Hand-held drills / impact wrenches

The DOA AH15 is a hydraulically operated angle drive, specially developed for applications with pipe drilling machines or screwdrivers. With its slow, controlled rotary movement, the device is ideal for drilling gas and water pipes, opening and closing gate valves and raising and lowering the top decks of car hoists. The ergonomic rotary handle with dead man's control allows the speed to be precisely regulated - and stopped immediately when released. The right/left-hand rotation, adjustable torque and protected design make the tool particularly suitable for use in wet, dusty or cold conditions. Thanks to its robust design, the AH15 is not only versatile, but also suitable for use in potentially explosive atm ospheres. An optional revolution counter (model VO-30) is available, which is particularly useful for controlled drilling operations. The AH15 is a professional tool for the construction industry and railway technology - wherever reliability is required under extreme conditions. This slow-rotating tool is suitable:As a drive for drilling gas and water pipesFor opening and closing gas and water valvesFor lifting and lowering upper decks on car trainsFeaturesThe speed is infinitely variable using the rotary handle.Immediate stop when the handle is released. (dead man's control)The tool has clockwise/anticlockwise rotationUse in potentially explosive atmospheres is possibleCan be used in very dirty and extremely wet conditions.Adjustable torque and speedCan be used at low and high temperaturesRevolution counter (for model VO-30)

The DOA AK46G - Hand-held hydraulic core drill D=50-160 mm is a compact, powerful tool for precise core drilling in concrete, stone or masonry. With a drilling diameter of 50 to 160 mm and a maximum torque of 84 Nm, the AK46G is ideal for demanding applications in pipe construction, civil engineering, pipeline construction as well as renovation and refurbishment work. An integrated safety valve with shut-off function reliably protects against damage if the drill bit gets stuck. The machine has a water connection for clean and effective drilling. The tool holder with 1-1/4" external thread and 1/2" internal thread ensures full compatibility with standard drill bits. The hydraulic output is 20-34 l/min at 105-170 bar, with a permissible back pressure of 90 bar. With a speed of 400-600 min-¹, a weight of just 8 kg and compact dimensions (9 × 32 × 40 cm), the AK46G impresses with its precise handling - even in confined spaces. As a quality product from DOA, the AK46G is available from KW Hydraulik - your specialist for professional hydraulic core drilling technology in construction and pipeline construction. Safety valve with shut-off in the event of jamming84 Nm max. torqueWater connectionArbor: 1-1/4" external, 1/2" internalHydraulics: 20-34 l/min. at 105-170 bar, back pressure: 90 barDrill diameter: ø 50 - 160 mmSpeed: 400-600 min-1Dimensions: 9x32x40 cmWeight: 8 kg

The DOA AK46GUW - hand-held hydraulic core drill D=50-160 mm (underwater version) has been specially developed for submersible work and underwater applications. With a drilling diameter of 50 to 160 mm and a maximum torque of 84 Nm, the machine is ideal for demanding core drilling in concrete, stone or masonry - even under difficult conditions in wet areas or in pipe construction. The AK46GUW is equipped with a safety valve with automatic shut-off in the event of jamming, an integrated water connection and a mandrel with 1-1/4" external thread and 1/2" internal thread. The hydraulic output of 20-34 l/min at 105-170 bar, a back pressure of up to 90 bar and a speed of 400-600 min-¹ ensure powerful and precise drilling performance. With a weight of just 8 kg and compact dimensions (9 × 32 × 40 cm), the AK46GUW is particularly handy and ideally suited for mobile use under water. It is a reliable specialised tool for professional use in construction, industry and for underwater repair and installation work. Available from KW Hydraulik - your specialised dealer for hydraulic special tools and technology from DOA. Safety valve with shut-off in the event of jamming84 Nm max. torqueWater connectionMandrel: 1-1/4" external, 1/2" internalHydraulics: 20-34 l/min. at 105-170 bar, back pressure: 90 barDrill diameter: ø 50 - 160 mmSpeed: 400-600 min-1Dimensions: 9x32x40 cmWeight: 8 kgUnderwater version for submersible work

