Stripping tools

The 25-240 mm² inner sheath cutter set is a precise special tool for stripping the primary insulation of round conductors - especially when preparing ACSR overhead lines in the medium and high voltage range. Thanks to its modular design and easy handling, the set is ideal for use on the construction site, in network construction or in electrical power distribution.The integrated depth stop in the handle enables precise adjustment of the stripping length from 20 to 100 mm, supported by a practical scale for reproducible cutting results. The easily interchangeable peeling attachments cover cross-sections from 25 to 240 mm² - ideal for all common conductor sizes in overhead line construction.With a maximum insulation thickness of 6 mm, a robust case for safe transport and a replaceable blade, this tool is designed for durability, precision and efficiency. It is the ideal solution for network operators, energy suppliers and installation teams who need to professionally process ACSR cables and XLPE-insulated cables.Available from KW Hydraulik - your partner for high-quality tools in energy and overhead line technology.Tool for stripping the primary insulation of round conductorsDepth stop integrated in the handle for setting the stripping lengthAdjustable from 20 to 100 mmScale integrated in the handleEasily interchangeable stripping attachmentsMaximum insulation thickness: 6 mmReplaceable bladeScope of delivery:Handle with length stopSheathing attachment 25, 35, 50, 70, 95, 120, 150, 185 and 240 mm²Carrying caseAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

The 300-500 mm² inner sheath cutter set is specially designed for precise cutting of the primary insulation of large round conductors - ideal for processing ACSR overhead lines and XLPE-insulated high-voltage cables in network construction. It is used in particular where maximum precision and reliable cutting are required - e.g. when working in electrical power distribution.The depth stop integrated in the handle allows the stripping length to be set precisely from 20 to 100 mm, supported by a clearly legible scale for precise repeat accuracy. The interchangeable peeling attachments cover cross-sections of 300, 400 and 500 mm² - perfect for large conductor cross-sections in overhead line construction and for energy suppliers.The tool processes insulation thicknesses of up to 6 mm and has a replaceable blade that ensures clean and controlled cuts. A robust transport case is included for safe and organised use on site.Available from KW Hydraulik - your reliable partner for professional tools for ACSR, XLPE and high-voltage cable processing.Tool for stripping the primary insulation of round conductorsDepth stop integrated in the handle for setting the stripping length Adjustable from 20 to 100 mm Scale integrated in the handle Easily interchangeable stripping attachments Maximum insulation thickness: 6 mm Replaceable bladeScope of delivery:Handle with length stop300, 400 and 500 mm² stripping attachmentCarrying caseAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

The PBT - fully insulated wire stripper, D=10-45 mm is a safe and precise tool for removing the outer sheath from medium and high-voltage cables, especially XLPE-insulated cables in the field of electrical power distribution. Made from high-quality composite material and insulated up to 1000 V in accordance with IEC EN 60900, the pliers offer maximum user protection - even under live conditions. The wire strippers are suitable for cable diameters from 10 to 45 mm and have three circular cutting blades (1.6 mm cutting depth), a longitudinal cutting blade (2.0 mm) and an integrated notching blade, which can be used to spread the insulation in a targeted manner. This enables clean separation of the sheath without damaging the layers underneath. The tool is also suitable for sector conductors and can be equipped with special blades for lead sheaths or customised cutting depths on request - ideal for flexible use by energy suppliers, network operators or in overhead line construction. Available from KW Hydraulik - your specialist partner for insulated tools and professional solutions in XLPE and ACSR cable processing. Product facts:Made of composite material, 1000 volt insulating (IEC EN 60900).For removing the outer sheath.Diameter: cable Ø 10 - 45 mmCutting depth, round: 1.6 mmCutting depth, lengthwise: 2.0 mmEquipment: 3 blades for the round cut, 1 blade for the longitudinal cut, one notched blade for spreading the insulationOther cutting depths can be combined on request.The pliers are also suitable for stripping sector conductors.Blades for lead sheaths are also available on request.

