Hole punching

The sheet metal punches from KW Hydraulik are the ideal solution for precise, burr-free punching of sheet metal and plastics in areas such as car body construction, switch cabinet production or stainless steel kitchens. The revised cutting geometry reduces the cutting pressure, minimises the effort required and extends the service life of the tool and hydraulic components. Suitable for manual or hydraulic operation - with connection thread M19 (3/4" UNF). The use of a hydraulic tool is recommended for cut-outs from 26×26 mm in ST37. Available sizes: Rectangular and square holes from 22×22 mm to 138×138 mm At a glance:For manual and hydraulic operation.The sheet metal punching system for effortless, fast and burr-free punching of sheet metal and plastics.The newly developed cutting geometry allows you to work with less effort thanks to reduced cutting pressure requirements. Material wear is significantly reduced. The loads on the hydraulic seals are significantly reduced. Connection thread M 19 mm (3/4 "UNF) Note From 26x26mm for ST37 we recommend the use of hydraulic tools.The friction in the thread of hand-operated perforations (with hexagon head screw) is so strong that the lag screw is worn out after repeated operation. We therefore do not provide any guarantee for the draw bolt.There is no friction with hydraulically actuated tie rods. They are therefore suitable for continuous use.

The 9008 hydraulic power unit was specially developed for use with IMB MULTIFOR devices and impresses with its robust design and precise performance. Equipped with a high-precision radial piston pump and a low-maintenance electric motor in an oil bath, it delivers reliable hydraulic power even under demanding conditions. An integrated pressure switch ensures automatic switch-off and return as soon as the preset working pressure is reached. It is conveniently controlled via the integrated foot pedal or optionally by remote control. Thanks to the 24V control, protractor socket and earthed socket, the unit is versatile and safe to operate. The scope of delivery includes everything you need for immediate use: 2.5 m hydraulic hose, socket and connection cable - ready for connection and immediate operation. Available from KW Hydraulik - your specialist for high-quality and practice-orientated hydraulic solutions. Equipped with:Motor protection switchBuilt-in control pedalPressure switch with adjustable electrical contacts, which stops automatically when the pressure is reached and the cylinder is then retractedElectronic protractor socketProtective housing socketPedal socket for remote control24V DC controlsComplete and ready for use, equipped with 2.5 m hose, sleeve and protective contact socket.

The ABL2 is a compact and powerful battery-powered hydraulic sheet metal punch for professional applications in car body, switch cabinet or plant construction. The 360° rotatable tool head enables flexible working even in hard-to-reach places. With the proven 18 V Li-Ion MAKITA technology, this tool offers maximum mobility and reliability - even in confined spaces. Compatible with tools from ALFRA, HÄWA and GREENLEE, the ABL2 is perfect for punching sheet steel, stainless steel (VA) and plastic. The robust design enables punching up to the following maximum values: Ø 96 mm in sheet steel (t = 2 mm) Ø 64 mm in sheet steel (t = 3 mm) Ø 64 mm in VA sheet metal (t = 2 mm) Suitable for:Perforator for sheet steel up to Ø 96 mm (POWERsplit)Perforator for stainless steel up to Ø 63.5 mm (POWERsplit VA)Developed for maximum efficiency - whether on the construction site or in the workshop.Discover now at KW Hydraulik. At a glance:360° swivelling headCompatible with ALFRA, HÄWA and GREENLEEFor punching sheet steel, stainless steel and plastic- Ø 96 mm in sheet steel t = 2 mm- Ø 64 mm in sheet steel t = 3 mm- Ø 64 mm in VA sheet metal t = 2 mm18 volt MAKITA Li-Ion battery and MAKITA chargerScope of delivery: - Hole punch ABL2-M18V- Pull axle 19x130 mm - Pull axle 9.5x70 mm - Adapter 19x9.5 mm- Carrying case - MAKITA battery and charger The following tools can be used:- Round hole tools for ST37 / t=2mm: max. D=96 mm- Round hole punching tools for ST37 / t=3mm: max. D=63 mm- Round hole punching tools for VA / t=2mm: max. D=63 mm

