PTO-ROAD - Oil spill clean-up devices

The KWF WATER HBW200 hydraulic high-pressure cleaner from FEP is the perfect solution for mobile use on commercial vehicles and vans up to 7.5 tonnes. The powerful high-pressure cleaner pump with hydraulic motor delivers a water flow rate of 25 litres per minute at a pressure of 150 BAR. As it is driven directly by the vehicle engine, no harmful exhaust fumes are emitted from the unit, which means it can also be operated safely in the cargo area. The KWF WATER HBW200 requires a hydraulic supply of 20-40 litres at 200 bar and is equipped with a pressure gauge and a pressure relief valve. The system is optionally available with a 90-litre water tank. It is conveniently operated via a washing lance with high and low pressure nozzles, connected to an automatic hose reel and 18 metres of hose. The compact dimensions of 445 x 720 x 500 mm (height) facilitate integration into existing vehicle superstructures. Discover all applications for hydraulic systems in commercial vehicles on our overview page Hydraulics for commercial vehicles and vans up to 7.5 tonnes! High-pressure cleaner pump with hydraulic motor with a water flow rate of 25 litres per minute and a pressure of 150 BAR.Driven by the vehicle engine, no harmful exhaust fumes are emitted from the unit, enabling safe operation in the cargo area.FeaturesHydraulic requirement: 20-40 litres at 200 barPressure gauge and pressure relief valveAvailable with 90 litre water tankWash lance with high and low pressure nozzle, on a hose reel with automatic spring reel with hose length 18 metresDimensions 445 x 720 H. 500 mm

The ROAD CLEANER RC-H is the compact solution for oil spill removal in vans such as the VW T6.1, VW Crafter FWD or FIAT Ducato, which do not have a power take-off (PTO). The drive via the vehicle engine produces no harmful exhaust fumes, which enables safe operation in the cargo area. The system combines a high-pressure cleaner and a vacuum cleaner, with the extracted liquid being collected in a stainless steel container. The hydraulics require 15 litres at 180 bar and are protected by a high-performance cooling system. Other safety features include a thermal circuit breaker, oil level monitor, pressure relief valve and emergency stop switch. The unit is operated via the 12-volt on-board power supply. A 300-litre stainless steel water tank, a 5-litre detergent tank, a washing lance, a hydraulic vacuum cleaner with a suction height of 3 metres and a hose reel with 10 metres of suction hose are already integrated. The system is approved for ATEX-1 and ATEX-21 zones and is ideal for use in potentially explosive atmospheres. You can find more information about the manufacturer here: FEP at KW Hydraulik. Application example: Hydraulics for commercial vehicles & vans up to 7.5 tonnes. This model can be installed in vans that do not have a transmission with power take-off (PTO).VW-T6.1, VW Crafter FWD, FIAT Ducato, ....Driven by the vehicle engine, no harmful exhaust fumes are produced at the unit, which enables safe operation in the cargo area.The hydraulics drive either the high-pressure cleaner or the vacuum cleaner.The extracted liquid is collected in a stainless steel container.The unit can be used in ATEX-1 and ATEX-21 hazardous areas.FeaturesHydraulics: 15 litres at 180 barHydraulic system with high-performance cooling.Thermal protection switch, oil level monitoringPressure gauge and pressure relief valveControl unit with operating hours counterEmergency stop switch (disconnects the system from the drive)12 volt on-board voltage for system control300 litre stainless steel water tank with water separatorTank for cleaning additive 5 litres with proportion regulatorBrush for vacuum cleanerWash lance with high and low pressure nozzleHydraulic vacuum cleanerSuction height 3 metresHose reel with spring return for suction hose, 10 metres, hose diameter 38 mm40 litre tank for holding the oil-water mixture, switch-off when tank is fullApproval for ATEX-1 and ATEX-21 areasDimensions: 1400x1100xH1250mm Model ROAD CLEANER RC-HC with additional gas-powered water heater.