The DOA AK46S - Hand-held hydraulic core drill D=20-100 mm is a compact, high-performance tool for precise drilling in concrete, masonry or stone. With a drilling range of 20 to 100 mm and a speed of 1000-1500 min-¹, the machine is ideal for applications where speed, precision and mobility are essential - for example in pipe construction, civil engineering or installation work. The AK46S is equipped with a safety valve with automatic shut-off in the event of jamming and offers a high level of user protection. An integrated water connection enables dust-free and efficient drilling. The arbor with 1-1/4" external thread is compatible with standard core drill bits in the professional sector. The machine operates in the hydraulic range of 20-34 l/min at 105-170 bar, with a permissible back pressure of 90 bar. Despite its powerful performance, the AK46S impresses with a weight of just 8 kg and compact dimensions (9 × 32 × 40 cm) - ideal for confined spaces and mobile use. As a quality product from DOA, the AK46S is available exclusively from KW Hydraulik - your partner for hydraulic drilling technology with high efficiency and reliability. Safety valve with shut-off in the event of jamming84 Nm max. torqueWater connectionArbor: 1-1/4" external threadHydraulics: 20-34 l/min. at 105-170 bar, back pressure: 90 barDrill diameter: ø 20 - 100 mmSpeed: 1000-1500 min-1Dimensions: 9x32x40 cmWeight: 8 kg

The DOA AK50-100cc - Hand-guided hydraulic core drilling machine D=125-250 mm (underwater version) is a powerful specialised tool for precise underwater core drilling. Equipped with a 100 cc hydraulic motor, the machine is ideal for large drilling diameters up to 250 mm - for example for foundation work, pipe construction or maritime construction projects. Thanks to the compatible standard mount for drill rigs, the AK50-100cc can be guided precisely. A special highlight: The hydraulic motor is interchangeable, which enables a high degree of adaptability with low operating costs. Depending on the drilling diameter and the hydraulic power, the device achieves 300 min-¹ at Ø 130-250 mm (30 l/min) or 380 min-¹ at Ø 125-180 mm (38 l/min). The machine operates in the hydraulic range of 30-40 l/min at 200 bar, with a permissible back pressure of 90 bar. An integrated water connection, a robust mandrel (1-1/4" external / 1/2" internal) and the well thought-out, modular design make the AK50-100cc a reliable tool for professional immersion applications. With compact dimensions of 54 × 22 cm and a weight of 13 kg, it is robust but handy - ideal for mobile use under water. The DOA AK50-100cc is available from KW Hydraulik - your specialist for hydraulic drilling technology and underwater applications with technology from DOA. Notes:Core drilling machines for mounting on mounts. The hydraulic motor can be replaced quickly. This enables a wide range of applications and reduces costs.Features: Motor:100 cc hydraulic motor for 125-250 mm diameterD = 130-250 mm - 300 min-1 at 30 l/min.D = 125-180 mm - 380 min-1 at 38 L/min.Standard holder for drill standWater connectionArbor: 1-1/4" external, 1/2" internalHydraulics: 30-40 l/min. at 200 bar, back pressure: 90 barDrill diameter: ø125-ø250 (depending on motor fitted)Speed: 300-380 min-1 (depending on motor fitted)Dimensions: 54x22 cmWeight: 13 kgUnderwater version for diving work

The DOA impact wrench DHW-17012 develops a torque of up to 17000 Nm. It is ideal for mechanical and industrial workshops, infrastructure and railway applications, oil and gas, mining and cold workplaces where no air supply is available.Torque control: adjustable torque up to 17000 Nm3-jaw hammer mechanism typeMotor cover with heat dissipationManual inverterHandle made entirely of ErgalErgonomic handle with integrated oil flowMechanical lever with safety leverCan be supplied with T-handleUnderwater version for diving work and version with extended shaft

The DOA impact wrench DHW-301 develops a torque of up to 3000 Nm. It is ideal for mechanical and industrial workshops, infrastructure and railway applications, oil and gas, mining and cold workplaces where no air supply is available.Torque control: adjustable torque up to 3000 Nm3-jaw hammer mechanism typeMotor cover with heat dissipationManual inverterHandle made entirely of ErgalErgonomic handle with integrated oil flowMechanical lever with safety leverUnderwater version for diving work and version with extended shaft available

The DOA impact wrench DHW-3034 develops a torque of up to 3000 Nm. It is ideal for mechanical and industrial workshops, infrastructure and railway applications, oil and gas, mining and cold workplaces where no air supply is available.Torque control: adjustable torque up to 3000 Nm3-jaw hammer mechanism typeMotor cover with heat dissipationManual inverterHandle made entirely of ErgalErgonomic handle with integrated oil flowMechanical lever with safety leverUnderwater version for diving work and version with extended shaft

