PTO - ENERGY MOBIL - Auxiliary drive for vans

for Mercedes Sprinter- from year of construction 2021- with front-wheel drive (FWD)- with manual gearbox- No power take-off on the transmission (PTO) is required- the system can be retrofitted to existing vehiclesPower generator- 230 Volt / 5 kVA / 16 A / CEE socket blue or SCHUKO- 400 Volt / 10 kVA / 16 A / CEE socket redCompressed air compressor650 l/min at 10 barAccumulator 25 litresMaintenance unit: pressure reducer, lubricator, water separatorSupplied without compressed air hoses and connectionsElectrode welding unit 300 AmpED100% = 150 Amp | ED60% = 200 Amp | ED30% = 300 Amp- Connection for welding cable plug SK 35/50 mandrel Ø13mm- Connection for cable remote control- Potentiometer welding current- Potentiometer arc Force- Welding overload alarm- Welding / battery Jumpstart Selector- Supplied without welding cable and cable remote controlHydraulic connection for external hydraulic tools- 30 l/min at 140 bar- FlatFace couplingsHYDRO power packs provide mobile power for your service and workshop vehicle. Installation kit in vehicles with front-wheel drive.The engine of your vehicle serves as a drive for a hydraulic pump. The energy generated in this way can drive our generator anywhere in the vehicle, which supplies electricity at a constant frequency.Scope of delivery:Hydraulic pump with magnetic coupling, bracket, beltPower generator unit with hydraulic tank, oil cooling, filterControl unit with vehicle-specific cables and adapters Price includes installation.The vehicle must be delivered to and collected from us for installation in your vehicle. These transfer costs are not included in the price.

for Mercedes Sprinter- from year of construction 2021- with front-wheel drive (FWD)- with manual or automatic transmission- No power take-off on the transmission (PTO) is required- the system can be retrofitted to existing vehiclesPower generator- 230 Volt / 5 kVA / 16 A / CEE socket blue or SCHUKO- 400 Volt / 10 kVA / 16 A / CEE socket redCompressed air compressor650 l/min at 10 barAccumulator 25 litresMaintenance unit: pressure reducer, lubricator, water separatorSupplied without compressed air hoses and connectionsElectrode welding unit 300 AmpED100% = 150 Amp | ED60% = 200 Amp | ED30% = 300 Amp- Connection for welding cable plug SK 35/50 mandrel Ø13mm- Connection for cable remote control- Potentiometer welding current- Potentiometer arc Force- Welding overload alarm- Welding / battery Jumpstart Selector- Supplied without welding cable and cable remote controlHydraulic connection for external hydraulic tools- 30 l/min at 140 bar- FlatFace couplingsHYDRO power packs provide mobile power for your service and workshop vehicle. Installation kit in vehicles with front-wheel drive.The engine of your vehicle serves as a drive for a hydraulic pump. The energy generated in this way can drive our generator anywhere in the vehicle, which supplies electricity at a constant frequency.Scope of delivery:Hydraulic pump with magnetic coupling, bracket, beltPower generator unit with hydraulic tank, oil cooling, filterControl unit with vehicle-specific cables and adapters Price includes installation.The vehicle must be delivered to and collected from us for installation in your vehicle. These transfer costs are not included in the price.

for VW CRAFTER / MAN TGE- from model year 2017- with front-wheel drive (FWD)- with manual gearbox- No power take-off on the gearbox (PTO) is required- the system can be retrofitted to existing vehiclesPower generator- 230 Volt / 5 kVA / 16 A / CEE socket blue or SCHUKO- 400 Volt / 10 kVA / 16 A / CEE socket redCompressed air compressor650 l/min at 10 barAccumulator 25 litresMaintenance unit: pressure reducer, lubricator, water separatorSupplied without compressed air hoses and connectionsElectrode welding unit 300 AmpED100% = 150 Amp | ED60% = 200 Amp | ED30% = 300 Amp- Connection for welding cable plug SK 35/50 mandrel Ø13mm- Connection for cable remote control- Potentiometer welding current- Potentiometer arc Force- Welding overload alarm- Welding / battery Jumpstart Selector- Supplied without welding cable and cable remote controlHydraulic connection for external hydraulic tools- 30 l/min at 140 bar- FlatFace couplingsHYDRO power packs provide mobile power for your service and workshop vehicle. Installation kit in vehicles with front-wheel drive.The engine of your vehicle serves as a drive for a hydraulic pump. The energy generated in this way can drive our generator anywhere in the vehicle, which supplies electricity at a constant frequency.Scope of delivery:Hydraulic pump with magnetic coupling, bracket, beltPower generator unit with hydraulic tank, oil cooling, filterControl unit with vehicle-specific cables and adapters Price includes installation.The vehicle must be delivered to and collected from us for installation in your vehicle. These transfer costs are not included in the price.

