Peeling devices for XLPE cables

The GB-DS1-DRIVE gearbox attachment is the ideal addition to the GB-DS1 and GB-DS1-EVO field stripping devices from GBZ. It enables the hybrid stripping device to be driven electrically using a standard cordless screwdriver - for particularly fast, even and controlled stripping of the conductive layer on XLPE-insulated medium-voltage cables with a diameter of Ø 16-42 mm. Using the GB-DS1-DRIVE significantly reduces the amount of manual labour required. The result: a homogeneous stripping result with greater efficiency and precision - ideal for professional use in network construction, by energy suppliers or in electrical power distribution. A commercially available cordless screwdriver with a recommended speed of less than 1000 rpm is used for the drive. This guarantees safe working and optimum peeling behaviour. If no electric drive is available, the GB-DS1-EVO peeling tool can still be operated manually without any problems.Available from KW Hydraulik - your specialist partner for high-quality peeling technology and tools for XLPE cable processing in the medium-voltage network.Product facts:Gearbox attachment for mounting on DS1 field limit stripping devices.The GB-DS1-DRIVE gearbox is used to drive the GB-DS1-STANDARD or GB-DS1-EVO stripping device using a standard cordless screwdriver. It is used for fast, effective and extremely homogeneous stripping of the conductive layer of medium-voltage cables with a diameter of Ø 16-42 mm.Please use a commercially available cordless screwdriver for the electric drive. Please pay attention to the rotation speed. We recommend a cordless screwdriver speed of less than 1000 rpm for safe working and optimum peeling results.If no electric drive is available, the GB-DS1-EVO hybrid peeler can also be operated manually.Delivery:GB-DS1-DRIVE gearbox attachmentDelivery WITHOUT GB-DS1-EVO peeling device for Ø 16 - 42 mmSupplied WITHOUT Cordless screwdriver

The GB-DS1-EVO is a precise, universal peeling device for removing the extruded semiconductor layer on XLPE-insulated medium-voltage cables with a diameter of Ø 16-42 mm. Developed for use in voltage levels of 10-30 kV (and beyond), the device impresses with maximum smoothness, easy handling and clean peeling results - even with oval or curved cables. The three guide jaws with ball bearings ensure perfect concentricity, while a spring-loaded, adaptable guide jaw enables secure cable guidance even with irregular cross-sections. No use of silicone is required - this reduces effort and contamination. The fine adjustment of the cutting depth allows precise cuts, and a defined end stop ensures a controlled run-out of the tool at the end of the peel. As an option, the GB-DS1-EVO can be combined with the separately available GB-DS1-DRIVE gearbox attachment and operated using a standard cordless screwdriver - ideal for time-saving work in network construction. This high-quality peeling tool is ideal for professional applications in electrical power distribution, e.g. for energy suppliers, network operators or service providers in cable installation. Available from KW Hydraulik - your reliable partner for XLPE stripping technology and tools for medium and high-voltage cable processing. Product facts:GB-DS1-EVO peeling tool for removing the extruded semiconductor layer from Ø16-42 mm cablesA universal tool for peeling off the solid extruded outer conductive layer on medium voltage cables with 10-30 KV and also higher voltage levels. The three guide jaws ensure optimum concentricity of the tools. A spring-mounted guide jaw guarantees that even oval and curved cables can be peeled cleanly and with excellent results. Ball bearings on the guide jaws ensure smooth and easy operation. No silicone is required for lubrication.The cutting depth of the peeling blade can be adjusted via a fine adjustment. At the end of peeling, the appliance runs out cleanly at a previously fixed stop.The peeler can be operated with a standard cordless screwdriver using the optionally available, adaptable GB-DS1-DRIVE drive unit!Delivery:Peeling device for Ø 16 - 42mm