The DOA impact wrench DHW-501 develops a torque of up to 5000 Nm. It is ideal for mechanical and industrial workshops, infrastructure and railway applications, oil and gas, mining and cold workplaces where no air supply is available.Torque control: adjustable torque up to 5000 Nm3-jaw hammer mechanism typeMotor cover with heat dissipationManual inverterHandle made entirely of ErgalErgonomic handle with integrated oil flowMechanical lever with safety leverUnderwater version for diving work and version with extended shaft

The DOA impact wrench DHW-9512 develops a torque of up to 9500 Nm. It is ideal for mechanical and industrial workshops, infrastructure and railway applications, oil and gas, mining and cold workplaces where no air supply is available.Torque control: adjustable torque up to 9500 Nm3-jaw hammer mechanism typeMotor cover with heat dissipationManual inverterHandle made entirely of ErgalErgonomic handle with integrated oil flowMechanical lever with safety leverCan be supplied with T-handleUnderwater version for diving work and version with extended shaft

The DOA HD13 is a powerful hydraulic hammer drill with SDS-MAX chuck, which has been specially developed for demanding applications in rock, concrete and masonry. Thanks to its robust design, the HD13 is also suitable for use under water, for example in underwater construction or for maintenance work in the maritime sector. With a hydraulic output of 20-25 l/min at 140-170 bar, the rotary hammer achieves a speed of up to 400 rpm and an impact rate of 2000 blows per minute, enabling efficient work in the hardest materials. The SDS-MAX tool holder ensures that tools can be attached quickly and securely. The integrated handle and speed limiter ensure ergonomic operation and a high level of work safety - even during prolonged use. With a weight of just 13 kg and a compact design (52 cm), the tool can be used flexibly on construction sites or under water. The HD13 is therefore the ideal tool for construction professionals in the steel construction sector, in the building trade and for underwater work. The HD-13 hammer drill is an impact drill for drilling in rock, concrete or masonry with SDS-MAX inserts.SDS-MAX inserts. Hydraulics: 20-25 l/min. @ 140-170 barSpeed: 400 min-1 at 25 L/min.Impact rate: 2000 min-1 HandleSDS-MAX tool holderSpeed limiterDimensions: 52 cmWeight: 13 kg

The DOA VO31 is a powerful, hydraulically operated special motor for manoeuvring gate valves and valves in gas and water pipelines. Designed for professional use in the supply network, the tool impresses with its high torque, precise operating control and robust design - ideal for applications in the construction industry, utility companies or municipal use. Thanks to the 90 cm long shaft with quick-release coupling, the right/left-handed function and the ergonomic rotation control (dead man's control), the VO31 is easy to handle - even by just one operator. The supplied safety counter-holder bracket provides additional stability and safety when working on difficult-to-access sliders. The tool is technically impressive with an adjustable torque of up to 400 Nm, a torque-limiting pressure valve, speed control via oil flow valve and handle control as well as an integrated digital display for counting revolutions - a key factor in the precise documentation of gate valve movements. With an application range of 15-40 L/min at 140-180 bar, the VO31 is compatible with standard hydraulic systems such as those used in vehicles, mini-excavators or power units. Its compact design (95 × 33 × 21 cm) and low weight of 16 kg make it an indispensable companion for modern service teams in the field. The hydraulic mode of operation ensures quiet operation, minimal vibration, low maintenance and complete protection against electric shock - ideal for daily use in the toughest conditions.Powerful and modern hydraulic tool designed for operating water valves on water mains.The long handle and clockwise / anti-clockwise operation control guarantee excellent control of operations in all conditions, it can be used by one or two operators and can be operated by hydraulic power packs as well as by vehicles and mini-excavators with hydraulic connection. Its use guarantees safety and great time savings.Hydraulic operation means noiselessness, low vibration, robustness, long service life, minimum maintenance, implicit impossibility of injury from electric shock.It can also be used for the mechanical rotation of other rotating equipment, such as pipe and irrigation channel slide handling machines, various crank mechanisms.VO31 increases productivity and simplifies operation, it should not be missing in the equipment of modern equipped teams.Advantages:Equipped with a safety counter-holder bracket for use by one operator and for fixing to a fixed point, it prevents the machine from rotating. One-man operation is possible."Dead man" rotation control that blocks rotation and function as soon as the handle is released.High rotation force that allows you to turn even heavily blocked valves or other applications.The 90 cm shaft can be removed and connected thanks to the quick coupling.Technical data:Speed0-70 min-1 at 20 l/min0-100 min-1 at 30 L/minMeasurement of the rotations performed: Yes, via digital display. Important for gate valves!Torque: 400 Nm at 140 barTorque regulation: YES, on the integrated pressure relief valveSpeed regulation: Yes, on the oil flow limiting valve and on the rotary handleHydraulics: 15-40 l/min at 140-180 barDimensions: 95x33x21 cmWeight: 16 kg