for VW CRAFTER / MAN TGE- from model year 2017- with rear-wheel drive (RWD)- with manual gearbox- No power take-off on the gearbox (PTO) is required- the system can be retrofitted to existing vehiclesPower generator- 230 Volt / 5 kVA / 16 A / CEE socket blue or SCHUKO- 400 Volt / 10 kVA / 16 A / CEE socket redCompressed air compressor650 l/min at 10 barAccumulator 25 litresMaintenance unit: pressure reducer, lubricator, water separatorSupplied without compressed air hoses and connectionsElectrode welding unit 300 AmpED100% = 150 Amp | ED60% = 200 Amp | ED30% = 300 Amp- Connection for welding cable plug SK 35/50 mandrel Ø13mm- Connection for cable remote control- Potentiometer welding current- Potentiometer arc Force- Welding overload alarm- Welding / battery Jumpstart Selector- Supplied without welding cable and cable remote controlHydraulic connection for external hydraulic tools- 30 l/min at 140 bar- FlatFace couplingsHYDRO power packs provide mobile power for your service and workshop vehicle. Installation kit in vehicles with front-wheel drive.The engine of your vehicle serves as a drive for a hydraulic pump. The energy generated in this way can drive our generator anywhere in the vehicle, which supplies electricity at a constant frequency.Scope of delivery:Hydraulic pump with magnetic coupling, bracket, beltPower generator unit with hydraulic tank, oil cooling, filterControl unit with vehicle-specific cables and adapters Price includes installation.The vehicle must be delivered to and collected from us for installation in your vehicle. These transfer costs are not included in the price.

The KWDY system combines a hydraulically driven power generator and a screw compressor (1,300 l/min at 10 bar) for fixed installation in vans with a reinforced power take-off(PTO+, 40 kW), e.g. Mercedes Sprinter, VW Crafter or MAN TGE. It supplies 6.5 kVA of power (400/230 V) and compressed air for demanding applications such as earth rockets or tools on the construction site. The unit is based on proven Dynaset technology and is supplied complete with hydraulic pump, generator, compressor, oil tank, oil cooling system, filter and all vehicle-specific components. Installation included. Further installation solutions for vehicles with power take-off can be found here. Note: Oil cooling for the PTO is required on the vehicle. The PTO must be prepared for hydraulic pumps (multi-tooth shaft). Screw compressor with 1300 l/min. at 10 bar (e.g. for ground rockets)Power generator 6.5 kVA (400/230 volts)System for installation in vehicles with reinforced power take-off (40 kW), e.g. VW CRAFTER, MAN TGE, MERCEDES SPRINTER, with oil cooler for the power take-off* for increased continuous output.The engine of your van serves as the drive for this system.Equipment:230 Volt / 14.2 A / CEE socket blue or SCHUKO400 Volt / 10 kVA / 9.4 A / CEE socket redAir compressor, 1300 l/min. at 10 barScope of delivery:Hydraulic pump with adapter for power take-off*Note: The oil cooling for the power take-off must be ordered from the vehicle manufacturer!Power generator,Air compressorHydraulic oil tank, oil cooling, oil filter,vehicle-specific cables and adaptersPrice includes installation. (hoses, etc.)* The power take-off must be prepared for the connection of a hydraulic pump; multi-tooth shaft.

The KWF COMPACT AIR 650/10 is a pre-assembled hydraulic power unit for permanent installation in service and workshop vehicles, developed by the manufacturer FEP. The system combines power generation (up to 10 kVA) and compressed air supply (650 l/min at max. 10 bar) in a compact frame module.Thanks to the optional auxiliary drive(PTO), the unit is suitable for vehicles with or without PTO preparation. It is driven by the vehicle engine. The 25-litre pressure accumulator, an integrated oil tank with cooling and filter as well as a digital control unit ensure professional continuous operation.Ideal for mobile workshops and customised vehicle conversions.Further installation solutions can be found here.Complete unit in a frame. Delivery only to specialised companies.HYDRO COMPACT AIR 650/10 is a unit for installation in service and workshop vehicles. It can be installed in vehicles with and without an existing PTO power take-off* on the transmission.The engine of your van serves as the drive.Installed in the frame:Power generator 10 kVA, depending on the installation ratio, this generator supplies 5,000 to 8,000 watts (400 volts)230 Volt / 5 kVA / 16 A / CEE socket blue or SCHUKO400 Volt / 10 kVA / 16 A / CEE socket redAir compressor, max. 650 L/min. at max. 10 bar, with 25 litre pressure accumulator, connection BSP1/2" IGHydraulic oil tank, oil cooling, oil filter, control valve, pipeworkControl unit with digital display of the most important functionsSupplied without connection hoses* The power take-off must be prepared for the connection of a hydraulic pump; multi-tooth shaft.

