Sheet perforator for material thickness t < 3 mm

The sheet metal punches from KW Hydraulik are the ideal solution for precise, burr-free punching of sheet metal and plastics in areas such as car body construction, switch cabinet production or stainless steel kitchens. The revised cutting geometry reduces the cutting pressure, minimises the effort required and extends the service life of the tool and hydraulic components. Suitable for manual or hydraulic operation - with connection thread M19 (3/4" UNF). The use of a hydraulic tool is recommended for cut-outs from 26×26 mm in ST37. Available sizes: Rectangular and square holes from 22×22 mm to 138×138 mm At a glance:For manual and hydraulic operation.The sheet metal punching system for effortless, fast and burr-free punching of sheet metal and plastics.The newly developed cutting geometry allows you to work with less effort thanks to reduced cutting pressure requirements. Material wear is significantly reduced. The loads on the hydraulic seals are significantly reduced. Connection thread M 19 mm (3/4 "UNF) Note From 26x26mm for ST37 we recommend the use of hydraulic tools.The friction in the thread of hand-operated perforations (with hexagon head screw) is so strong that the lag screw is worn out after repeated operation. We therefore do not provide any guarantee for the draw bolt.There is no friction with hydraulically actuated tie rods. They are therefore suitable for continuous use.

The ABL2 is a compact and powerful battery-powered hydraulic sheet metal punch for professional applications in car body, switch cabinet or plant construction. The 360° rotatable tool head enables flexible working even in hard-to-reach places. With the proven 18 V Li-Ion MAKITA technology, this tool offers maximum mobility and reliability - even in confined spaces. Compatible with tools from ALFRA, HÄWA and GREENLEE, the ABL2 is perfect for punching sheet steel, stainless steel (VA) and plastic. The robust design enables punching up to the following maximum values: Ø 96 mm in sheet steel (t = 2 mm) Ø 64 mm in sheet steel (t = 3 mm) Ø 64 mm in VA sheet metal (t = 2 mm) Suitable for:Perforator for sheet steel up to Ø 96 mm (POWERsplit)Perforator for stainless steel up to Ø 63.5 mm (POWERsplit VA)Developed for maximum efficiency - whether on the construction site or in the workshop.Discover now at KW Hydraulik. At a glance:360° swivelling headCompatible with ALFRA, HÄWA and GREENLEEFor punching sheet steel, stainless steel and plastic- Ø 96 mm in sheet steel t = 2 mm- Ø 64 mm in sheet steel t = 3 mm- Ø 64 mm in VA sheet metal t = 2 mm18 volt MAKITA Li-Ion battery and MAKITA chargerScope of delivery: - Hole punch ABL2-M18V- Pull axle 19x130 mm - Pull axle 9.5x70 mm - Adapter 19x9.5 mm- Carrying case - MAKITA battery and charger The following tools can be used:- Round hole tools for ST37 / t=2mm: max. D=96 mm- Round hole punching tools for ST37 / t=3mm: max. D=63 mm- Round hole punching tools for VA / t=2mm: max. D=63 mm

Sheet metal hole punching attachment with 3/8" UNF thread compatible with ALFRA, GREENLEE and HÄWA sheet metal punchers.All-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

The BLHH4 is a versatile hand-hydraulic sheet metal punch with integrated pump - ideal for precise cut-outs in sheet steel, stainless steel and plastic with material thicknesses of up to 3 mm. The tool head can be rotated 360° in three axes, offering maximum manoeuvrability even in confined spaces. Thanks to its compatibility with tools from ALFRA, HÄWA and GREENLEE, the BLHH4 is ideal for use in switch cabinet construction, car bodywork or when machining stainless steel housings. Performance data: Ø 82 mm in sheet steel t = 2 mm Ø 63 mm in sheet steel t = 3 mm Ø 63 mm in VA t = 2 mm Suitable accessories: Round perforator for sheet steel up to Ø 96 mm Round perforator for VA up to Ø 63.5 mm Discover now at KW Hydraulik - your partner for professional sheet metal working tools. Integrated hydraulic pumpCompatible with ALFRA, HÄWA and GREENLEEFor punching sheet steel, stainless steel and plasticThe head can be rotated 360° in three axes, this high degree of manoeuvrability allows you to effortlessly reach any area to be processedScope of delivery: - BLHH-4 hole punch- Pull axis 19x130 mm - Pull axis 9.5x70 mm - Adapter 19x9.5 mm- Case The following tools can be used: Round hole tools for ST37 / t=2mm: max. D=82 mmRound hole tools for ST37 / t=3mm: max. D=63 mmRound hole tools for VA / t=2mm: max. D=63 mm