The HCD25-100 - Hand-held hydraulic core drill D=25-100 mm is one of the most powerful and user-friendly devices in its class. Developed for flexible drilling in hard-to-reach places, it can be used wherever neither electric drills nor drill rigs are practical - for example when drilling in concrete pipes, ventilation shafts or for installation work in existing buildings. The device is completely hand-guided, does not require a separate drill rig and is suitable for almost all materials. For particularly heavy-duty applications, the HCD25-100 can also be adapted to a standard drill rig - maximum flexibility for professional use. An integrated hydraulic torque limiter system (ASCO) ensures maximum safety when drilling: In the event of jamming, the device switches off automatically and reliably prevents kickbacks. The factory-set safety function must not be changed for safety reasons. Important: If a blockage occurs, the core should be removed from the material before the drilling process is restarted. The device is technically impressive with a speed of 1500 min-¹, a drilling range of Ø 25-100 mm and a hydraulic output of 20 l/min at 100-172 bar. The drive adapter supplied (½" BSP socket with 1-1/4" UNC plug) ensures compatibility with standard core bits. The sound pressure level is only 84 dB, which makes the device comfortable to use even for longer applications. Available from KW Hydraulik - your specialist dealer for high-quality hydraulic drilling technology from Hycon. Ideal for anyone looking for efficiency, safety and mobility combined in one tool. The HCD-25-100 is one of the most powerful and user-friendly hand-held core drills on the market. It is perfect for hand-held drilling in hard-to-reach places where drill rigs or electric drills cannot be used. Drilling concrete pipes, ventilation holes or any other type of work where hand-held equipment is the fastest solution.It is extremely easy to use and suitable for any material. No drill rig is required. However, the HCD-25-100 also fits into a standard drill rig for heavy-duty work. The core drill is equipped with a built-in hydraulic torque limiter (ASCO system), which ensures maximum torque and prevents kickback when the drill is jammed. The core drill has an automatic integrated safety function that stops the core drill if it jams. However, in the event of jamming, always release the core bit from the material before you start drilling again. The integrated safety function is set at the factory and must not be disturbed.Hydraulics: 20 l/min. at 100-172 barDrill diameter: ø25-ø100Speed: 1500 min-1Drive adapter : Including ½" BSP socket with a 1-1/4" UNC plug adapterSound pressure level 1 m LWA: 84 dB Vibration level: <2.5 m/s2

The HCD50-200 - Hand-held hydraulic core drill D=50-200 mm is a real powerhouse for mobile use on the construction site. As one of the most powerful and user-friendly core drills in its class, it is specially designed for drilling in hard-to-reach places - ideal where drill rigs or electric drills cannot be used. Typical applications include drilling concrete pipes, ventilation holes or installation openings - especially in sewage construction, where the device is particularly appreciated thanks to its water and dust resistance. The HCD50-200 even enables hand-guided drilling up to Ø 350 mm, which saves an enormous amount of time in flexible applications. For particularly heavy-duty tasks, the device can be optionally integrated into a standard drill rig. An integrated hydraulic torque limiter (ASCO system) ensures safe working: If the drill is blocked, the automatic safety function intervenes and prevents kickback. The safety cut-out is set at the factory and must not be changed. In the event of jamming, the drill core should always be released manually before the process is restarted. Technically, the device is impressive with a speed of 600 min-¹, a drilling range of Ø 50-200 mm, a hydraulic output of 20 l/min at 100-172 bar and a very low vibration level of less than 2.5 m/s². The sound pressure level is only 80 dB - ideal for longer applications. With a weight of just 7.6 kg, the HCD50-200 is also particularly easy to handle. Available from KW Hydraulik - your partner for high-quality core drilling technology from Hycon when maximum performance with minimum effort is required. The HCD-50-200 is one of the most powerful and user-friendly hand-held core drills on the market. It is perfect for hand-held drilling in hard-to-reach places where drill rigs or electric drills cannot be used.Drilling concrete pipes, ventilation holes or any other type of work where hand-held equipment is the fastest solution. It is insensitive to water, dust etc. and very popular for sewage installations. The fact that you can drill hand-guided holes up to ø350 mm without the need for a drill rig opens up a wide range of applications and saves an enormous amount of time. With the HCD-50-200, you can drill up to 350 mm by hand. However, the device also fits into a standard drill rig for heavy-duty work. The core drill is equipped with a built-in hydraulic torque limiter (ASCO system), which ensures maximum torque and prevents kickback when the drill is jammed. The core drill has an automatic integrated safety function that stops the core drill if it jams. However, in the event of jamming, always release the core bit from the material before you start drilling again. The integrated safety function is set at the factory and must not be disturbed.Hydraulics: 20 l/min. at 100-172 barDrill diameter: ø50-ø200Speed: 600 min-1Drive adapter: Including ½" BSP socket with a 1-1/4" UNC plug adapterSound pressure level 1 m LWA: 80 dB Vibration level: <2.5 m/s2 Weight: 7.6 kg