HYDRO COMPACT ELECTRIC - PTO-BELT supplies mobile power for your service and workshop vehicles. It can be fitted to vehicles with front/rear and all-wheel drive without an existing PTO power take-off on the transmission.The engine of your van serves as the drive for the generator, compressor and hydraulic pump.For this purpose, a hydraulic pump is mounted on the alternator belt, which is engaged as required using the magnetic clutch supplied. The hydraulics drive the system. Equipment: 230 Volt / 5 kVA / 16 A / CEE socket blue or SCHUKO400 Volt / 10 kVA / 16 A / CEE socket redScope of delivery:Hydraulic pump with magnetic coupling, bracket, beltPower generator unit with hydraulic tank, oil cooling, filter, Control unit with vehicle-specific cables and adapters Price includes installation.The vehicle must be delivered to and collected from us for installation in your vehicle. These transfer costs are not included.

The HYDRO COMPACT ELECTRIC - PTO-GEAR system from FEP supplies mobile power via the vehicle's power take-off (PTO). The unit is permanently installed and is ideal for workshop, service or tradesman vehicles with rear-wheel drive. Once installed, the hydraulic pump generates power for the generator at a stable frequency - 230 V to 5 kVA or 400 V to 10 kVA, available via CEE or SCHUKO sockets. Included in the scope of delivery: Hydraulic pump with PTO adapter, power generator with tank, oil cooling, filter, control unit and vehicle-specific cabling. Installation at KW Hydraulik, vehicle delivery required. Further installation solutions can be found here. HYDRO COMPACT ELECTRIC - PTO-GEAR supplies mobile power for your service and workshop vehicles.Installation kit in rear-wheel drive vehicles with existing PTO auxiliary drive*.The engine of your vehicle serves as a drive for a hydraulic pump. The energy generated in this way can drive our generator anywhere in the vehicle, which supplies electricity at a constant frequency. Equipment: 230 Volt / 5 kVA / 16 A / CEE socket blue or SCHUKO400 Volt / 10 kVA / 16 A / CEE socket redScope of delivery:Hydraulic pump with adapter for power take-off*Power generator unit with hydraulic tank, oil cooling, filter, Control unit with vehicle-specific cables and adapters Price includes installation.The vehicle must be delivered to and collected from us for installation in your vehicle. These transfer costs are not included.* The power take-off must be prepared for the connection of a hydraulic pump; multi-tooth shaft.

The KWF WATER HBW200 hydraulic high-pressure cleaner from FEP is the perfect solution for mobile use on commercial vehicles and vans up to 7.5 tonnes. The powerful high-pressure cleaner pump with hydraulic motor delivers a water flow rate of 25 litres per minute at a pressure of 150 BAR. As it is driven directly by the vehicle engine, no harmful exhaust fumes are emitted from the unit, which means it can also be operated safely in the cargo area. The KWF WATER HBW200 requires a hydraulic supply of 20-40 litres at 200 bar and is equipped with a pressure gauge and a pressure relief valve. The system is optionally available with a 90-litre water tank. It is conveniently operated via a washing lance with high and low pressure nozzles, connected to an automatic hose reel and 18 metres of hose. The compact dimensions of 445 x 720 x 500 mm (height) facilitate integration into existing vehicle superstructures. Discover all applications for hydraulic systems in commercial vehicles on our overview page Hydraulics for commercial vehicles and vans up to 7.5 tonnes! High-pressure cleaner pump with hydraulic motor with a water flow rate of 25 litres per minute and a pressure of 150 BAR.Driven by the vehicle engine, no harmful exhaust fumes are emitted from the unit, enabling safe operation in the cargo area.FeaturesHydraulic requirement: 20-40 litres at 200 barPressure gauge and pressure relief valveAvailable with 90 litre water tankWash lance with high and low pressure nozzle, on a hose reel with automatic spring reel with hose length 18 metresDimensions 445 x 720 H. 500 mm

