Processing XLPE cables and stowing ACSR overhead lines

The stripping tool for overhead lines (ACSR) is a professional special tool for precise stripping of the aluminium conductor sheath of aluminium-steel cables (AL/ST). It is suitable for use with ACSR cables with a conductor cross-section of 1250-1440 mm² - ideal for installations in the field of electrical power distribution and overhead line construction.The tool works with an adjustable cutting wheel that enables clean and controlled stripping of the outer aluminium wires without damaging the inner steel core. This ensures tension-proof preparation for connectors or terminations - a crucial step in the professional processing of ACSR cables.The tool is equipped with a holder for guide bushes for precise guidance and adaptation to different cable diameters. Guide bushes are available separately and enable optimum centring during the cutting process.The cutting tool offers a robust, practical solution for energy suppliers, network operators and installation teams in high and medium voltage networks.Available from KW Hydraulik - your partner for high-quality tools for working on ACSR overhead lines and high-voltage infrastructure.Tool for removing the aluminium conductor sheath from AL/ST cables.With adjustable cutting wheel for stripping the aluminium wires on AL/ST cables with conductor cross-sections of 1250-1440 mm²Holder for guide bushesPlease order guide bushes separately (not included in the scope of delivery)All-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

The stripping tool for overhead lines (ACSR) is a professional special tool for precise stripping of the aluminium conductor sheath of aluminium-steel cables (AL/ST). It is suitable for use with ACSR cables with a conductor diameter of up to 43 mm - ideal for installations in the field of electrical power distribution and overhead line construction.The tool works with an adjustable cutting wheel that enables the outer aluminium wires to be cut cleanly and in a controlled manner without damaging the inner steel core. This ensures tension-proof preparation for connectors or terminations - a crucial step in the professional processing of ACSR cables.The tool is equipped with a holder for guide bushes for precise guidance and adaptation to different cable diameters. Guide bushes are available separately and enable optimum centring during the cutting process.The cutting tool offers a robust, practical solution for energy suppliers, network operators and installation teams in high and medium voltage networks.Available from KW Hydraulik - your partner for high-quality tools for working on ACSR overhead lines and high-voltage infrastructure.Tool for removing the aluminium conductor sheath from AL/ST cables.With adjustable cutting wheel for stripping the aluminium wires of AL/ST cables up to a maximum conductor diameter of 43 mmHolder for guide bushesPlease order guide bushes separately (not included in the scope of delivery)All-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

The cone cutter for XLPE cables - 120-150 mm² is a professional special tool for conically chamfering the stepped conductor insulation layer on XLPE-insulated medium-voltage cables. The conical cut is an essential step in the installation of joints and terminations and ensures a voltage-optimised transition between insulation and fittings - essential for safe operation in the field of electrical power distribution.The application is carried out in three coordinated steps:Processing the extruded conductive layer with a suitable peeling deviceCutting the insulation to a defined size using a sheath cutterConical chamfering of the exposed insulation with the appropriate cone cutterThis cone cutter is specially designed for cable cross-sections of 120-150 mm² and enables precise, reproducible peeling results - even under construction site conditions. The tool helps to avoid assembly errors, reduce push-on forces and ensure the long-term reliability of the cable connection.Available from KW Hydraulik - your specialist for XLPE tools and professional cable processing in the medium-voltage network.At a glance:KS cutting tools for conical chamfering of the stepped conductor insulation layer.Processing the conductor layer with a peeling toolCut insulation to size with sheath cutterPeel the insulation with a suitable cone cutterDiameter: 14.8 to 26.0 mmCone length: 40-50 mm

The cone cutter for XLPE cables - 185-240 mm² is a high-quality special tool for conically chamfering the stepped conductor insulation layer on XLPE-insulated medium-voltage cables. The precise tapered cut ensures a stress-resistant transition between the insulation and cable accessories - a critical step for standard-compliant installation in electrical power distribution.Processing takes place in three structured work steps:Processing the extruded conductive layer with a suitable peeling deviceCutting the insulation to size with a suitable sheath cutterConical chamfering of the insulation with the cone cutter, which is precisely matched to the cable cross-sectionThis cone cutter has been specially developed for cables with 185-240 mm² conductor cross-sections and ensures an even, smooth cone surface - ideal for voltage-optimised installation of joints and terminations. The tool is robust, easy to use and delivers reproducible results, even under demanding conditions on the construction site.Available from KW Hydraulik - your partner for professional XLPE cable tools and safe installation in the medium-voltage network.At a glance:KS cutting tools for conical chamfering of the stepped conductor insulation layer.Processing the conductor layer with a peeling toolCut insulation to size with sheath cutterPeel the insulation with a suitable cone cutterDiameter: Ø 19.0-29.9 mmCone length: 40-50 mm

