Generators / magnets / welding equipment
Generators, solenoids and welding equipment all from a single source at KW Hydraulik. Our wide range of products in this category allows you to get the power and performance you need for your projects. Discover the world of
Discount
%
DY-CMG-PRO-10kW-220VDC-41
CMG-PRO10kW - Hydraulically driven magnet-generator 10 kW - Mounting on the magnet
DY-CMG-PRO-10kW-220VDC-41
DY-CMG-PRO-10kW-220VDC-41
The CMG-PRO10kW from Dynaset is an efficient magnet generator for direct mounting on the magnet, especially for demanding lifting and sorting applications. With an output of 10 kW, it supplies an operating voltage of 220 VDC for solenoid coils with a resistance of 5.4-100 ohms.
The integrated demagnetisation in just 0.8 s ensures fast work cycles. Thanks to innovative pressure accumulator technology, a leakage oil connection is no longer required - the generator can withstand up to 50 bar back pressure on the tank line.
Typical applications can be found in construction, municipal and recycling machines as well as in mobile magnet systems. Further solutions of this type can be found under Dynaset power generators.
Hydraulics: 44-69 l/min (max. internally limited) at max. 350 barGenerator output: 10 kWMax solenoid coil power: 1.0- 9.1 kWDemagnetisation: 0.8 sSolenoid coil resistance (20C°): 5.4-100 OhmOperating voltage: 220 VDCAuxiliary current: OptionalNEW! The new CMG generation from Dynaset is equipped with a pressure accumulator that enables 50 bar back pressure in the tank line instead of the 5 bar of the previous models. Therefore, no leakage line is required.
Discount
%
DY-CMG-PRO-15kW-220VDC-64
CMG-PRO15kW - Hydraulically driven magnet generator 15 kW - Mounting on the magnet
DY-CMG-PRO-15kW-220VDC-64
DY-CMG-PRO-15kW-220VDC-64
The CMG-PRO15kW from Dynaset is a powerful solenoid generator for direct mounting on the solenoid. It delivers up to 15 kW of power at an operating voltage of 220 VDC - ideal for demanding solenoid applications with coil resistances between 3.6 and 50 ohms.
Thanks to fast demagnetisation in just 0.8 seconds, the generator enables efficient and rapid work cycles. The new CMG generation is equipped with an integrated pressure accumulator and can withstand back pressure of up to 50 bar - eliminating the need for a leakage oil connection.
Ideal for attachments on construction, municipal and recycling machines. Further generator solutions from Dynaset can be found in the Dynaset power generator overview.
Hydraulics: 68-102 L/min (max. internally limited) at max. 260 barGenerator output: 15 kWMax solenoid coil power: 14.5 kWDemagnetisation: 0.8 sSolenoid coil resistance (20C°): 3.6 - 50 OhmOperating voltage: 220 VDCAuxiliary current: OptionalNEW! The new CMG generation from Dynaset is equipped with a pressure accumulator that allows 50 bar back pressure in the tank line instead of the 5 bar of the previous models. Therefore, no leakage line is required.
Discount
%
DY-CMG-PRO-20kW-220VDC-92
CMG-PRO20kW - Hydraulically driven solenoid generator 20 kW - Mounting on the solenoid
DY-CMG-PRO-20kW-220VDC-92
DY-CMG-PRO-20kW-220VDC-92
The CMG-PRO20kW from Dynaset is a robust magnet generator for direct mounting on the magnet that delivers up to 20 kW of power at 220 VDC operating voltage. With a maximum solenoid coil output of 19.5 kW and a coil resistance of 2.6-50 ohms, it is ideal for demanding lifting and sorting applications.
Particularly efficient: The demagnetisation time of just 0.8 seconds significantly shortens work cycles. The new CMG series has an integrated pressure accumulator that allows a back pressure of up to 50 bar - meaning that a leakage oil connection is no longer required.
Ideal for use with attachments for construction, municipal or recycling machines. Further variants and suitable generator solutions can be found under Dynaset power generators.
Hydraulics: 94 l/min (max. internally limited) at 210 barGenerator output: 20 kW Max solenoid coil power: 19.5 kWDemagnetisation: 0.8sSolenoid coil resistance (20C°): 2.6 - 50 OhmOperating voltage: 220 VDCAuxiliary current: OptionalNEW! The new CMG generation from Dynaset is equipped with a pressure accumulator that allows 50 bar back pressure in the tank line instead of the 5 bar of the previous models. Therefore, no leakage line is required.