The KWF-COMBY - HYDRO COMBY SW-F300 - PTO-GEAR model is a compact, multifunctional unit for service and workshop vehicles with power take-off (PTO) - for example for the VW Crafter (up to model year 2016). The system is driven directly by the vehicle's engine via a hydraulic pump and combines power generation, compressed air supply, welding technology and hydraulic function in a single system. The equipment includes a 230 V output (5 kVA / 16 A / CEE socket blue or Schuko) and a 400 V output (10 kVA / 16 A / CEE socket red). The integrated welding unit supplies up to 300 A welding current, has a connection for SK 35/50 plugs and an interface for a remote control. The air compressor generates 1,000 l/min at 12 bar with a 25 l pressure accumulator (BSP ½" IG connection). The system also offers a hydraulic connection with 20/30 L/min at 140 bar (incl. flat face couplings) for external applications. Installation is included in the price, the vehicle must be delivered to and collected from KW Hydraulik. Compressed air hose, welding cable set and remote control are not included in the scope of delivery. Further solutions for vehicles with power take-off (PTO) can be found here: Installation solutions. Manufacturer: FEP. HYDRO COMBY SW-F300 - PTO-GEAR is a power unit for installation in service and workshop vehicles.It can be installed in vehicles with rear-wheel drive and an existing PTO power take-off* on the transmission.The engine of your van serves as the drive for the generator, compressor and hydraulic pump.Equipment:230 Volt / 5 kVA / 16 A / CEE socket blue or SCHUKO400 Volt / 10 kVA / 16 A / CEE socket red300 ampere electrode welding unit with connection for cable remote controlConnection for welding cable plug SK 35/50 mandrel Ø13mm(Welding cable set and cable remote control not included in scope of delivery)Compressed air compressor, 1000 l/min. at 12 bar, connection BSP 1/2" IGHydraulic connection for external applications, 20/30 L/min. at 140 bar, FLATFACE couplingsScope of delivery:Hydraulic pump with adapter for PTO connectionPower generator unit with integrated welding unit with connection for cable remote control.Welding cable set and cable remote control not included in scope of deliveryCompressed air compressor with 25 litre accumulator,connectionBSP 1/2" internal threadSupplied without compressed air hose and accessoriesHydraulic tank, oil cooling, filterControl unit with vehicle-specific cables and adaptersPrice includes installation (hoses, etc.)The vehicle must be delivered to and collected from us for installation in your vehicle. These transfer costs are not included.* The power take-off must be prepared for the connection of a hydraulic pump; multi-tooth shaft.

The belt-driven hydraulic pump for the FIAT DUCATO 2.2 is perfect for vehicles built from 2021 onwards with a 2184 cm³ / 4-cylinder engine, air conditioning and front-wheel drive (FWD). Even without factory preparation, the system can be easily retrofitted using the complete installation kit with installation material. A magnetic clutch with 108 Nm at 12 volts (6PK belt) is used to ensure reliable power transmission. Depending on the application, hydraulic pumps from 4.5 to 28.2 cm³/revolution are available. When ordering, please specify the required flow rate and note the power limit of the magnetic coupling. The system is from KW Hydraulik and is ideal for mobile applications in the vehicle and municipal sector. Complete installation kit with installation material. FIAT DUCATO 2.2 from year of construction 2021Engine: 2184 cc / 4 cylinderswith air conditioningFront-wheel drive (FWD)No preparation available on the engineMagnetic clutch 108 Nm / 12 Volt (belt 6PK)Available hydraulic pumps that can be combined:4.5 / 6.4 / 7.0 / 8.3 / 9.6 / 11.5 / 14.1 / 16.0 / 17.9 / 21.1 / 23.7 / 25.5 / 28.2 ccm Please specify the required flow rate when ordering. Please note the performance of the magnetic coupling!See also KAEW-FI262-TWIN with tandem pump and two oil circuits!

The belt-driven hydraulic pump for the FIAT DUCATO 3.0 MULTIJET, CITROEN JUMPER 3.0 HDI and PEUGEOT BOXER 3.0 HDI is the ideal solution for vehicles built from 2006 onwards with a 2998 cm³ / 4-cylinder engine (F1C), air conditioning and front-wheel drive (FWD). Even without factory preparation, the system can be installed quickly and safely thanks to the complete installation kit with installation material. A magnetic clutch with 108 Nm at 12 volts (6PK belt) is used to ensure reliable power transmission. Hydraulic pumps with volumes from 4.5 to 28.2 cm³/revolution are available. When ordering, please specify the required flow rate and take into account the power limit of the magnetic coupling. The system comes from the experienced manufacturer KW Hydraulik and is optimised for mobile use in construction and municipal vehicles. Complete installation kit with installation material. FIAT DUCATO 3.0 MULTIJET / CITROEN JUMPER 3.0 HDI / PEUGEOT BOXER 3.0 HDIfrom model year 2006Engine: 2998 cc / 4 cylinders (F1C)with air conditioningFront-wheel drive (FWD)No preparation available on the engineMagnetic clutch 108 Nm / 12 Volt (belt 6PK)Available hydraulic pumps that can be combined:4.5 / 6.4 / 7.0 / 8.3 / 9.6 / 11.5 / 14.1 / 16.0 / 17.9 / 21.1 / 23.7 / 25.5 / 28.2 ccm Please specify the required flow rate when ordering. Please note the performance of the magnetic coupling!See also KAEW-FI258-TWIN with tandem pump and two oil circuits!