The ROAD CLEANER RC-H2 is the professional solution for oil spill removal in vehicles with a power take-off (PTO) such as the VW Crafter, MAN TGE, Mercedes Sprinter, IVECO Daily or Renault Master. It is driven by the vehicle engine - no harmful exhaust fumes are produced, which enables safe operation in the load compartment. Thanks to the simultaneous use of a high-pressure cleaner and vacuum cleaner, water consumption is reduced and cleaning is faster and more environmentally friendly. The extracted liquid is collected in a stainless steel tank. The system fulfils the requirements for ATEX-1 and ATEX-21 zones. Technical features: Hydraulic requirement 15 l/min at 180 bar, high-performance cooling, emergency stop switch, operating hours counter, 300-litre water tank, 10 m suction hose and 40-litre collection tank with automatic shut-off. You can find more information about the manufacturer here: FEP at KW Hydraulik. Area of application: Hydraulics for commercial vehicles & vans up to 7.5 tonnes. This model is for installation in vehicles with transmission power take-off (PTO).VW CRAFTER / MAN TGEMERCEDES SPRINTERIVECO DAILYRENAULT MASTER / OPEL MOVANO / NISSAN NV400Driven by the vehicle engine, no harmful exhaust gases are produced at the unit, which enables safe operation in the load compartment.With this drive variant, the high-pressure cleaner can be operated simultaneously with the vacuum cleaner.This method requires less water, the work is faster and is more environmentally friendly.The extracted liquid is collected in a stainless steel container.The unit can be used in ATEX-1 and ATEX-21 hazardous areas.FeaturesHydraulics: 15 litres at 180 barHydraulic system with high-performance cooling.Thermal protection switch, oil level monitoringPressure gauge and pressure relief valveControl unit with operating hours counterEmergency stop switch (disconnects the system from the drive)12 volt on-board voltage for system control300 litre stainless steel water tank with water separatorTank for cleaning additive 5 litres with proportion regulatorBrush for vacuum cleanerWash lance with high and low pressure nozzleHydraulic vacuum cleanerSuction height 3 metresHose reel with spring return for suction hose, 10 metres, hose diameter 38 mm40 litre tank for holding the oil-water mixture, switch-off when tank is fullApproval for ATEX-1 and ATEX-21 areas Model ROAD CLEANER RC-H2C with additional gas-powered water heater.

The ROAD CLEANER RC-H2C combines a high-pressure cleaner, a hydraulic vacuum cleaner and an additional gas-powered water heater for efficient use in vehicles with a power take-off (PTO), such as the VW Crafter, MAN TGE, Mercedes Sprinter, IVECO Daily or Renault Master. It is operated via the vehicle engine so that no harmful exhaust fumes are emitted from the unit - ideal for safe use in the cargo area. Thanks to the option of operating cleaning and extraction at the same time, water consumption is minimised and working time is reduced. The extracted liquid is collected in a robust stainless steel tank. The ROAD CLEANER RC-H2C is also approved for use in potentially explosive atmospheres (ATEX-1 and ATEX-21). Technical highlights: Hydraulic requirement 15 l/min at 180 bar, high-performance cooling, operating hours counter, emergency stop switch, 300-litre water tank, suction hose with a length of 10 m and a 40-litre collection tank with fill level cut-off. You can find more information about the manufacturer here: FEP at KW Hydraulik. Area of application: Hydraulics for commercial vehicles & vans up to 7.5 tonnes. This model is for installation in vehicles with transmission power take-off (PTO):VW CRAFTER / MAN TGEMERCEDES SPRINTERIVECO DAILYRENAULT MASTER / OPEL MOVANO / NISSAN NV400Driven by the vehicle engine, no harmful exhaust gases are produced at the unit, which enables safe operation in the load compartment.With this drive variant, the high-pressure cleaner can be operated simultaneously with the vacuum cleaner.This method requires less water, the work is faster and is more environmentally friendly.The extracted liquid is collected in a stainless steel container.The unit can be used in ATEX-1 and ATEX-21 hazardous areas.FeaturesHydraulics: 15 litres at 180 barHydraulic system with high-performance cooling.Thermal protection switch, oil level monitoringPressure gauge and pressure relief valveControl unit with operating hours counterEmergency stop switch (disconnects the system from the drive)12 volt on-board voltage for system control300 litre stainless steel water tank with water separatorTank for cleaning additive 5 litres with proportion regulatorBrush for vacuum cleanerWash lance with high and low pressure nozzleHydraulic vacuum cleanerSuction height 3 metresHose reel with spring return for suction hose, 10 metres, hose diameter 38 mm40 litre tank for holding the oil-water mixture, switch-off when tank is fullApproval for ATEX-1 and ATEX-21 areas Model ROAD CLEANER RC-H2C with additional gas-powered water heater.