OGURA HPC-156WDF cordless hydraulic hole punch - Compact, powerful and preciseThe OGURA HPC-156WDF is one of the lightest cordless hydraulic hole punches on the market - ideal for precise work directly on site. Weighing just 7.9 kg including battery, it offers maximum mobility without compromising on performance. The punch is designed for material thicknesses up to 6 mm (S275) and enables clean round and oblong hole punching with high repeat accuracy.Thanks to a punching force of 83.3 kN and a punching time of just 4 seconds, it is an extremely efficient solution for processing flat and sectional steel - even with stainless steel up to 6 mm thick. The jaw depth of 25 mm allows flexible working even in hard-to-reach places.The power supply is provided by an 18 V Li-ion battery, which means that the device can be operated completely independently of the mains - ideal for use on the construction site or in confined workshop conditions. Matching slotted hole inserts, punches and dies are also available.Technical highlights at a glance: OGURAHPC-156WDF - Our lightest cordless hole punch with only 7.9 kg incl. battery.Die depth: 25 mm Punching force: 83.3 kNPunching capacity up to DIN S275 Round hole Ø 4.0 - 15.0 mm Slotted hole 6.5 x 10.0 to 11.0 x 16.5 mm Material thickness 2.0 - 6.0 mm Punching capacity for stainless steel Round hole Ø 6.5 - 15.0 mm Material thickness 3.0 - 6.0 mm Punching time: 4 secondsMotor: 18 Volt DC Li-ion batteryDimensions (L x W x H): 390 x 115 x 293 mmWeight: 7.9 kgdelivery:- HPC-156WDF-M18V- MAKITA 18V/3Ah battery- MAKITA charger- Carrying caseReplaces Handypress HPC-615.

Battery-powered hydraulic hole punch OGURA HPC-N209WDF - Powerful and mobile up to 9 mm material thicknessThe OGURA HPC-N209WDF is a robust cordless hydraulic hole punch for professional use on steel components up to 9 mm thick. Weighing just 11.3 kg including battery, it is ideal for mobile use on construction sites or in workshops.With a punching depth of 40 mm and a punching time of just 4 seconds, it reliably processes round holes up to Ø 20 mm and slotted holes up to 14.0 x 21.0 mm - even in stainless steel. The powerful 18V Li-Ion battery ensures cordless operation without the need for a compressor or mains connection.Optional accessories such as matching slotted hole inserts, punches and dies as well as the compatible Makita 18V battery are available separately.Technical data at a glance: OGURAHPC-N209WDF - Powerful cordless hole punch with only 11.3 kg incl. battery.Die depth: 40 mm Punching capacity up to DIN S275 Round hole Ø 6.0 - 20.0 mm Slotted hole 6.5 x 10.0 to 14.0 x 21.0 mm Material thickness 2.0 - 9.0 mm Punching capacity for stainless steel Round hole Ø 6.0 - 20.0 mm Material thickness 3.0 - 9.0 mm Punching time: 4 secondsMotor: 18 Volt DC Li-ion batteryDimensions (L x W x H): 430x127x315 mmWeight: 11.3 kgdelivery: - HPC-N209WDF-M18V- MAKITA 18V/3Ah battery- MAKITA charger- Carrying case

Sheet metal hole punching attachment with 3/8" UNF thread compatible with ALFRA, GREENLEE and HÄWA sheet metal punchers.All-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

The BLHH4 is a versatile hand-hydraulic sheet metal punch with integrated pump - ideal for precise cut-outs in sheet steel, stainless steel and plastic with material thicknesses of up to 3 mm. The tool head can be rotated 360° in three axes, offering maximum manoeuvrability even in confined spaces. Thanks to its compatibility with tools from ALFRA, HÄWA and GREENLEE, the BLHH4 is ideal for use in switch cabinet construction, car bodywork or when machining stainless steel housings. Performance data: Ø 82 mm in sheet steel t = 2 mm Ø 63 mm in sheet steel t = 3 mm Ø 63 mm in VA t = 2 mm Suitable accessories: Round perforator for sheet steel up to Ø 96 mm Round perforator for VA up to Ø 63.5 mm Discover now at KW Hydraulik - your partner for professional sheet metal working tools. Integrated hydraulic pumpCompatible with ALFRA, HÄWA and GREENLEEFor punching sheet steel, stainless steel and plasticThe head can be rotated 360° in three axes, this high degree of manoeuvrability allows you to effortlessly reach any area to be processedScope of delivery: - BLHH-4 hole punch- Pull axis 19x130 mm - Pull axis 9.5x70 mm - Adapter 19x9.5 mm- Case The following tools can be used: Round hole tools for ST37 / t=2mm: max. D=82 mmRound hole tools for ST37 / t=3mm: max. D=63 mmRound hole tools for VA / t=2mm: max. D=63 mm