The belt-driven hydraulic pump for the FORD TRANSIT CUSTOM offers a sophisticated solution for vehicles from model year 2019 with a 2000 cm³ YNR6 engine, air conditioning and front-wheel drive (FWD). Even if there is no factory preparation on the engine, the system can be easily retrofitted as a complete installation kit including installation material. The built-in magnetic clutch (108 Nm, 12 volts) with 6PK belt drive ensures reliable power transmission. Hydraulic pumps from 4.5 to 28.2 cm³/revolution are available - please specify the required flow rate when ordering. The load limit of the magnetic coupling should always be observed. The system is from KW Hydraulik and is suitable for a wide range of mobile hydraulic applications in the municipal, construction or vehicle technology sectors. Complete installation kit with installation material. FORD TRANSIT CUSTOM from model year 2019Engine: 2000 cc / 4 cylinders (YNR6)with air conditioningFront-wheel drive (FWD)No preparation available on the engineMagnetic clutch 108 Nm / 12 Volt (belt 6PK)Available hydraulic pumps that can be combined:4.5 / 6.4 / 7.0 / 8.3 / 9.6 / 11.5 / 14.1 / 16.0 / 17.9 / 21.1 / 23.7 / 25.5 / 28.2 ccm Please specify the required flow rate when ordering. Please note the performance of the magnetic coupling!See also KAEW-FO232-TWIN with tandem pump and two oil circuits!

The belt-driven hydraulic pump for the FORD TRANSIT CUSTOM HYBRID is the ideal retrofit solution for vehicles built from 2021 onwards with a 2000 cm³ YNR6 engine (hybrid), air conditioning and front-wheel drive (FWD). Even without factory preparation, the complete installation kit with installation material can be easily integrated. Thanks to the compact magnetic clutch with 108 Nm (12 volt, 6PK belt), the system can be used in a variety of ways. Depending on requirements, hydraulic pumps with delivery volumes between 4.5 and 28.2 cm³/revolution are available - please specify the required delivery volume when ordering. Please note the power limit of the magnetic coupling. The system is developed by KW Hydraulik and is ideal for mobile hydraulic applications in the municipal or vehicle sector. Complete installation kit with installation material. FORD TRANSIT CUSTOM HYBRIDfrom year of construction 2021Engine: 2000 cc / 4 cylinders (YNR6) / HYBRIDwith air conditioningFront-wheel drive (FWD)No preparation available on the engineMagnetic clutch 108 Nm / 12 Volt (belt 6PK)Available hydraulic pumps that can be combined:4.5 / 6.4 / 7.0 / 8.3 / 9.6 / 11.5 / 14.1 / 16.0 / 17.9 / 21.1 / 23.7 / 25.5 / 28.2 ccm Please specify the required flow rate when ordering. Please note the performance of the magnetic coupling!See also KAEW-FO242-TWIN with tandem pump and two oil circuits!

The belt-driven hydraulic pump for the IVECO DAILY 2.3 HPT is a specially developed installation kit including installation material that enables simple retrofitting without factory engine preparation. Suitable for models built from 2022 onwards with a 2286 cm³ F1A engine, rear-wheel drive (RWD) and air conditioning, this system offers a robust and efficient solution for hydraulic applications in the commercial vehicle sector. The integrated magnetic clutch (140 Nm / 12 V) transmits the power to the hydraulic unit via an 8PK belt. There is a choice of hydraulic pumps from 4.5 to 28.2 cm³/rev, which can be individually combined. When ordering, please specify the desired flow rate and note the load limit of the magnetic coupling. Developed by KW Hydraulik, this system stands for reliable performance and high compatibility with current IVECO series. Complete installation kit with installation material. IVECO DAILY from model year 2022Engine: 2286 cc / 4 cylinders (F1A)with air conditioningRear-wheel drive (RWD)No preparation available on the engineMagnetic clutch 140 Nm / 12 Volt (belt 8PK)Available hydraulic pumps that can be combined:4.5 / 6.4 / 7.0 / 8.3 / 9.6 / 11.5 / 14.1 / 16.0 / 17.9 / 21.1 / 23.7 / 25.5 / 28.2 ccm Please specify the required flow rate when ordering. Please note the performance of the magnetic coupling!See also KAEW-IV340-TWIN with tandem pump and two oil circuits!