The PBT - fully insulated wire stripper, D=20-55 mm is a reliable special tool for removing the outer sheath from medium and high-voltage cables, particularly in electrical power distribution and overhead line construction. Made of robust composite material and insulating to 1000 volts in accordance with IEC EN 60900, it offers optimum protection for the user when working under voltage. The pliers are designed for cable diameters from 20 to 55 mm and enable precise and gentle stripping with four circular cutting blades (cutting depth 2.0 mm) and one longitudinal cutting blade (cutting depth 2.4 mm). In addition, an integrated notching blade ensures that the insulation can be spread open in a targeted manner - ideal for solid outer sheaths or complex cable structures. Sector conductors can also be processed without any problems. Alternative cutting depths and special blades for lead sheaths are available on request for special requirements - this makes the tool particularly flexible in use. Available from KW Hydraulik - your experienced partner for insulated tools and professional solutions for cable processing in the ACSR and XLPE sector. Product facts:Made of composite material, 1000 volt insulating (IEC EN 60900).For removing the outer sheath.Diameter: cable Ø 20-55 mmCutting depth, round: 2.0 mmCutting depth, lengthwise: 2.4 mmEquipment: 4 blades for the round cut, 1 blade for the longitudinal cut, one notched blade for spreading the insulationOther cutting depths can be combined on request.The pliers are also suitable for stripping sector conductors.Blades for lead sheaths are also available on request.

The SH130 is a precise, universally applicable combination device for XLPE conductors (XLPE). It can perform three work steps:Remove the outer sheathRemove the extruded semiconductor layerRemove the inner insulationThe tool can be used in a range of Ø 70-130 mm . Developed for use in voltage levels of 10-30 kV, the tool impresses with maximum smoothness, easy handling and clean stripping results - even with oval or curved cables.The three guide jaws with ball bearings ensure perfect concentricity. No use of silicone is required - this reduces effort and contamination. The fine adjustment of the cutting depth allows precise cuts, and a defined end stop ensures a controlled run-out of the tool at the end of the peel.This high-quality skiving tool is ideal for professional applications in electrical power distribution, e.g. for energy suppliers, network operators or service providers in the field of cable removal.Available from KW Hydraulik - your reliable partner for XLPE stripping technology and tools for medium and high-voltage cable processing.Product facts:Combination tool BJ-SH130 for removing the extruded semiconductor layer from cables Ø70-130mmBall bearings on the guide jaws ensure smooth and easy operation. No silicone is required for lubrication.The cutting depth of the peeling blade can be adjusted via a fine adjustment. At the end of peeling, the device runs out cleanly at a previously fixed stop.Delivery:Combination tool for Ø 70 - 130 mm in a case

The SH50 is a precise, universally applicable combination device for XLPE conductors (XLPE). It can perform three work steps:Remove the outer sheathRemove the extruded semiconductor layerRemove the inner insulationThe tool can be used in a range of Ø 15-50 mm . Developed for use in voltage levels of 10-30 kV, the tool impresses with maximum smoothness, easy handling and clean stripping results - even with oval or curved cables.The three guide jaws with ball bearings ensure perfect concentricity. No use of silicone is required - this reduces effort and contamination. The fine adjustment of the cutting depth allows precise cuts, and a defined end stop ensures a controlled run-out of the tool at the end of the peel.This high-quality skiving tool is ideal for professional applications in electrical power distribution, e.g. for energy suppliers, network operators or service providers in the field of cable removal.Available from KW Hydraulik - your reliable partner for XLPE stripping technology and tools for medium and high-voltage cable processing.Product facts:Combination tool BJ-SH50 for removing the extruded semiconductor layer from cables Ø15-50mmBall bearings on the guide jaws ensure smooth and easy operation. No silicone is required for lubrication.The cutting depth of the peeling blade can be adjusted via a fine adjustment. At the end of peeling, the device runs out cleanly at a previously fixed stop.Delivery:Combination tool for Ø 15 - 50 mm in a caseAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