Versatility for up to 15 applicationsThe BPP063 cordless hydraulic MULTITOOL from STANLEY-DUBUIS is a powerful, versatile tool with 62 kN pressing force and two-stage hydraulics with fast feed, which is suitable for up to 15 different applications. Thanks to the robust quick-release coupling, the various tool inserts can be changed quickly and safely, while the swivelling holder offers maximum flexibility.The impact-resistant housing with two-component handle ensures comfortable handling, while the USB interface for data readout and the automatic pressure cut-off ensure a high level of process reliability. The powerful 18V / 5 Ah lithium-ion battery from DEWALT is included as standard; batteries up to 18V / 12 Ah are available as an option.The BPP063 is supplied in an extremely hard-wearing case, including battery and charger, but without inserts - these are available for various applications such as pressing, cutting, punching, bolt and nut cutting or straightening contact wires.Pistol-shaped, heavy-duty design with fast feed (two-stage hydraulics)Robust and durable quick coupling for holding the various tool inserts. DEWALT18 volt / 5 Ah lithium-ion battery and XR series charger supplied.Batteries up to 18 Volt / 12 Ah are available as an option.The inserts can be rotated in the holder.Impact-resistant housing with two-component handle for perfect handlingSupplied in an extremely hard-wearing caseAutomatic switch-off after reaching the maximum pressure (pressure relief valve)USB interface for data readoutForce: 62 kNStroke: 38 mmDimensions: 295x86x335 mmWeight: 3.95 kgScope of delivery:Battery-powered hydraulic combi tool,incl. one battery, charger and case,without interchangeable tool insertsAvailable tool inserts:XPM-062 compact, closed press head with hinged lock for pressing even in confined areas.For "60-CK" series press inserts, compatible with "KLAUKE Series 22", "DUBUIS D62" series insertsCrimping force 62 kN, enables crimping of:max. 300 mm² copper cable lugs to DIN 46235max. 300 mm² aluminium XCM-050 - open cutting head Ø50mm for CU and AL cablesXGM-025 - closed cutting head Ø25mm for aluminium-steel cables (ACSR) - overhead lineXHM-062 - Punch for perforators with 3/4 "UNF mounting thread,compatible with sheet metal punches of the brands GREENLEE, ALFRA, ...max. Ø96mm in sheet steel 2mmXCMDIN - Profile rail cutting insert for DIN mounting railsTS15x35mm, TS7.5x35mm, TS5x15mmG-railCU 3x10mm, CU 3x25mmSlotted hole insert M6XCMSTRU - Profile rail cutting insert for STRUT support rails41x41mm and 41x21mmXCM008 - Bolt cutter up to Ø8mmCutting head available in three different versions: curved, straight, flush cuttingIdeal for cutting fasteners such as lag screws, screws, L-shaped hooks and nails. XPM061 - compact, open crimping head for crimping in tight spaces. For press inserts series "60-D" DIN 48083-6M, compatible with inserts from the "KLAUKE series 18", "DUBUIS D61" series Crimping force 62 kN, enables crimping of: max. 185 mm² copper cable lugs to DIN 46235 max. 185 mm² aluminium XPM060F - closed four-pin crimping head, does not require interchangeable crimping inserts.Crimping force: 62 kNmax. 400 mm² copper commercially available standard cable lugsmax. 300 mm² aluminium commercially available standard cable lugsXPM130D - compact, closed crimping head with hinged closure.For "130-C" series crimping inserts, compatible with "KLAUKE Series 13" and "DUBUIS C130" inserts Crimping force 130 kN, enables crimping of: max. 300 mm² copper cable lugs to DIN 46235 max. 300 mm² aluminium XDM041 - Contact wire straightener for contact wires from 107-150 mm²Eliminates kinks in the contact wireForce: 40 kNXCMNUT - Nut splitter M8 to M12Force: 43 kNXGMTRC - Threaded rod cutter M6 to M12Force: 60 kNXGMCAT - Contact wire cutter for 102, 120 and 150 mm²Stroke: 27 mmForce: 60 kNXCMTRAY - Mesh cable duct cutter up to Ø6mmfor cutting the grid bars