The ROAD CLEANER RC-HC is a versatile high-pressure cleaner with vacuum cleaner and gas-powered water heater for installation in vans without a power take-off (PTO) such as the VW T6.1, VW Crafter FWD or FIAT Ducato. It is driven by the vehicle engine - this means that no harmful exhaust gases are produced, which enables safe operation in the load compartment. The hydraulics drive either the high-pressure cleaner or the vacuum cleaner. The integrated hot water flow heater makes cleaning faster and more efficient, even in cold temperatures. Liquids are reliably collected in a stainless steel tank. The system is also approved for use in ATEX-1 and ATEX-21 areas. Technical details: Hydraulic requirement 15 l/min at 180 bar, high-performance cooling, 300-litre water tank, 10 m suction hose and 40-litre collection tank with automatic shut-off. Find out more about the manufacturer here: FEP at KW Hydraulik. You can find suitable applications here: Hydraulics for commercial vehicles & vans up to 7.5 tonnes. This model can be installed in vans that do not have a transmission with power take-off (PTO).VW-T6.1, VW Crafter FWD, FIAT Ducato, ....Driven by the vehicle engine, no harmful exhaust fumes are produced at the unit, which enables safe operation in the cargo area.The hydraulics drive either the high-pressure cleaner or the vacuum cleaner.This version has an additional gas-fuelled instantaneous water heater. Hot water enables use in cold outside temperatures and removes dirt better.The extracted liquid is collected in a stainless steel container.The unit can be used in ATEX-1 and ATEX-21 hazardous areas.FeaturesHydraulics: 15 litres at 180 barHydraulic system with high-performance cooling.Thermal protection switch, oil level monitoringPressure gauge and pressure relief valveControl unit with operating hours counterEmergency stop switch (disconnects the system from the drive)12 volt on-board voltage for system control300 litre stainless steel water tank with water separatorTank for cleaning additive 5 litres with proportion regulatorBrush for vacuum cleanerWash lance with high and low pressure nozzleHydraulic vacuum cleanerSuction height 3 metresHose reel with spring return for suction hose, 10 metres, hose diameter 38 mm40 litre tank for holding the oil-water mixture, switch-off when tank is fullApproval for ATEX-1 and ATEX-21 areasDimensions: 1400x1100xH1250mm Model ROAD CLEANER RC-HC with additional gas-powered water heater.