The cone cutter for XLPE cables - 300-630 mm² is a robust professional tool for conically chamfering the stripped insulation on medium and high-voltage XLPE-insulated cables. The conical shape ensures a defined transition between the stripped insulation and the cable accessories, reducing push-on forces and effectively preventing installation damage - an indispensable work step in electrical power distribution.The work process takes place in three clearly defined steps:Peeling the extruded conductive layer with a suitable peeling deviceCutting the insulation to the exact length with a sheath cutterConical chamfering of the deposited insulation with the cone cutterThis cone cutter is specially designed for large conductor cross-sections of 300-630 mm² and ensures a uniform, smooth cone pattern - the prerequisite for standard-compliant and durable fitting assembly in the high and medium voltage range. The precise cut minimises the risk of micro-cracks and increases the operational reliability of the connection.Available from KW Hydraulik - your reliable specialist dealer for high-quality tools for XLPE cable processing in the power supply network.At a glance:KS cutting tools for conical chamfering of the stepped conductor insulation layer.Processing the conductor layer with a peeling toolCut insulation to size with jacket cutterPeel the insulation with a suitable cone cutterDiameter: Ø30.8 to 46.7 mmCone length: 40-50 mm

The cone cutter for XLPE cables - 50 mm² is a precise special tool for conically chamfering the stepped conductor insulation on XLPE-insulated medium-voltage cables. The neatly machined cone enables the voltage-optimised pushing on of joints or terminations and is an indispensable work step in standard-compliant cable assembly in electrical power distribution.The correct procedure is carried out in three steps:Removalof the extruded conductive layer with a peeling deviceCutting the insulation to the exact length using a jacket cutterConical chamfering of the insulation with the cone cutter to match the cross-sectionThe cone cutter is specially designed for cables with a 50 mm² cross-section and ensures an even, smooth bevel - ideal for safe, reproducible work during installations in network construction, for energy suppliers or in the transformer sector.Available from KW Hydraulik - your experienced partner for precision tools for XLPE cable processing in the medium voltage range.At a glance:KS cutting tools for conical chamfering of the stepped conductor insulation layer.Processing the conductor layer with a peeling toolCut insulation to size with jacket cutterPeel the insulation with a suitable cone cutterDiameter: Ø 8.4 to 22.5 mmCone length: 40-50 mm

The cone cutter for XLPE cables - 70-95 mm² is a specialised tool for conically chamfering the stepped insulation on XLPE-insulated medium-voltage cables. The precise conical cut reduces the push-on forces and enables the safe and voltage-optimised installation of joints and terminations - an indispensable step for reliable connection technology in electrical power distribution.The application is carried out in three structured work steps:Removal of the extruded conductive layer using a suitable peeling deviceCutting the insulation to size with a sheath cutterConical chamfering of the exposed insulation with the appropriate cone cutterThis tool is specially designed for conductor cross-sections of 70 to 95 mm² and ensures an even, smooth bevel that prevents mechanical damage to the cable accessories and simplifies installation.Available from KW Hydraulik - your specialist dealer for professional tools for XLPE cable processing in the medium-voltage network.At a glance:KS cutting tools for conical chamfering of the stepped conductor insulation layer.Processing the conductor layer with a peeling toolCut insulation to size with jacket cutterPeel the insulation with a suitable cone cutterDiameter: Ø12.3 to 25.6 mmCone length: 40-50 mm