Versatility for up to 15 applicationsThe BPP063 cordless hydraulic MULTITOOL from STANLEY-DUBUIS is a powerful, versatile tool with 62 kN pressing force and two-stage hydraulics with fast feed, which is suitable for up to 15 different applications. Thanks to the robust quick-release coupling, the various tool inserts can be changed quickly and safely, while the swivelling holder offers maximum flexibility.The impact-resistant housing with two-component handle ensures comfortable handling, while the USB interface for data readout and the automatic pressure cut-off ensure a high level of process reliability. The powerful 18V / 5 Ah lithium-ion battery from DEWALT is included as standard; batteries up to 18V / 12 Ah are available as an option.The BPP063 is supplied in an extremely hard-wearing case, including battery and charger, but without inserts - these are available for various applications such as pressing, cutting, punching, bolt and nut cutting or straightening contact wires.Pistol-shaped, heavy-duty design with fast feed (two-stage hydraulics)Robust and durable quick coupling for holding the various tool inserts. DEWALT18 volt / 5 Ah lithium-ion battery and XR series charger supplied.Batteries up to 18 Volt / 12 Ah are available as an option.The inserts can be rotated in the holder.Impact-resistant housing with two-component handle for perfect handlingSupplied in an extremely hard-wearing caseAutomatic switch-off after reaching the maximum pressure (pressure relief valve)USB interface for data readoutForce: 62 kNStroke: 38 mmDimensions: 295x86x335 mmWeight: 3.95 kgScope of delivery:Battery-powered hydraulic combi tool,incl. one battery, charger and case,without interchangeable tool insertsAvailable tool inserts:XPM-062 compact, closed press head with hinged lock for pressing even in confined areas.For "60-CK" series press inserts, compatible with "KLAUKE Series 22", "DUBUIS D62" series insertsCrimping force 62 kN, enables crimping of:max. 300 mm² copper cable lugs to DIN 46235max. 300 mm² aluminium XCM-050 - open cutting head Ø50mm for CU and AL cablesXGM-025 - closed cutting head Ø25mm for aluminium-steel cables (ACSR) - overhead lineXHM-062 - Punch for perforators with 3/4 "UNF mounting thread,compatible with sheet metal punches of the brands GREENLEE, ALFRA, ...max. Ø96mm in sheet steel 2mmXCMDIN - Profile rail cutting insert for DIN mounting railsTS15x35mm, TS7.5x35mm, TS5x15mmG-railCU 3x10mm, CU 3x25mmSlotted hole insert M6XCMSTRU - Profile rail cutting insert for STRUT support rails41x41mm and 41x21mmXCM008 - Bolt cutter up to Ø8mmCutting head available in three different versions: curved, straight, flush cuttingIdeal for cutting fasteners such as lag screws, screws, L-shaped hooks and nails. XPM061 - compact, open crimping head for crimping in tight spaces. For press inserts series "60-D" DIN 48083-6M, compatible with inserts from the "KLAUKE series 18", "DUBUIS D61" series Crimping force 62 kN, enables crimping of: max. 185 mm² copper cable lugs to DIN 46235 max. 185 mm² aluminium XPM060F - closed four-pin crimping head, does not require interchangeable crimping inserts.Crimping force: 62 kNmax. 400 mm² copper commercially available standard cable lugsmax. 300 mm² aluminium commercially available standard cable lugsXPM130D - compact, closed crimping head with hinged closure.For "130-C" series crimping inserts, compatible with "KLAUKE Series 13" and "DUBUIS C130" inserts Crimping force 130 kN, enables crimping of: max. 300 mm² copper cable lugs to DIN 46235 max. 300 mm² aluminium XDM041 - Contact wire straightener for contact wires from 107-150 mm²Eliminates kinks in the contact wireForce: 40 kNXCMNUT - Nut splitter M8 to M12Force: 43 kNXGMTRC - Threaded rod cutter M6 to M12Force: 60 kNXGMCAT - Contact wire cutter for 102, 120 and 150 mm²Stroke: 27 mmForce: 60 kNXCMTRAY - Mesh cable duct cutter up to Ø6mmfor cutting the grid bars

