This unique combination tool can bend and straighten structural steel up to D=25mm.TheKPE-ABR25-M18VT cordless hydraulic bending and straightening tool is the ideal solution for bending and straightening reinforcing bars in reinforced concrete construction with a diameter of Ø 25 mm. Equipped with an integrated battery-powered hydraulic pump (18 V), the tool is immediately ready for use - without the need for a power connection.This tool combines high power reserves with a compact design and is ideal for reinforcement work, renovation and corrections on the construction site.Available from KW Hydraulik - your specialist for professional cutting, bending and straightening technology in concrete and steel construction.Product facts:Cutting capacity: Ø 4-25 mmBending capacity: Ø 4-25 mmBending angle: 0-130°Dimensions: 590x120x215 mmWeight: 13.5 kgDelivery: ABR25-M18VT bending tool, straightening attachment, incl. 18V/5Ah MAKITA battery and chargerAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare partsWe are happy to carry out test bends for you.

The BGH700 hydraulic pump from STANLEY-DUBUIS is the ideal solution for mobile hydraulic applications in industry, maintenance and on construction sites. With its powerful 18V electric motor with exchangeable battery, the hydraulic pump works completely independently and guarantees a reliable pressure supply for single-acting tools. The operating pressure of 200 to 700 bar ensures a wide range of possible applications, while control is carried out directly on the hydraulic pump or via the hand-held cable remote control. The robust design and automatic pressure cut-off guarantee safe and efficient use in demanding working environments. Thanks to the rotatable hydraulic connection (CEJN Series 15), the pump can be easily integrated into existing work processes.This battery-powered hydraulic unit works in any position and is ideal for mobile use thanks to its light weight and the supplied carrying strap Pressure switch-off when maximum pressure is reached Mode: cutting / pressingThermal fuse to protect against overheating Charge status controlRotatable hydraulic connection (CEJN 115 series)Sturdy transport case optionally availableScope of delivery:- BGH-700 battery-powered hydraulic pump - Hand-held remote control 2 m - DEWALT exchangeable battery 18 Volt / 5.0 Ah Li-Ion - DEWALT charger

Hydraulics: max. 850 barLow pressure: 1.5 L/min @ 0-20 barHigh pressure: 0.3 L/min @ 20-850 barBattery: 36 Volt / 6.2 Ah METABOTank: 1 litreDimensions: 440x130x285 mmWeight: 9.5 kgComprehensive software for Android devices for documenting pressing processes and localising the pump2" colour touch screen, readable from any directionTemperature protection switch (60°C)Battery protection circuit (<20%)Brushless DC motor High efficiency. Long service life. Good reliability and stability.Low weight. With a 6.2 Ah battery, the unit weighs less than 10 kg.Radio remote control (max. 50 m)All-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

The DOA ASAPID is the most compact and lightest hydraulic power pack in the DOA range - specially developed for mobile applications where maximum transportability and sufficient power are required. With a 9 hp petrol engine (Honda) and recoil start (pull starter), this Micro Power Pack is ready for immediate use.Technical details:9 hp petrol engine (Honda) with pull-wire starterDelivery rate: 20 l/minOperating pressure: up to 140 barWith oil tank, air/oil cooling system, oil filter and fuel tankFlat-face couplings (P+T) for connecting an applianceWeight: 69 kgDimensions: [700x500x570] mmSturdy stainless steel protective frame with castors and handleOn request, the hydraulics can be customised to suit the power unit's performance.

The DOA NITRO DIESEL DUAL is a versatile and powerful hydraulic power pack with a 24 hp Kubota diesel engine and electric starter, developed for professional applications in mobile and stationary use.Technical details:Hydraulic power packs with 24 hp Kubota diesel engine with electric starterDelivery capacity according to customer requirements within the scope of the power unit's capacity, e.g:Single-circuit operation: max. 50 l/min. at 100-210 barDual-circuit operation: 1x30 L/min and 1x20 L/min at 100-210 barRobust hydraulic system with 50 litre oil tank and 30 litre fuel tankAir-oil cooling and integrated oil filterConnection for one device via flat-face couplings (P+T)Weight: 210 kgDimensions: [950x600x650] mm

The EHP-VDS700-230V-DE model is a compact and powerful hydraulic power pack for operating double-acting tools. The integrated 1.4 kW electric motor (230 V) operates at 14,000 rpm and delivers a maximum flow rate of 3 l/min at up to 700 bar. Two solenoid valves are installed for precise control. The hydraulic tank with a capacity of 2.3 litres is designed for short to medium applications where compactness and easy handling are paramount. Thanks to its compact design with dimensions of 374 x 230 x 351 mm and a weight of just 16.9 kg, this power pack is ideal for mobile applications or confined installation situations. The EHP-VDS series from EDILGRAPPA stands for high performance in the smallest of spaces - ideal for industry, maintenance and mobile technology.Hydraulic pump with 230 volt electric motor1.4 kW motor (14000 rpm)Delivery rate: 3 l/min max. 700 BARTwo solenoid valves2.3 litre hydraulic tankDimensions: 374 x 230 x 351 mmWeight: 16.9 kg