The cone cutter SET for XLPE cables - 50-300 mm² consists of high-quality special tools for conically chamfering the stepped conductor insulation layer on XLPE-insulated medium-voltage cables. The precise conical cut ensures a stress-resistant transition between the insulation and cable accessories - a critical step for standard-compliant installation in electrical power distribution. Processing takes place in three structured work steps: Processing the extruded conductive layer with a suitable peeling device Cutting the insulation to size with a suitable sheath cutter Conical chamfering of the insulation with the cone cutter precisely matched to the cable cross-section These cone cutters have been specially developed for cables with a conductor cross-section of 50-300 mm² and ensure an even, smooth cone surface - ideal for voltage-optimised installation of joints and terminations. The tool is robust, easy to use and delivers reproducible results, even under demanding conditions on the construction site. Available from KW Hydraulik - your partner for professional XLPE cable tools and safe installation in the medium-voltage network. At a glance:KS cutting tools for conical chamfering of the stepped conductor insulation layer.Processing the conductor layer with a peeling toolCut insulation to size with sheath cutterPeel the insulation with a suitable cone cutter

The GB-DS1-DRIVE gearbox attachment is the ideal addition to the GB-DS1 and GB-DS1-EVO field stripping devices from GBZ. It enables the hybrid stripping device to be driven electrically using a standard cordless screwdriver - for particularly fast, even and controlled stripping of the conductive layer on XLPE-insulated medium-voltage cables with a diameter of Ø 16-42 mm. Using the GB-DS1-DRIVE significantly reduces the amount of manual labour required. The result: a homogeneous stripping result with greater efficiency and precision - ideal for professional use in network construction, by energy suppliers or in electrical power distribution. A commercially available cordless screwdriver with a recommended speed of less than 1000 rpm is used for the drive. This guarantees safe working and optimum peeling behaviour. If no electric drive is available, the GB-DS1-EVO peeling tool can still be operated manually without any problems.Available from KW Hydraulik - your specialist partner for high-quality peeling technology and tools for XLPE cable processing in the medium-voltage network.Product facts:Gearbox attachment for mounting on DS1 field limit stripping devices.The GB-DS1-DRIVE gearbox is used to drive the GB-DS1-STANDARD or GB-DS1-EVO stripping device using a standard cordless screwdriver. It is used for fast, effective and extremely homogeneous stripping of the conductive layer of medium-voltage cables with a diameter of Ø 16-42 mm.Please use a commercially available cordless screwdriver for the electric drive. Please pay attention to the rotation speed. We recommend a cordless screwdriver speed of less than 1000 rpm for safe working and optimum peeling results.If no electric drive is available, the GB-DS1-EVO hybrid peeler can also be operated manually.Delivery:GB-DS1-DRIVE gearbox attachmentDelivery WITHOUT GB-DS1-EVO peeling device for Ø 16 - 42 mmSupplied WITHOUT Cordless screwdriver

The GB-DS1-EVO is a precise, universal peeling device for removing the extruded semiconductor layer on XLPE-insulated medium-voltage cables with a diameter of Ø 16-42 mm. Developed for use in voltage levels of 10-30 kV (and beyond), the device impresses with maximum smoothness, easy handling and clean peeling results - even with oval or curved cables. The three guide jaws with ball bearings ensure perfect concentricity, while a spring-loaded, adaptable guide jaw enables secure cable guidance even with irregular cross-sections. No use of silicone is required - this reduces effort and contamination. The fine adjustment of the cutting depth allows precise cuts, and a defined end stop ensures a controlled run-out of the tool at the end of the peel. As an option, the GB-DS1-EVO can be combined with the separately available GB-DS1-DRIVE gearbox attachment and operated using a standard cordless screwdriver - ideal for time-saving work in network construction. This high-quality peeling tool is ideal for professional applications in electrical power distribution, e.g. for energy suppliers, network operators or service providers in cable installation. Available from KW Hydraulik - your reliable partner for XLPE stripping technology and tools for medium and high-voltage cable processing. Product facts:GB-DS1-EVO peeling tool for removing the extruded semiconductor layer from Ø16-42 mm cablesA universal tool for peeling off the solid extruded outer conductive layer on medium voltage cables with 10-30 KV and also higher voltage levels. The three guide jaws ensure optimum concentricity of the tools. A spring-mounted guide jaw guarantees that even oval and curved cables can be peeled cleanly and with excellent results. Ball bearings on the guide jaws ensure smooth and easy operation. No silicone is required for lubrication.The cutting depth of the peeling blade can be adjusted via a fine adjustment. At the end of peeling, the appliance runs out cleanly at a previously fixed stop.The peeler can be operated with a standard cordless screwdriver using the optionally available, adaptable GB-DS1-DRIVE drive unit!Delivery:Peeling device for Ø 16 - 42mm

