Pile drivers / sheet pile driving / vibratory plates / vibration
Hydraulic pile drivers, vibratory plates & vibratory valves for construction & compaction work. Compatible with excavators up to 65 tonnes. KW Hydraulik offers solutions for foundation & civil engineering.
HM-300-BETON
HM300-BETON - Pile driver with grab for concrete piles for excavators from 2 to 6 tonnes
HM-300-BETON
HM-300-BETON
The HM300-BETON from HYDRA is a hydraulically operated add-on pile driver for excavators from 2 to 6 tonnes. It is specially designed for driving concrete piles and is equipped with an integrated gripper and a centring support.It is operated directly from the excavator cab, enabling one-man operation. The impact force is 3000 kg at a frequency of 2000 min-¹. The hydraulic supply is divided into two circuits: Vibrator operation: 40 l/min at 150 barGrapple control: 10-20 l/min at 150 bar With a dead weight of 320 kg and a grab opening of up to 220 mm, the system is suitable for a wide range of applications in gardening and landscaping, fence construction or foundation construction with concrete piles.
Impact force: 3000 kgFrequency: 2000 min-1Weight: 320 kgMaximum opening of the grab: 220 mmHydraulic vibrator: 40 l/min. at 150 barHydraulic grab: 10-20 l/min. at 150 barRecommended excavator weight: 2 to 6 tonnes
HM-300-Holz
HM300-HOLZ - Attachable pile driver with grapple for logs for excavators from 2 to 6 tonnes
HM-300-Holz
HM-300-Holz
The HM300-HOLZ from HYDRA is a robust add-on pile driver for the efficient driving of timber piles. Developed for attachment to excavators with an operating weight of 2 to 6 tonnes, the system can be fully operated by just one person directly from the cab.Thanks to the integrated gripper and special centring holder for round timber, wooden piles can be guided precisely and driven in in a controlled manner. The pile driver operates with an impact force of 3000 kg and a frequency of 2000 min-¹, achieving a high penetration depth even in compacted soils.The hydraulic requirements are as follows:Vibrator: 40 l/min at 150 barGrapple: 10-20 l/min at 150 bar The maximum grab opening is 220 mm, the total weight is 320 kg.Impact force: 3000 kgFrequency: 2000 min-1Weight: 320 kgMaximum opening of the grab: 220 mmHydraulic vibrator: 40 l/min. at 150 barHydraulic grapple: 10-20 l/min. at 150 barRecommended excavator weight: 2 to 6 tonnes
Discount
%
HY-HPD
HPD - Hydraulic pile driver Ømax=130mm - Pile driver HYCON
HY-HPD
HY-HPD
The HYCON HPD is a powerful hydraulic pile driver for driving posts, profiles, signs, fences and ground anchors with a diameter of up to 130 mm. The compact, mobile device is ideal for use in agriculture and forestry, in gardening and landscaping as well as on construction sites in civil engineering and pipeline construction.The pile driver operates with an oil flow of 30 l/min at a working pressure of 100 bar. The integrated nitrogen pressure accumulator ensures even energy transfer. With flat-face connections (ISO-16028), guide handles and a vibration value of just 9.4 m/s², the device fulfils high ergonomic and safety requirements.Features:Nitrogen pressure accumulatorHose whips with flat-face connections (ISO-16028)Guide handlesOil flow: 30 litres/min.Working pressure: 100 barMax. Pressure relief valve: 160 barSound pressure level 1m: 96 LPA dBVibration level, (3 axes): 9.4 m/s²Possible optional accessories:HY-HPD adapter1: 65x65 mmHY-HPD adapter2: 110x110 mmHY-HPD adapter3: D=60 mmHY-HPD adapter4: D=80 mmHY-HPD adapter5: D=105 mmHY-HPD adapter6: D=130 mm
Discount
%
HY-HPD-RV
HPD-RV - Hydraulic pile driver with remote release Ømax=130mm - Pile driver HYCON
HY-HPD-RV
HY-HPD-RV
This hydraulically operated pile driver from HYCON is designed for the powerful driving of stakes, profiles, fences, signs and ground anchors with a diameter of up to 130 mm. It is used wherever robust and reliable technology is required, for example in forestry operations, gardening and landscaping or on construction sites in the general construction industry. The integrated remote release and the ergonomically arranged guide handles facilitate handling in daily use. A nitrogen pressure accumulator ensures even impact transmission, while the flat-face hydraulic connections (in accordance with ISO-16028) enable a secure and drip-free connection.