The EHP-VDS700-G28-230V-DM hydraulic power pack is a particularly robust and compact solution for use with double-acting tools. Equipped with a 1.5 kW electric motor (2800 rpm) at 230 volts, this power pack offers a maximum flow rate of 1.2 l/min at up to 700 bar.In contrast to variants with solenoid valves, this model is equipped with a mechanical manual valve - ideal for users who rely on manual control and maximum control. The compact design and weight of just 27 kg make the unit easy to transport and versatile, even in confined spaces.With a hydraulic tank capacity of 2.3 litres and compact dimensions of 362 x 229 x 441 mm, this power pack is ideal for flexible use on construction sites, in the workshop or in mobile service applications.Hydraulic pump with 230 volt electric motor1.5 kW motor (2800 rpm)Delivery rate: 1.2 l/min max. 700 BARMechanical manual valve2.3 litre hydraulic tankDimensions: 362 x 229 x 441 mmWeight: 27 kg

The EHP-VDS700-G28-230V-DE hydraulic power pack has been specially designed for operating double-acting tools. The system is driven by a robust 1.5 kW electric motor (230 V, 2800 rpm), which generates a flow rate of 1.2 l/min at up to 700 bar. Two integrated solenoid valves ensure precise control. The hydraulic tank holds 2.3 litres and therefore offers sufficient volume for applications with intermittent loads.With compact dimensions of 362 x 229 x 441 mm and a weight of 27 kg, the unit is ideal for stationary or mobile use, for example in maintenance, tool operation or special industrial solutions.Reliable, durable and designed for maximum pressure performance - the EDILGRAPPA EHP-VDS700-G28-230V-DE is a power pack for the highest demands in confined spaces.Hydraulic pump with 230 volt electric motor1.5 kW motor (2800 rpm)Delivery rate: 1.2 l/min max. 700 BARTwo solenoid valves2.3 litre hydraulic tankDimensions: 362 x 229 x 441 mmWeight: 27 kg

The ESK22-8-40-230V is a powerful electro-hydraulic hole punch for working with flat and sectional steel. It is ideal for applications in steel construction, plant engineering and industrial use. With a jaw depth of 40 mm and the ability to punch round holes of Ø 10-22 mm and slotted holes in material up to 8 mm thick (DIN S275), it impresses with its speed and accuracy.The device is powered by a 1200 W electric motor (230 V, 50/60 Hz). The robust design with a weight of 13.5 kg ensures high stability.At a glance: Mould depth: 40 mm Punching capacity up to DIN S275Round hole Ø 10 - 22 mmMaterial thickness 3-8 mm Motor: 1200 watts, 230 V, 50/60 Hz Weight: 13.5 kg Scope of delivery: Electro-hydraulic hole punch, 230 VAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

The ESK36-12-60-230V is a powerful electro-hydraulic hole punch for working with flat and sectional steel. It is ideal for applications in steel construction, plant engineering and industrial use. With a jaw depth of 60 mm and the ability to punch round holes of Ø 10-36 mm and slotted holes in material up to 12 mm thick (DIN S275), it impresses with its speed and accuracy.The device is powered by a 1500 W electric motor (230 V, 50/60 Hz). The robust design with a weight of 25.7 kg ensures high stability.At a glance: Jaw depth: 60 mm Punching capacity up to DIN S275Round hole Ø 10 - 32 mmMaterial thickness 3-12 mm Motor: 1500 watts, 230 V, 50/60 Hz Weight: 25.7 kg Scope of delivery: Electro-hydraulic hole punch, 230 VAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

The GHP-CB700-DM-C from EDILGRAPPA is a powerful hydraulic power pack with a petrol engine, designed for mobile use with double-acting hydraulic systems. The reliable 5.5 hp petrol engine drives a high-quality pump that operates both in the low-pressure range with 6 l/min at 100 bar and in thehigh-pressure range with 1.6 l/min at up to 700 bar.A manual valve installed on the pump allows precise control of the three basic functions: Extend, hold under pressure and retract.The integrated oil cooler ensures consistently reliable performance - even under continuous load. With a 23 litre hydraulic tank and compact dimensions, the power pack is ideal for sites without a power supply or as an emergency backup on construction sites. The robust design makes the unit a reliable companion when working with hydraulic cylinders, spreaders or other double-acting tools. Ideal for users who need flexibility, power and controllability in a compact system.Hydraulic unit with 5.5 hp petrol engineHigh delivery rateLow pressure: 6 l/min. at max. 100 BARHigh pressure: 1.6 l/min. at max. 700 BARManual valvesWith oil coolerFor applications with their own control valve or control on the pumpFunction: Extend - hold position under pressure - retract 23 litre hydraulic tank