The GB-DS1-STANDARD stripper is a universal tool for the clean removal of the extruded outer conductive layer on XLPE-insulated medium-voltage cables in the diameter range of Ø 16-42 mm. Designed for voltage levels of 10-30 kV, it is also suitable for larger applications and is a proven standard in the field of electrical power distribution. The three stable guide jaws with sliding surfaces ensure precise concentricity on the cable. A spring-loaded guide jaw also adapts to oval or slightly curved cables and enables a clean, even stripping result. The use of silicone as a lubricant is required to minimise friction. The cutting depth of the blade can be finely adjusted so that the tool can be adapted precisely to the respective sheath thickness. A pre-fixed stop at the end of the cable ensures that the tool runs out in a controlled and defined manner - without damaging neighbouring layers. For greater efficiency in use, the tool can be combined with the optionally available GB-DS1-DRIVE gearbox attachment and operated with a standard cordless screwdriver - ideal for longer or recurring applications. Available from KW Hydraulik - your experienced partner for professional tools for XLPE cable processing in the medium voltage range. Product facts:GB-DS1-STANDARD peeling tool for removing the extruded semiconductor layer from Ø16-42 mm cablesA universal tool for peeling off the solid extruded outer conductive layer on medium-voltage cables with 10-30 KV and even higher voltage levels. The three guide jaws ensure optimum concentricity of the tools. A spring-mounted guide jaw guarantees that even oval and curved cables can be peeled cleanly and with excellent results. Sliding surfaces on the guide jaws. Silicone is required for lubrication.The cutting depth of the peeling blade can be adjusted via a fine adjustment. At the end of peeling, the appliance runs out cleanly at a previously fixed stop.The peeler can be operated with a standard cordless screwdriver using the optionally available, adaptable GB-DS1-DRIVE drive unit!Delivery:Peeling tool for Ø16-42mm

The GB-DS2-DRIVE gearbox attachment is the ideal addition to the GB-DS2 and GB-DS2-EVO field stripping devices from GBZ. It enables the hybrid stripping device to be driven electrically using a standard cordless screwdriver - for particularly fast, even and controlled stripping of the conductive layer on XLPE-insulated medium-voltage cables with a diameter of Ø 34-60 mm.Using the GB-DS2-DRIVE significantly reduces the amount of manual labour required. The result: a homogeneous stripping result with greater efficiency and precision - ideal for professional use in network construction, by energy suppliers or in electrical power distribution.A commercially available cordless screwdriver with a recommended speed of less than 1000 rpm is used for the drive. This guarantees safe working and optimum peeling behaviour. If no electric drive is available, the GB-DS2-EVO peeling tool can still be operated manually without any problems.Available from KW Hydraulik - your specialist partner for high-quality peeling technology and tools for XLPE cable processing in the medium-voltage network.Product facts:Gearbox attachment for mounting on DS2 field limit stripping devices.The GB-DS2-DRIVE gearbox is used to drive the GB-DS2-STANDARD or GB-DS2-EVO stripping device using a standard cordless screwdriver. It is used for fast, effective and extremely homogeneous stripping of the conductive layer of medium-voltage cables with a diameter of Ø 34-60 mm.Please use a commercially available cordless screwdriver for the electric drive. Be sure to observe the rotation speed. We recommend a cordless screwdriver speed of less than 1000 rpm for safe working and optimum peeling results.If no electric drive is available, the GB-DS2-EVO hybrid peeler can also be operated manually.Delivery:GB-DS2-DRIVE gearbox attachmentSupplied WITHOUT GB-DS2-EVO peeling device for Ø 34-60 mmSupplied WITHOUT cordless screwdriver