The SH80 is a precise, universally applicable combination device for XLPE conductors (XLPE). It can perform three work steps:Remove the outer sheathRemove the extruded semiconductor layerRemove the inner insulationThe tool can be used in a range of Ø 40-80 mm . Developed for use in voltage levels of 10-30 kV, the tool impresses with maximum smoothness, easy handling and clean stripping results - even with oval or curved cables.The three guide jaws with ball bearings ensure perfect concentricity. No use of silicone is required - this reduces effort and contamination. The fine adjustment of the cutting depth allows precise cuts, and a defined end stop ensures a controlled run-out of the tool at the end of the peel.This high-quality skiving tool is ideal for professional applications in electrical power distribution, e.g. for energy suppliers, network operators or service providers in the field of cable removal.Available from KW Hydraulik - your reliable partner for XLPE stripping technology and tools for medium and high-voltage cable processing.Product facts:Combination tool BJ-SH80 for removing the extruded semiconductor layer from cables Ø40-80mmBall bearings on the guide jaws ensure smooth and easy operation. No silicone is required for lubrication.The cutting depth of the peeling blade can be adjusted via a fine adjustment. At the end of peeling, the device runs out cleanly at a previously fixed stop.Delivery:Combination tool for Ø 40 - 80 mm in a case

The GB-M110 sheath cutter was developed for the precise stripping of XLPE high-voltage cables up to an outer diameter of 130 mm and is therefore ideal for use in the field of electrical power distribution and for processing ACSR overhead lines. The tool enables reliable and controlled removal of the outer insulation layer - for example on cables up to 630 mm² at 110 kV. Equipped with a standard blade with a cutting length of 22 mm, the sheath cutter ensures clean cutting edges without damaging the underlying layers. Depending on requirements, the tool is available with three different cutting depths (14, 22 or 35 mm) - ideal for different sheath materials and insulation thicknesses in the high-voltage range. The GB-M110 is supplied in a sturdy transport case with foam padding - perfectly protected for mobile use on construction sites and in overhead line construction. This professional tool offers maximum safety, precision and durability for energy suppliers, grid operators and installation teams in the high-voltage sector. Available from KW Hydraulik - your specialist for precise and safe tools for cable processing in the ACSR and XLPE environment.Product facts:GB-M110 sheath cutter up to 630 mm² at 110 kV, D=50-130 mmWith standard blade 22 mm cutting lengthAvailable with three different cutting depths (14, 22 or 35 mm)Supplied in a transport case with foam padding

The sheath cutter for XLPE medium-voltage cables up to Ø 54 mm is a versatile special tool for safe and clean processing of XLPE-insulated medium-voltage cables in the range from 15 to 54 mm cable diameter. Ideal for XLPE single-core cables from 35 mm² (10 kV) to 500 mm² (30 kV), the tool enables both stripping of the outer sheath and targeted removal of the insulation - with just one device. The blade is designed for wall thicknesses of up to 15 mm and has two adjustable feed angles as well as a zero position, which enables precise, straight stripping. Thanks to the special blade shape, the cable sheath is slightly raised at the cut point - this protects the underlying structural elements from damage. The tool achieves optimum results at a cutting depth of approx. 70 % - an important safety advantage for sensitive cable assemblies. This precision tool is the ideal solution for network operators, energy suppliers and installation teams in the field of electrical power distribution. The tool has roller guides. The use of silicone as a lubricant is not necessary.Available from KW Hydraulik - your partner for professional tools for all aspects of XLPE and overhead line technology. Product facts:Easily cuts XLPE outer sheath and layer sheath. The blade is designed for cutting wall thicknesses of up to 15 mm. Two feed angles and a zero position for the blade can be set. Precise and straight cutting of the jacket is guaranteed. Working range for XLPE single-core cables from 35 mm² 10 KV, up to 500 mm² 30 KV, between 15 and 54 mm cable diameter. The shape of the blade lifts the sheath at the cut point and thus prevents damage to the structural elements. A cutting depth of approx. 70 % is perfectly adequate. ► Two functions in one device:► Stripping the outer sheath and stripping the insulation!