Discount
%
DY-CMG-PRO-30kW-220VDC-120
CMG-PRO30kW - Hydraulically driven magnet generator 30 kW - Mounting on the magnet
DY-CMG-PRO-30kW-220VDC-120
DY-CMG-PRO-30kW-220VDC-120
The CMG-PRO30kW from Dynaset is a powerful magnet generator for direct mounting on the magnet, developed for the toughest industrial applications. With a generator output of 30 kW at 220 VDC and a maximum solenoid coil output of 29.5 kW, this model is suitable for large solenoid applications, for example in the scrap and recycling industry.
Thanks to a demagnetisation time of just 0.8 seconds, the generator works quickly and efficiently. The current CMG generation is equipped with an integrated pressure accumulator that allows up to 50 bar back pressure in the return line - a leakage oil line is no longer required.
Ideal for use with attachments for construction and municipal machinery. Further generator variants can be found under Dynaset power generators.
Hydraulics: 122 l/min (max. internally limited) at 210 barGenerator output: 30 kWMax solenoid coil output: 29.5 kWDemagnetisation: 0.8sSolenoid coil resistance (20C°): 1.8-100 OhmOperating voltage: 220 VDCAuxiliary current: OptionalNEW! The new CMG generation from Dynaset is equipped with a pressure accumulator that enables 50 bar back pressure in the tank line instead of the 5 bar of the previous models. Therefore, no leakage line is required.
Discount
%
DY-CMG-PRO-3kW-220VDC-18
CMG-PRO3kW - Hydraulically driven magnet generator 3 kW - Mounting on the magnet
DY-CMG-PRO-3kW-220VDC-18
DY-CMG-PRO-3kW-220VDC-18
The CMG-PRO3kW from Dynaset is a compact magnet generator that can be mounted directly on the magnet for applications with low power requirements. With a generator output of 3 kW at 220 VDC and a solenoid coil output of 0.5 to 3 kW, this model is ideal for smaller lifting magnets or precise separation tasks in industry and recycling.
Demagnetisation takes place in just 0.8 seconds. The new generation is equipped with an integrated pressure accumulator that allows back pressure of up to 50 bar - a leakage oil line is not required.
Perfectly suited for attachments in construction and municipal technology. Discover more Dynaset power generators in our range.
Hydraulics: 21-31 l/min (max. internally limited) at max. 350 bar Generator output: 3 kWMax solenoid coil output: 0.5 - 3 kWDemagnetisation: 0.8 sSolenoid coil resistance (20C°): 15-100 OhmOperating voltage: 220 VDCAuxiliary current: OptionalNEW! The new CMG generation from Dynaset is equipped with a pressure accumulator that enables 50 bar back pressure in the tank line instead of the 5 bar of the previous models. Therefore, no leakage line is required.
Discount
%
DY-CMG-PRO-40kW-220VDC-165
CMG-PRO40kW - Hydraulically driven solenoid generator 40 kW - Mounting on the solenoid
DY-CMG-PRO-40kW-220VDC-165
DY-CMG-PRO-40kW-220VDC-165
The CMG-PRO40kW from Dynaset is the most powerful model in the new CMG series for direct mounting on the magnet. With a generator output of 40 kW and a maximum solenoid coil output of 39.5 kW, it is ideal for demanding lifting and sorting tasks in the scrap, construction and recycling sectors.
Thanks to fast demagnetisation (0.8 s) and 220 VDC operating voltage, the system works reliably and efficiently. The new CMG generation is equipped with a pressure accumulator that allows a back pressure of up to 50 bar - a leakage oil line is not required.
Ideal for use on attachments for construction, agricultural and municipal machinery. Further variants can be found in the overview of Dynaset solenoid generators.
Hydraulics: 167 l/min (max. internally limited) at 210 barGenerator output: 40 kWMax solenoid coil output: 39.5 kWDemagnetisation: 0.8sSolenoid coil resistance (20C°): 1.3 - 100 OhmOperating voltage: 220 VDCAuxiliary current: OptionalNEW! The new CMG generation from Dynaset is equipped with a pressure accumulator that enables 50 bar back pressure in the tank line instead of the 5 bar of the previous models. Therefore, no leakage line is required.
