Drills / rotary hammers

The DOA AH15 is a hydraulically operated angle drive, specially developed for applications with pipe drilling machines or screwdrivers. With its slow, controlled rotary movement, the device is ideal for drilling gas and water pipes, opening and closing gate valves and raising and lowering the top decks of car hoists. The ergonomic rotary handle with dead man's control allows the speed to be precisely regulated - and stopped immediately when released. The right/left-hand rotation, adjustable torque and protected design make the tool particularly suitable for use in wet, dusty or cold conditions. Thanks to its robust design, the AH15 is not only versatile, but also suitable for use in potentially explosive atm ospheres. An optional revolution counter (model VO-30) is available, which is particularly useful for controlled drilling operations. The AH15 is a professional tool for the construction industry and railway technology - wherever reliability is required under extreme conditions. This slow-rotating tool is suitable:As a drive for drilling gas and water pipesFor opening and closing gas and water valvesFor lifting and lowering upper decks on car trainsFeaturesThe speed is infinitely variable using the rotary handle.Immediate stop when the handle is released. (dead man's control)The tool has clockwise/anticlockwise rotationUse in potentially explosive atmospheres is possibleCan be used in very dirty and extremely wet conditions.Adjustable torque and speedCan be used at low and high temperaturesRevolution counter (for model VO-30)

The DOA HD13 is a powerful hydraulic hammer drill with SDS-MAX chuck, which has been specially developed for demanding applications in rock, concrete and masonry. Thanks to its robust design, the HD13 is also suitable for use under water, for example in underwater construction or for maintenance work in the maritime sector. With a hydraulic output of 20-25 l/min at 140-170 bar, the rotary hammer achieves a speed of up to 400 rpm and an impact rate of 2000 blows per minute, enabling efficient work in the hardest materials. The SDS-MAX tool holder ensures that tools can be attached quickly and securely. The integrated handle and speed limiter ensure ergonomic operation and a high level of work safety - even during prolonged use. With a weight of just 13 kg and a compact design (52 cm), the tool can be used flexibly on construction sites or under water. The HD13 is therefore the ideal tool for construction professionals in the steel construction sector, in the building trade and for underwater work. The HD-13 hammer drill is an impact drill for drilling in rock, concrete or masonry with SDS-MAX inserts.SDS-MAX inserts. Hydraulics: 20-25 l/min. @ 140-170 barSpeed: 400 min-1 at 25 L/min.Impact rate: 2000 min-1 HandleSDS-MAX tool holderSpeed limiterDimensions: 52 cmWeight: 13 kg

The DOA VO31 is a powerful, hydraulically operated special motor for manoeuvring gate valves and valves in gas and water pipelines. Designed for professional use in the supply network, the tool impresses with its high torque, precise operating control and robust design - ideal for applications in the construction industry, utility companies or municipal use. Thanks to the 90 cm long shaft with quick-release coupling, the right/left-handed function and the ergonomic rotation control (dead man's control), the VO31 is easy to handle - even by just one operator. The supplied safety counter-holder bracket provides additional stability and safety when working on difficult-to-access sliders. The tool is technically impressive with an adjustable torque of up to 400 Nm, a torque-limiting pressure valve, speed control via oil flow valve and handle control as well as an integrated digital display for counting revolutions - a key factor in the precise documentation of gate valve movements. With an application range of 15-40 L/min at 140-180 bar, the VO31 is compatible with standard hydraulic systems such as those used in vehicles, mini-excavators or power units. Its compact design (95 × 33 × 21 cm) and low weight of 16 kg make it an indispensable companion for modern service teams in the field. The hydraulic mode of operation ensures quiet operation, minimal vibration, low maintenance and complete protection against electric shock - ideal for daily use in the toughest conditions.Powerful and modern hydraulic tool designed for operating water valves on water mains.The long handle and clockwise / anti-clockwise operation control guarantee excellent control of operations in all conditions, it can be used by one or two operators and can be operated by hydraulic power packs as well as by vehicles and mini-excavators with hydraulic connection. Its use guarantees safety and great time savings.Hydraulic operation means noiselessness, low vibration, robustness, long service life, minimum maintenance, implicit impossibility of injury from electric shock.It can also be used for the mechanical rotation of other rotating equipment, such as pipe and irrigation channel slide handling machines, various crank mechanisms.VO31 increases productivity and simplifies operation, it should not be missing in the equipment of modern equipped teams.Advantages:Equipped with a safety counter-holder bracket for use by one operator and for fixing to a fixed point, it prevents the machine from rotating. One-man operation is possible."Dead man" rotation control that blocks rotation and function as soon as the handle is released.High rotation force that allows you to turn even heavily blocked valves or other applications.The 90 cm shaft can be removed and connected thanks to the quick coupling.Technical data:Speed0-70 min-1 at 20 l/min0-100 min-1 at 30 L/minMeasurement of the rotations performed: Yes, via digital display. Important for gate valves!Torque: 400 Nm at 140 barTorque regulation: YES, on the integrated pressure relief valveSpeed regulation: Yes, on the oil flow limiting valve and on the rotary handleHydraulics: 15-40 l/min at 140-180 barDimensions: 95x33x21 cmWeight: 16 kg