The DOA HD is a compact hydraulic hammer drill with SDS-PLUS chuck that has been specially designed for underwater use. With a weight of just 8.2 kg and a length of 47 cm, it is particularly suitable for working in confined spaces - for example during maintenance, in civil engineering or in underwater technology. The rotary hammer works with an oil volume of 10-50 l/min at 50-114 bar and achieves a speed of 625 min-¹ at 23 l/min and 4,460 blows per minute. The tool holder is designed for SDS-PLUS drill bits up to Ø 22.2 mm - with STANLEY-DEWALT drill bits, diameters up to 30 mm are even possible. Thanks to the integrated speed limiter and ergonomic handle, safe and controlled work is guaranteed even under difficult conditions. Important note: The safety low-pressure bypass valve (SN-DBV) must be ordered for operation under water. Ideal for use in the construction industry or for work in railway engineering when reliable drilling is required regardless of the weather. This rotary hammer is equipped with an SDS-PLUS tool holder. Hydraulics: 10-50 l/min. at 50-114 barSpeed: 625 min-1 at 23 L/min.Impact rate: 4460 min-1 HandleSDS-PLUS diameter max. D=22.2 mm (30 mm with STANLEY-DEWALT drill bits)Speed limitationATTENTION !!! Order SN-DBV at the same time!Dimensions: 47 cmWeight: 8.2 kg

The DOA HD is a robust hydraulic hammer drill with SDS-MAX drill chuck, specially designed as an underwater version for demanding work in diving applications. With its high impact power of 2,500 blows per minute, it is ideal for drilling in rock, concrete or masonry, even under extreme conditions. The HD hammer drill impresses with its compact design (50 cm long) and a weight of just 14 kg, which makes it easy to handle underwater. The speed is limited to 250 min-¹ with an oil flow rate of 23 l/min - this allows the tool to work in a powerful and controlled manner. The ergonomic handle and SDS-MAX tool holder enable safe and quick tool changes. Thanks to its hydraulic control with 10-50 L/min at 100 bar, the HD is suitable for a wide range of applications - particularly in underwater technology and in areas where conventional electric or compressed air-powered tools reach their limits. Important note: For safe and compliant operation under water, it is essential to order the appropriate safety low-pressure bypass valve (SN-DBV). Areas of application include the construction industry and railway engineering, wherever powerful and weather-independent underwater drilling is required. This hammer drill is equipped with an SDS-MAX tool holder. Hydraulics: 10-50 l/min. at 100 barSpeed: 250 min-1 at 23 L/min.Impact rate: 2500 min-1 HandleSDS-MAX tool holderSpeed limitationATTENTION !!! Order SN-DBV at the same time!Dimensions: 50 cmWeight: 14 kg