The GB-DS2-EVO is a powerful peeling device for the precise removal of the extruded semiconductor layer on XLPE-insulated medium-voltage cables with a diameter of Ø 34-60 mm. Developed for applications in the 10-30 kV range and beyond, it is ideal for professional use by energy suppliers, network operators and in the field of electrical power distribution. Three stably guided guide jaws with integrated ball bearings guarantee smooth rotation of the device - even with oval or slightly curved cables. A spring-loaded guide jaw also ensures a secure hold and a homogeneous peeling result. Silicone is not required as a lubricant, which makes handling cleaner and more efficient. The cutting depth of the peeling blade can be finely adjusted so that the tool can be precisely adapted to the respective sheath thickness. A fixable end stop ensures a controlled run-out of the tool at the end of the peeling process - for maximum safety and precision. For electric operation, the peeling tool can be combined with a cordless screwdriver using the optional GB-DS2-DRIVE gearbox attachment - ideal for regular use or long cable lengths. Available from KW Hydraulik - your specialist for XLPE stripping technology and professional tools for medium and high-voltage cable processing. Product facts:Peeling tool GB-DS2-Standard for removing the extruded semiconductor layer from cables Ø34-60mmA universal tool for peeling off the solid extruded outer conductive layer on medium voltage cables with 10-30 KV and also higher voltage levels. The three guide jawsensure optimum concentricity of the devices . A spring-mounted guide jaw guarantees that even oval and curved cables are processed cleanly and with very good peeling results. Ball bearings on the guide jaws ensure smooth and easy operation. It is no silicone is required for lubrication.The cutting depth of the peeling blade can be adjusted via a fine adjustment. At the end of peeling, the appliance runs out cleanly at a previously fixed stop.The peeler can be operated with a standard cordless screwdriver using the optionally available, adaptable GB-DS2-DRIVE drive unit!Delivery:Peeling tool for Ø34-60mm

The GB-DS2-STANDARD is a robust and proven stripping tool for removing the extruded semiconductor layer on XLPE-insulated medium-voltage cables with a diameter of Ø 34-60 mm. It is suitable for use in voltage levels from 10 to 30 kV and above, making it a reliable tool for energy suppliers, network operators and service providers in the field of electrical power distribution. Three stable guide jaws with sliding surfaces ensure precise concentricity on the cable. A spring-loaded guide jaw also automatically adapts to oval or curved cables, thus ensuring an even and clean stripping result. The use of silicone as a lubricant is required for smooth operation. The cutting depth can be precisely adjusted by means of a fine adjustment, which enables work that is gentle on the material. At the end of the cable, the device runs out in a controlled manner at a previously fixed end stop - for maximum precision and safety when working on tension-sensitive cable systems. For semi-automatic operation, the device can be combined with the optionally available GB-DS2-DRIVE drive unit and a standard cordless screwdriver - ideal for efficient work on recurring applications. Available from KW Hydraulik - your specialist dealer for professional tools for working on medium-voltage cables in overhead line and network construction. Product facts:Peeling tool GB-DS2-Standard for removing the extruded semiconductor layer from cables Ø34-60mmA universal tool for peeling off the solid extruded outer conductive layer on medium-voltage cables with 10-30 KV and also higher voltage levels. The three guide jawsensure optimum concentricity of the devices . A spring-mounted guide jaw guarantees that even oval and curved cables are processed cleanly and with very good peeling results. Sliding surfaces on the guide jaws. Silicone is required for lubrication.The cutting depth of the peeling blade can be adjusted via a fine adjustment. At the end of peeling, the appliance runs out cleanly at a previously fixed stop.The peeler can be operated with a standard cordless screwdriver using the optionally available, adaptable GB-DS2-DRIVE drive unit!Delivery:Peeling tool for Ø34-60mm

The GB-KS-2-2 peeling tool is the professional solution for precise removal of the extruded semiconductor layer on XLPE-insulated high-voltage cables. Specially developed for applications in the high and extra-high voltage range, the tool enables a uniform, clean cut pattern - without damaging the underlying insulation. Time-consuming reworking such as sanding is reduced to a minimum. The working range covers wire diameters from Ø 40 to 110 mm and therefore covers a wide range of applications for high-voltage cables up to 110 kV. The automatic feed function is controlled via an adjustable upper guide unit, while the device can be flexibly adapted to different diameters - thanks to variably interchangeable roller guides in the lower area. The depth adjustment of the peeling blade is carried out precisely via an adjusting screw with a grid division (0.1 mm per notch), which guarantees fine and reproducible peeling control - ideal for sensitive cable structures. The tool is supplied in a robust transport case with foam padding, protected and ready for use on site. It is particularly suitable for electrical power distribution projects in high-voltage networks - wherever absolute precision is required for cable preparation. Available from KW Hydraulik - your partner for professional tools for XLPE cable processing in the high and medium voltage range. Product facts:For removing the extruded semiconductor layer.Supplied in a transport case with foam padding. Extruded, welded outer conductor layers are easily removed from extra-high voltage cables with cross-linked polyethylene (XLPE) insulation. Subsequent sanding work is reduced to a minimum.Uniform cut pattern on the coreWorking range 40 - 110 mm core diameterAutomatic feed through adjustable setting of the upper guide unitVariable adaptation of the device to different diameters by repositioning the lower roller guidesDepth adjustment of the peeling blade by adjusting screw with grid division (fine adjustment 0.1 mm / grid)