The DOA HD is a compact hydraulic hammer drill with SDS-PLUS chuck that has been specially designed for underwater use. With a weight of just 8.2 kg and a length of 47 cm, it is particularly suitable for working in confined spaces - for example during maintenance, in civil engineering or in underwater technology. The rotary hammer works with an oil volume of 10-50 l/min at 50-114 bar and achieves a speed of 625 min-¹ at 23 l/min and 4,460 blows per minute. The tool holder is designed for SDS-PLUS drill bits up to Ø 22.2 mm - with STANLEY-DEWALT drill bits, diameters up to 30 mm are even possible. Thanks to the integrated speed limiter and ergonomic handle, safe and controlled work is guaranteed even under difficult conditions. Important note: The safety low-pressure bypass valve (SN-DBV) must be ordered for operation under water. Ideal for use in the construction industry or for work in railway engineering when reliable drilling is required regardless of the weather. This rotary hammer is equipped with an SDS-PLUS tool holder. Hydraulics: 10-50 l/min. at 50-114 barSpeed: 625 min-1 at 23 L/min.Impact rate: 4460 min-1 HandleSDS-PLUS diameter max. D=22.2 mm (30 mm with STANLEY-DEWALT drill bits)Speed limitationATTENTION !!! Order SN-DBV at the same time!Dimensions: 47 cmWeight: 8.2 kg

The DOA HD is a robust hydraulic hammer drill with SDS-MAX drill chuck, specially designed as an underwater version for demanding work in diving applications. With its high impact power of 2,500 blows per minute, it is ideal for drilling in rock, concrete or masonry, even under extreme conditions. The HD hammer drill impresses with its compact design (50 cm long) and a weight of just 14 kg, which makes it easy to handle underwater. The speed is limited to 250 min-¹ with an oil flow rate of 23 l/min - this allows the tool to work in a powerful and controlled manner. The ergonomic handle and SDS-MAX tool holder enable safe and quick tool changes. Thanks to its hydraulic control with 10-50 L/min at 100 bar, the HD is suitable for a wide range of applications - particularly in underwater technology and in areas where conventional electric or compressed air-powered tools reach their limits. Important note: For safe and compliant operation under water, it is essential to order the appropriate safety low-pressure bypass valve (SN-DBV). Areas of application include the construction industry and railway engineering, wherever powerful and weather-independent underwater drilling is required. This hammer drill is equipped with an SDS-MAX tool holder. Hydraulics: 10-50 l/min. at 100 barSpeed: 250 min-1 at 23 L/min.Impact rate: 2500 min-1 HandleSDS-MAX tool holderSpeed limitationATTENTION !!! Order SN-DBV at the same time!Dimensions: 50 cmWeight: 14 kg