Features:Nitrogen accumulatorRemote release, hose whips with flat-face connections (ISO-16028)Guide handlesOil flow: 30 litres/min.Working pressure: 100 barMax. Pressure relief valve: 160 barSound pressure level 1m: 96 LPA dBVibration level, (3 axes): 9.4 m/s²Possible optional accessories: HY-HPD adapter1: 65x65 mmHY-HPD adapter2: 110x110 mmHY-HPD adapter3: D=60 mmHY-HPD adapter4: D=80 mmHY-HPD adapter5: D=105 mmHY-HPD adapter6: D=130 mm
HVB350/18-60
HVB350/18-60 - Hydraulically driven vibratory pump for mounting on excavators 4-10 tonnes, 60 l/min
HVB350/18-60
HVB350/18-60
The pump generates a pulsation (oscillating movement) in the hydraulic circuit on the bucket cylinder of the excavator. As a result, only the front structure on the excavator vibrates after the cylinder. The mechanics of the arm are protected and your excavator is transformed into a multifunctional tool.This allows you to, for exampleLoosen and break up frozen/compacted soilsoil compactionDrive in pilesCut asphaltHydraulics:Oil volume: 60 l/minWorking pressure: max. 350 barVibration frequency: 23 HzVolume change: 18 cm³Weight: 13 kg
HVB350/27-80
HVB350/27-80 - Hydraulically driven vibration pump for mounting on excavators 7-20 tonnes, 80 l/min
HVB350/27-80
HVB350/27-80
The pump generates a pulsation (oscillating movement) in the hydraulic circuit on the bucket cylinder of the excavator. As a result, only the front structure on the excavator vibrates after the cylinder. The mechanics of the arm are protected and your excavator is transformed into a multifunctional tool.This allows you to, for exampleLoosen and break up frozen/compacted soilsoil compactionDrive in pilesCut asphaltHydraulics:Oil volume: 80 l/minWorking pressure: max. 350 barVibration frequency: 19 HzVolume change: 27 cm³Weight: 13 kg
HVB350/9-40
HVB350/9-40 - Hydraulically driven vibratory pump for mounting on excavators 0-5 tonnes, 40 l/min
HVB350/9-40
HVB350/9-40
The pump generates a pulsation (oscillating movement) in the hydraulic circuit on the bucket cylinder of the excavator. As a result, only the front structure on the excavator vibrates after the cylinder. The mechanics of the arm are protected and your excavator is transformed into a multifunctional tool.This allows you to, for exampleLoosen and break up frozen/compacted soilsoil compactionDrive in pilesCut asphaltHydraulics:Oil volume: 40 l/minWorking pressure: max. 350 barVibration frequency: 30 HzVolume change: 9 cm³Weight: 13 kg
HVD18/55-24
HVD18/55-24 - Hydraulically driven vibration pump for mounting on machines, 24 l/min
HVD18/55-24
HVD18/55-24
The pump generates a pulsation (oscillating movement) in the hydraulic circuit of attachments/shovels or similar.This enables you to, for example Loosen and break up frozen/compacted soilsoil compactionDrive in pilesCutting asphaltHydraulics:Oil volume: max. 24 l/minWorking pressure: max. 210 barVibration force: max. 18 kNVibration frequency: max. 55 HzWeight 13 kg
HVD70/35-100
HVD70/35-100 - Hydraulically driven vibration pump for mounting on machines, 100 l/min
HVD70/35-100
HVD70/35-100
The pump generates a pulsation (oscillating movement) in the hydraulic circuit of attachments/shovels or similar.This enables you to, for example Loosen and break up frozen/compacted soilsoil compactionDrive in pilesCutting asphaltHydraulics:Oil volume: max. 100 l/minWorking pressure: max. 210 barVibration force: max. 70 kNVibration frequency: max. 35 HzWeight 40 kg
Discount
%
HY-HPD-Adapter1
Hydraulic pile driver / pile driver adapter 1 for HY-HPD and HY-HPD-RV
HY-HPD-Adapter1
HY-HPD-Adapter1
Square holder 65 x 65 mm for HY-HPD and HY-HPD-RV
Discount
%
HY-HPD-Adapter2
Hydraulic pile driver / pile driver adapter 2 for HY-HPD and HY-HPD-RV
HY-HPD-Adapter2
HY-HPD-Adapter2
Square support 110 x 110 mm for HY-HPD and HY-HPD-RV
Discount
%
HY-HPD-Adapter3
Hydraulic pile driver / pile driver adapter 3 for HY-HPD and HY-HPD-RV
HY-HPD-Adapter3
HY-HPD-Adapter3
Round holder Ø 60 mm for HY-HPD and HY-HPD-RV
Discount
%