The ROAD CLEANER RC-M module is the flexible solution for oil spill removal on vehicles with a loading area or trailer. It is simply attached and is immediately ready for use - also ideal for small vans or trailers. The integrated petrol engine with electric starter drives a hydraulic pump that supplies either the high-pressure cleaner or the vacuum cleaner. The extracted liquid is safely collected in a stainless steel tank. The system is approved for use in potentially explosive atmospheres (ATEX-1 and ATEX-21) and has a 300 litre water tank, oil cooler, 18 metres of high-pressure hose and 10 metres of suction hose. You can find out more about the manufacturer here: FEP at KW Hydraulik. Applications for this module can be found here: Hydraulics for commercial vehicles & vans up to 7.5 tonnes. This module can be used perfectly on vehicles with a loading area or on trailers.It is mounted on the cargo bed as required and can be used immediately.Even the smallest vehicles and even trailers can be used for transport.The integrated motor is started with an electric starter . This drives a hydraulic pump, which in turn alternately drivesa high-pressure cleaner and a vacuum cleaner.The extracted liquid is collected in a stainless steel container.The unit can be used in ATEX-1 and ATEX-21 hazardous areas.FeaturesPetrol engine with electric starter (supplied without battery and prepared for connection to the vehicle electrical system)Hydraulics: 15 litres at 180 barHydraulic system with 10 litre hydraulic tank, oil cooler300 litre stainless steel water tank with water separatorTank for cleaning additive 5 litres with proportion regulatorHose reel with spring return for high-pressure hose, 18 metresWash lance with high and low pressure nozzleHydraulic vacuum cleanerSuction height 3 metresHose reel with spring return for suction hose, 10 metres, hose diameter 38 mmBrush for vacuum cleaner40 litre tank for holding the oil-water mixture, switch-off when tank is fullApproval for ATEX-1 and ATEX-21 areasDimensions: 1400x1100xH1250mmModel ROAD CLEANER RC-MC with additional gas-powered water heater.

The ROAD CLEANER RC-M-ST is the particularly compact version for oil spill removal on vehicles with loading areas or trailers. Thanks to the modular design consisting of three separate components (high-pressure cleaner, water tank and drive unit), the system can be installed in a particularly space-saving manner. The integrated petrol engine with electric starter drives a hydraulic pump that supplies either the high-pressure cleaner or the vacuum cleaner. The extracted liquid is collected in a stainless steel tank. With a tare weight of just 335 kg, this model is perfect for small vans and trailers. The system is approved for use in ATEX-1 and ATEX-21 areas and offers a 120-litre polyethylene water tank solution, an 18-metre high-pressure hose reel and a 10-metre suction reel. Find out more about the manufacturer here: FEP at KW Hydraulik. Find out more about suitable applications here: Hydraulics for commercial vehicles & vans up to 7.5 tonnes. Particularly compact design of the ROAD CLEANER unit. The three components - high-pressure cleaner, water tank and drive unit - are separate and can be accommodated to save space.This module can be used perfectly on vehicles with a loading area or on trailers.It is mounted on the cargo bed as required and can be used immediately.Even the smallest vehicles and even trailers can be used for transport.The integrated motor is started with an electric starter . This drives a hydraulic pump, which in turn alternately drivesa high-pressure cleaner and a vacuum cleaner.The extracted liquid is collected in a stainless steel container.The unit can be used in ATEX-1 and ATEX-21 hazardous areas.FeaturesStructure with three elements, modular according to the available spaceDead weight 335 kgPetrol engine with electric starter (supplied without battery and prepared for connection to the vehicle electrical system)Hydraulics: 15 litres at 180 barHydraulic system with 10 litre hydraulic tank, oil cooler120 litre polyethylene water tankTank for cleaning additive 5 litres with proportion regulatorHose reel with spring return for high-pressure hose, 18 metresWash lance with high and low pressure nozzleHydraulic vacuum suction cupSuction height 3 metresHose reel with spring return for suction hose, 10 metres, hose diameter 38 mmBrush for vacuum cleaner40 litre tank for holding the oil-water mixture, switch-off when tank is fullApproval for ATEX-1 and ATEX-21 areasModel ROAD CLEANER RC-M STC with additional gas-powered water heater.