The HYCON HRD28X is a powerful, hand-held hydraulic rotary hammer with connection for air flushing, specially designed for demanding drilling work in granite, concrete or masonry. With its robust impact and rotation unit and the option of combining it with a compressor, it delivers reliable results even in deep holes of up to 6 metres. Thanks to the HEX 22x108 mm shank size and its high rotation (320 min-¹) and impact frequency (40 Hz), the HRD28X is ideal for drilling anchor holes, blast holes or splitting hard rock types. This device really comes into its own in confined spaces where no drill rig can be used. With an operating pressure of 130-172 bar at 30 l/min and a low weight of just 27.5 kg, the HRD28X remains easy to handle even when used for long periods. The low vibration level and air flushing also enable clean and efficient work - the rotary hammer can even be used under water and is therefore the preferred equipment of professional diving teams. The HRD28X is manufactured by HYCON and is ideal for applications in the construction industry, steel construction and underwater technology. The HYCON HRD-28-X is a hand-held high-performance hammer drill for the heaviest drilling tasks in granite and concrete and up to 6 m drilling depth.The use of standard integral drill steel with air flushing from an external compressor in combination with a powerful hydraulic impact and rotation unit makes the HRD-28-X a lighter, powerful and efficient rotary hammer. The HRD-28-X is ideal for making anchor holes and for blasting or splitting holes between 25 and 50 mm when you need to drill deeper with maximum air flushing. Together with a compressor of your choice, it is suitable for underwater drilling and is therefore the drilling tool favoured by professional divers. Because this hammer drill utilises the benefits of both hydraulics and pneumatics, it can be used anywhere, drill deeper and still be light enough to work with for many hours. Simply connect it to one of the compact HYCON hydraulic power packs and a compressor - and you're ready to go. Made for underwater and deep drilling For deeper hand-guided drilling in confined spaces that do not allow a drill rigLow weightPerfect for drilling holes for explosives or chemicals where more depth is requiredRecommended for drilling in granite with a depth of up to 6 m / Ø34 mm (depending on compressor)Contact one of our sales representatives for recommendations for deeper and wider holesHydraulics: 30 L/min at 130-172 barDrill steel shank size: HEX 22x108 mm Speed (anti-clockwise ccw): 320 min-1 Impact frequency: 40 Hz Sound power level: 105 dB LWADrilling flushing air: 10 m³/h Vibration level (3 axes): 13 m/s2 Dimensions: 708x460 mmWeight: 27.5 kg

The HYCON HRD30 is a powerful hydraulic rotary hammer with integrated compressor, specially developed for drilling in granite, concrete and other hard materials up to a depth of 2.4 metres. The integrated air flushing eliminates the need for an external compressor - saving space, time and logistics costs on the construction site. Thanks to the high impact energy, the HRD30 enables fast and precise drilling performance. The integrated cyclone filter technology ensures an optimised air flow and extended maintenance intervals, which significantly increases reliability in continuous use. The anti-vibration handles offer a high level of operating comfort and enable fatigue-free use even over longer periods. The rotary hammer is ideal for applications in the construction and infrastructure sectors, especially when many smaller holes in granite or concrete are required. In combination with the compact, portable hydraulic power packs from HYCON (optionally with petrol, diesel or electric motor), the result is a particularly mobile and powerful drilling package - also for indoor projects or tunnel construction. Ideal for professional use in the construction industry, in steel construction or for demolition work and recycling. Also suitable for underwater drilling in combination with a compressor.The HRD30 Rock Drill is a high-performance hydraulic drill designed for hard drilling applications in concrete and granite at depths of up to 2.4 metres. With the integrated compressor, you don't need to bring an external compressor to the construction site. In addition, it works quickly and makes precise and circular holes due to the high impact energy. The anti-vibration handles increase comfort for the operator and enable longer working intervals. This gives the HRD30 rock drill a high price/performance ratio and makes it a unique and attractive choice for rock drilling applications - especially when multiple smaller holes are required in granite or concrete. The improvement of HRD30 includes a significant improvement of the overall design and the development of a unique cyclone filter system that ensures a better air flow for the integrated air flushing compressor. The design of the integrated cyclone filter provides longer intervals between cleaning and replacement of the filter, resulting in a more reliable and effective rock drill.HYCON's small compact hydraulic power packs, available with petrol or diesel engines or with electric motors for indoor or tunnel projects, offer you the perfect powerful and highly mobile drilling package.Hydraulics: 30 l/min at 150-172 barDrill steel shank size: HEX 22x108 mm Speed (anti-clockwise ccw): 320 min-1 Impact frequency: 40 Hz Sound power level: 105 dB LWADrilling flushing air: 10 m³/h Vibration level (3 axes): 13 m/s2 Dimensions: 722x460 mmWeight: 29 kg