Special set for overhead line constructionThe BPP063-Set1 cordless hydraulic MULTITOOL from STANLEY-DUBUIS has been specially developed for overhead line construction and combines a powerful 62 kN pressing force with a wide range of applications. Thanks to the two-stage hydraulics with fast feed, it enables fast and precise work processes, while the robust quick-release coupling allows the tool inserts to be changed quickly.This set contains two powerful tool inserts:XPM-062 compact, closed crimping head with flip lock, ideal for confined work areas. Compatible with KLAUKE and DUBUIS inserts, it enables crimping of copper and aluminium cables up to 300 mm².XGM-025 closed cutting head with 25 mm diameter, especially for cutting aluminium-steel cables (ACSR) in overhead line construction. The folding head with precise blade guidance ensures clean cuts with minimum effort.The impact-resistant housing with two-component handle ensures safe handling, while the USB interface enables simple data evaluation. The powerful 18V / 5 Ah lithium-ion battery from DEWALT ensures maximum mobility; batteries up to 18V / 12 Ah are available as an option.The set is supplied in an extremely hard-wearing case, including battery, charger and the two tool inserts - perfect for professional use in power supply and electrical installation. Pistol shape, heavy-duty design with fast feed (two-stage hydraulics) Robust and durable quick-release coupling for holding the various tool inserts. DEWALT18 volt / 5 Ahlithium-ion battery and XR series chargers are included.Batteries up to 18 Volt / 12 Ah are available as an option.The inserts can be rotated in the holder.Impact-resistant housing with two-component handle for perfect handlingXCM025 - Ø25 mm cutting head for ACSR cablesFolding head with precise blade guide, cutting force: 62 kNSupplied in an extremely hard-wearing caseAutomatic switch-off after reaching the maximum pressure (pressure relief valve)USB interface for data readoutForce: 62 kNScope of delivery:Battery-powered hydraulic combi tool, incl. one battery, charger and case, XPM-062 compact, closed crimping head with hinged lock for crimping in tight spaces. For "60-CK" series pressing inserts, compatible with the "KLAUKE Series 22" and "DUBUIS D62" series inserts. Crimping force 62 kN, enables crimping of: max. 300 mm² copper cable lugs to DIN 46235, max. 300 mm² aluminium XGM-025 - closed cutting head Ø25mm for aluminium-steel cables (ACSR) - overhead line

Hydraulic hole punching head EG-P35/110DE from EDILGRAPPAThe EG-P35/110DE is a powerful, double-acting hydraulic punching head with a pressing force of 445 kN, designed for demanding punching work up to 22 mm material thickness and 30 mm hole diameter.Thanks to the double-acting hydraulics, blockage-free retraction of the punch is guaranteed - ideal for use under high loads. It is connected to an external hydraulic pump with 700 bar (10,000 PSI) operating pressure.Scope of delivery:Punching head6 m hydraulic hose lineElectric remote controlPerfectly suited for industrial applications where high force and precision are required. At a glance:Hydraulic tool for connection to a hydraulic pump with 700 bar (10,000 PSI) Double-acting hydraulics for blockage-free extraction of the punch Maximum material thickness 22 mmMaximum diameter: 30 mmScope of delivery:- Hole punching head with 6 metre hose line and electric remote control

The EG-PZ-C35/150DE is a powerful, double-acting hydraulic hole punching head from EDILGRAPPA, ideal for heavy-duty applications in construction and steel construction. With a punching force of 792 kN, the tool is suitable for precise punching of materials up to 26 mm thick and a maximum hole diameter of 35 mm. Thanks to the double-acting hydraulics, reliable retraction of the punch without blockages is guaranteed - ideal for continuous use under demanding conditions. The hole punching head is connected to an external 700 bar hydraulic pump, e.g. the matching BE-AHP700-M18V battery-powered hydraulic pump, which offers maximum mobility on the construction site. Scope of delivery: Hydraulic punching head 6 m hose line Electric remote control For precise, fast punching with high material thickness - robust, durable and reliable. At a glance:Hydraulic tool for connection to a hydraulic pump with 700 bar (10,000 PSI)Double-acting hydraulics for blockage-free extraction of the punchMaximum material thickness 26 mm Maximum diameter: 35 mm Scope of delivery:- Hole punching head with 6 metre hose line and electric remote control