Discount
%
DY-CMG-PRO-6kW-220VDC-30
CMG-PRO6kW - Hydraulically driven magnet generator 6 kW - Mounting on the magnet
DY-CMG-PRO-6kW-220VDC-30
DY-CMG-PRO-6kW-220VDC-30
The CMG-PRO6kW from Dynaset is a compact and efficient hydraulic generator for direct solenoid mounting, ideal for light to medium applications in scrap handling or material handling. With a generator output of 6 kW and a maximum solenoid coil output of 5.5 kW, it delivers reliable performance in a compact design.
Thanks to fast demagnetisation in just 0.8 seconds and an operating voltage of 220 VDC, it is ideal for demanding load changes. The new CMG generation does not require a leakage oil line - made possible by an integrated pressure accumulator with back pressure of up to 50 bar.
Ready for use with attachments for construction, agricultural and municipal machinery. Further sizes and variants can be found in the overview of Dynaset magnet generators.
Hydraulics: 3248 l/min (max. internally limited) at max. 350 barGenerator output: 6 kWMax solenoid coil power: 0.5 -5.5 kWDemagnetisation: 0.8 s Solenoid coil resistance (20C°): 8.8-100 OhmOperating voltage: 220 VDCAuxiliary current: OptionalNEW! The new CMG generation from Dynaset is equipped with a pressure accumulator that enables 50 bar back pressure in the tank line instead of the 5 bar of the previous models. Therefore, no leakage line is required.
Discount
%
DY-HG4,1W-E230SE54-25-VF
HG04,1 - Hydraulically driven generator, 4.1 kVA, IP54
DY-HG4,1W-E230SE54-25-VF
DY-HG4,1W-E230SE54-25-VF
The HG4.1 from Dynaset is a compact and reliable power generator for hydraulic operation. With a rated output of 4.1 kVA and two 230 V sockets (17.8 A), the device is ideal for use on mobile machinery, in construction or for municipal applications.
The generator is operated via a hydraulic system with 28-37 l/min at max. 210 bar. The integrated hydraulic motor with overflow valve and bypass ensures safe and trouble-free operation. The equipment with AVR voltage regulation and FLC frequency control ensures a constant, high-quality power supply - even with changing requirements.
Thanks to protection class IP54, the HG4.1 is protected against dust and splash water, making it ideal for outdoor use. The model is also optionally available with a cable outlet without sockets.
You can find other suitable models in the Dynaset power generators category. The generator is ideal for attachments in construction, agricultural and municipal machinery.
For connection to a hydraulic systemHydraulics: 28-37 l/min at max. 210 bar Hydraulic motor with overflow valve and bypassGenerator: - output 4.1 kVA - 230 volts / 17.8 A / 2 socketsVoltage regulation: AVRFrequency control: FLCProtection class IP54Available on request with cable outlet without sockets.
Discount
%
DY-HG1kW-14VDC23-12-K
HG1 - Hydraulically driven direct current generator, 1.0 kVA, IP 23
DY-HG1kW-14VDC23-12-K
DY-HG1kW-14VDC23-12-K
The HG1 direct current generator from Dynaset supplies reliable 14 V direct current at 70 A and is ideal for use on mobile machines, in workshop vehicles or for off-grid applications in outdoor areas. The compact design enables easy integration into existing hydraulic systems.
The generator is operated hydraulically with a flow range of 14-34 l/min at up to 210 bar. The integrated hydraulic motor with overflow valve and bypass ensures safe and long-lasting use. The IP23 protection class protects the device against water spray and solid foreign bodies, making it ideal for protected outdoor use.
As part of the Dynaset power generator series, the HG1 is particularly suitable for applications in the field of attachments for construction, agricultural and municipal machinery.