The ROAD CLEANER RC-MC is the mobile solution for removing oil spillages from vehicles with loading platforms or trailers. Thanks to its compact design, the system can be flexibly installed and used immediately. The integrated petrol engine with electric starter drives a hydraulic pump, which operates either the high-pressure cleaner or the vacuum cleaner. A special highlight of this version is the additional gas-powered water heater, which makes it easier to use in cold temperatures and enables more effective cleaning. The extracted liquid is safely collected in a stainless steel tank. Thanks to its approval for ATEX-1 and ATEX-21 areas, the ROAD CLEANER RC-MC is also suitable for use in potentially explosive environments. The equipment includes a 300-litre stainless steel water tank, an 18-metre high-pressure hose and a 10-metre suction hose with spring return. Find out more about the manufacturer here: FEP at KW Hydraulik. Suitable applications can be found here: Hydraulics for commercial vehicles & vans up to 7.5 tonnes. This module can be used perfectly on vehicles with a loading area or on trailers.It is mounted on the cargo bed as required and can be used immediately.Even the smallest vehicles and even trailers can be used for transport.The integrated motor is started with an electric starter . This drives a hydraulic pump, which in turn alternately drivesa high-pressure cleaner and a vacuum cleaner.This version has an additional gas-fuelled instantaneous water heater. Hot water enables use in cold outside temperatures and removes dirt better.The extracted liquid is collected in a stainless steel container.The unit can be used in ATEX-1 and ATEX-21 hazardous areas.FeaturesPetrol engine with electric starter (supplied without battery and prepared for connection to the vehicle electrical system)Hydraulics: 15 litres at 180 barHydraulic system with 10 litre hydraulic tank, oil cooler300 litre stainless steel water tank with water separatorTank for cleaning additive 5 litres with proportion regulatorHose reel with spring return for high-pressure hose, 18 metresWash lance with high and low pressure nozzleHydraulic vacuum cleanerSuction height 3 metresHose reel with spring return for suction hose, 10 metres, hose diameter 38 mmBrush for vacuum cleaner40 litre tank for holding the oil-water mixture, switch-off when tank is fullApproval for ATEX-1 and ATEX-21 areasDimensions: 1400x1100xH1250mmModel ROAD CLEANER RC-MC with additional gas-powered water heater.

The ROAD CLEANER RC-SC offers a particularly flexible solution for oil spill removal in vehicles with limited space. Unlike other models, this system is not mounted on a central carrier frame. The three-part design saves weight and enables space-saving integration. The integrated petrol engine with electric starter drives a hydraulic pump that supplies either the high-pressure cleaner or the vacuum cleaner. A 120-litre polyethylene water tank and a separate tank for cleaning additive ensure efficient work. The separated liquid is safely collected in a 40-litre stainless steel tank. The unit is approved for use in ATEX-1 and ATEX-21 areas and is therefore also suitable for potentially explosive environments. More details about the manufacturer can be found here: FEP at KW Hydraulik. Further areas of application can be found here: Hydraulics for commercial vehicles & vans up to 7.5 tonnes. This three-part model is not mounted on a central carrier frame. Due to its weight saving and flexibility, it is particularly suitable for installation in vehicles with limited space.The extracted liquid is collected in a stainless steel container.The unit can be used in ATEX-1 and ATEX-21 hazardous areas.FeaturesCleaning unit consisting of three parts, total weight 335 kgPetrol engine with electric starter (supplied without battery and prepared for connection to the vehicle electrical system)Hydraulics: 15 litres at 180 barHydraulic system with 10 litre hydraulic tank, oil cooler120 litre polyethylene water tank with water separatorTank for cleaning additive 5 litres with proportion regulatorHose reel with spring return for high-pressure hose, 18 metresWash lance with high and low pressure nozzleHydraulic vacuum cleanerSuction height 3 metresHose reel with spring return for suction hose, 10 metres, hose diameter 38 mmBrush for vacuum cleaner40 litre tank for holding the oil-water mixture, switch-off when tank is fullApproval for ATEX-1 and ATEX-21 areas Model ROAD CLEANER RC-SCC with additional gas-powered water heater.