The HPC-2213W from OGURA is a particularly powerful electro-hydraulic hole punch for precise work with flat and sectional steel. It is ideal for demanding applications in steel construction, plant engineering and industrial use. With a jaw depth of 50 mm and the ability to punch round holes from Ø 10-24 mm and slotted holes up to 18 × 21 mm in material up to 13 mm thick (DIN S275), it impresses with its speed and accuracy. Stainless steel up to 9 mm can also be processed reliably. The punching time is just 6 seconds.The device is powered by a 1430 W electric motor (230 V, 50/60 Hz). The robust design with a weight of 28.5 kg ensures high stability. The machine is supplied with a stand (without case).Optionally available: matching accessories such as slotted hole inserts and moulds. The HPC-2213W replaces the predecessor model Handypress HPC-1322 - now with more power and efficiency.At a glance: OGURA HPC-2213W - Powerful electric hole punch, 28.5 kg.Die depth: 50 mm Punching capacity up to DIN S275 Round hole Ø 10 - 24 mm Oblong hole 10x15 to 18x21 mmMaterial thickness 2-13 mm Punching capacity for stainless steel Round hole Ø 10 - 24 mm Material thickness 3-9 mm Punching time: 6 seconds Motor: 1430 watts, 230 V, 50/60 Hz Dimensions (L x W x H): 523x227x463 mm Weight: 28.5 kg Delivery incl. stand without case Replaces Handypress HPC-1322.

The compact HPC156W from OGURA is the lightest electro-hydraulic hole punch in our range - weighing just 7.5 kg, it is ideal for mobile applications in steel construction. Despite its low weight, it impresses with a punching force of 83.3 kN and high precision.The machine punches round holes from Ø 4-15 mm and slotted holes up to 11 × 16.5 mm in materials up to 6 mm thick (DIN S275) and up to 6 mm CrNi steel - in just 4 seconds. With a jaw depth of 25 mm, it is particularly flexible to use. It is driven by a 230 V AC motor.The HPC156W is supplied with a stand in a case. Suitable accessories such as punches and dies are available as an option.At a glance:OGURA HPC156W - Our lightest electric hole punch with only 7.5 kg.Die depth: 25 mm Punching force: 83.3 kNPunching capacity up to DIN S275 Round hole Ø 4.0 - 15.0 mm Slotted hole 6.5 x 10.0 to 11.0 x 16.5 mm Material thickness 2.0 - 6.0 mm Punching capacity for stainless steel Round hole Ø 6.5 - 15.0 mm Material thickness 3.0 - 6.0 mm Punching time: 4 secondsMotor: 230 Volt ACDimensions (L x W x H): 460 x 115 x 293 mmWeight: 7.5 kgdelivery:- HPC-156W-230V- Stand- Transport caseReplaces Handypress HPC-615.

The HPC-N209W from OGURA is a powerful yet compact electric hole punch for precise work in steel construction. Weighing just 11.3 kg, with a punching depth of 40 mm and a punching time of just 4 seconds, it is ideal for mobile use.The machine punches round holes from Ø 6-20 mm and slotted holes up to 14 × 21 mm in material thicknesses up to 9 mm (DIN S275) or 8 mm for stainless steel. The powerful 230 V motor (1050 watts) ensures reliable operation even under high loads.Delivery includes a stand in a case. Additional accessories such as suitable punches and dies are available separately.At a glance:OGURA HPC-N209W - Powerful electric hole punch with only 11.3 kg.Die depth: 40 mm Punching capacity up to DIN S275 Round hole Ø 6.0 - 20.0 mm Slotted hole 6.5 x 10.0 to 14.0 x 21.0 mm Material thickness 2.0 - 9.0 mm Punching capacity for stainless steel Round hole Ø 6.0 - 20.0 mm Material thickness 3.0 - 8.0 mm Punching time: 4 secondsMotor: 1050 watts, 230 V, 50/60 HzDimensions (L x W x H): 5290x127x315 mmWeight: 11.3 kgDelivery includes- HPC-N209W-230V- Stand- Transport caseReplaces Handypress HPC-920.