For connection to a hydraulic systemHydraulics: 14-34 l/min. at max. 210 barHydraulic motor with overflow valve and bypassGenerator: 14 volt direct current 70 AProtection class IP23
Discount
%
DY-HG10E-E400ST23-49-VF
HG10 - Hydraulically driven generator, 10 kVA, IP 23
DY-HG10E-E400ST23-49-VF
DY-HG10E-E400ST23-49-VF
The DYNASET HG10 is a hydraulically driven generator with a rated output of 10 kVA, designed for use in mobile, on-site or stand-alone power supply solutions. It is connected directly to an existing hydraulic system with 52-78 l/min at max. 210 bar.Equipped with a hydraulic motor including overcurrent valve and bypass function, the HG10 ensures a reliable and consistent power supply under demanding conditions. The integrated AVR voltage regulation ensures constant voltage output, while the FLC frequency control compensates for fluctuations - particularly important when operating sensitive power tools.Hydraulics: 52-78 l/min at max. 210 barHydraulic motor with overflow valve and bypass.Generator:- Output 10 kVA- 230 Volt / 21.7 A / 2 sockets - 400 Volt / 14.4 A / 1 socket Voltage regulation: AVRFrequency control: FLCProtection class IP23
Discount
%
DY-HG10,1W-E400ST54-49-VF
HG10,1 -Hydraulically driven generator, IP 54
DY-HG10,1W-E400ST54-49-VF
DY-HG10,1W-E400ST54-49-VF
The HG10.1 from Dynaset is a hydraulically driven generator with an output of 10.1 kVA, which is ideal for mobile use in demanding conditions. Thanks to protection class IP54, the generator set is optimally protected against dust and splash water - ideal for outdoor use in the construction, municipal or agricultural sectors.
The generator is driven by a hydraulic system with 52-73 l/min at max. 210 bar. An integrated hydraulic motor with overflow valve and bypass ensures a reliable and constant power supply. The AVR voltage regulation and FLC frequency control ensure stable power quality - even with fluctuating loads.
Equipped with two 230 V sockets (21.7 A) and one 400 V socket (14.6 A), the generator is suitable for numerous applications on mobile machinery. Alternatively, a version with a cable outlet without sockets is also available.
Ideal for use on attachments for construction, agricultural and municipal machinery.
Further variants can be found under Dynaset power generators.
For connection to a hydraulic systemHydraulics: 52-73 l/min at max. 210 bar Hydraulic motor with overflow valve and bypassGenerator:- Output 10.1 kVA230 volts / 21.7 A / 2 sockets -400 volts / 14.6 A / 1 socket Voltage regulation: AVRFrequency control: FLCProtection class IP54Available on request with cable outlet without sockets.
Discount
%
DY-HG12F-E400ST23-54-VF
HG12 - Hydraulically driven generator, 12 kVA, IP 23
DY-HG12F-E400ST23-54-VF
DY-HG12F-E400ST23-54-VF
The DYNASET HG12 is the more powerful alternative to the HG10. With 12 kVA output power and an extended hydraulic range of 56-84 l/min, designed for applications with increased power requirements, such as in concrete construction, track construction or on mobile workshop units. Like all generators in the DYNASET series, the HG12 is also connected directly to an existing hydraulic system with max. 210 bar. The integrated hydraulic motor with overflow valve and bypass function reliably protects the unit during load peaks and ensures stable power output - even in continuous operation.The combination of AVR voltage regulation and FLC frequency control guarantees a clean, constant voltage. Ideal for the safe operation of sensitive consumers such as measuring devices, welding equipment or pump systems.Hydraulics: 56-84 l/min at max. 210 bar Hydraulic motor with overflow valve and bypassGenerator:- Output 12 kVA- 230 volts / 26.1 A / 2 sockets - 400 Volt / 17.3 A / 1 socket Voltage regulation: AVRFrequency control: FLCProtection class IP23
Discount
%
DY-HG12,1W-E400ST54-54-VF
HG12,1 - Hydraulically driven generator, IP 54
DY-HG12,1W-E400ST54-54-VF
DY-HG12,1W-E400ST54-54-VF
The HG12.1 from Dynaset is a robust generator with an output of 12.1 kVA that has been specially developed for mobile use in harsh environmental conditions. Thanks to protection class IP54, the device is reliably protected against dust and splash water - ideal for applications on construction sites or municipal machines.
The generator is operated hydraulically and requires 58-81 l/min at max. 210 bar. An integrated hydraulic motor with overflow valve and bypass ensures safe, smooth operation. Thanks to the AVR voltage regulation and FLC frequency control, the power quality remains stable - even during load changes.
With two 230 V sockets (26.1 A) and one 400 V socket (17.5 A), the HG12.1 is versatile - e.g. for power tools, lighting systems or welding equipment. A version with a cable outlet without sockets is available on request.
Ideal for use on attachments for construction, agricultural and municipal machinery.
You can find more models in our overview of Dynaset power generators.
For connection to a hydraulic systemHydraulics: 58-81 l/min at max. 210 bar Hydraulic motor with overflow valve and bypassGenerator:- Output 12.1 kVA230 volts / 26.1 A / 2 sockets -400 volts / 17.5 A / 1 socket Voltage regulation: AVRFrequency control: FLCProtection class IP54Available on request with cable outlet without sockets.