The HYCON HRD28X is a powerful, hand-held hydraulic rotary hammer with connection for air flushing, specially designed for demanding drilling work in granite, concrete or masonry. With its robust impact and rotation unit and the option of combining it with a compressor, it delivers reliable results even in deep holes of up to 6 metres. Thanks to the HEX 22x108 mm shank size and its high rotation (320 min-¹) and impact frequency (40 Hz), the HRD28X is ideal for drilling anchor holes, blast holes or splitting hard rock types. This device really comes into its own in confined spaces where no drill rig can be used. With an operating pressure of 130-172 bar at 30 l/min and a low weight of just 27.5 kg, the HRD28X remains easy to handle even when used for long periods. The low vibration level and air flushing also enable clean and efficient work - the rotary hammer can even be used under water and is therefore the preferred equipment of professional diving teams. The HRD28X is manufactured by HYCON and is ideal for applications in the construction industry, steel construction and underwater technology. The HYCON HRD-28-X is a hand-held high-performance hammer drill for the heaviest drilling tasks in granite and concrete and up to 6 m drilling depth.The use of standard integral drill steel with air flushing from an external compressor in combination with a powerful hydraulic impact and rotation unit makes the HRD-28-X a lighter, powerful and efficient rotary hammer. The HRD-28-X is ideal for making anchor holes and for blasting or splitting holes between 25 and 50 mm when you need to drill deeper with maximum air flushing. Together with a compressor of your choice, it is suitable for underwater drilling and is therefore the drilling tool favoured by professional divers. Because this hammer drill utilises the benefits of both hydraulics and pneumatics, it can be used anywhere, drill deeper and still be light enough to work with for many hours. Simply connect it to one of the compact HYCON hydraulic power packs and a compressor - and you're ready to go. Made for underwater and deep drilling For deeper hand-guided drilling in confined spaces that do not allow a drill rigLow weightPerfect for drilling holes for explosives or chemicals where more depth is requiredRecommended for drilling in granite with a depth of up to 6 m / Ø34 mm (depending on compressor)Contact one of our sales representatives for recommendations for deeper and wider holesHydraulics: 30 L/min at 130-172 barDrill steel shank size: HEX 22x108 mm Speed (anti-clockwise ccw): 320 min-1 Impact frequency: 40 Hz Sound power level: 105 dB LWADrilling flushing air: 10 m³/h Vibration level (3 axes): 13 m/s2 Dimensions: 708x460 mmWeight: 27.5 kg

The HYCON HRD30 is a powerful hydraulic rotary hammer with integrated compressor, specially developed for drilling in granite, concrete and other hard materials up to a depth of 2.4 metres. The integrated air flushing eliminates the need for an external compressor - saving space, time and logistics costs on the construction site. Thanks to the high impact energy, the HRD30 enables fast and precise drilling performance. The integrated cyclone filter technology ensures an optimised air flow and extended maintenance intervals, which significantly increases reliability in continuous use. The anti-vibration handles offer a high level of operating comfort and enable fatigue-free use even over longer periods. The rotary hammer is ideal for applications in the construction and infrastructure sectors, especially when many smaller holes in granite or concrete are required. In combination with the compact, portable hydraulic power packs from HYCON (optionally with petrol, diesel or electric motor), the result is a particularly mobile and powerful drilling package - also for indoor projects or tunnel construction. Ideal for professional use in the construction industry, in steel construction or for demolition work and recycling. Also suitable for underwater drilling in combination with a compressor.The HRD30 Rock Drill is a high-performance hydraulic drill designed for hard drilling applications in concrete and granite at depths of up to 2.4 metres. With the integrated compressor, you don't need to bring an external compressor to the construction site. In addition, it works quickly and makes precise and circular holes due to the high impact energy. The anti-vibration handles increase comfort for the operator and enable longer working intervals. This gives the HRD30 rock drill a high price/performance ratio and makes it a unique and attractive choice for rock drilling applications - especially when multiple smaller holes are required in granite or concrete. The improvement of HRD30 includes a significant improvement of the overall design and the development of a unique cyclone filter system that ensures a better air flow for the integrated air flushing compressor. The design of the integrated cyclone filter provides longer intervals between cleaning and replacement of the filter, resulting in a more reliable and effective rock drill.HYCON's small compact hydraulic power packs, available with petrol or diesel engines or with electric motors for indoor or tunnel projects, offer you the perfect powerful and highly mobile drilling package.Hydraulics: 30 l/min at 150-172 barDrill steel shank size: HEX 22x108 mm Speed (anti-clockwise ccw): 320 min-1 Impact frequency: 40 Hz Sound power level: 105 dB LWADrilling flushing air: 10 m³/h Vibration level (3 axes): 13 m/s2 Dimensions: 722x460 mmWeight: 29 kg