The STANLEY DL07 - Hydraulic drilling machine with a D=13 mm drill chuck is a powerful, compact tool for professional drilling work under water. It is suitable for drilling in wood, metal and masonry up to Ø 13 mm and impresses with a robust drill chuck, ergonomic handle and reversible direction of rotation. With a hydraulic range of 11-45 l/min at 70-140 bar and a speed of 1000 min-¹ at 30 l/min, it offers reliable performance - even under extreme conditions. Typical areas of application include the construction industry, steel construction, demolition and recycling work. The DL07 comes from the renowned manufacturer STANLEY® and is available from KW Hydraulik - your expert for high-quality hydraulic tools.The STANLEY® drill is suitable for drilling holes in wood, metal or masonry up to 13mmbore diameter.Drill chuck up to 13mm HandleReversible direction of rotationHydraulics: 11-45 l/min. at 70-140 barSpeed: 1000 min-1 at 30 L/min.Dimensions: 230x100 mmWeight: 2.7 kg

The STANLEY HD01 - Hydraulic rotary hammer with SDS-PLUS chuck is a versatile and powerful tool for demanding applications in construction, industry and trade. With a switchable percussion mechanism, the HD01 is suitable for powerful drilling in rock, concrete and masonry as well as for precise drilling work in metal, wood or plastic. The SDS-PLUS tool holder allows drill bits to be changed quickly - an optional chuck with adapter (½") is also available. With a hydraulic output of 11-34 l/min at 50-114 bar, a speed of 800 min-¹ (at 23 l/min) and an impact rate of 4200 min-¹, the STANLEY HD01 impresses with its efficiency and penetrating power. An ergonomic handle, depth stop and integrated speed limiter ensure safe and convenient operation. Drill diameters up to 22.2 mm - even up to 30 mm with STANLEY-DEWALT drill bits - make it the ideal solution for professional requirements. Typical areas of application are the construction industry, steel construction and demolition and recycling work. The HD01 comes from the renowned manufacturer STANLEY® and is available from KW Hydraulik - your expert for robust and precise hydraulic tools. The new STANLEY® HD-01 hammer drill is an impact drill with a switchable impact function.With the percussion function switched on, it can be used for drilling in rock, concrete or masonry. With the impact function switched off, it can be used for drilling in metal, wood and plastic. It is equipped with an SDS-PLUS tool holder. A chuck (1/2") with adapter is available as an accessory. Hydraulics: 11-34 l/min. at 50-114 barSpeed: 800 min-1 at 23 L/min.Impact speed: 4200 min-1 Switchable impact mechanismHandleDepth stopSDS-PLUS diameter max. D=22.2 mm (30 mm with STANLEY-DEWALT drill bits)Speed limiterDimensions: 36x14 cmWeight: 4.1 kg

The STANLEY HD45 - hydraulic hammer drill with SKIL-736 chuck (HEX 19x108 mm) is a robust impact tool for particularly tough applications - even under water. Thanks to its high performance and versatile features, the HD45 is ideal for drilling in concrete, asphalt or masonry with diameters from 9.5 to 50 mm and a drilling depth of up to 90 cm. Drilling diameters of up to 76 mm are even possible with core drills. The adjustable speed from 50 to 300 min-¹, the hydraulic range of 26-34 l/min at 140 bar and the integrated nitrogen pressure accumulator guarantee constant impact force with precise control. Equipped with clockwise/anticlockwise rotation, hose whips with flat-face connections (ISO 16028) and a proven SKIL-736 drill chuck, the HD45 fulfils the highest demands in professional use. The underwater version of the STANLEY HD45 is designed especially for the construction industry, steel construction and tough demolition and recycling work. The tool weighs 21 kg and measures 57 cm - compact and powerful at the same time. This professional tool is available directly from KW Hydraulik - your certified partner for high-quality hydraulic solutions from STANLEY®. The STANLEY® HD-45 rotary hammer drill is a rotary percussion tool for drilling in concrete,masonry or asphalt.Hydraulics: 26-34 l/min. at 140 barAdjustable speed 50 to 300 min-1Drilling diameter from 9.5 to 50 mm / 90 cm drilling depthDrilling diameter with core drills up to 76 mmHose whips with flat-face connections (ISO-16028)Nitrogen pressure accumulatorClockwise / anti-clockwise rotationUnderwater versionDimensions: 57 kgWeight: 21 kg