The GB-L20 stripper has been specially developed for the precise removal of the extruded semiconductor layer on XLPE-insulated medium-voltage cables with a diameter of Ø 15 to 49 mm. It is ideal for applications in voltage levels from 10 to 30 kV and is therefore a reliable solution for network operators, energy suppliers and installation teams in electrical power distribution. The tool ensures an even, clean peeling result with a high level of work safety. It is compact, robust and specially designed for use in construction site conditions - whether in overhead line construction, transformer areas or cable installation in stationary networks. The GB-L20 is easy to use and enables controlled depth adjustment so as not to damage the underlying insulation. It is suitable for a wide range of cable types with an extruded conductive layer and offers high repeat accuracy for series production. The tool has roller guides. The use of silicone as a lubricant is not necessary. Available from KW Hydraulik - your specialist partner for professional XLPE stripping technology in the medium voltage range.

The GB-P20 stripping tool is a versatile precision tool for controlled stripping of the extruded outer conductive layer on XLPE-insulated medium-voltage cables in the 10-30 kV range - suitable for cable diameters from Ø 10 to 52 mm. It has been specially developed for professional use by energy suppliers, network operators and cable installation teams in electrical power distribution. The stripping process starts directly at the cable end, the typical stripping dimension is approx. 25 mm. The integrated sliding jaw controls the automatic feed, resulting in a consistently high surface quality. The carbide peeling blade is durable, finely ground and can be manually adjusted and fixed at a depth of 0-1.2 mm in 0.1 mm increments - for maximum control and precise work. The feed plate can be adjusted in five positions for application-specific adjustments.An adjustable handle with two positions improves ergonomics during use. At the end of the peeling process, a precise round cut can be made by simply resetting the sliding jaw - ideal for professional series processing. Available from KW Hydraulik - your specialist dealer for high-quality tools for XLPE cable processing in the medium-voltage network.Product facts:A universal tool for controlled stripping of the firmly extruded outer conductive layeron medium-voltage cables with 10 - 30 KV and higher voltage levels. Working range 10 - 52 mm cable diameter.Stripping starts directly at the cable end, the stripping dimension is approx. 25 mm.The feed rate is predetermined by the sliding jaw and guarantees a consistently good quality of the peeling surface.The peeling blade is ground from carbide, the peeling depth can be set and fixed manually.At the end of the peeling operation, the round cut is achieved by simply resetting the sliding jaw.To achieve optimum peeling results, the feed plate can be adjusted in 5 positions.0 = Radial round cut, 1 = Small feed for larger cable cross-sections and 2 = Large feed for fast and clean work with smaller diameters.with smaller diameters. To improve handling, the handle can be fixed in two different mounting holes.Adjustable peeling depth 0 - 1.2 mm with 0.1 mm fine adjustmentPeeling starts directly at the end of the cableAutomatic work feedFour feed angles, one zero position adjustableSupplied as standard:Cable peelerSilicone pasteSpanner for blade changeOperating instructions

The CST235 stripper has been specially developed for the precise removal of the extruded semiconductor layer on XLPE-insulated medium-voltage cables with a diameter of Ø 30 to 54 mm. It is ideal for applications in voltage levels from 10 to 30 kV, making it a reliable solution for network operators, energy suppliers and installation teams in electrical power distribution. The tool ensures an even, clean peeling result with a high level of work safety. It is compact, robust and specially designed for use in construction site conditions - whether in overhead line construction, transformer areas or cable installation in stationary networks. The CST235 is easy to use and enables controlled depth adjustment so as not to damage the underlying insulation. It is suitable for a wide range of cable types with an extruded conductive layer and offers a high level of repeat accuracy for series work.The tool has roller guides. The use of silicone as a lubricant is not necessary. Available from KW Hydraulik - your specialist partner for professional XLPE stripping technology in the medium voltage range.