The belt-driven hydraulic pump for the IVECO DAILY 3.0 HPT is a complete retrofit system including installation material that is ideal for vehicles built from 2022 onwards with a 2286 cm³ F1A engine, air conditioning and rear-wheel drive (RWD). This system can also be easily installed on models without factory preparation. The built-in magnetic clutch with 140 Nm at 12 volts reliably transmits the power to the hydraulic pump via an 8PK belt. For maximum flexibility, hydraulic pumps from 4.5 to 28.2 cm³/rev can be combined. The required flow rate must be specified when ordering. Important: Please note the power limit of the magnetic coupling. The system is made by KW Hydraulik and offers a durable solution for a wide range of applications in the field of mobile hydraulic systems. Complete installation kit with installation material. IVECO DAILY from model year 2022Engine: 2286 cc / 4 cylinders (F1A)with air conditioningRear-wheel drive (RWD)No preparation available on the engineMagnetic clutch 140 Nm / 12 Volt (belt 8PK)Available hydraulic pumps that can be combined:4.5 / 6.4 / 7.0 / 8.3 / 9.6 / 11.5 / 14.1 / 16.0 / 17.9 / 21.1 / 23.7 / 25.5 / 28.2 ccm Please specify the required flow rate when ordering. Please note the performance of the magnetic coupling!See also KAEW-IV340-TWIN with tandem pump and two oil circuits!

The belt-driven hydraulic pump for the MERCEDES SPRINTER FWD is ideal for retrofitting a hydraulic system to vehicles without factory-fitted engine preparation. The ready-to-install complete set from KW Hydraulik includes all installation materials and a powerful magnetic coupling with 140 Nm at 12 volts for the belt drive (8PK). The system is compatible with MERCEDES SPRINTER models from model year 2022 with 1950 cc OM654 engine, 4 cylinders, air conditioning and front-wheel drive (FWD). There are numerous hydraulic pump variants to choose from - from 4.5 to 28.2 cm³/rev, depending on the desired delivery rate. This must be specified when ordering. The pump can be used flexibly, for example for tippers, cable winches or loading cranes. Please note the power limit of the magnetic coupling when dimensioning.Complete installation kit with installation material. MERCEDES SPRINTER from model year 2022Engine: 1950 cc / 4 cylinders (OM654)with air conditioningFront-wheel drive (FWD)No preparation available on the engineMagnetic clutch 140 Nm / 12 Volt (belt 8PK)Available hydraulic pumps that can be combined:4.5 / 6.4 / 7.0 / 8.3 / 9.6 / 11.5 / 14.1 / 16.0 / 17.9 / 21.1 / 23.7 / 25.5 / 28.2 ccm Please specify the required flow rate when ordering. Please note the performance of the magnetic coupling!See also KAEW-MB351-TWIN with tandem pump and two oil circuits!

The belt-driven hydraulic pump for the MERCEDES SPRINTER RWD is the optimum solution for retrofitting hydraulic systems to vehicles without engine preparation. The complete installation kit from KW Hydraulik contains all the necessary components including a magnetic clutch with 140 Nm (12 volt) for the belt drive (8PK). Developed for the MERCEDES SPRINTER from model year 2021 with 1950 cc OM654 engine and rear-wheel drive (RWD), the system is suitable for both vehicles with and without air conditioning. The selection of hydraulic pumps ranges from 4.5 to 28.2 cm³/rev, so that a customised configuration is possible. The desired flow rate should be specified when ordering. Please note the power limit of the magnetic coupling to ensure optimum function.Complete installation kit with installation material. MERCEDES SPRINTER from year of construction 2021Engine: 1950 cc / 4 cylinders (OM654)With and without air conditioningRear-wheel drive (RWD)No preparation available on the engineMagnetic clutch 140 Nm / 12 Volt (belt 8PK)Available hydraulic pumps that can be combined:4.5 / 6.4 / 7.0 / 8.3 / 9.6 / 11.5 / 14.1 / 16.0 / 17.9 / 21.1 / 23.7 / 25.5 / 28.2 ccm Please specify the required flow rate when ordering. Please note the performance of the magnetic coupling!See also KAEW-MB344-TWIN with tandem pump and two oil circuits!