The GB-DS1-STANDARD stripper is a universal tool for the clean removal of the extruded outer conductive layer on XLPE-insulated medium-voltage cables in the diameter range of Ø 16-42 mm. Designed for voltage levels of 10-30 kV, it is also suitable for larger applications and is a proven standard in the field of electrical power distribution. The three stable guide jaws with sliding surfaces ensure precise concentricity on the cable. A spring-loaded guide jaw also adapts to oval or slightly curved cables and enables a clean, even stripping result. The use of silicone as a lubricant is required to minimise friction. The cutting depth of the blade can be finely adjusted so that the tool can be adapted precisely to the respective sheath thickness. A pre-fixed stop at the end of the cable ensures that the tool runs out in a controlled and defined manner - without damaging neighbouring layers. For greater efficiency in use, the tool can be combined with the optionally available GB-DS1-DRIVE gearbox attachment and operated with a standard cordless screwdriver - ideal for longer or recurring applications. Available from KW Hydraulik - your experienced partner for professional tools for XLPE cable processing in the medium voltage range. Product facts:GB-DS1-STANDARD peeling tool for removing the extruded semiconductor layer from Ø16-42 mm cablesA universal tool for peeling off the solid extruded outer conductive layer on medium-voltage cables with 10-30 KV and even higher voltage levels. The three guide jaws ensure optimum concentricity of the tools. A spring-mounted guide jaw guarantees that even oval and curved cables can be peeled cleanly and with excellent results. Sliding surfaces on the guide jaws. Silicone is required for lubrication.The cutting depth of the peeling blade can be adjusted via a fine adjustment. At the end of peeling, the appliance runs out cleanly at a previously fixed stop.The peeler can be operated with a standard cordless screwdriver using the optionally available, adaptable GB-DS1-DRIVE drive unit!Delivery:Peeling tool for Ø16-42mm

The GB-DS2-DRIVE gearbox attachment is the ideal addition to the GB-DS2 and GB-DS2-EVO field stripping devices from GBZ. It enables the hybrid stripping device to be driven electrically using a standard cordless screwdriver - for particularly fast, even and controlled stripping of the conductive layer on XLPE-insulated medium-voltage cables with a diameter of Ø 34-60 mm.Using the GB-DS2-DRIVE significantly reduces the amount of manual labour required. The result: a homogeneous stripping result with greater efficiency and precision - ideal for professional use in network construction, by energy suppliers or in electrical power distribution.A commercially available cordless screwdriver with a recommended speed of less than 1000 rpm is used for the drive. This guarantees safe working and optimum peeling behaviour. If no electric drive is available, the GB-DS2-EVO peeling tool can still be operated manually without any problems.Available from KW Hydraulik - your specialist partner for high-quality peeling technology and tools for XLPE cable processing in the medium-voltage network.Product facts:Gearbox attachment for mounting on DS2 field limit stripping devices.The GB-DS2-DRIVE gearbox is used to drive the GB-DS2-STANDARD or GB-DS2-EVO stripping device using a standard cordless screwdriver. It is used for fast, effective and extremely homogeneous stripping of the conductive layer of medium-voltage cables with a diameter of Ø 34-60 mm.Please use a commercially available cordless screwdriver for the electric drive. Be sure to observe the rotation speed. We recommend a cordless screwdriver speed of less than 1000 rpm for safe working and optimum peeling results.If no electric drive is available, the GB-DS2-EVO hybrid peeler can also be operated manually.Delivery:GB-DS2-DRIVE gearbox attachmentSupplied WITHOUT GB-DS2-EVO peeling device for Ø 34-60 mmSupplied WITHOUT cordless screwdriver