HY-HPD-Adapter4
Hydraulic pile driver / pile driver adapter 4 for HY-HPD and HY-HPD-RV
HY-HPD-Adapter4
HY-HPD-Adapter4
Round Ø 80 mm for HY-HPD and HY-HPD-RV
Discount
%
HY-HPD-Adapter5
Hydraulic pile driver / pile driver adapter 5 for HY-HPD and HY-HPD-RV
HY-HPD-Adapter5
HY-HPD-Adapter5
Round holder Ø 105 mm for HY-HPD and HY-HPD-RV
Discount
%
HY-HPD-Adapter6
Hydraulic pile driver / pile driver adapter 6 for HY-HPD and HY-HPD-RV
HY-HPD-Adapter6
HY-HPD-Adapter6
Round holder Ø 130 mm for HY-HPD and HY-HPD-RV
MALAGUTI PLURY W1
MALAGUTI PLURY W1 - Vibratory drive system with an oscillating mass
MALAGUTI PLURY W1
MALAGUTI PLURY W1
The vibratory drive systems in the MALAGUTI PLURY W1 series are compact, hydraulically operated units with a vibrating mass. Designed for versatile use in professional civil engineering, gardening and landscaping as well as foundation and pipeline construction, their multifunctionality allows them to be used for pre-excavation, compaction or cutting, depending on the accessories selected.The operation is simple, the performance impressive: high centrifugal forces, reliable frequency values and efficient hydraulic operation enable precise work results even under demanding conditions. The different model variants differ in centrifugal force, frequency, hydraulic power and weight - and can be optimally adapted to the respective requirements. You can also find suitable accessories for the PLURY W1 series in our online shop.VIBRATION DRIVE You can compact, pre-drill and cut with a single machine.Multifunctional accessoriesLarge selection of accessoriesVersatile vibratory drive with one massTechnical data:Centrifugal force: Vibration frequency: Hertz: Oil flow rate: Pressure: Weight:
MALAGUTI PLURY W2
MALAGUTI PLURY W2 - Vibratory drive system with two oscillating masses
MALAGUTI PLURY W2
MALAGUTI PLURY W2
VIBRATION DRIVE You can compact, pre-drill and cut with a single machine.Multifunctional accessoriesLarge selection of accessoriesVersatile vibratory drive with one massTechnical data:Centrifugal force: Vibration frequency: Hertz: Oil flow rate: Pressure: Weight:
MALAGUTI PILEFIX LIGHT
PILEFIX LIGHT - Vibro sheet pile driver
MALAGUTI PILEFIX LIGHT
MALAGUTI PILEFIX LIGHT
Suitable for driving and extracting sheet piles in various soil typesLightweight design Technical data:- Weight: - Oil flow rate: - Pressure: - Vibration frequency: - Centrifugal force: - Torque: - Hertz:
MALAGUTI PILEFIX STRONG
PILEFIX STRONG - Vibro sheet pile driver
MALAGUTI PILEFIX STRONG
MALAGUTI PILEFIX STRONG
Suitable for driving and extracting sheet piles in various soil typesHeavy-duty design Technical data:- Weight: - Oil flow rate: - Pressure: - Vibration frequency: - Centrifugal force: - Torque: - Hertz:
MALAGUTI PILEFIX TILT
PILEFIX TILT - Vibro sheet pile driver with tilting function
MALAGUTI PILEFIX TILT
MALAGUTI PILEFIX TILT
Suitable for driving and extracting sheet piles in various soil typesSwivelling design Technical data- Weight: - Oil flow rate: - Pressure: - Vibration frequency: - Centrifugal force: - Torque: - Hertz:
MALAGUTI ABSORBER
PLURY ABSORBER - Shock absorber for centring bell
MALAGUTI ABSORBER
MALAGUTI ABSORBER
The MALAGUTI PLURY ABSORBER is a shock-absorbing rubber element for centring bells in pile driving applications. Developed to reduce the effects of impact during the vibro-driving of concrete piles, the damper reliably protects against material damage and increases the longevity of the piles.The accessory is specifically compatible with MALAGUTI PLURY vibratory drives in conjunction with the GRAPPLE timber grapple for pile drivers. The simple integration into existing systems makes the absorber the ideal addition for professional applications in fence, foundation and pipeline construction.Available in the following versions:150 × 150 mm / 8-40200 × 200 mm / 8-40250 × 250 mm / 8-40300 × 300 mm / 8-40350 × 350 mm / 8-40Accessories and expansion components for MALAGUTI PLURY can be found in our MALAGUTI brand shop.