The ESK36-12-60-230V is a powerful electro-hydraulic hole punch for working with flat and sectional steel. It is ideal for applications in steel construction, plant engineering and industrial use. With a jaw depth of 60 mm and the ability to punch round holes of Ø 10-36 mm and slotted holes in material up to 12 mm thick (DIN S275), it impresses with its speed and accuracy. The device is powered by a 1500 W electric motor (230 V, 50/60 Hz). The robust design with a weight of 25.7 kg ensures high stability.At a glance: Jaw depth: 60 mm Punching capacity up to DIN S275Round hole Ø 10 - 24 mmSlotted hole 10x15 to 18x21 mmMaterial thickness 3-12 mm Motor: 1500 watts, 230 V, 50/60 Hz Weight: 25.7 kg Scope of delivery: Electro-hydraulic hole punch, 230 VAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

Round hole insert for OGURA HPC156 - Accessories for precise punching in steel construction The round hole insert has been specially developed for the OGURA HPC-156-W and HPC-156-WDF hydraulic hole punches. It consists of a punch and die and is ideal for precise applications in steel construction - for example when punching flat or sectional steel. Thanks to its high-quality workmanship and exact dimensions, the insert ensures reliable, repeatable punching, even with thicker materials. It therefore perfectly complements the range of applications for OGURA punches and enables efficient work directly on the construction site or in the workshop. You can find more information on the matching devices here: OGURA HPC-156-W (electric) OGURA HPC-156-WDF (cordless) Area of application: Tools for steel construction

Slot punch insert for OGURA HPC156 - Accessories for precise punching in steel construction The slot punch insert is specially designed for the OGURA HPC-156-W and HPC-156-WDF hydraulic hole punches. It consists of a punch and die and is ideal for professional use in steel construction, for example for punching slotted holes in flat and sectional steel. The robust design and precise manufacturing ensure reliable results under high loads. Ideal for demanding applications where precision and repeat accuracy are essential - directly on the construction site or in the workshop. You can find suitable machines here: OGURA HPC-156-W (electric) OGURA HPC-156-WDF (cordless) Area of application: Tools for steel construction

The round hole insert is manufactured to fit perfectly for use with the OGURA HPC-2213-W electric hole punch. Consisting of a punch and die, it is ideal for precise hole punching in flat and sectional steel with material thicknesses of up to 13 mm - particularly in steel construction, metal construction or workshop production. Thanks to its robust design and precise dimensional accuracy, the tool enables permanently repeatable results - even for demanding applications in S275 steel or CrNi materials. Suitable machine: OGURA HPC-2213-W (electric hole punch) Area of application: Tools for steel construction

The slotted hole inserts for the OGURA HPC-2213-W consist of precisely manufactured punches and dies and are specially designed to meet the requirements of professional steel and metal construction. Whether on the construction site or in the workshop - they enable clean, repeatable slotted holes to be made directly on site. With their robust design and precise fit, they ensure optimum results when punching flat or profiled steel. The inserts fit perfectly with the OGURA HPC-2213-W electro-hydraulic punch, which is designed for material thicknesses of up to 13 mm. Thanks to the modular design, different size variants are available - ideal for reacting flexibly to different requirements. Find the right punch: OGURA HPC-2213-W

The HPC-N208W from OGURA is a compact and powerful electric hole punch that is ideal for professional use in steel construction. With a punching depth of 40 mm, a weight of just 10.3 kg and a punching time of 4 seconds, it impresses with its efficiency and ease of use.The machine punches round holes up to Ø 20 mm and slotted holes up to 14 × 21 mm in material thicknesses up to 9 mm (DIN S275) or 8 mm for stainless steel. The 1050 watt motor (230 V) ensures reliable performance on the construction site and in the workshop.The delivery includes a stand in a case. Note: This model has been replaced by the improved HPC-N209W.At a glance:OGURA HPC-N208W - Powerful electric hole punch with only 10.7 kg.Die depth: 40 mm Punching capacity up to DIN S275 Round hole Ø 6.0 - 20.0 mm Slotted hole 6.5 x 10.0 to 14.0 x 21.0 mm Material thickness 2.0 - 9.0 mm Punching capacity for stainless steel Round hole Ø 6.0 - 20.0 mm Material thickness 3.0 - 8.0 mm Punching time: 4 secondsMotor: 1050 watts, 230 V, 50/60 HzDimensions (L x W x H): 487x127x315 mmWeight: 10.3 kgDelivery includes- HPC-N208W-230V- Stand- Transport caseReplaces Handypress HPC-820.