The GB-DS2-EVO is a powerful peeling device for the precise removal of the extruded semiconductor layer on XLPE-insulated medium-voltage cables with a diameter of Ø 34-60 mm. Developed for applications in the 10-30 kV range and beyond, it is ideal for professional use by energy suppliers, network operators and in the field of electrical power distribution. Three stably guided guide jaws with integrated ball bearings guarantee smooth rotation of the device - even with oval or slightly curved cables. A spring-loaded guide jaw also ensures a secure hold and a homogeneous peeling result. Silicone is not required as a lubricant, which makes handling cleaner and more efficient. The cutting depth of the peeling blade can be finely adjusted so that the tool can be precisely adapted to the respective sheath thickness. A fixable end stop ensures a controlled run-out of the tool at the end of the peeling process - for maximum safety and precision. For electric operation, the peeling tool can be combined with a cordless screwdriver using the optional GB-DS2-DRIVE gearbox attachment - ideal for regular use or long cable lengths. Available from KW Hydraulik - your specialist for XLPE stripping technology and professional tools for medium and high-voltage cable processing. Product facts:Peeling tool GB-DS2-Standard for removing the extruded semiconductor layer from cables Ø34-60mmA universal tool for peeling off the solid extruded outer conductive layer on medium voltage cables with 10-30 KV and also higher voltage levels. The three guide jawsensure optimum concentricity of the devices . A spring-mounted guide jaw guarantees that even oval and curved cables are processed cleanly and with very good peeling results. Ball bearings on the guide jaws ensure smooth and easy operation. It is no silicone is required for lubrication.The cutting depth of the peeling blade can be adjusted via a fine adjustment. At the end of peeling, the appliance runs out cleanly at a previously fixed stop.The peeler can be operated with a standard cordless screwdriver using the optionally available, adaptable GB-DS2-DRIVE drive unit!Delivery:Peeling tool for Ø34-60mm

The GB-DS2-STANDARD is a robust and proven stripping tool for removing the extruded semiconductor layer on XLPE-insulated medium-voltage cables with a diameter of Ø 34-60 mm. It is suitable for use in voltage levels from 10 to 30 kV and above, making it a reliable tool for energy suppliers, network operators and service providers in the field of electrical power distribution. Three stable guide jaws with sliding surfaces ensure precise concentricity on the cable. A spring-loaded guide jaw also automatically adapts to oval or curved cables, thus ensuring an even and clean stripping result. The use of silicone as a lubricant is required for smooth operation. The cutting depth can be precisely adjusted by means of a fine adjustment, which enables work that is gentle on the material. At the end of the cable, the device runs out in a controlled manner at a previously fixed end stop - for maximum precision and safety when working on tension-sensitive cable systems. For semi-automatic operation, the device can be combined with the optionally available GB-DS2-DRIVE drive unit and a standard cordless screwdriver - ideal for efficient work on recurring applications. Available from KW Hydraulik - your specialist dealer for professional tools for working on medium-voltage cables in overhead line and network construction. Product facts:Peeling tool GB-DS2-Standard for removing the extruded semiconductor layer from cables Ø34-60mmA universal tool for peeling off the solid extruded outer conductive layer on medium-voltage cables with 10-30 KV and also higher voltage levels. The three guide jawsensure optimum concentricity of the devices . A spring-mounted guide jaw guarantees that even oval and curved cables are processed cleanly and with very good peeling results. Sliding surfaces on the guide jaws. Silicone is required for lubrication.The cutting depth of the peeling blade can be adjusted via a fine adjustment. At the end of peeling, the appliance runs out cleanly at a previously fixed stop.The peeler can be operated with a standard cordless screwdriver using the optionally available, adaptable GB-DS2-DRIVE drive unit!Delivery:Peeling tool for Ø34-60mm