MALAGUTI BELL
PLURY BELL - Centring bell for PLURY vibratory drive system
MALAGUTI BELL
MALAGUTI BELL
The PLURY BELL centring bell has been specially designed for use with MALAGUTI PLURY vibratory drive systems and ensures precise centring and vertical guidance of the pile when driving wooden, concrete or steel piles.The precise support keeps the pile stable and enables controlled driving with minimum load on the material. Depending on the equipment, the bell is compatible with carriers from 4 tonnes to 40 tonnes and is therefore ideal for applications in fence construction, foundation construction or when installing fencing.Available sizes / centring:150 × 150 mm / 1-4.5150 × 150 mm / 4-12150 × 150 mm / 8-40200 × 200 mm / 1-4.5200 × 200 mm / 4-12200 × 200 mm / 8-40250 × 250 mm / 4-12250 × 250 mm / 8-40300 × 300 mm / 8-40350 × 350 mm / 8-40 Further accessories for the PLURY vibratory drive can be found in our brand shop.Developed for vibro-driving wooden, concrete and steel postsCentres the post and makes it easier to drive in vertically
Discount
%
MALAGUTI BELL CONCRETE
PLURY BELL CONCRETE - Bell for centring steel reinforcements for concrete piles Ø650mm
MALAGUTI BELL CONCRETE
MALAGUTI BELL CONCRETE
The PLURY BELL CONCRETE is a specially developed centring device for the precise guidance of steel reinforcement when driving concrete piles with steel cages. The bell centres the reinforcement cage during the vibration process and thus ensures safe, even penetration into the ground without deforming or misaligning the reinforcement.This version is designed for combination with MALAGUTI PLURY vibratory drives models W2-60.0, W2-80.0, W2-100.0, W2-120.0, W2-150.0 and W2-180.0. With an internal dimension of Ø 650 mm, the bell is ideal for large-format reinforcement elements in civil engineering and foundation construction.
MALAGUTI PLATE
PLURY PLATE - Compressor plate for vibratory drive
MALAGUTI PLATE
MALAGUTI PLATE
The PLURY PLATE compactor plate has been specially developed for use with the MALAGUTI PLURY vibratory drive and enables the professional compaction of a wide variety of surfaces, including trenches, soils, steep walls and hard-to-reach areas.The combination of high vibratory energy and precise plate guidance creates a homogeneous, load-bearing surface that can withstand even intensive loads in the long term. The design also allows work to be carried out in difficult positions, e.g. on slopes or narrow working areas.Available in a wide range of sizes, the compactor can be optimally adapted to the respective application requirements - from inner-city pipeline construction to surface compaction in large-scale projects.Further attachment accessories for compaction and ramming can be found in the MALAGUTI brand shop.
Pile drivers, vibratory plates and vibration
Pile drivers, vibratory plates and vibratory pumps are perfect for the construction industry to prepare foundations and other structures. With our wide range of pile drivers, vibratory plates and vibratory pumps, you will find innovative solutions for your construction and pile driving work.
Pile drivers and vibratory plates
Our pile drivers and vibratory plates are the perfect choice for preparing the ground for foundations, piles and other structures. Find out more about our range:
Add-on pile drivers
Our mounted pile drivers are designed to drive piles into the ground efficiently and are compatible with a wide range of excavators. They offer maximum performance and precision.
Add-on vibratory plates/compactors
Our add-on vibratory plates and compactors are the ideal solution for compacting the soil and ensuring a stable foundation. They are versatile and offer first-class results.
Vibratory pumps/valves
Our vibratory pumps and valves are essential equipment for excavators and backhoe loaders. Find out more about the different models:
- HC Series vibratory plates: with 8 models for excavators from 0.8 to 38 tonnes and plate weights from 110 to 1150 kg, these vibratory plates offer first-class performance and versatility.
- STANLEY HSX series vibratory plates: This series comprises 4 models for excavators from 2.2 to 65 tonnes and a plate weight of 168 to 998 kg. They offer outstanding results for demanding tasks.
HYDRA pile drivers
Our HYDRAHAMMER HMP series pile drivers are available for excavators from 2 to 20 tonnes and offer a pile weight of 320 to 1000 kg. They are perfect for driving piles and piers.
DYNASET vibratory valves
Our HVB series DYNASET vibratory valves are mounted on the bucket cylinder and generate pulsating vibrations. The valve starts when the oil circuit is switched on:
- DYNASET HVD series - Directional vibra loader: This valve is mounted on the tool (e.g. bucket) and generates a strong impact at 50 Hz / 70 kN.
- DYNASET HVC series - vibratory plates: These valves require HVD for actuation and are ideal for vibratory plates.
- DYNASET Series HRC - Hydraulic reversal cylinder: These valves generate a sawing motion at 5 Hz / 16 kN and are mounted on tools.
Post pullers
Our post extractors are specially designed to remove posts safely and efficiently.
At KW Hydraulik, we offer you first-class solutions for your pile driving and vibration requirements. Our products are designed for quality and performance, allowing you to realise your construction projects smoothly. Contact us to learn more about our products and find the ideal solution for your project.