The HPC-N208WDF from OGURA is a powerful cordless hole punch designed for precise punching of material thicknesses up to 9 mm (DIN S275) - up to 8 mm for stainless steel . With a weight of just 10.7 kg and a punch depth of 40 mm, it is compact and flexible in use, for example in steel construction.The punch processes round holes up to Ø 20 mm and slotted holes up to 14 × 21 mm with a punching time of just 4 seconds. It is powered by an 18 V DC battery motor. The delivery includes a case. This model has been replaced by the improved version HPCN209WDF.OGURA HPC-N208WDF - Powerful cordless hole punch with only 10.7 kg.Die depth: 40 mm Punching capacity up to DIN S275 Round hole Ø 6.0 - 20.0 mm Slotted hole 6.5 x 10.0 to 14.0 x 21.0 mm Material thickness 2.0 - 9.0 mm Punching capacity for stainless steel Round hole Ø 6.0 - 20.0 mm Material thickness 3.0 - 8.0 mm Punching time: 4 secondsMotor: 18 V, DCDimensions (L x W x H): 417x127x315 mmWeight: 10.7 kgDelivery includes- HPC-N208WDF-M18V- MAKITA 18V/3Ah battery- MAKITA charger- Carrying caseReplaces Handypress HPC-820.

The round hole inserts (punch and die) are specially developed for the hydraulic hole punches of the OGURA HPC-N series and are ideal for precise and reliable punching in steel construction and metalworking.Compatible with the following models:HPC-N186-W and HPC-N186-WDFHPC-N208-W and HPC-N208-WDFHPC-N209-W and HPC-N209-WDFThe insert impresses with its dimensional accuracy, durability and quick changeability - ideal for the professional punching of round holes with Ø18 mm and material thicknesses of up to 9 mm.Area of application: Tools for steel construction

The slotted hole inserts are suitable for several models in the OGURA HPC-N series and enable precise punching of slotted holes in material thicknesses of up to 9 mm - perfect for professional use in steel construction and metal construction.Compatible with the following models:HPC-N186-W and HPC-N186-WDFHPC-N208-W and HPC-N208-WDFHPC-N209-W and HPC-N209-WDFThe combination of high-quality punch and die ensures clean and repeatable results even under demanding conditions. Ideal for daily use on the construction site or in the workshop.👉 Area of application: Tools for steel construction

Column punching machine for precise punching of enclosure doors and housings The KWW510H stand punching machine has been specially developed for professional use in enclosure and housing construction. Whether terminal boxes, cable entry plates or complete enclosure doors - with a generous throat depth of 510 mm and a robust, stress-free annealed punching frame made of solid material, this machine offers maximum stability and flexibility when processing large components up to 1,000 × 2,000 mm. Thanks to pedal-operated hydraulics, precise length and depth stops in the X and Y axes and the swivelling door support with rollers, operation is not only convenient, but also optimally designed for repeatable row punching and small batch production. The KWW510H is compatible with a wide range of tool shapes - from round, square and rectangular holes to special shapes and even cutting tools for nibbling out large cut-outs. Ideal for sheet thicknesses up to 2 mm (steel/stainless steel) and 4 mm plastic, the KWW510H combines precision, user-friendliness and industrial performance - a complete professional solution for workshops, panel builders and metal fabricators. Ideal for punching terminal boxes, enclosures, cable entry plates and enclosure doors made of sheet steel or stainless steel up to 1000 x 2000 mm.Projection of the bracket: 510 mmStress-free annealed punching frame made from solid material. Hydraulic operation by foot pedal.Round, square, rectangular and hole punches in special shapes can be usedQuick and easy tool changeFor row punching and small batchesSpecial cutting tools can be used to produce (nibble out) very large cut-outsTechnical datathroat depth: 510 mm Dimensions (without supports): 800 x 720 x 1,720 mmSystem weight (incl. components): approx. 200 kgHydraulic unit: 230 V / 0.37-0.55 kWIntegrated motor protection Motor protection switch with thermal relayMax. Sheet thicknessSheet steel (ST37): max. 2.0 mmStainless steel (1400-V2A): max. 2.0 mmPlastic, polyester: max. 4.0 mm (depending on punch size)Scope of deliveryPunching machine KWW-510-HPunching frame mounted on a mobile base frameHydraulic cylinder and hydraulic pump 230V and safety switchPunching protection device, also serves as a hold-down deviceLength and depth stop in X and Y axis with measuring displaySwivelling door support with rollersWithout tools and accessories required for punchingOptionally available :Laser pointerThe following tools can be used:Round tools: from Ø 4.2 mm to 89 mm Square tools: from 22.2 x 22.2 mm to 92.0 x 92.0 mmRectangular tools: from 22.0 x 30.0 mm to 29.0 x 71.0 mmTools in special shapes: round tools with lugs, cutting tools, etc.