The GB-KS-2-2 peeling tool is the professional solution for precise removal of the extruded semiconductor layer on XLPE-insulated high-voltage cables. Specially developed for applications in the high and extra-high voltage range, the tool enables a uniform, clean cut pattern - without damaging the underlying insulation. Time-consuming reworking such as sanding is reduced to a minimum. The working range covers wire diameters from Ø 40 to 110 mm and therefore covers a wide range of applications for high-voltage cables up to 110 kV. The automatic feed function is controlled via an adjustable upper guide unit, while the device can be flexibly adapted to different diameters - thanks to variably interchangeable roller guides in the lower area. The depth adjustment of the peeling blade is carried out precisely via an adjusting screw with a grid division (0.1 mm per notch), which guarantees fine and reproducible peeling control - ideal for sensitive cable structures. The tool is supplied in a robust transport case with foam padding, protected and ready for use on site. It is particularly suitable for electrical power distribution projects in high-voltage networks - wherever absolute precision is required for cable preparation. Available from KW Hydraulik - your partner for professional tools for XLPE cable processing in the high and medium voltage range. Product facts:For removing the extruded semiconductor layer.Supplied in a transport case with foam padding. Extruded, welded outer conductor layers are easily removed from extra-high voltage cables with cross-linked polyethylene (XLPE) insulation. Subsequent sanding work is reduced to a minimum.Uniform cut pattern on the coreWorking range 40 - 110 mm core diameterAutomatic feed through adjustable setting of the upper guide unitVariable adaptation of the device to different diameters by repositioning the lower roller guidesDepth adjustment of the peeling blade by adjusting screw with grid division (fine adjustment 0.1 mm / grid)

The GB-L20 stripper has been specially developed for the precise removal of the extruded semiconductor layer on XLPE-insulated medium-voltage cables with a diameter of Ø 15 to 49 mm. It is ideal for applications in voltage levels from 10 to 30 kV and is therefore a reliable solution for network operators, energy suppliers and installation teams in electrical power distribution. The tool ensures an even, clean peeling result with a high level of work safety. It is compact, robust and specially designed for use in construction site conditions - whether in overhead line construction, transformer areas or cable installation in stationary networks. The GB-L20 is easy to use and enables controlled depth adjustment so as not to damage the underlying insulation. It is suitable for a wide range of cable types with an extruded conductive layer and offers high repeat accuracy for series production. The tool has roller guides. The use of silicone as a lubricant is not necessary. Available from KW Hydraulik - your specialist partner for professional XLPE stripping technology in the medium voltage range.

The GB-P20 stripping tool is a versatile precision tool for controlled stripping of the extruded outer conductive layer on XLPE-insulated medium-voltage cables in the 10-30 kV range - suitable for cable diameters from Ø 10 to 52 mm. It has been specially developed for professional use by energy suppliers, network operators and cable installation teams in electrical power distribution. The stripping process starts directly at the cable end, the typical stripping dimension is approx. 25 mm. The integrated sliding jaw controls the automatic feed, resulting in a consistently high surface quality. The carbide peeling blade is durable, finely ground and can be manually adjusted and fixed at a depth of 0-1.2 mm in 0.1 mm increments - for maximum control and precise work. The feed plate can be adjusted in five positions for application-specific adjustments.An adjustable handle with two positions improves ergonomics during use. At the end of the peeling process, a precise round cut can be made by simply resetting the sliding jaw - ideal for professional series processing. Available from KW Hydraulik - your specialist dealer for high-quality tools for XLPE cable processing in the medium-voltage network.Product facts:A universal tool for controlled stripping of the firmly extruded outer conductive layeron medium-voltage cables with 10 - 30 KV and higher voltage levels. Working range 10 - 52 mm cable diameter.Stripping starts directly at the cable end, the stripping dimension is approx. 25 mm.The feed rate is predetermined by the sliding jaw and guarantees a consistently good quality of the peeling surface.The peeling blade is ground from carbide, the peeling depth can be set and fixed manually.At the end of the peeling operation, the round cut is achieved by simply resetting the sliding jaw.To achieve optimum peeling results, the feed plate can be adjusted in 5 positions.0 = Radial round cut, 1 = Small feed for larger cable cross-sections and 2 = Large feed for fast and clean work with smaller diameters.with smaller diameters. To improve handling, the handle can be fixed in two different mounting holes.Adjustable peeling depth 0 - 1.2 mm with 0.1 mm fine adjustmentPeeling starts directly at the end of the cableAutomatic work feedFour feed angles, one zero position adjustableSupplied as standard:Cable peelerSilicone pasteSpanner for blade changeOperating instructions