The HYDRA SL150 is a particularly compact drill rig for mounting on small carrier machines such as mini excavators, mobile cranes or trailers. It was specially developed for mobile applications in confined spaces and is ideal for light to medium-duty drilling work in the field or on construction sites. Equipped with its own control unit for swivelling and lifting control, the SL150 enables precise work. The integrated hydraulic geared motor ensures reliable up and down movement of the drill head. The carriage is available in various stroke lengths from 1250 to 3250 mm and can be customised with different rotary heads, augers and accessory modules. Lightweight drill carriage for small carrier machines and vehiclesSuitable for mini excavators, mobile cranes or trailers, for exampleScope of delivery:Complete with control panel for controlling the head slewing direction and the up and down movement of the gondolaA hydraulic gear motor in the upper part of the carriage allows the swivel head to be raised and loweredAvailable carriage stroke lengths:1250 mm 1750 mm 2250 mm 3250 mm Optional: Available rotary heads:TR-22, 980 Nm TR-150, 1570 Nm TR-350, 3430 Nm Mountable augers:T1 T2 T3 T4 T5 Mechanical turning saddleMechanical clamping jaw for drill rods: MD-135 for D=30 - 135 mmDouble-rotating hydraulic rotating saddle, 360° vertical and horizontal rotationWinchSupport feet for horizontal drillingRadio remote control

The HYDRA SL400 is a robust drill rig for attachment to medium-heavy carrier machines such as excavators from 10 to 30 tonnes. Designed for demanding applications, it offers a long stroke length, powerful torques and modular equipment - ideal for professional drilling projects in earthworks or specialised civil engineering. The SL400 can be operated intuitively via a control console with precise swivelling and lifting control. The integrated hydraulic geared motor raises and lowers the swivelling head, supported by a thrust bearing for smooth sliding rotation. Stroke lengths of 3250 mm or 4750 mm are available depending on requirements. This makes the carriage particularly suitable for deep holes with high loads. Large drilling carriage for carrier machines and vehicles weighing 10 - 30 tonnesSuitable for medium-heavy excavatorsScope of delivery: Complete with control panel for controlling the head slewing direction and the up and down movement of the gondolaA hydraulic gear motor in the upper part of the carriage allows the swivel head to be raised and lowered Axial bearing for sliding rotationAvailable carriage stroke lengths:3250 mm4750 mmOptional: Available rotary heads:TR-600, 5880 NmTR-900, 8820 NmTR-1200, Nm Mountable augers: T-8000 Mountable hammer: THOR-1300Mechanical/hydraulic rotating saddleMechanical clamping jaw for drill rods:MD-205 D= 40 - 205 mm MD-305 D= 40 - 305 mmMD-505 D= 40 - 505 mmDouble rotating hydraulic rotating saddle, 360° vertical and horizontal rotationWinchSupport feet for horizontal drillingRadio remote control

The HYDRA SL600 is the most powerful model in the HYDRA carriage series - designed for mounting on heavy excavators and carrier machines with 20 to 40 tonnes. Thanks to its robust design and enormous stroke lengths, it is ideal for deep drilling and heavy drilling rigs, especially in geothermal energy and specialised civil engineering. The drill carriage is supplied with a control panel for controlling the swivelling movement and lifting mechanism. An integrated hydraulic geared motor ensures precise positioning of the swivelling head. With available stroke lengths of 3400 mm and 6400 mm, the SL600 is designed for particularly deep and power-intensive drilling projects, even in the hardest ground. Very large drill carriage for small carrier machines and vehicles of 20 - 40 tonnesSuitable for heavy excavatorsScope of delivery: Complete with control panel for controlling the head slewing direction and the up and down movement of the gondolaA hydraulic gear motor in the upper part of the carriage allows the swivel head to be raised and loweredAvailable carriage stroke lengths:3400 mm6400 mmOptional: Available swivel heads: TR-1200, Nm Mountable augers: T-8000T-12000T-16000 Mountable hammers: THORMechanical/hydraulic rotary saddleMechanical clamping jaw for drill rods:MD-205 D= 40 - 205 mm MD-305 D= 40 - 305 mm MD-505 D= 40 - 505 mm Double rotating hydraulic rotating saddle, 360° vertical and horizontal rotationWinchSupport feet for horizontal drillingRadio remote control

