FAQ - Hydraulikpumpen und Aggregate 

The BGH701 hydraulic pump from STANLEY-DUBUISis the ideal solution for mobile hydraulic applications in industry, maintenance and on construction sites. With its powerful 18V electric motor and interchangeable battery, the hydraulic pump operates completely independently and ensures a reliable pressure supply for single-acting tools. The operating pressure range of 200 to 700 bar ensures versatile applications, whilst control is carried out either directly on the hydraulic pump or via the wired handheld remote control. The robust construction and automatic pressure shut-off guarantee safe and efficient use in demanding working environments. Thanks to the swivelling hydraulic connection (CEJN Series 115), the pump can be easily integrated into existing work processes.This battery-powered hydraulic unit operates in any position and, thanks to its light weight and the carrying strap supplied, is ideal for mobile use Pressure cut-off when the maximum pressure is reached Mode: Cutting / Pressing Thermal fuse to protect against overheating Battery charge level indicator Swivel hydraulic connection (CEJN Series 115)Sturdy carrying case available as an optional extra Contents: - BGH-701 cordless hydraulic pump - Hand-held remote control, 2 m -DEWALT 18-volt / 5.0 Ah Li-ion replacement battery -DEWALT charger

Hydraulics: max. 850 barLow pressure: 1.5 L/min @ 0–20 barHigh pressure: 0.3 L/min @ 20–850 barBattery: 36 volts / 6.2 Ah METABOTank: 1 litreDimensions: 440 x 130 x 285 mmWeight: 9.5 kgComprehensive software for Android devices for documenting pressing operations and locating the pump2” colour touchscreen, readable from any angleTemperature cut-out switch (60°C)Battery protection circuit (<20%)Brushless DC motor. High efficiency. Long service life. Good reliability and stability.Lightweight. With a 6.2 Ah battery, the unit weighs less than 10 kg.Wireless remote control (max. 50 m)Comprehensive service in Germany by KW HYDRAULIK GMBHAdvice – Repairs – Maintenance – Spare parts

TheDOAASAPID is the most compact and lightweight hydraulic power unit in the DOA range – specially developed for mobile applications where maximum portability and sufficient power are essential. With a 9 PS petrol engine (Honda) and recoil starter (cable starter), this Micro Power Pack is ready for immediate use.Technical details:9 PS petrol engine (Honda) with pull-startFlow rate: 20 l/minOperating pressure: up to 140 barWith oil tank, air-oil cooling, oil filter and fuel tankFlat-face couplings (P+T) for connecting an implementWeight: 69 kgDimensions: [700 x 500 x 570] mmSturdy stainless steel protective frame with castors and handleOn request, the hydraulic system can be customised to meet specific requirements within the power output of the unit.

TheDOANITRO DIESEL DUAL is a versatile and powerful hydraulic power unit with a 24 PS Kubota diesel engine and electric starter, designed for professional applications in both mobile and stationary use.Technical details:Hydraulic power units with a 24 PS Kubota diesel engine and electric starterFlow rate tailored to customer requirements within the power unit’s capacity, e.g.:Single-circuit operation: max. 50 L/min at 100–210 barDual-circuit operation: 1 x 30 L/min and 1 x 20 L/min at 100–210 barRobust hydraulic system with a 50-litre oil tank and a 30-litre fuel tankAir-oil cooling and integrated oil filterConnection for one piece of equipment via flat-face couplings (P+T)Weight: 210 kgDimensions: [950 × 600 × 650] mm

The EHP-VDS700-230V-DE model is a compact and powerful hydraulic power unit designed to operate double-acting tools. The integrated 1.4 kW electric motor (230 V) operates at 14,000 rpm and delivers a maximum flow rate of 3 l/min at up to 700 bar. Two solenoid valves are fitted to ensure precise control. The hydraulic tank, with a capacity of 2.3 litres, is designed for short to medium-duration applications where compactness and ease of handling are paramount. Thanks to its compact design, measuring 374 x 230 x 351 mm and weighing just 16.9 kg, this unit is ideally suited to mobile applications or confined installation spaces. EDILGRAPPA’sEHP-VDS seriesdelivers high performance in the smallest of spaces – ideal for industry, maintenance and mobile technology.Hydraulic pump with 230-volt electric motor1.4 kW motor (14,000 rpm)Flow rate: 3 L/min, max. 700 BARTwo solenoid valves2.3-litre hydraulic tankDimensions: 374 x 230 x 351 mmWeight: 16.9 kg