The guide bushes for the stripping tool for overhead lines (ACSR) are precision-manufactured inserts for exact guidance when stripping the aluminium conductor sheath of AL/ST cables. They ensure stable centring of the conductor in the tool, protect the inner conductor (steel core) from damage and guarantee a clean, even peel pattern - essential for the safe installation of connection and end fittings on ACSR overhead lines. The guide bushes are interchangeable and are available in variants suitable for a wide range of common ACSR conductor types from 25/4 mm² to 1055/45 mm². This means they can be precisely matched to the respective aluminium-steel cable and enable high-precision work - even with changing conductor dimensions in mains operation. The guide bushes are specially designed for the associated stripping tool for overhead lines (ACSR) and can be replaced quickly and without tools. Whether for new construction, maintenance or renovation - they offer maximum process reliability and are indispensable for installation teams in electrical power distribution. Available from KW Hydraulik - your specialist for tools for ACSR overhead line processing and grid installation in the medium and high voltage range.Guide bush for removing the aluminium conductor sheath from AL/ST cables.Interchangeable guide bushes, adapted to various aluminium-steel cables

The 25-240 mm² inner sheath cutter set is a precise special tool for stripping the primary insulation of round conductors - especially when preparing ACSR overhead lines in the medium and high voltage range. Thanks to its modular design and easy handling, the set is ideal for use on the construction site, in network construction or in electrical power distribution.The integrated depth stop in the handle enables precise adjustment of the stripping length from 20 to 100 mm, supported by a practical scale for reproducible cutting results. The easily interchangeable peeling attachments cover cross-sections from 25 to 240 mm² - ideal for all common conductor sizes in overhead line construction.With a maximum insulation thickness of 6 mm, a robust case for safe transport and a replaceable blade, this tool is designed for durability, precision and efficiency. It is the ideal solution for network operators, energy suppliers and installation teams who need to professionally process ACSR cables and XLPE-insulated cables.Available from KW Hydraulik - your partner for high-quality tools in energy and overhead line technology.Tool for stripping the primary insulation of round conductorsDepth stop integrated in the handle for setting the stripping lengthAdjustable from 20 to 100 mmScale integrated in the handleEasily interchangeable stripping attachmentsMaximum insulation thickness: 6 mmReplaceable bladeScope of delivery:Handle with length stopSheathing attachment 25, 35, 50, 70, 95, 120, 150, 185 and 240 mm²Carrying caseAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

The 300-500 mm² inner sheath cutter set is specially designed for precise cutting of the primary insulation of large round conductors - ideal for processing ACSR overhead lines and XLPE-insulated high-voltage cables in network construction. It is used in particular where maximum precision and reliable cutting are required - e.g. when working in electrical power distribution.The depth stop integrated in the handle allows the stripping length to be set exactly from 20 to 100 mm, supported by a clearly legible scale for precise repeat accuracy. The interchangeable peeling attachments cover cross-sections of 300, 400 and 500 mm² - perfect for large conductor cross-sections in overhead line construction and for energy suppliers.The tool processes insulation thicknesses of up to 6 mm and has a replaceable blade that ensures clean and controlled cuts. A robust transport case is included for safe and organised use on site.Available from KW Hydraulik - your reliable partner for professional tools for ACSR, XLPE and high-voltage cable processing.Tool for stripping the primary insulation of round conductorsDepth stop integrated in the handle for setting the stripping length Adjustable from 20 to 100 mm Scale integrated in the handle Easily interchangeable stripping attachments Maximum insulation thickness: 6 mm Replaceable bladeScope of delivery:Handle with length stop300, 400 and 500 mm² stripping attachmentCarrying caseAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

The sheath cutter for insulated overhead cables up to Ø 38 mm is a versatile special tool for the safe and clean removal of insulation from sheathed overhead cables in the range from 12.5 to 38 mm cable diameter, 50-300 mm³ conductor cross-section. The tool enables stripping at the cable end as well as targeted removal in the centre of the cable.Designed for efficient and precise manual stripping of the insulation layer of cables.The self-adjusting clamp fits cables from 50-300 mm² and enables smooth stripping.The precise screw mechanism ensures easy manual operation.The high-strength alloy blade remains sharp and durable.Adjustable blade depth for different insulation thicknesses.This precision tool is the ideal solution for network operators, energy suppliers and installation teams in the field of electrical power distribution.Available from KW Hydraulik - your partner for professional tools for all aspects of overhead line technology.Product facts:Easily cuts XLPE - outer sheath and layer sheath. The blade is designed for cutting wall thicknesses of up to 15 mm. Two feed angles and a zero position for the blade can be set. Precise and straight cutting of the jacket is guaranteed. Working range for XLPE single-core cables from 35 mm² 10 KV, up to 500 mm² 30 KV, between 15 and 54 mm cable diameter. The shape of the blade lifts the sheath at the cut point and thus prevents damage to the structural elements. A cutting depth of approx. 70 % is perfectly adequate.► Two functions in one device:► Stripping the outer sheath and stripping the insulation!