Discount
%
DY-HG15,1W-E400ST54-63-K
HG15,1 - Hydraulically driven generator, IP 54
DY-HG15,1W-E400ST54-63-K
DY-HG15,1W-E400ST54-63-K
The HG15.1 from Dynaset is a powerful, hydraulically driven generator with an output of 15.1 kVA that has been specially developed for use in demanding environments. The IP54 protection class ensures reliable protection against dust and splash water - ideal for mobile applications in the construction industry or in municipal technology.
The generator is operated via a hydraulic system and requires 65-85 l/min at max. 210 bar. A robust hydraulic motor with overflow valve and bypass ensures high operational reliability. The combination of AVR voltage regulation and FLC2 frequency control guarantees a stable, high-quality power supply - even under fluctuating loads.
Equipped with two 230 V sockets (32.6 A) and one 400 V socket (21.8 A), the HG15.1 is ideally suited for operating tools, power units or lighting systems. A version with a cable outlet without sockets is available as an option.
Perfectly suited for attachments for construction, agricultural and municipal machinery.
Further models and outputs can be found in the Dynaset power generator overview.
For connection to a hydraulic systemHydraulics: 65-85 l/min at max. 210 bar Hydraulic motor with overflow valve and bypassGenerator: - output 15.1 kVA -230 Volt / 32.6 A / 2 sockets -400 Volt / 21.8 A / 1 socket Voltage regulation: AVR Frequency control: FLC2Protection class IP54Available on request with cable outlet without sockets.
Discount
%
DY-HG2kW-28VDC23-24-K
HG2 - Hydraulically driven direct current generator, 2.0 kVA, IP 23
DY-HG2kW-28VDC23-24-K
DY-HG2kW-28VDC23-24-K
The HG2 DC generator from Dynaset is the powerful solution for mobile power supply with 28 V DC at 70 A. Designed for operation via a hydraulic system, it is ideal for vehicles, mobile workshops or machines in the field.
Thanks to a hydraulic requirement of 26-44 l/min at up to 210 bar and a robust hydraulic motor with integrated overflow valve and bypass, the generator ensures safe continuous operation even under demanding conditions. The IP23 protection class makes it resistant to water spray and foreign bodies - ideal for protected outdoor use.
As part of the Dynaset generator series, the HG2 is ideal for use in attachments for construction, agricultural and municipal machinery.
For connection to a hydraulic systemHydraulics: 26-44 l/min at max. 210 barHydraulic motor with overflow valve and bypassGenerator: 28 volt direct current 70 AProtection class IP23
Discount
%
DY-HG20,1W-E400ST54-78-K
HG20,1 - Hydraulically driven generator, IP 54
DY-HG20,1W-E400ST54-78-K
DY-HG20,1W-E400ST54-78-K
The HG20.1 from Dynaset is a powerful, hydraulically driven generator with a rated output of 20.1 kVA - ideal for professional use on construction sites, in mobile workshops or for municipal applications. Thanks to protection class IP54, the generator set is optimally protected against dust and splash water.
Driven by a hydraulic system with 82-97 l/min at max. 210 bar, the generator provides a reliable power supply for appliances and machines. An integrated hydraulic motor with overflow valve and bypass ensures a high level of operational safety. The AVR voltage regulation and FLC frequency control ensure constant voltage and frequency values - even with varying loads.
The HG20.1 offers two 230 V sockets (43.7 A) and one 400 V socket (29.0 A) and is therefore versatile in use. A version with cable outlet without sockets is optionally available.
You can find more suitable applications under Attachments for construction, agricultural and municipal machinery as well as other variants in the overview of all Dynaset power generators.
For connection to a hydraulic system
Hydraulics: 82-97 l/min at max. 210 bar Hydraulic motor with overflow valve and bypassGenerator:- Output 20.1 kVA- 230 Volt / 43.7 A / 2 sockets - 400 Volt / 29.0 A / 1 socket Voltage regulation: AVRFrequency control: FLCProtection class IP54Available on request with cable outlet without sockets.
Discount
%
DY-HG26G-E400ST23-100-K
HG26 - Hydraulically driven generator, 26 kVA, IP 23
DY-HG26G-E400ST23-100-K
DY-HG26G-E400ST23-100-K
The HG26 from Dynaset is a particularly powerful, hydraulically driven generator for demanding applications in industry, construction and mobile power supply. With a rated output of 26 kVA, it is ideal for supplying several powerful consumers at the same time - for example welding equipment, mobile workshop technology or construction site equipment.