The SH130 is a precise, universally applicable combination device for XLPE conductors (XLPE). It can perform three work steps:Remove the outer sheathRemove the extruded semiconductor layerRemove the inner insulationThe tool can be used in a range of Ø 70-130 mm . Developed for use in voltage levels of 10-30 kV, the tool impresses with maximum smoothness, easy handling and clean stripping results - even with oval or curved cables.The three guide jaws with ball bearings ensure perfect concentricity. No use of silicone is required - this reduces effort and contamination. The fine adjustment of the cutting depth allows precise cuts, and a defined end stop ensures a controlled run-out of the tool at the end of the peel.This high-quality skiving tool is ideal for professional applications in electrical power distribution, e.g. for energy suppliers, network operators or service providers in the field of cable removal.Available from KW Hydraulik - your reliable partner for XLPE stripping technology and tools for medium and high-voltage cable processing.Product facts:Combination tool BJ-SH130 for removing the extruded semiconductor layer from cables Ø70-130mmBall bearings on the guide jaws ensure smooth and easy operation. No silicone is required for lubrication.The cutting depth of the peeling blade can be adjusted via a fine adjustment. At the end of peeling, the device runs out cleanly at a previously fixed stop.Delivery:Combination tool for Ø 70 - 130 mm in a case

The SH50 is a precise, universally applicable combination device for XLPE conductors (XLPE). It can perform three work steps:Remove the outer sheathRemove the extruded semiconductor layerRemove the inner insulationThe tool can be used in a range of Ø 15-50 mm . Developed for use in voltage levels of 10-30 kV, the tool impresses with maximum smoothness, easy handling and clean stripping results - even with oval or curved cables.The three guide jaws with ball bearings ensure perfect concentricity. No use of silicone is required - this reduces effort and contamination. The fine adjustment of the cutting depth allows precise cuts, and a defined end stop ensures a controlled run-out of the tool at the end of the peel.This high-quality skiving tool is ideal for professional applications in electrical power distribution, e.g. for energy suppliers, network operators or service providers in the field of cable removal.Available from KW Hydraulik - your reliable partner for XLPE stripping technology and tools for medium and high-voltage cable processing.Product facts:Combination tool BJ-SH50 for removing the extruded semiconductor layer from cables Ø15-50mmBall bearings on the guide jaws ensure smooth and easy operation. No silicone is required for lubrication.The cutting depth of the peeling blade can be adjusted via a fine adjustment. At the end of peeling, the device runs out cleanly at a previously fixed stop.Delivery:Combination tool for Ø 15 - 50 mm in a caseAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

The SH80 is a precise, universally applicable combination device for XLPE conductors (XLPE). It can perform three work steps:Remove the outer sheathRemove the extruded semiconductor layerRemove the inner insulationThe tool can be used in a range of Ø 40-80 mm . Developed for use in voltage levels of 10-30 kV, the tool impresses with maximum smoothness, easy handling and clean stripping results - even with oval or curved cables.The three guide jaws with ball bearings ensure perfect concentricity. No use of silicone is required - this reduces effort and contamination. The fine adjustment of the cutting depth allows precise cuts, and a defined end stop ensures a controlled run-out of the tool at the end of the peel.This high-quality skiving tool is ideal for professional applications in electrical power distribution, e.g. for energy suppliers, network operators or service providers in the field of cable removal.Available from KW Hydraulik - your reliable partner for XLPE stripping technology and tools for medium and high-voltage cable processing.Product facts:Combination tool BJ-SH80 for removing the extruded semiconductor layer from cables Ø40-80mmBall bearings on the guide jaws ensure smooth and easy operation. No silicone is required for lubrication.The cutting depth of the peeling blade can be adjusted via a fine adjustment. At the end of peeling, the device runs out cleanly at a previously fixed stop.Delivery:Combination tool for Ø 40 - 80 mm in a case