PTO - belt-driven hydraulic pump for Renault Master 2.3, FWD, with air conditioning, 140 Nm With the PTO installation kit from KW Hydraulik, you get a complete solution for retrofitting your Renault Master (from model year 2010) with a powerful hydraulic system. The unit includes all installation material and is specially designed for models with front-wheel drive (FWD) and air conditioning, where there is no preparation on the engine. The system is driven by a robust magnetic clutch with 140 Nm, 12 volt and 8PK belt profile. Depending on your requirements, you can choose from a wide range of hydraulic pumps: 4.5 / 6.4 / 7.0 / 8.3 / 9.6 / 11.5 / 14.1 / 16.0 / 17.9 / 21.1 / 23.7 / 25.5 or 28.2 cc. Please be sure to specify the desired flow rate when ordering. Be sure to take the capacity of the magnetic coupling into account to ensure trouble-free operation. Ideally suited for the installation of hydraulic applications in the field of hydraulics for commercial vehicles and vans up to 7.5 tonnes. Complete installation kit with installation material. RENAUL MASTERfrom model year 2010Engine: ccm / 4 cylinderswith air conditioningFront-wheel drive (FWD)No preparation available on the engineMagnetic clutch 140 Nm / 12 Volt (belt 8PK)Available hydraulic pumps that can be combined:4.5 / 6.4 / 7.0 / 8.3 / 9.6 / 11.5 / 14.1 / 16.0 / 17.9 / 21.1 / 23.7 / 25.5 / 28.2 ccm Please specify the required flow rate when ordering. Please note the performance of the magnetic coupling!

Installation kit for belt-driven hydraulic pump - VW CRAFTER / MAN TGE (model year 2017-2022, front-wheel drive, FWD) This complete set for retrofitting a belt-driven hydraulic pump is specially designed for the VW CRAFTER and MAN TGE with front-wheel drive (FWD) - suitable for models from model year 2017 to 2022 with 2.0-litre 4-cylinder engine and air conditioning. The set can be easily installed even without factory preparation. The centrepiece of the system is a magnetic clutch with 108 Nm (12 V). The scope of delivery includes all mounting parts for the belt drive, installation accessories and a hydraulic pump of your choice. The flow rate is freely selectable - please specify the required size when ordering. Available pump sizes: 4.5 / 6.4 / 7.0 / 8.3 / 9.6 / 11.5 / 14.1 / 16.0 / 17.9 / 21.1 / 23.7 / 25.5 / 28.2 ccm Complete installation kit with installation material:VW CRAFTER / MAN TGEfrom year of construction 2017-2022Engine: 1968 ccm / 4 cylinderswith air conditioningFront-wheel drive (FWD)No preparation available on the engineMagnetic clutch 108 Nm / 12 VoltAvailable hydraulic pumps:4.5 / 6.4 / 7.0 / 8.3 / 9.6 / 11.5 / 14.1 / 16.0 / 17.9 / 21.1 / 23.7 / 25.5 / 28.2 ccmPlease specify the required front quantity when ordering.See also KAEW-VW217-TWIN with tandem pump and two oil circuits!

PTO - belt-driven hydraulic pump for VW CRAFTER FWD & 4x4 with 140 Nm clutch This installation kit from KW Hydraulik enables the professional drive of a hydraulic pump via the belt drive on the VW CRAFTER or MAN TGE - for models with front-wheel drive (FWD) or all-wheel drive (4x4) from model year 2018. The vehicles have a 2.0-litre 4-cylinder engine with air conditioning - factory preparation on the engine is not required. The set includes a powerful magnetic clutch with 140 Nm (12 V) as well as all necessary installation parts, belt pulleys and installation components. The hydraulic pump can be selected individually - please specify the required delivery rate when ordering. Available pump sizes: 4.5 / 6.4 / 7.0 / 8.3 / 9.6 / 11.5 / 14.1 / 16.0 / 17.9 / 21.1 / 23.7 / 25.5 / 28.2 ccm Complete installation kit with installation material.VW CRAFTER / MAN TGEfrom year of construction 2018-Engine: 1968 ccm / 4 cylinderswith air conditioningFront-wheel drive (FWD)No preparation available on the engineMagnetic clutch 140 Nm / 12 voltAvailable hydraulic pumps:4.5 / 6.4 / 7.0 / 8.3 / 9.6 / 11.5 / 14.1 / 16.0 / 17.9 / 21.1 / 23.7 / 25.5 / 28.2 ccmPlease specify the required front quantity when ordering.See also KAEW-VW324-TWIN with tandem pump and two oil circuits!

