 rpm, 980 Nm Impact: 25 l / min. at 180 bar, 1600 min-1 TR-150 drill head with hollow shaft and hammer THOR-62 Rotation: 80 l / min. at 180 bar, 320 min-1, 1570 Nm Impact: 30 l / min. at 180 bar, 1600 min-1 TR-350 drill head with hollow shaft, swivel joint Rotation: 90 l / min. at 180 bar, 280 min & supmin; ¹, 3432 Nm TR-600 drill head with hollow shaft, swivel joint Rotation: 90 l / min at 180 bar, 240 min-1, 5883 Nm TR-600-V high-speed drill head for stony ground Water / air connection head 2 "low pressure (20 bar) remote control Screw pump 150 l / min. at 30 bar 900 kg winch with 25 meters of rope Turntable for carriage 90 ° right / 90 ° left Turntable for carriage 15 ° right / 15 ° leftThis description is for guidance only. You cannot order this product online. The order process only triggers a request.
Our self-propelled drilling rigs with movable drilling mounts are suitable for vertical and inclined drilling up to horizontal drilling.
Different types of operating heads can be mounted on the machine to carry out different drilling techniques:
- Rotary drilling
- Hammer drilling
- Drilling with air
- Down-the-hole hammer drilling