Stand punching for sheets t

Universal 3-in-1 tool for punching terminal boxes, mounting plates, and switch cabinet doors. Practically ideal for punching terminal boxes, housings, cable entry plates, and switch cabinet doors made of sheet steel or stainless steel up to 1000 x 2000 mm.Punching bow outreach: 510 mm For use of round punches, square punches, rectangular punches, and special punches Punching bow made of stress-relieved solid material, including rack drive Hand lever operation Easy and quick tool changing For in-line punching and small series Nibbling up to 46,0 x 46,0 mmTechnical dataWeight:   110 kg Dimension (without support) 750 x 150 x 500 mm extension of the bracket:   510 mmMaximum steel sheet thickness: Steel (ST37):   max. 2,0 mm Stainless steel:   max. 1,5 mm (according to punch size) Plastics, polyester plastic:   max. 4,0 mm (according to punch size)The following tools can be applied:Round tools:   Ø 4,2 mm up to Ø 60,0 mm Square tools:   22,2 x 22,2 mm up to 46,0 x 46,0 mm Cutting tools:   20,0 x 3,0 mm, 30,0 x 5,0 mm, 60,0 x 5,0 mmSUB-MIN-D-punches:   9 pin up to 37 pin Special punches:   e.g. Ø 22,5 mm with 4 anti twist protection notches 3,2 mm

Universal 3-in-1 tool for punching terminal boxes, mounting plates, and switch cabinet doors Practically ideal for punching terminal boxes, housings, cable entry plates, and switch cabinet doors made of mild steel or stainless steel up to 1000 x 2000 mmPunching bow outreach: 510 mm for use of round punches, square punches, rectangular punches, and special punches Punching bow made of stress-relieved solid material, including hydraulic unit foot switch operation Easy and quick tool changing For in-line punching and small series Nibbling up to 46,0 x 46,0 mmMaximum steel sheet thickness: Steel (ST37):   max. 2,0 mm Stainless steel:   max. 2,0 mm (according to punch size) Plastics, polyester plastic:   max. 4,0 mm (according to punch sizeThe following tools can be applied:Round tools:   Ø 4,2 mm up to Ø 89,0 mm Square tools:   22,2 x 22,2 mm up to 92,0 x 92,0 mm Rectangular tools:   22,0 x 30,0 mm up to 29,0 x 71,0 mm Cutting tools:   20,0 x 3,0 mm, 30,0 x 5,0 mm, 60,0 x 5,0 mm, 80,0 x 5,0 mm, 100,0 x 5,0 mmSUB-MIN-D-punches:   9 pin up to 37 pin Special punches:   Round 11,2 mm | 16,2 mm | 22,5 mm with 4 anti twist protection notches 3,2 mm

User-friendly punching machine for control cabinet and switchgear construction.The 800 mm throat allows processing of sheet metal plates and control cabinet  doors of up to 1000 x 2000 mm with a beveling height of up to 40 mm. Smaller doors of 600–1000 mm can be punched near the edge without being turned over. Fast and easy die change with anti-twist protection, even while the door is clamped in place. Nibbling is possible up to 46 x 46 mm Description Stress-relieved, robust C-frame punch unit, firmly mounted to a sturdy base. The super quiet dual-circuit hydraulic unit and the control system are safely installed in the base. Double-acting hydraulic cylinder with integrated laser pointer. The punching waste falls into a drawer integrated in the punch unit. A die drawer with an extension length of 400 mm for storing unused dies is integrated in the base. The punching machine is operated via a modern touchscreen terminal that is fastened to an ergonomic lifting and pivot arm. The stop system (X/Y axis) is easy to adjust and can be locked in place with a button at the control terminal once the punching position is reached. Exact digital display of the measured displacement from the X and Y axis. Punching is activated via two-hand control at the control terminal. Once punching is complete, the die is returned to its original position with the button “Raise die”. The button must be held down until the die has completed its upward travel. Only then is the brake released. Maximum material thickness: Steel (S235):   max. 3,0 mmStainless steel (1.400-V2A):   max. 2,0 mm Aluminum (not anodized):   max. 3,5 mm Aluminum (anodized on one side):   max. 3,0 mm Aluminum (anodized on both sides):   max. 2,5 mmStandard punches selectionRound punches:   from 3,2 mm to 120 mm Square punches:   from 12,7 x 12,7 mm to 124 x 124 mm Rectangular punches:   from 20 x 21 mm to 19 x 120 mm Special-shape punches:   Round punches with anti-twist nib etc. Special punches Please aquire.

Ständerlochstanzen für die Herstellung von Löchern in Boden- oder Seitenteile von Gehäusen, Platten, Deckeln verwendet werden.Es gibt vier Baugrößen mit einer Ausladung von 350 bis 900 mm.Es gibt verschiedene Elektrohydraulikaggregate für die Stanzen.Einstellbarer Hub verkürzt die Arbeitszeit.