The EHP-VDS700-G28-230V-DE hydraulic power unit has been specially designed for operating double-acting tools. The system is driven by a robust 1.5 kW electric motor (230 V, 2800 rpm), which delivers a flow rate of 1.2 l/min at up to 700 bar. Two integrated solenoid valves ensure precise control. The hydraulic tank has a capacity of 2.3 litres, providing sufficient volume for applications with intermittent loads.With compact dimensions of 362 × 229 × 441 mm and a weight of 27 kg, the unit is ideally suited for stationary or mobile use, for example in maintenance, tool shops or in specialised industrial applications.Reliable, durable and designed for maximum pressure output – theEDILGRAPPAEHP-VDS700-G28-230V-DE is a unit designed to meet the highest demands in confined spaces.Hydraulic pump with 230-volt electric motor1.5 kW motor (2800 rpm)Flow rate: 1.2 L/min, max. 700 barTwo solenoid valves2.3-litre hydraulic tankDimensions: 362 x 229 x 441 mmWeight: 27 kg

The EHP-VDS700-G28-230V-DM hydraulic power unit is a particularly robust and compact solution for use with double-acting tools. Fitted with a 1.5 kW electric motor (2800 rpm) operating at 230 volts, this power unit delivers a maximum flow rate of 1.2 l/min at up to 700 bar.Unlikevariants with solenoid valves,this model is fittedwith a mechanical manual valve – ideal for users who prefer manual operation and maximum control. Its compact design and weight of just 27 kg make the unit easy to transport and versatile in use, even in confined spaces.With a hydraulic tank capacity of 2.3 litres and compact dimensions of 362 × 229 × 441 mm, this unit is ideally suited for flexible use on construction sites, in the workshop or for mobile service operations.Hydraulic pump with 230-volt electric motor1.5 kW motor (2800 rpm)Flow rate: 1.2 L/min, max. 700 BARManual mechanical valve2.3-litre hydraulic tankDimensions: 362 x 229 x 441 mmWeight: 27 kg

The GHP-CB700-DM-C fromEDILGRAPPAis a high-performance hydraulic power unit with a petrol engine, designed for mobile use with double-acting hydraulic systems. The reliable 5.5 PS petrol engine drives a high-quality pump that operates both in the low-pressure range at 6 l/min at 100 bar and inthe high-pressure range at 1.6 l/min at up to 700 bar.A manual valve fitted to the pump allows precise control of the three basic functions: extension, holding under pressure and retraction.The integrated oil cooler ensures consistently reliable performance – even under continuous load. With a 23-litre hydraulic tank and compact dimensions, the unit is ideal for use in locations without a mains power supply or as an emergency backup on construction sites. Its robust construction makes the unit a reliable companion when working with hydraulic cylinders, spreaders or other double-acting tools. Ideal for users who require flexibility, power and controllability in a compact system.Hydraulic power unit with 5.5 PS petrol engineHigh flow rateLow pressure: 6 L/min at max. 100 BARHigh pressure: 1.6 L/min at max. 700 BARManual valvesWith oil coolerFor applications with a separate control valve or control unit on the pumpFunction: Extension – hold position under pressure – retraction 23-litre hydraulic tank

The GHP-VDS700-DM fromEDILGRAPPAis an extremely compact hydraulic power unit with a HONDA petrol engine, specially designed for operating double-acting tools under variable pressure conditions. With a powerful 1.35 PS engine running at 7000 rpm, it delivers a flow rate of 2 l/min in the low-pressure range up to 100 bar and 1 l/min in the high-pressure range up to a maximum of 700 bar. Operation is via an integrated manual valve, which allows typical functions such as extension, holding under pressure and retraction to be controlled safely. The unit is fitted with a 2.3-litre hydraulic tank and, with compact dimensions of 342 × 282 × 464 mm, weighs just 16.7 kg – ideal for mobile use in confined spaces. Perfectly suited to users who require low weight, a self-sufficient power supply and precise control – for example, in mobile maintenance, rescue operations or when working off-site without a mains connection.Hydraulic pump with internal combustion engine (petrol)1.35 PS HONDA engine (7,000 rpm)Flow rate Low pressure: 2 L/min up to 100 BARHigh pressure: 1 L/min at 100 BAR up to max. 700 BARManual valve2.3-litre hydraulic tankDimensions: 342 x 282 x 464 mmWeight: 16.7 kg