230 V and 400 V consumers can be reliably connected via the terminal box(230 V / 56.3 A, 400 V / 37.5 A). It is operated via a hydraulic system with a flow range of 106-130 l/min at max. 250 bar. A robust hydraulic motor with overflow valve and bypass ensures reliable protection and smooth operation even under high loads.
With AVR voltage regulation and FLC frequency control, the HG26 offers consistently stable power quality. Thanks to protection class IP23, the generator is suitable for use in protected outdoor areas - e.g. on mobile units or machines with limited space.
Discover other generators from Dynaset, e.g. the more compact HG12 with 12 kVA for medium power requirements.
KW Hydraulik - your system partner for mobile and hydraulically driven power supplies.
Hydraulics: 106-130 l/min at max. 250 barHydraulic motor with overflow valve and bypass.Generator:- Output 26 kVA- 230 Volt / 56.3 A- 400 Volt / 37.5 A- Terminal boxVoltage regulation: AVRFrequency control: FLCProtection class IP23
Discount
%
DY-HG3,5S-E230SE23-15-VF
HG3.5 - Hydraulically driven generator, 3.5 kVA , IP 23
DY-HG3,5S-E230SE23-15-VF
DY-HG3,5S-E230SE23-15-VF
The HG3.5 from Dynaset is a particularly compact, hydraulically driven generator with a rated output of 3.5 kVA - ideal for flexible use on mobile machines, vehicles or in agricultural equipment. Thanks to its low hydraulic requirement(18-23 l/min at max. 210 bar), it can be easily integrated into existing hydraulic systems.Two 230 V sockets with 15.2 A output current reliably supply tools, lighting systems or chargers. The capacitor-based voltage regulation reduces maintenance costs, while the integrated frequency monitoring (FLC) ensures consistent performance. A robust hydraulic motor with overcurrent valve and bypass provides additional protection for the system.Thanks to protection class IP23, the HG3.5 is ideal for protected outdoor use - whether on construction sites, municipal vehicles or service units.Further information on suitable applications can be found in the attachments for construction, agricultural and municipal machinery section.Our Dynaset power generators category provides an overview of all available variants.KW Hydraulik - Your solution for mobile, robust power supply based on hydraulics. Hydraulics: 18-23 l/min at max. 210 bar Hydraulic motor with overflow valve and bypass Generator:- Output 3.5 kVA - 230 volts - 15,2 A - 2 sockets Voltage regulation: Capacitor Frequency control: FLC Protection class IP23
Discount
%
DY-HG30,1W-E400ST54-90-K
HG30,1 - Hydraulically driven generator, IP 54
DY-HG30,1W-E400ST54-90-K
DY-HG30,1W-E400ST54-90-K
The HG30.1 from Dynaset is a robust, hydraulically operated power generator with a rated output of 30.1 kVA and is ideal for demanding applications in construction, the municipal sector or on mobile service units.
Driven by a hydraulic system with 95-120 l/min at max. 210 bar, the generator reliably supplies energy for powerful consumers. The integrated hydraulic motor with overflow valve and bypass reliably protects the system in continuous operation. Thanks to AVR voltage regulation and FLC frequency monitoring, constant power quality is guaranteed - even with fluctuating loads.
With two 230 V sockets (65.2 A) and one 400 V socket (43.3 A), the HG30.1 is versatile in use. The IP54 protection class guarantees use even in dusty and splash water environments.
You can find other suitable models in the overview of all Dynaset power generators and in the attachments for construction, agricultural and municipal machinery section.For connection to a hydraulic systemHydraulics: 95-120 l/min at max. 210 bar Hydraulic motor with overflow valve and bypassGenerator: -output 30.1 kVA - 230 volts / 65.2 A / 2 sockets - 400 volts / 43.3 A / 1 socketVoltage regulation: AVR Frequency control: FLC Protection class IP54
Discount
%
DY-HG35G-E400ST23-130-K
HG35 - Hydraulically driven generator, 35 kVA, IP23
DY-HG35G-E400ST23-130-K
DY-HG35G-E400ST23-130-K
The HG35 from Dynaset is a powerful hydraulically driven generator for demanding mobile applications. With a rated output of 35 kVA, it offers a reliable power supply for power-hungry consumers - ideal for large machines, construction site applications or utility vehicles.