The STANLEY DL07 - Hydraulic drilling machine with a D=13 mm drill chuck is a powerful, compact tool for professional drilling work under water. It is suitable for drilling in wood, metal and masonry up to Ø 13 mm and impresses with a robust drill chuck, ergonomic handle and reversible direction of rotation. With a hydraulic range of 11-45 l/min at 70-140 bar and a speed of 1000 min-¹ at 30 l/min, it offers reliable performance - even under extreme conditions. Typical areas of application include the construction industry, steel construction, demolition and recycling work. The DL07 comes from the renowned manufacturer STANLEY® and is available from KW Hydraulik - your expert for high-quality hydraulic tools.The STANLEY® drill is suitable for drilling holes in wood, metal or masonry up to 13mmbore diameter.Drill chuck up to 13mm HandleReversible direction of rotationHydraulics: 11-45 l/min. at 70-140 barSpeed: 1000 min-1 at 30 L/min.Dimensions: 230x100 mmWeight: 2.7 kg

The STANLEY HD01 - Hydraulic rotary hammer with SDS-PLUS chuck is a versatile and powerful tool for demanding applications in construction, industry and trade. With a switchable percussion mechanism, the HD01 is suitable for powerful drilling in rock, concrete and masonry as well as for precise drilling work in metal, wood or plastic. The SDS-PLUS tool holder allows drill bits to be changed quickly - an optional chuck with adapter (½") is also available. With a hydraulic output of 11-34 l/min at 50-114 bar, a speed of 800 min-¹ (at 23 l/min) and an impact rate of 4200 min-¹, the STANLEY HD01 impresses with its efficiency and penetrating power. An ergonomic handle, depth stop and integrated speed limiter ensure safe and convenient operation. Drill diameters up to 22.2 mm - even up to 30 mm with STANLEY-DEWALT drill bits - make it the ideal solution for professional requirements. Typical areas of application are the construction industry, steel construction and demolition and recycling work. The HD01 comes from the renowned manufacturer STANLEY® and is available from KW Hydraulik - your expert for robust and precise hydraulic tools. The new STANLEY® HD-01 hammer drill is an impact drill with a switchable impact function.With the percussion function switched on, it can be used for drilling in rock, concrete or masonry. With the impact function switched off, it can be used for drilling in metal, wood and plastic. It is equipped with an SDS-PLUS tool holder. A chuck (1/2") with adapter is available as an accessory. Hydraulics: 11-34 l/min. at 50-114 barSpeed: 800 min-1 at 23 L/min.Impact speed: 4200 min-1 Switchable impact mechanismHandleDepth stopSDS-PLUS diameter max. D=22.2 mm (30 mm with STANLEY-DEWALT drill bits)Speed limiterDimensions: 36x14 cmWeight: 4.1 kg

The STANLEY HD45 - hydraulic hammer drill with SKIL-736 chuck (HEX 19x108 mm) is a robust impact tool for particularly tough applications - even under water. Thanks to its high performance and versatile features, the HD45 is ideal for drilling in concrete, asphalt or masonry with diameters from 9.5 to 50 mm and a drilling depth of up to 90 cm. Drilling diameters of up to 76 mm are even possible with core drills. The adjustable speed from 50 to 300 min-¹, the hydraulic range of 26-34 l/min at 140 bar and the integrated nitrogen pressure accumulator guarantee constant impact force with precise control. Equipped with clockwise/anticlockwise rotation, hose whips with flat-face connections (ISO 16028) and a proven SKIL-736 drill chuck, the HD45 fulfils the highest demands in professional use. The underwater version of the STANLEY HD45 is designed especially for the construction industry, steel construction and tough demolition and recycling work. The tool weighs 21 kg and measures 57 cm - compact and powerful at the same time. This professional tool is available directly from KW Hydraulik - your certified partner for high-quality hydraulic solutions from STANLEY®. The STANLEY® HD-45 rotary hammer drill is a rotary percussion tool for drilling in concrete,masonry or asphalt.Hydraulics: 26-34 l/min. at 140 barAdjustable speed 50 to 300 min-1Drilling diameter from 9.5 to 50 mm / 90 cm drilling depthDrilling diameter with core drills up to 76 mmHose whips with flat-face connections (ISO-16028)Nitrogen pressure accumulatorClockwise / anti-clockwise rotationUnderwater versionDimensions: 57 kgWeight: 21 kg