The GHP-VDS700-SM fromEDILGRAPPAis an extremely compact hydraulic power unit with a HONDA petrol engine, specially designed for operating single-acting tools. With a powerful 1.35 PS engine running at 7000 rpm, it delivers a flow rate of 2 l/min in the low-pressure range up to 100 bar and 1 l/min in the high-pressure range up to a maximum of 700 bar. Operation is via an integrated manual valve, which allows typical functions such as extension and retraction to be controlled safely. The unit is fitted with a 2.3-litre hydraulic tank and, with compact dimensions of 342 × 282 × 464 mm, weighs just 17 kg – ideal for mobile use in confined spaces. Perfectly suited to users who require low weight, a self-sufficient power supply and precise control – for example, in mobile maintenance or when working off-site without a mains connection.Hydraulic pump with internal combustion engine (petrol)1.35 PS HONDA engine (7,000 rpm)Flow rate Low pressure: 2 L/min up to 100 BARHigh pressure: 1 L/min at 100 BAR up to a maximum of 700 BARManual valve2.3-litre hydraulic tankDimensions: 342 x 282 x 464 mmWeight: 17 kg

The KBE-AHP70 hydraulic pump from our PROFI-LINErange is the ideal solution for mobile hydraulic applications in industry, maintenance and on construction sites. Equipped with a powerful 18V electric motor and two interchangeable batteries, the hydraulic pump operates completely independently and ensures a reliable pressure supply for single-acting tools. The operating pressure range of 200 to 700 bar ensures a wide range of applications, whilst control is via a wireless remote control or a wired remote control. The robust design and automatic pressure shut-off guarantee safe and efficient use in demanding working environments. Thanks to the swivelling hydraulic connection (CEJN Series 115), the pump can be easily integrated into existing work processes.This battery-powered hydraulic unit is ideal for mobile use thanks to its light weight and the carrying strap supplied Pressure cut-off when maximum pressure is reached Thermal fuse to protect against overheating Battery charge level indicatorSwivel hydraulic connector (CEJN Series 115)Contents:- BE-AHP700 cordless hydraulic pump - Hand-held remote control and wireless remote control - MAKITA 18V / 5Ah replacement battery, 2 pieces- MAKITA chargerAs a manufacturer of hydraulic power units and tools, and a partner to numerous international brands of hydraulic tools, KW HYDRAULIK GmbH possesses the expertise and capacity to service and repair hydraulic equipment.Comprehensive service in Germany by KW HYDRAULIK GmbHAdvice – Repairs – Maintenance – Spare parts

Hydraulics: max. 700 barLow pressure: ... L/min @ 0–20 barHigh pressure: ... L/min @ 20–700 barTank: 2.1 litresDimensions: 370 × 223 × 453 mmWeight: 24 kgAutomatic function. The process is initiated with a single click and ends automatically.Crimping or cutting function can be selected as an option.The 4.2-inch LCD screen displays the various operating statuses of the different units.The button for tilting the screen is designed to allow the screen to be operated.Built-in data storage system, capable of storing 200,000 crimping records.Built-in pressure sensor to monitor the crimping process.Built-in Bluetooth module capable of transmitting data via Bluetooth.Built-in GPS tracking module, allowing you to locate the device at any time.Built-in temperature sensing system, capable of measuring the ambient temperature and displaying it on the LCD screen.Built-in 4G module, allowing crimping data to be transmitted in real time.The LCD screen can be used to set the pressure (20/40/70 MPa).Wired remote controlComprehensive service in Germany by KW HYDRAULIK GMBHConsultancy – Repairs – Maintenance – Spare parts