Thanks to the robust hydraulic motor with overcurrent valve and bypass, the generator is optimally protected and can be safely integrated into existing hydraulic systems. The hydraulic requirement is between 137-170 l/min at up to 250 bar, making the HG35 suitable for powerful applications.
The generator has a terminal box, 75 A at 230 V and 50.5 A at 400 V, which makes it particularly flexible in use. The integrated AVR voltage regulation ensures a constant voltage even during load changes, while the frequency control (FLC) guarantees a stable frequency. With protection class IP23, it can be used outdoors under normal conditions without any problems.
Further information on suitable applications can be found in the attachments for construction, agricultural and municipal machinery section.
Our range of Dynaset power generators provides an overview of all available versions and alternatives.
KW Hydraulik - Your partner for mobile power supply with hydraulic drive.
Hydraulics: 137-170 l/min at max. 250 barHydraulic motor with overflow valve and bypass.Generator:- 35 kVA output- 230 Volt / 75 A- 400 Volt / 50.5 A- Terminal boxVoltage regulation: AVRFrequency control: FLCProtection class IP23
Discount
%
DY-HG45C-E400SS23-90-K
HG45 - Hydraulically driven generator, 45 kVA, IP 23
DY-HG45C-E400SS23-90-K
DY-HG45C-E400SS23-90-K
The Dynaset HG45 is a powerful hydraulic generator for continuous professional use. With an output of 45 kVA, 97.4 A at 230 V and 64.9 A at 400 V, it reliably supplies heavy loads on construction sites or in mobile workshops.
Thanks to AVR voltage regulation and frequency control (FLC), the generator delivers stable power quality - even with changing loads. The robust hydraulic motor operates at 93-123 l/min at up to 420 bar and has an overflow valve with bypass for maximum safety.
With protection class IP23, the HG45 is ideal for outdoor use.
Further application examples can be found in the section on attachments for construction, agricultural and municipal machinery.
You can also find the complete range of Dynaset power generators here.
Hydraulics: 93-123 l/min at max. 420 bar Hydraulic motor with overflow valve and bypass. Generator:- output 45 kVA- 230 Volt / 97.4 A- 400 Volt / 64.9 A- Terminal boxVoltage regulation: AVRFrequency control: FLCProtection class IP23
Discount
%
DY-HG5S-E230SE23-21-VF
HG5 - Hydraulically driven generator, 5 kVA, IP 23
DY-HG5S-E230SE23-21-VF
DY-HG5S-E230SE23-21-VF
The Dynaset HG5 is a compact hydraulically operated generator with a rated output of 5 kVA, ideal for mobile use on construction sites, service vehicles or municipal machinery.
Equipped with two 230 V sockets (21.7 A), it provides reliable power for power tools and small appliances. It is operated via a hydraulic motor with overflow valve and bypass at 23-35 l/min hydraulic flow and up to 210 bar pressure.
Thanks to frequency control (FLC) and robust capacitor control, the HG5 offers a stable basic supply. The IP23 protection class allows it to be used in protected outdoor areas.
You can find more information on the area of application here: Attachments for construction, agricultural and municipal machinery.
Further models under Dynaset power generators.
Hydraulics: 23-35 l/min at max. 210 barHydraulic motor with overflow valve and bypassGenerator:- Output 5 kVA- 230 volts- 21,7 A - 2 sockets Voltage regulation: CapacitorFrequency control: FLCProtection class IP23
Discount
%
DY-HG6,6W-E400ST54-34-VF
HG6,6 - Hydraulically driven generator, IP 54
DY-HG6,6W-E400ST54-34-VF
DY-HG6,6W-E400ST54-34-VF
The HG6.6 from Dynaset is a robust and efficient generator for hydraulic drives - ideal for professional use on mobile machinery and in the field. With an output of 6.6 kVA, two 230 V sockets (14.2 A) and a 400 V connection (9.5 A), it can be used flexibly for a wide range of consumers on the construction site or in municipal operations.
It is operated via a hydraulic system with 37-51 l/min at max. 210 bar. The integrated hydraulic motor with overflow valve and bypass ensures safe and long-lasting use. The combination of AVR voltage regulation and FLC frequency control ensures constant power quality - even with changing loads.
With its IP54 protection class, the generator is protected against dust and splash water, making it ideal for use in demanding environmental conditions. On request, the model is also available with a cable outlet instead of sockets.
Further generator sizes can be found in the Dynaset power generator overview. Suitable for applications in the field of attachments for construction, agricultural and municipal machinery.
For connection to a hydraulic systemHydraulics: 37-51 l/min at max. 210 bar Hydraulic motor with overflow valve and bypassGenerator:- output 6.6 kVA-230 Volt / 14.2 A / 2 sockets -400 Volt / 9.5 A / 1 socketVoltage regulation: AVRFrequency control: FLCProtection class IP54Available on request with cable outlet without sockets.
Discount
%
DY-HG6,5E-E400ST23-34-VF
HG6.5 - Hydraulically driven generator, 6.5 kVA, IP 23
DY-HG6,5E-E400ST23-34-VF
DY-HG6,5E-E400ST23-34-VF
The Dynaset HG6.5 offers a reliable power supply with 6.5 kVA output for mobile applications in construction, agriculture and municipal technology.
With two 230 V sockets (14.2 A) and a 400 V output (9.4 A), the generator is ideal for operating various consumers in parallel. The integrated hydraulic motor with overflow valve and bypass operates at 37-55 l/min and up to 210 bar.
The AVR voltage regulation and FLC frequency control ensure stable and consistent power quality. With protection class IP23, the HG6.5 can also be used in protected outdoor areas.
Possible applications in the field of attachments for construction, agricultural and municipal machinery.
Further variants under Dynaset power generators.
Hydraulics: 37-55 l/min at max. 210 barHydraulic motor with overflow valve and bypassGenerator:- Output 6.5 kVA- 230 Volt / 14.2 A / 2 sockets- 400 Volt / 9.4 A / 1 socketVoltage regulation: AVRFrequency control: FLCProtection class IP23
Generators, solenoids and welding equipment: KW Hydraulik offers first-class solutions
KW Hydraulik offers a wide range of generators for various applications and requirements. Our standard generators are available in protection classes IP23 and IP54and ensure safe use in different environments. For special requirements, we also offer DC generators, variable speed generators and generators with integrated welding equipment. We also offer generators for ground power supply at airports.
Standard generators protection class IP23
Our standard IP23 generators are an excellent choice when it comes to reliable power supply. With proven technology and first-class design, they offer the power required for a wide range of applications.
Standard generators protection class IP54
The standard IP54 generators are ideal for environments where additional protection is required and also offer outstanding performance.
DC generators IP23
Our IP23 rated DC generators are specifically designed for applications that require a stable DC power supply. They provide a reliable power source and are versatile in use.
Generators for variable speed
DYNASET variable speed generators offer flexibility and control over the energy generated. They adapt to the changing requirements of your applications and offer optimum efficiency.
Generators with integrated welding unit
Our generators with integrated welding unit are the perfect solution for applications that require both power supply and welding functions. They offer high performance and efficiency in a compact package.
Generators for ground power supply (airport)
The DYNASET generators for ground power supply are tailored to the special requirements of airports. They provide reliable ground power for aircraft tractors, pushback vehicles, airport vehicles and service vehicles.
Solenoids with integrated hydraulic generator
Our range of solenoids includes a variety of products, including solenoids with integrated hydraulic generators, magnetic plates and magnetic generators for mounting on the solenoid or machine. Our products are characterised by their robustness and durability and offer you an uninterrupted power supply and maximum efficiency.
Magnetic plates
Our magnetic plates with electrical connection offer a powerful solution for lifting and holding heavy loads.
Magnet generators for mounting on the magnet
The perfect addition to your equipment, providing a reliable power source directly at the work site, it is important that the magnets are connected to the hydraulic circuit of your machine.
Magnet generators for mounting on the machine
Our magnet generators for mounting on the machine are the perfect addition to your equipment. This placement reduces the usable lifting force of an excavator.
Complete generator sets for commercial vehicles
For commercial vehicles, we offer complete generator sets that ensure the power supply on the road. These sets are robust, durable and perfectly matched to the requirements of your vehicles.
Advantages of KW Hydraulik products
High-quality products: KW Hydraulik uses only high-quality materials and components to ensure a long service life and reliable performance.
Wide product range: KW Hydraulik offers a wide range of products to fulfil the requirements of every customer.
Personalised advice: KW Hydraulik's experienced team is at your disposal to help you choose the right products.
Fast delivery: KW Hydraulik offers fast delivery times and reliable customer service.