Special set for overhead line constructionThe BPP063-Set1 cordless hydraulic MULTITOOL from STANLEY-DUBUIS has been specially developed for overhead line construction and combines a powerful 62 kN pressing force with a wide range of applications. Thanks to the two-stage hydraulics with fast feed, it enables fast and precise work processes, while the robust quick-release coupling allows the tool inserts to be changed quickly.This set contains two powerful tool inserts:XPM-062 compact, closed crimping head with flip lock, ideal for confined work areas. Compatible with KLAUKE and DUBUIS inserts, it enables crimping of copper and aluminium cables up to 300 mm².XGM-025 closed cutting head with 25 mm diameter, especially for cutting aluminium-steel cables (ACSR) in overhead line construction. The folding head with precise blade guidance ensures clean cuts with minimum effort.The impact-resistant housing with two-component handle ensures safe handling, while the USB interface enables simple data evaluation. The powerful 18V / 5 Ah lithium-ion battery from DEWALT ensures maximum mobility; batteries up to 18V / 12 Ah are available as an option.The set is supplied in an extremely hard-wearing case, including battery, charger and the two tool inserts - perfect for professional use in power supply and electrical installation. Pistol shape, heavy-duty design with fast feed (two-stage hydraulics) Robust and durable quick-release coupling for holding the various tool inserts. DEWALT18 volt / 5 Ahlithium-ion battery and XR series chargers are included.Batteries up to 18 Volt / 12 Ah are available as an option.The inserts can be rotated in the holder.Impact-resistant housing with two-component handle for perfect handlingXCM025 - Ø25 mm cutting head for ACSR cablesFolding head with precise blade guide, cutting force: 62 kNSupplied in an extremely hard-wearing caseAutomatic switch-off after reaching the maximum pressure (pressure relief valve)USB interface for data readoutForce: 62 kNScope of delivery:Battery-powered hydraulic combi tool, incl. one battery, charger and case, XPM-062 compact, closed crimping head with hinged lock for crimping in tight spaces. For "60-CK" series pressing inserts, compatible with the "KLAUKE Series 22" and "DUBUIS D62" series inserts. Crimping force 62 kN, enables crimping of: max. 300 mm² copper cable lugs to DIN 46235, max. 300 mm² aluminium XGM-025 - closed cutting head Ø25mm for aluminium-steel cables (ACSR) - overhead line

The PowerSplit round sheet metal punches are the ideal solution for precise and burr-free punching of sheet steel (S235) up to 2 mm and plastic up to 3 mm thick. Thanks to the split punch design, the force required for punching is significantly reduced, making it particularly efficient to use with hand or hydraulically operated tools. The connection is made via an M 9.5 mm (3/8" UNF) thread, which is compatible with many standard drawbars.The punches are available in diameters from 15.2 mm to 63.5 mm and are ideal for applications in car body construction, switch cabinet production or industrial sheet metal processing. They are the perfect match for tools such as the ABL2 cordless sheet metal punch or the BLHH4 hand-held hydraulic sheet metal punch.Further solutions for sheet metal processing can be found at KW Hydraulik or in the Steel construction & sheet metal processing application area.At a glance:Splitting punch design, for manual and hydraulic operation.Connection thread for the pulling axis; M19 mm (3/4 "UNF)ST-37 up to 3 mm material thicknessPlastics up to 3 mm material thickness

The PowerSplit-Plus round perforator is specially designed for precise and burr-free perforation of stainless steel sheet (VA/INOX) up to a material thickness of 3 mm. The robust splitting punch design ensures a particularly reduced cutting pressure - ideal for use with manual or hydraulic tools. The connection is made via an M 19 mm (3/4" UNF) thread, suitable for high-performance pulling axles.With a hole diameter of 15.2 mm (PG9), this sheet metal perforator is ideal for use in switch cabinet production, industrial stainless steel processing or high-quality housing production.The PowerSplit-Plus can be optimally combined with the ABL2 cordless sheet metal punch or the BLHH4 manual hydraulic sheet metal punch and offers reliable performance under maximum material stress.Further sheet metal processing solutions can be found at KW Hydraulik in the steel construction and housing production application area.Slitting punch design, for manual and hydraulic operation.Connection thread for pull axis M 11.1 mm (7/16" UNF) VA up to 2 mm material thickness

The XHM062 hole punching head is a powerful attachment for hydraulic combination tools such as the DUBUIS MULTITOOL BPP063 and the BPL063. With a punching force of 62 kN, it is ideal for precise and efficient punching of steel and stainless steel sheets. The punching head is designed for sheet metal punches with a 3/4" UNF (~M19) pull shaft thread and is supplied including pull shafts in the sizes 19×120 mm, 9.5/16×105 mm and 11.1/19×105 mm. This allows round holes up to Ø 120 mm and square holes up to 92×92 mm to be punched reliably. The compact design(Ø54×120 mm) and low weight of just 1.0 kg ensure particularly easy handling - even in hard-to-reach work areas. You can find more accessories and suitable devices directly at KW Hydraulik in the steel and sheet metal processing application area. For sheet metal punches with 3/4 "UNF (~M19) pull shaft thread incl. pull shafts: 19x120 mm, 9.5/16x105 mm, 11.1/19x105 mm for round holes up to Ø 120 mm for square holes up to 92x92 mm Dimension: Ø54x120 mm Weight: 1.0 kg Suitable tools: BPL063 - Combination tool, 63 kN bar shape BPP063 - Combination tool, 63 kN, pistol shape