The GHP-VDS700-DM from EDILGRAPPA is an extremely compact hydraulic power pack with a HONDA petrol engine, specially designed for operating double-acting tools under variable pressure conditions. With a powerful 1.35 HP engine at 7000 rpm, it delivers a flow rate of 2 l/min in the low-pressure range up to 100 bar and 1 l/min in the high-pressure range up to max. 700 bar. It is operated via an integrated manual valve, which can be used to safely control typical functions such as extending, holding under pressure and retracting. The device is equipped with a 2.3 litre hydraulic tank and weighs just 16.7 kg with compact dimensions of 342 x 282 x 464 mm - ideal for mobile use in confined spaces. Perfectly suited for users who rely on low weight, self-sufficient power supply and precise control - for example in mobile maintenance, rescue operations or when working off-road without a mains connection.Hydraulic pump with combustion engine (petrol)1.35 hp HONDA engine (7000 rpm)Delivery rate Low pressure: 2 L/min up to 100 BARHigh pressure: 1 L/min 100 BAR to max. 700 BARManual valve2.3 litre hydraulic tankDimensions: 342 x 282 x 464 mmWeight: 16.7 kg

The GHP-VDS700-SM from EDILGRAPPA is an extremely compact hydraulic power pack with a HONDA petrol engine, specially designed for the operation of single-acting tools. With a powerful 1.35 HP engine at 7000 rpm, it delivers a flow rate of 2 l/min in the low-pressure range up to 100 bar and 1 l/min in the high-pressure range up to max. 700 bar. It is operated via an integrated manual valve, which can be used to safely control typical functions such as extension and retraction. The device is equipped with a 2.3 litre hydraulic tank and weighs just 17 kg with compact dimensions of 342 x 282 x 464 mm - ideal for mobile use in confined spaces. Perfectly suited for users who rely on low weight, self-sufficient power supply and precise control - for example in mobile maintenance or when working in the field without a mains connection.Hydraulic pump with combustion engine (petrol)1.35 hp HONDA engine (7000 rpm)Delivery rate Low pressure: 2 L/min up to 100 BARHigh pressure: 1 L/min 100 BAR to max. 700 BARManual valve2.3 litre hydraulic tankDimensions: 342 x 282 x 464 mmWeight: 17 kg

OGURA HCC-13BLN cordless hydraulic construction steel cutter - Powerful and mobile up to 13 mm material thicknessThe OGURA HCC-13BLN is a robust cordless hydraulic steel cutter for professional use on steel components up to 13 mm thick. With a weight of just 5.1 kg including battery, it is ideal for mobile use on construction sites or in workshops.With a cutting time of just 1.6 seconds, it reliably cuts mild steel and bolts up to 13 mm. The powerful 18V Li-Ion battery ensures cordless operation without the need for a compressor or mains connection.Technical data at a glance: OGURAHCC-13BLN-M18V - Powerful cordless bolt cutter weighing just 5.1 kg including battery.Cutting diameter: Ø 13 mmCutting capacity: Ø 13 mm, 490 N/mm² tensile strengthCutting time: 1.6 secondsMotor: 18 volt DC Li-ion batteryDimensions (L x W x H): 315x273x97 mmWeight: 5.1 kgdelivery: - HCC-13BLN-M18V- MAKITA 18V/3Ah battery- MAKITA charger- Carrying case

OGURA HCC-16BLN cordless hydraulic construction steel cutter - Powerful and mobile up to 16 mm material thicknessThe OGURA HCC-16BLN is a robust cordless hydraulic steel cutter for professional use on steel components up to 16 mm thick. With a weight of just 6.9 kg including battery, it is ideal for mobile use on construction sites or in workshops.With a cutting time of just 2.6 seconds, it reliably cuts mild steel and bolts up to 16 mm. The powerful 18V Li-Ion battery ensures cordless operation without the need for a compressor or mains connection.Technical data at a glance: OGURAHCC-16BLN-M18V - Powerful cordless bolt cutter weighing just 6.9 kg including battery.Cutting diameter: Ø 16 mmCutting capacity: Ø 16 mm, 620 N/mm² tensile strengthCutting time: 2.6 secondsMotor: 18 volt DC Li-ion batteryDimensions (L x W x H): 360x276x108 mmWeight: 6.9 kgdelivery: - HCC-16BLN-M18V- MAKITA 18V/3Ah battery- MAKITA charger- Carrying case