The sheath cutter for XLPE medium-voltage cables up to D=55 mm is a versatile special tool for safe and clean processing of XLPE-insulated medium-voltage cables in the range from 15 to 55 mm cable diameter. Ideal for XLPE single-core cables from 35 mm² (10 kV) to 500 mm² (30 kV), the tool enables both stripping of the outer sheath and targeted removal of the insulation - with just one device. The blade is designed for wall thicknesses of up to 10 mm and has two adjustable feed angles as well as a zero position, which enables precise, straight stripping. Thanks to the special blade shape, the cable sheath is slightly raised at the cut point - this protects the underlying structural elements from damage. The optional GB-M20-S9 plastic insert can be used for particularly small cross-sections of less than 22 mm. The tool achieves optimum results at a cutting depth of approx. 80 % - an important safety advantage for sensitive cable assemblies. The scope of delivery includes operating instructions, a replacement blade and the appropriate Allen key for changing the blade. This precision tool is the ideal solution for network operators, energy suppliers and installation teams in the field of electrical power distribution. The tool has roller guides. The use of silicone as a lubricant is not necessary.Available from KW Hydraulik - your partner for professional tools for all aspects of XLPE and overhead line technology. Product facts:Easily cuts XLPE - outer sheath and layer sheath. The blade is designed for cutting wall thicknesses of up to 10 mm. Two feed angles and a zero position for the blade can be set. Precise and straight cutting of the jacket is guaranteed. Working range for XLPE single-core cables from 35 mm² 10 KV, up to 500 mm² 30 KV, between 15 and 55 mm cable diameter. To protect the peeled semiconductor layer and for processing smaller cross-sections with a diameter of less than 22 mm, insert the GB-M20-S9 plastic insert. The shape of the blade lifts the sheath at the cut point and thus prevents damage to the components. A cutting depth of approx. 80 % is perfectly adequate. ► Two functions in one device:► Stripping the outer sheath and stripping the insulation!Cable sheath cutter withoperating instructions1 x spare bladeAllen key for changing the blade

The GB-M30 sheath cutter for XLPE medium-voltage cables up to D=70 mm enables the outer sheath and insulation to be cut and stripped with just one tool - quickly, precisely and without damaging the material. The tool is particularly suitable for larger cable cross-sections in the 10, 20 and 30 kV range, for example for XLPE-insulated single-core cables up to 630 mm² with cable diameters from Ø 32 to 70 mm. The handling corresponds to the proven GB-M20 device and at the same time offers extended performance reserves for thicker wall thicknesses up to approx. 14 mm. An optional plastic prism is available for smaller cable diameters up to approx. Ø 20 mm, which facilitates the processing of particularly thin cross-sections. The sheath cutter ensures a clean cut without damaging the internal cable structure and is therefore ideal for use by energy suppliers, network operators and cable installation services. Particularly in the field of electrical power distribution, it offers a safe solution for the precise preparation of medium-voltage cables with high insulation thickness. Available from KW Hydraulik - your expert for high-quality tools for cable processing in energy and overhead line technology. Product facts:Cutting and stripping of outer sheath and insulation with just one tool. The work steps and handling are similar to our GB-M20 device. The GB-M30 sheath cutter is designed for processing larger cable cross-sections in the 10 and 20 KV range, but especially for the 30 KV voltage level, with a working range of Ø 32 - 70 mm. Wall thicknesses of up to approx. 14 mm can be cut without any problems. With the optional plastic prism, small cables up to approx. Ø 20 mm can be processed.up to 630 mm² at 30 kV, D=32-70 mm