PTO - belt-driven hydraulic pump for VW CRAFTER RWD with 108 Nm clutch This complete installation kit from KW Hydraulik enables the retrofitting of a powerful belt-driven hydraulic pump on vehicles without factory preparation. It is specially designed for the VW CRAFTER / MAN TGE with rear-wheel drive (RWD) from model year 2017-2022. It is driven via a magnetic coupling with 108 Nm (12 V). The compact solution is ideal for a wide range of applications - from municipal use to special vehicles. Included in the set: Ready-to-install system with bracket, mounting material and magnetic coupling 108 Nm Important: The choice of pump must be matched to the power limit of the magnetic coupling. For higher requirements, a system with a reinforced coupling or tandem pump is recommended. Complete installation kit with installation material: VW CRAFTER / MAN TGEfrom year of construction 2017-2022Engine: 1968 cc / 4 cylinderswith air conditioningRear-wheel drive (RWD)No preparation available on the engineMagnetic clutch 108 Nm / 12 VoltAvailable hydraulic pumps that can be combined:4.5 / 6.4 / 7.0 / 8.3 / 9.6 / 11.5 / 14.1 / 16.0 / 17.9 / 21.1 / 23.7 / 25.5 / 28.2 ccm Please specify the required flow rate when ordering. Please note the performance of the magnetic coupling!See also KAEW-VW219-TWIN with tandem pump and two oil circuits!

Complete installation of an underfloor generator set consisting of:Underfloor generatorCardan shaft for auxiliary driveCooling system complete with tankStandard power distributor (stainless steel on request)Standard mounting bracketEarthing rodPower output20 kVAVoltage400/230 Volt +/-10%Frequency50 HzOutput speed of the power take-off1500 rpmCooling systemWater with antifreezeDrive shaftSAE 87-4-8Connection for hydraulic pump B5 / 112Torque at the shaft130 NmProtection classIP65weight65 kgFor installation in your vehicle, the vehicle must be delivered to and collected from us. These transfer costs are not included.* The power take-off must be prepared for the connection of a shaft (SAE 87-4-8).Suitable for the following vehicles with power take-off:MERCEDES BENZ SPRINTERVW CRAFTER (not recommended, extremely difficult installation)*MAN TGE (not recommended, extremely difficult installation)*IVECO DAILYRENAULT MASTER*The battery box and the AdBlue tank must be relocated.

The ROAD CLEANER RC-H is the compact solution for oil spill removal in vans such as the VW T6.1, VW Crafter FWD or FIAT Ducato, which do not have a power take-off (PTO). The drive via the vehicle engine produces no harmful exhaust fumes, which enables safe operation in the cargo area. The system combines a high-pressure cleaner and a vacuum cleaner, with the extracted liquid being collected in a stainless steel container. The hydraulics require 15 litres at 180 bar and are protected by a high-performance cooling system. Other safety features include a thermal circuit breaker, oil level monitor, pressure relief valve and emergency stop switch. The unit is operated via the 12-volt on-board power supply. A 300-litre stainless steel water tank, a 5-litre detergent tank, a washing lance, a hydraulic vacuum cleaner with a suction height of 3 metres and a hose reel with 10 metres of suction hose are already integrated. The system is approved for ATEX-1 and ATEX-21 zones and is ideal for use in potentially explosive atmospheres. You can find more information about the manufacturer here: FEP at KW Hydraulik. Application example: Hydraulics for commercial vehicles & vans up to 7.5 tonnes. This model can be installed in vans that do not have a transmission with power take-off (PTO).VW-T6.1, VW Crafter FWD, FIAT Ducato, ....Driven by the vehicle engine, no harmful exhaust fumes are produced at the unit, which enables safe operation in the cargo area.The hydraulics drive either the high-pressure cleaner or the vacuum cleaner.The extracted liquid is collected in a stainless steel container.The unit can be used in ATEX-1 and ATEX-21 hazardous areas.FeaturesHydraulics: 15 litres at 180 barHydraulic system with high-performance cooling.Thermal protection switch, oil level monitoringPressure gauge and pressure relief valveControl unit with operating hours counterEmergency stop switch (disconnects the system from the drive)12 volt on-board voltage for system control300 litre stainless steel water tank with water separatorTank for cleaning additive 5 litres with proportion regulatorBrush for vacuum cleanerWash lance with high and low pressure nozzleHydraulic vacuum cleanerSuction height 3 metresHose reel with spring return for suction hose, 10 metres, hose diameter 38 mm40 litre tank for holding the oil-water mixture, switch-off when tank is fullApproval for ATEX-1 and ATEX-21 areasDimensions: 1400x1100xH1250mm Model ROAD CLEANER RC-HC with additional gas-powered water heater.