OGURA HCC-19BLN cordless hydraulic construction steel cutter - Powerful and mobile up to 19 mm material thicknessThe OGURA HCC-19BLN is a robust cordless hydraulic steel cutter for professional use on steel components up to 19 mm thick. With a weight of just 10.9 kg including battery, it is ideal for mobile use on construction sites or in workshops.With a cutting time of just 4.5 seconds, it reliably cuts mild steel and bolts up to 19 mm. The powerful 18V Li-Ion battery ensures cordless operation without the need for a compressor or mains connection.Technical data at a glance: OGURAHCC-19BLN-M18V - Powerful cordless bolt cutter weighing just 10.9 kg including battery.Cutting diameter: Ø 19 mmCutting capacity: Ø 19 mm, 620 N/mm² tensile strengthCutting time: 4.5 secondsMotor: 18 volt DC Li-ion batteryDimensions (L x W x H): 387x301x132 mmWeight: 10.9 kgdelivery: - HCC-19BLN-M18V- MAKITA 18V/3Ah battery- MAKITA charger- Carrying case

Weight: 9.9 kgVibration level: 9.6 m/s²Impact energy: 22 JImpact frequency: 2100 min-1Tool size: Hex. 19x50 mmHydraulic requirements: 20 l/min at 100-160 bar Special version for working under water

Chainsaw with handbrakeThe new HSS hydraulic chainsaw is made entirely of stainless steel components and is therefore ideal for underwater use and demanding heavy-duty work. It is designed for professional use in a wide range of applications - for example for removing and cutting wooden piles, docks, piers and harbour facilities. It can be used in flooded areas, industrial plants or on construction sites where water is present. The HSS is also ideal for salvage and rescue operations (civil defence, fire brigade). The HSS guarantees high performance, long-term reliability and maximum safety for the user - New ergonomic handle - improved grip and control, easy to clean Integrated flow control valve in the handleSolid centre housing milled from aluminiumSafety chain brake with safety guard On/off valve for chain lubrication with oil Hydraulic motor with mechanical seal - maximum continuous speed 7,000 rpm Conical sprocket made of stainless steelSpecial order! Excluded from exchange.Technical dataChain length: 45-91 cmSpeed: 6000 rpmHydraulics: 30-45 l/min, 160-170 barDimensions without chain: 55x24x25 cmWeight: 13 kg

The KBE-AHP70 hydraulic pump from our PROFI-LINE is the ideal solution for mobile hydraulic applications in industry, maintenance and on construction sites. With a powerful 18V electric motor and two exchangeable batteries, the hydraulic pump works completely independently and guarantees a reliable pressure supply for single-acting tools. The operating pressure of 200 to 700 bar ensures a wide range of applications, while control is via a radio remote control or cable remote control. The robust design and automatic pressure cut-off guarantee safe and efficient use in demanding working environments. Thanks to the rotatable hydraulic connection (CEJN 115 series), the pump can be easily integrated into existing work processes.This battery-powered hydraulic unit is ideal for mobile use thanks to its light weight and the supplied carrying strap Pressure switch-off when the maximum pressure is reached Thermal fuse to protect against overheating Charge status controlRotatable hydraulic connection (CEJN 115 series)Scope of delivery:- BE-AHP700 battery-powered hydraulic pump - Hand-held remote control and radio remote control - MAKITA exchangeable battery 18V / 5Ah, 2 pieces- MAKITA chargerAs a manufacturer of hydraulic power units and tools and partner of numerous international brands of hydraulic tools, KW HYDRAULIK GmbH has the expertise and capacity to maintain and repair hydraulic equipment.All-round service in Germany by KW HYDRAULIK GMBHConsultancy - Repair - Maintenance - Spare parts

Hydraulics: max. 700 barLow pressure: ... L/min @ 0-20 barHigh pressure: ... L/min @ 20-700 barTank: 2.1 litresDimensions: 370x223x453 mmWeight: 24 kgAutomatic function. The process is initiated with one click and ends automatically.Crimping or cutting function can be selected as an option.4.2-inch LCD screen shows the various statuses of the different devices.The button for folding down the screen is designed so that the screen can be operated with it.Built-in data storage system, can store 200,000 crimp data.Built-in pressure sensor, can monitor the crimping process.Built-in Bluetooth module, which can transmit data via Bluetooth.Built-in GPS positioning module, you can locate the location of the device at any time.Built-in temperature detection system, can measure the ambient temperature and display on the LCD screen.Built-in 4G module, crimp data can be transmitted in real time.The LCD screen can be used to set the pressure (20/40/70MPa).Wired remote controlAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts