Cable cutters and wire rope cutters

These battery-powered hydraulic cable shears AS32S-M18V from KW Hydraulik have been developed for cutting copper and aluminium cables - cleanly, quickly and powerfully. With an opening width of 32 mm and a cutting force of 15 kN, the tool is ideal for use in energy and installation technology.The rotating cutting head in open scissor design enables work to be carried out even in hard-to-reach areas. An integrated LED light ensures optimum visibility in the work area - even in poor lighting conditions.The cable shears are powered by a powerful 18V lithium-ion battery from MAKITA. The robust, impact-resistant plastic housing protects the technology in tough everyday use on the construction site, while the sturdy transport case ensures safe and convenient transportation. Whether in network construction, maintenance or on the construction site - these battery-powered hydraulic cable shears are the ideal companion for professionals who value performance and mobility.Rotating cutting head, open shears18 volt lithium-ion battery from MAKITACutting force 15 kNIntegrated LED light to illuminate the work areaRobust plastic housing, impact-resistant Very sturdy transport case

These ES50M-ME18V battery-powered hydraulic cable shears from KW Hydraulik have been developed for cutting copper and aluminium cables - cleanly, quickly and powerfully. With an opening width of 50 mm and a cutting force of 50 kN, the tool is ideal for use in energy and installation technology.The rotating cutting head in open scissor design enables work to be carried out even in hard-to-reach areas. An integrated LED light ensures optimum visibility in the work area - even in poor lighting conditions.The cable shears are powered by a powerful 18 V lithium-ion battery. The robust, impact-resistant plastic housing protects the technology in tough everyday construction site conditions, while the sturdy transport case ensures safe and convenient transport. Whether in network construction, maintenance or on the construction site - these battery-powered hydraulic cable shears are the ideal companion for professionals who value performance and mobility.Rotating cutting head, open shears18 volt lithium-ion batteryCutting force 50 kNIntegrated LED light to illuminate the work areaRobust plastic housing, impact-resistant Very sturdy transport caseAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

This battery-powered hydraulic wire rope cutter from KW Hydraulik has been specially developed for the clean and powerful cutting of flexible wire ropes up to Ø 32 mm. With an impressive cutting force of 176 kN and a guillotine-style cutting head, it effortlessly handles even high-tensile wires up to R = 1700 N/mm². The rotating cutting head ensures maximum flexibility when working - ideal for tight or awkward spaces.The two-stage hydraulic system enables a fast feed for starting the wire and thus noticeably reduces working time. The tool is powered by an 18V lithium-ion battery from MAKITA, which ensures long runtimes and cordless working. The impact-resistant plastic housing reliably protects the inner workings in tough everyday working conditions.Product features:Rotatable cutting head, guillotine18 volt lithium-ion battery from MAKITA Cutting force 176 kN, cutting blade sharpening for flexible wire ropesFor wires up to R=1700 N/mm²Very robust plastic housing, impact-resistant Two-stage hydraulics enable fast feed for starting the cableSturdy transport caseTechnical dataDiameter: 32 mmCutting force: 176 kN6x7, 6x12 up to Ø 32 mm6x19 FE up to Ø 28 mm 7x19 SE up to Ø 24 mmWeight: 11 kg

The BCE025G from STANLEY-DUBUIS is a powerful cordless hydraulic cable cutter, specially developed for the safe and clean cutting of aluminium-steel ropes (ACSR) up to Ø 25 mm. With a cutting force of 55 kN and a rotating guillotine cutting head, it guarantees precise cuts - even in tight spaces.Additional visibility is provided by an integrated LED light that illuminates the work area in a targeted manner. The tool is powered by an 18V lithium-ion battery from DEWALT, which offers reliable performance on the construction site.The impact-resistant plastic housing reliably protects the tool from damage, while the sturdy transport case ensures safe and convenient transport - ideal for daily use in network construction, maintenance or wiring work.If you are looking for alternative versions, the BCL025G is a similar battery-powered alternative with the same cutting performance or the HS25G is a hand-hydraulic model for manual use without a battery. The BCE025G cable shears stand for precise cuts, high-quality workmanship and professional performance when every detail counts.Rotating cutting head, guillotine18 volt lithium-ion battery from DEWALTCutting force 55 kNIntegrated LED light to illuminate the work areaVery robust plastic housing, impact-resistantVery sturdy transport case

The BCL025G from STANLEY-DUBUIS is a compact cordless hydraulic cable cutter specially designed for cutting aluminium-steel ropes (ACSR) up to Ø 25 mm. With a cutting force of 55 kN and a rotating guillotine cutting head, it enables clean cuts even in confined working areas.The integrated LED light ensures optimum visibility at the work site - a clear advantage in poor lighting conditions. The tool is powered by a powerful 18 V lithium-ion battery from DEWALT, which ensures reliable runtimes in mobile use. The impact-resistant plastic housing reliably protects the inner workings from external influences. The sturdy transport case supplied provides additional protection and facilitates safe transport to the construction site.As alternatives, STANLEY-DUBUIS offers the BCE025G, a similar battery-powered model with the same cutting range, and the HS25G, a hand-held hydraulic solution for users without battery power. The BCL025G is the perfect choice for professionals in network construction and energy supply who want to combine reliability, mobility and cutting precision in a compact device.Rotating cutting head, guillotine18 volt lithium-ion battery from DEWALTCutting force 55 kNIntegrated LED light to illuminate the work areaVery robust plastic housing, impact-resistantVery sturdy transport case

The BCP040G from STANLEY-DUBUIS is a powerful cordless hydraulic cable cutter developed for the safe cutting of aluminium-steel ropes (ACSR) up to Ø 40 mm.Equipped with a rotating guillotine cutting head and a cutting force of 88 kN, it offers powerful cuts - even with steel-reinforced cables. A special plus is the two-stage hydraulic system, which enables rapid feed when starting up the cable and thus saves time during repeated cuts.The integrated LED light ensures optimum visibility, even in poor lighting conditions. The cutter is powered by an 18V lithium-ion battery from DEWALT, which provides reliable power for mobile use. The impact-resistant plastic housing reliably protects the technology, while the sturdy transport case supplied ensures safe transport. Rotating cutting head, guillotine18 volt lithium-ion battery from DEWALTCutting force up to 55 kN, cutting blade sharpening for steel-reinforced cablesIntegrated LED light to illuminate the work areaVery robust plastic housing, impact-resistantTwo-stage hydraulic system enables fast feed for starting the cableVery sturdy transport caseComparable tools - Which alternative suits your application? BCP045G - Cordless hydraulic cable cutter Ø 45 mm Cutting principle: Guillotine Drive: Battery-powered hydraulic (DEWALT 18V) Max. cutting rangeCutting range: Ø 45 mm Special features: Larger opening width than the BCP040G Ideal for cables with larger diameters Mobile and powerful 🔗 To the product S40G-ACSR - Hydraulic cutting head Ø 40 mm Cutting principle: Guillotine Drive: Stationary - over 700 BAR hydraulic unit Max. Cutting range: Ø 40 mm Special features: Same cutting force as the BCP040G (88 kN) For stationary installation in pressing stations Ideal for series or workbench applications 🔗 To the product HS40G-ACSR - Hand-held hydraulic cable cutter Ø 40 mm Cutting principle: Guillotine Drive: Hand-hydraulic Max. cutting rangeCutting range: Ø 40 mm Special features: Compact and independent of electricity or battery Ideal for mobile applications without charging infrastructure Same high cutting force as BCP040G 🔗 To the product HS45G-ACSR - Hand-held hydraulic cable cutter Ø 45 mm

The BCP045G from STANLEY-DUBUIS is the ideal solution when it comes to powerful and mobile cutting of aluminium-steel ropes (ACSR) - up to a diameter of 45 mm. Equipped with a guillotine cutting mechanism and a cutting force of 88 kN, this cordless cutter also masters robust, steel-reinforced cables reliably and cleanly. The rotating cutting head ensures maximum flexibility - even in difficult spaces. The integrated two-stage hydraulic system enables fast feed to the cable, which noticeably speeds up work processes. An LED light on the head area also ensures optimum visibility in poor lighting conditions. The BCP045G is powered bya powerful 18V lithium-ion battery from DEWALT, making it ideal for mains-independent use in the field, during assembly work or in overhead line construction. The impact-resistant plastic housing protects the technology, while the supplied transport case ensures safe and convenient transport.

The BCP055G from STANLEY-DUBUIS is a powerful cordless hydraulic cable cutter developed for cutting aluminium and copper cables up to a diameter of 55 mm. With a cutting force of 43 kN and a guillotine cutting mechanism, it ensures clean, powerful cuts - even with large-volume cables. The rotating cutting head enables flexible handling, especially when working in confined areas. Thanks to the integrated two-stage hydraulics, the feed to the cable is accelerated, which saves time and makes the work flow more efficient. An LED light on the cutting head ensures optimum illumination of the work area - ideal in poor lighting conditions or when working in distribution cabinets. The BCP055G is powered by a reliable 18V lithium-ion battery from DEWALT, which guarantees cordless and powerful work even in mobile applications. The impact-resistant housing reliably protects the tool, while the sturdy transport case supplied ensures tidiness and safety. Whether in mains construction, in the power supply or on the construction site - the BCP055G impresses with its robustness, mobility and cutting precision.As comparison tools, we offer you the HS55G manual hydraulic cable cutter as well as the S55G hydraulic cutting head from STANLEY-DUBUIS.Rotating cutting head, guillotine18 volt lithium-ion battery from DEWALT Cutting force 43 kNIntegrated LED light to illuminate the work areaVery robust plastic housing, impact-resistant Two-stage hydraulics enable fast feed for starting the cableVery sturdy transport case

The BCP065S from STANLEY-DUBUIS is a powerful cordless hydraulic cable cutter with an open scissor mechanism that has been specially designed for efficient cutting of aluminium and copper cables up to Ø 65 mm. With a cutting force of 130 kN at the piston and 60 kN directly between the cutting edges, the BCP065S can handle even large cables effortlessly and cleanly. The open design of the rotating cutting head makes positioning and cutting easier - especially in tight spaces or with awkwardly shaped cables. The two-stage hydraulic system ensures that the cable is fed quickly and efficiently. An integrated LED light improves visibility of the cutting area - ideal for use in dark environments. The tool is powered by a robust 18V lithium-ion battery from DEWALT, which enables powerful cuts without a mains connection. The impact-resistant plastic housing provides reliable protection against damage, while the very sturdy transport case ensures safety and organisation.The BCP065S is a reliable partner for installers, network fitters and energy suppliers who want to combine power, convenience and mobile flexibility in one cutting tool.Rotating cutting head, open shears18 volt lithium-ion battery from DEWALT Cutting force 130 kN on the piston, 60 kN between the cutting edgesIntegrated LED light to illuminate the work areaVery robust plastic housing, impact-resistant Two-stage hydraulics enable fast feed for starting the cableVery sturdy transport case

The BCP085G from STANLEY-DUBUIS is a reliable and powerful cordless hydraulic cable cutter designed for cutting aluminium and copper cables with medium steel armouring - and with an impressive diameter of up to 85 mm. The rotating guillotine cutting head ensures clean cuts, while a cutting force of 55 kN and a specially sharpened cutting blade cut even steel-armoured cableswith ease.For additional safety, a finger guard has been integrated to prevent jamming during the return stroke. Particularly practical: thanks to the locking lever design, the cutting head can be opened in any position - ideal for quickly releasing jammed blades. The integrated two-stage hydraulics accelerate the feed, while an LED light ensures optimum visibility in the work area. The robust, impact-resistant housing and sturdy transport case make the device ready for use on any construction site. The BCP085G is powered by an 18V lithium-ion battery from DEWALT - cordless, mobile and long-lasting. STANLEY-DUBUISoffers suitable modelsfor alternative requirements: For those who prefer to work manually, reach for the HS85G - the hand-hydraulic counterpart with the same cutting performance. For users who prefer an open shear design, the AS85S is an interesting battery-powered alternative with even greater cutting power. For stationary applications with a hydraulic unit, the S85G cutting head is recommended , which offers even more power reserves at 700 or 850 BAR. Whether for overhead line construction, energy supply or assembly work - the BCP085G combines safety, cutting precision and mobility in one professional tool.Rotatable cutting head, guillotinewith finger guard, fingers cannot get trapped when pulling back18 volt lithium-ion battery from DEWALTCutting force 55 kN, cutting blade sharpening for steel-reinforced cablesIntegrated LED light to illuminate the work areaSpecial latching lever design allows the cutting head to be opened in any position.This enables release when blades are jammed!Very robust plastic housing, impact-resistantTwo-stage hydraulics enable fast feed for starting the cableVery sturdy transport case

The BE-ES105C-M18V from KW Hydraulik 's ECO-LINE is a powerful cordless hydraulic cable cutter for precise and powerful cutting of copper and aluminium cables up to Ø 105 mm. The open cutting head can be rotated and enables flexible working even in tight spaces.Thanks to the piston force of 200 kN and the robust two-stage hydraulics, the cable is quickly approached and cut - for maximum time savings during use. An integrated LED light ensures optimum visibility of the cutting area, even in poor lighting conditions. The shears are powered by an 18 V lithium-ion battery from MAKITA and come in an impact-resistant plastic housing including a very sturdy transport case - ideal for the construction site, mesh construction or workshop.Whether for mains installation, overhead line construction or power distribution - the BE-ES105C-M18V impresses with its power, mobility and easy handling.Rotating cutting head, open shears18 volt lithium-ion battery from MAKITAPiston force 200 kN, for copper and aluminium cablesIntegrated LED light to illuminate the work areaVery robust plastic housing, impact-resistant Two-stage hydraulics enable fast feed for starting the cableVery sturdy transport caseAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

The BE-ES120C-M18V from KW Hydraulik 's ECO-LINE is a powerful cordless hydraulic cable cutter for precise and powerful cutting of copper and aluminium cables up to Ø 120 mm. The open cutting head can be rotated and enables flexible working even in tight spaces.Thanks to the piston force of 200 kN and the robust two-stage hydraulics, the cable is quickly approached and cut - for maximum time savings during use. An integrated LED light ensures optimum visibility of the cutting area, even in poor lighting conditions. The shears are powered by an 18 V lithium-ion battery from MAKITA and come in an impact-resistant plastic housing including a very sturdy transport case - ideal for the construction site, mesh construction or workshop.Whether for mains installation, overhead line construction or power distribution - the BE-ES120C-M18V impresses with its power, mobility and easy handling.Rotating cutting head, open shears18 volt lithium-ion battery from MAKITAPiston force 200 kN, for copper and aluminium cablesIntegrated LED light to illuminate the work areaVery robust plastic housing, impact-resistant Two-stage hydraulics enable fast feed for starting the cableVery sturdy transport caseAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

The BE-ES30MC-M18V from KW Hydraulik 's ECO-LINE is a compact cordless hydraulic cable cutter for precise and powerful cutting of copper and aluminium cables up to Ø 30 mm. The open cutting head can be rotated and enables flexible working even in tight spaces.Thanks to the piston force of 60 kN and the robust hydraulics, the cable is quickly approached and cut. An integrated LED light ensures optimum visibility of the cutting area, even in poor lighting conditions. The shears are powered by an 18 V lithium-ion battery from MAKITA and come in an impact-resistant plastic housing including a very sturdy transport case - ideal for construction sites, netting work or workshops.Whether for mains installation, overhead line construction or power distribution - the BE-ES30MC-M18V impresses with its power, mobility and easy handling.Rotating cutting head, open shears18 volt lithium-ion battery from MAKITAPiston force 60 kN, for copper and aluminium cables and aluminium-steel ropes (ACSR)Integrated LED light to illuminate the work areaVery robust plastic housing, impact-resistant Very sturdy transport caseAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

The BE-ESG105-M18V from KW Hydraulik 's ECO-LINE is a versatile cordless hydraulic cable cutter for reliable cutting of copper and aluminium cables with light steel armouring. With a maximum cutting capacity of Ø 105 mm, the device is ideal for power cable construction. The rotating guillotine cutting head and the cutting force of 120 kN enable precise and powerful cuts - even with light steel-reinforced conductors. A two-stage hydraulic system ensures fast feed, while the integrated LED light provides optimum illumination of the work area. The BE-ESG105-M18V is powered by an 18V lithium-ion battery from MAKITA, while the impact-resistant housing reliably protects the tool in daily use. The sturdy transport case supplied makes the cable cutter mobile and safe to stow away.Comparable tools depending on application requirements:BE-SDG105 - hydraulic cutting headWhether on the construction site or for maintenance work - the BE-ESG105-M18V offers power, precision and flexibility for professional applications.Rotating cutting head, guillotine18 volt lithium-ion battery from MAKITACutting force 120 kNIntegrated LED light to illuminate the work areaVery robust plastic housing, impact-resistant Two-stage hydraulics enable fast feed for starting the cableVery sturdy transport caseAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

The BE-ESG85-M18V from KW Hydraulik 's ECO-LINE is a versatile cordless hydraulic cable cutter for reliable cutting of copper and aluminium cables with light steel armouring. With a maximum cutting capacity of Ø 85 mm, the device is ideal for power cable construction. The rotating guillotine cutting head and the cutting force of 60 kN enable precise and powerful cuts - even with light steel-reinforced conductors. A two-stage hydraulic system ensures fast feed, while the integrated LED light provides optimum illumination of the work area. The BE-ESG85-M18V is powered by an 18V lithium-ion battery from MAKITA, while the impact-resistant housing reliably protects the tool in daily use. The sturdy transport case supplied makes the cable cutter mobile and safe to stow away.Comparable tools depending on application requirements:S85G - Hydraulic cutting headHS85G - Hand-held hydraulic cable cutterBE-SDG85 - Hydraulic cutting headBCP085G - Battery-powered hydraulic cutting head for cables up to Ø 85 mmWhether on the construction site or for maintenance work - the BE-ESG85-M18V offers power, precision and flexibility for professional applications.Rotating cutting head, guillotine18 volt lithium-ion battery from MAKITACutting force 60 kNIntegrated LED light to illuminate the work areaVery robust plastic housing, impact-resistant Two-stage hydraulics enable fast feed for starting the cableVery sturdy transport caseAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

Maximum performanceThe BE-HSG55AC is a robust hand-held hydraulic cable cutter for precise cutting of overhead lines and steel-reinforced aluminium and copper cables up to Ø 55 mm.The BE-HSG55AC is supplied in a sturdy case, perfect for mobile use in the energy supply sector, industry or network construction.Rotatable cutting head, guillotine Suitable for steel-reinforced cables, aluminium-steel cables (ACSR) and CU or AL cablesCutting force 120 kN Two-stage hydraulics enable fast feed for starting the cable Carrying bagService by KW HYDRAULIK GMBHAll-round service in Germany!Repair - Maintenance - Spare parts

Hydraulic cable shears for CU and AL cables up to Ø 120 mmThe BE-SDK120 is a powerful hydraulic cable cutter, ideal for cutting copper and aluminium cables with light steel armouring.With a cutting force of 120 kN at 700 bar and special blade grinding, it offers reliable cutting performance.For cutting CU and aluminium cables with light steel armouring,Cutting force 120 kN at 700 BARService by KW HydraulikAll-round service in Germany!Repair - Maintenance - Spare parts

Versatility for up to 15 applicationsThe BPL063 cordless hydraulic MULTITOOL from STANLEY-DUBUIS is a powerful, versatile tool with 62 kN pressing force that is suitable for up to 15 different applications. Thanks to the robust quick-release coupling, the various tool inserts can be changed quickly and safely, while the swivelling holder offers maximum flexibility.The impact-resistant housing with two-component handle ensures comfortable handling, while the USB interface for data readout and the automatic pressure cut-off ensure a high level of process reliability. The powerful 18V / 5 Ah lithium-ion battery from DEWALT is included as standard; batteries up to 18V / 12 Ah are available as an option.The BPL063 is supplied in an extremely hard-wearing case, including battery and charger, but without inserts - these are available for various applications such as pressing, cutting, punching, bolt and nut cutting or straightening contact wires.Rod shape, for accessing hard-to-reach areas. (switch cabinet)Robust and durable quick coupling for holding the various tool inserts. DEWALT18 volt / 5 Ah lithium-ion battery and XR series charger supplied.Batteries up to 18 Volt / 12 Ah are available as an option.The inserts can be rotated in the holder.Impact-resistant housing with two-component handle for perfect handlingSupplied in an extremely hard-wearing caseAutomatic switch-off after reaching the maximum pressure (pressure relief valve)USB interface for data readoutForce: 62 kNStroke: 38 mmDimensions: 350x85x120 mmWeight: 2.8 kgScope of delivery:Battery-powered hydraulic combi tool,incl. one battery, charger and case,without interchangeable tool insertsAvailable tool inserts:XPM-062 compact, closed crimping head with hinged lock, for crimping in tight spaces.For "60-CK" series press inserts, compatible with "KLAUKE Series 22" and "DUBUIS D62" insertsCrimping force 62 kN, enables crimping of:max. 300 mm² copper cable lugs to DIN 46235max. 300 mm² aluminium XCM-050 - open cutting head Ø50mm for CU and AL cablesXGM-025 - closed cutting head Ø25mm for aluminium-steel cables (ACSR) - overhead lineXHM-062 - Punch for perforators with 3/4 "UNF mounting thread,compatible with sheet metal punches of the brands GREENLEE, ALFRA, ...max. Ø96mm in sheet steel 2mmXCMDIN - Profile rail cutting insert for DIN mounting railsTS15x35mm, TS7.5x35mm, TS5x15mmG-railCU 3x10mm, CU 3x25mmSlotted hole insert M6XCMSTRU - Profile rail cutting insert for STRUT support rails41x41mm and 41x21mmXCM008 - Bolt cutter up to Ø8mmCutting head available in three different versions: curved, straight, flush cuttingIdeal for cutting fasteners such as lag screws, screws, L-shaped hooks and nails. XPM061 - compact, open crimping head for crimping in tight spaces. For press inserts series "60-D" DIN 48083-6M, compatible with inserts from the "KLAUKE series 18", "DUBUIS D61" series Crimping force 62 kN, enables crimping of: max. 185 mm² copper cable lugs to DIN 46235 max. 185 mm² aluminium XPM060F - closed four-pin crimping head, does not require interchangeable crimping inserts.Crimping force: 62 kNmax. 400 mm² copper commercially available standard cable lugsmax. 300 mm² aluminium commercially available standard cable lugsXPM130D - compact, closed crimping head with hinged closure.For "130-C" series crimping inserts, compatible with "KLAUKE Series 13" and "DUBUIS C130" inserts Crimping force 130 kN, enables crimping of: max. 300 mm² copper cable lugs to DIN 46235 max. 300 mm² aluminium XDM041 - Contact wire straightener for contact wires from 107-150 mm²Eliminates kinks in the contact wireForce: 40 kNXCMNUT - Nut splitter M8 to M12Force: 43 kNXGMTRC - Threaded rod cutter M6 to M12Force: 60 kNXGMCAT - Contact wire cutter for 102, 120 and 150 mm²Stroke: 27 mmForce: 60 kNXCMTRAY - Mesh cable duct cutter up to Ø6mmfor cutting the grid bars

Versatility for up to 15 applicationsThe BPP063 cordless hydraulic MULTITOOL from STANLEY-DUBUIS is a powerful, versatile tool with 62 kN pressing force and two-stage hydraulics with fast feed, which is suitable for up to 15 different applications. Thanks to the robust quick-release coupling, the various tool inserts can be changed quickly and safely, while the swivelling holder offers maximum flexibility.The impact-resistant housing with two-component handle ensures comfortable handling, while the USB interface for data readout and the automatic pressure cut-off ensure a high level of process reliability. The powerful 18V / 5 Ah lithium-ion battery from DEWALT is included as standard; batteries up to 18V / 12 Ah are available as an option.The BPP063 is supplied in an extremely hard-wearing case, including battery and charger, but without inserts - these are available for various applications such as pressing, cutting, punching, bolt and nut cutting or straightening contact wires.Pistol-shaped, heavy-duty design with fast feed (two-stage hydraulics)Robust and durable quick coupling for holding the various tool inserts. DEWALT18 volt / 5 Ah lithium-ion battery and XR series charger supplied.Batteries up to 18 Volt / 12 Ah are available as an option.The inserts can be rotated in the holder.Impact-resistant housing with two-component handle for perfect handlingSupplied in an extremely hard-wearing caseAutomatic switch-off after reaching the maximum pressure (pressure relief valve)USB interface for data readoutForce: 62 kNStroke: 38 mmDimensions: 295x86x335 mmWeight: 3.95 kgScope of delivery:Battery-powered hydraulic combi tool,incl. one battery, charger and case,without interchangeable tool insertsAvailable tool inserts:XPM-062 compact, closed press head with hinged lock for pressing even in confined areas.For "60-CK" series press inserts, compatible with "KLAUKE Series 22", "DUBUIS D62" series insertsCrimping force 62 kN, enables crimping of:max. 300 mm² copper cable lugs to DIN 46235max. 300 mm² aluminium XCM-050 - open cutting head Ø50mm for CU and AL cablesXGM-025 - closed cutting head Ø25mm for aluminium-steel cables (ACSR) - overhead lineXHM-062 - Punch for perforators with 3/4 "UNF mounting thread,compatible with sheet metal punches of the brands GREENLEE, ALFRA, ...max. Ø96mm in sheet steel 2mmXCMDIN - Profile rail cutting insert for DIN mounting railsTS15x35mm, TS7.5x35mm, TS5x15mmG-railCU 3x10mm, CU 3x25mmSlotted hole insert M6XCMSTRU - Profile rail cutting insert for STRUT support rails41x41mm and 41x21mmXCM008 - Bolt cutter up to Ø8mmCutting head available in three different versions: curved, straight, flush cuttingIdeal for cutting fasteners such as lag screws, screws, L-shaped hooks and nails. XPM061 - compact, open crimping head for crimping in tight spaces. For press inserts series "60-D" DIN 48083-6M, compatible with inserts from the "KLAUKE series 18", "DUBUIS D61" series Crimping force 62 kN, enables crimping of: max. 185 mm² copper cable lugs to DIN 46235 max. 185 mm² aluminium XPM060F - closed four-pin crimping head, does not require interchangeable crimping inserts.Crimping force: 62 kNmax. 400 mm² copper commercially available standard cable lugsmax. 300 mm² aluminium commercially available standard cable lugsXPM130D - compact, closed crimping head with hinged closure.For "130-C" series crimping inserts, compatible with "KLAUKE Series 13" and "DUBUIS C130" inserts Crimping force 130 kN, enables crimping of: max. 300 mm² copper cable lugs to DIN 46235 max. 300 mm² aluminium XDM041 - Contact wire straightener for contact wires from 107-150 mm²Eliminates kinks in the contact wireForce: 40 kNXCMNUT - Nut splitter M8 to M12Force: 43 kNXGMTRC - Threaded rod cutter M6 to M12Force: 60 kNXGMCAT - Contact wire cutter for 102, 120 and 150 mm²Stroke: 27 mmForce: 60 kNXCMTRAY - Mesh cable duct cutter up to Ø6mmfor cutting the grid bars

Special set for overhead line constructionThe BPP063-Set1 cordless hydraulic MULTITOOL from STANLEY-DUBUIS has been specially developed for overhead line construction and combines a powerful 62 kN pressing force with a wide range of applications. Thanks to the two-stage hydraulics with fast feed, it enables fast and precise work processes, while the robust quick-release coupling allows the tool inserts to be changed quickly.This set contains two powerful tool inserts:XPM-062 compact, closed crimping head with flip lock, ideal for confined work areas. Compatible with KLAUKE and DUBUIS inserts, it enables crimping of copper and aluminium cables up to 300 mm².XGM-025 closed cutting head with 25 mm diameter, especially for cutting aluminium-steel cables (ACSR) in overhead line construction. The folding head with precise blade guidance ensures clean cuts with minimum effort.The impact-resistant housing with two-component handle ensures safe handling, while the USB interface enables simple data evaluation. The powerful 18V / 5 Ah lithium-ion battery from DEWALT ensures maximum mobility; batteries up to 18V / 12 Ah are available as an option.The set is supplied in an extremely hard-wearing case, including battery, charger and the two tool inserts - perfect for professional use in power supply and electrical installation. Pistol shape, heavy-duty design with fast feed (two-stage hydraulics) Robust and durable quick-release coupling for holding the various tool inserts. DEWALT18 volt / 5 Ahlithium-ion battery and XR series chargers are included.Batteries up to 18 Volt / 12 Ah are available as an option.The inserts can be rotated in the holder.Impact-resistant housing with two-component handle for perfect handlingXCM025 - Ø25 mm cutting head for ACSR cablesFolding head with precise blade guide, cutting force: 62 kNSupplied in an extremely hard-wearing caseAutomatic switch-off after reaching the maximum pressure (pressure relief valve)USB interface for data readoutForce: 62 kNScope of delivery:Battery-powered hydraulic combi tool, incl. one battery, charger and case, XPM-062 compact, closed crimping head with hinged lock for crimping in tight spaces. For "60-CK" series pressing inserts, compatible with the "KLAUKE Series 22" and "DUBUIS D62" series inserts. Crimping force 62 kN, enables crimping of: max. 300 mm² copper cable lugs to DIN 46235, max. 300 mm² aluminium XGM-025 - closed cutting head Ø25mm for aluminium-steel cables (ACSR) - overhead line

For stranded copper and aluminium cables.Maximum cable diameter: 55 mm CU/AL conductor sector-shaped: 550 mm²CU/AL conductor: 550 mm²CU/AL finely stranded conductor: 550 mm²CU/AL telecommunication data cable: 550 mm² Not suitable for wire ropes, steel wire or steel-reinforced cables! Two-handed operation with ratchet mechanism. Extra strong toothing. Can be released in any position.Made in Germany

Double-acting wire rope cutter for high-strength ropes and steel rodsThe HWRC-D is a robust hydraulic wire rope cutter with a double-acting cylinder for fast forward and reverse travel. Thanks to the open cutting jaw, the material can be easily inserted - ideal for cutting high-strength wire ropes and solid steel rods.The hardened steel blades, stainless steel housing and quick-release couplings ensure durability and easy handling in everyday use.Available cutting ranges: Ø 90 mm, 114 mm.Features a double-acting cylinder that ensures fast and powerful retractionStainless steel construction The cutting head with open jaw allows easy access to the material to be cutSpecially hardened high tensile steel blades and jawsDesigned for cutting high tensile interlocked coil wire rope and solid steel rodsEquipped with quick couplings for easy connection to hydraulic pump and hoses

The KBE-EMS54-M18V is a battery-powered mechanical cable cutter that has been specially developed for cutting fine-stranded copper cables with a diameter of up to 54 mm. Whether in the energy supply sector, municipal utilities, telecommunications companies or their service providers - this cutter always delivers a particularly clean cut thanks to its circular cutting action.With a cutting force of 25 kN and a weight of just 2.6 kg (including battery), it is not only powerful, but also handy and easy to handle. The robust design allows reliable use even under demanding conditions.The safety switch lever ensures controlled and safe working, while the powerful battery enables up to 70 cuts per charge - ideal for daily use on site.Cuts cables up to Ø 54 mm in the field of energy supply companies, municipal utilities and their service providers, telecommunications, etc.Particularly good cutting pattern due to circular cutApprox. 70 cuts with one battery chargeSafe working thanks to the safety switch leverRobust design allows use even under the toughest conditionsCutting diameter: up to 54 mmCutting force: 25 kNWeight: 2.6 kg (incl. battery)Drive: mechanicalScope of delivery: KBE-ESM54-M18V incl. one MAKITA 18V/5Ah Li-Ion battery, charger and transport caseAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

The hand-held hydraulic cable cutter from STANLEY-Infrastructure impresses with a rotating cutting head (guillotine) and automatic pressure limitation. Thanks to the cable cutter being supplied in a sturdy transport case, the device can be stowed away and is ready for use at any time.You can findsuitable cutting heads for the HS25G in our online shop.Rotatable cutting head, guillotineCutting force 55 kNAutomatic pressure limitationVery sturdy transport case