The PBT - fully insulated wire stripper, D=10-45 mm is a safe and precise tool for removing the outer sheath from medium and high-voltage cables, especially XLPE-insulated cables in the field of electrical power distribution. Made from high-quality composite material and insulated up to 1000 V in accordance with IEC EN 60900, the pliers offer maximum user protection - even under live conditions. The wire strippers are suitable for cable diameters from 10 to 45 mm and have three circular cutting blades (1.6 mm cutting depth), a longitudinal cutting blade (2.0 mm) and an integrated notching blade, which can be used to spread the insulation in a targeted manner. This enables clean separation of the sheath without damaging the layers underneath. The tool is also suitable for sector conductors and can be equipped with special blades for lead sheaths or customised cutting depths on request - ideal for flexible use by energy suppliers, network operators or in overhead line construction. Available from KW Hydraulik - your specialist partner for insulated tools and professional solutions in XLPE and ACSR cable processing. Product facts:Made of composite material, 1000 volt insulating (IEC EN 60900).For removing the outer sheath.Diameter: cable Ø 10 - 45 mmCutting depth, round: 1.6 mmCutting depth, lengthwise: 2.0 mmEquipment: 3 blades for the round cut, 1 blade for the longitudinal cut, one notched blade for spreading the insulationOther cutting depths can be combined on request.The pliers are also suitable for stripping sector conductors.Blades for lead sheaths are also available on request.

The PBT - fully insulated wire stripper, D=20-55 mm is a reliable special tool for removing the outer sheath from medium and high-voltage cables, particularly in electrical power distribution and overhead line construction. Made of robust composite material and insulating to 1000 volts in accordance with IEC EN 60900, it offers optimum protection for the user when working under voltage. The pliers are designed for cable diameters from 20 to 55 mm and enable precise and gentle stripping with four circular cutting blades (cutting depth 2.0 mm) and one longitudinal cutting blade (cutting depth 2.4 mm). In addition, an integrated notching blade ensures that the insulation can be spread open in a targeted manner - ideal for solid outer sheaths or complex cable structures. Sector conductors can also be processed without any problems. Alternative cutting depths and special blades for lead sheaths are available on request for special requirements - this makes the tool particularly flexible in use. Available from KW Hydraulik - your experienced partner for insulated tools and professional solutions for cable processing in the ACSR and XLPE sector. Product facts:Made of composite material, 1000 volt insulating (IEC EN 60900).For removing the outer sheath.Diameter: cable Ø 20-55 mmCutting depth, round: 2.0 mmCutting depth, lengthwise: 2.4 mmEquipment: 4 blades for the round cut, 1 blade for the longitudinal cut, one notched blade for spreading the insulationOther cutting depths can be combined on request.The pliers are also suitable for stripping sector conductors.Blades for lead sheaths are also available on request.

The CST235 stripper has been specially developed for the precise removal of the extruded semiconductor layer on XLPE-insulated medium-voltage cables with a diameter of Ø 30 to 54 mm. It is ideal for applications in voltage levels from 10 to 30 kV, making it a reliable solution for network operators, energy suppliers and installation teams in electrical power distribution. The tool ensures an even, clean peeling result with a high level of work safety. It is compact, robust and specially designed for use in construction site conditions - whether in overhead line construction, transformer areas or cable installation in stationary networks. The CST235 is easy to use and enables controlled depth adjustment so as not to damage the underlying insulation. It is suitable for a wide range of cable types with an extruded conductive layer and offers a high level of repeat accuracy for series work.The tool has roller guides. The use of silicone as a lubricant is not necessary. Available from KW Hydraulik - your specialist partner for professional XLPE stripping technology in the medium voltage range.