DYNASET

The HMG-PRO40kW is a powerful magnet generator for mounting on carrier machines such as excavators or material handlers. With a generator output of 40 kW, it reliably supplies 220 VDC direct current for demanding magnet applications in industry, recycling and material handling. It is operated via the machine's hydraulic system(112-168 l/min at max. 350 bar) and demagnetisation takes place in just 0.8 seconds. The generator supports solenoid coils with up to 39.5 kW power and a resistance range of 1.3-100 ohms. A variable operating control voltage of 6-32 VDC and optional auxiliary power connection enable flexible integration. Further information on Dynaset, the complete range of solenoid generators and the appropriate application range for construction, agricultural and municipal machinery can be found directly on our website. Hydraulics: 112-168 l/min at max. 350 barGenerator output: 40 kWMax solenoid coil output: 39.5 kWSolenoid coil resistance (20C°): 1.3-100 OhmDemagnetisation: 0.8 sOperating voltage: 220 VDCAuxiliary current: OptionalOperating control voltage: 6 - 32 VDC

The HMG-PRO6kW is a compact and efficient magnet generator for mounting on carrier machines such as excavators or handling equipment. With a generator output of 6 kW, it reliably supplies 220 VDC for supplying magnets in industrial or municipal applications. It is operated via the machine's hydraulic system(32-48 l/min at max. 210 bar). Demagnetisation takes place in just 0.8 seconds. The generator supports solenoid coils with up to 5.5 kW power and a resistance range of 8.8-100 ohms. The variable operating control voltage (6-32 VDC) and the optional auxiliary power connection enable flexible integration. You can find out more about Dynaset, the complete range of generators and the range of applications for attachments on construction, agricultural and municipal machinery directly on our website. Hydraulics: 32-48 l/min at max. 210 barGenerator output: 6 kWMax solenoid coil output: 0.5 - 5.5 kWSolenoid coil resistance (20C°): 8.8-100 OhmDemagnetisation: 0.8sOperating voltage: 220 VDCAuxiliary current: OptionalOperating control voltage: 6 - 32 VDC

Cost-effectively increases the hydraulic pressure to up to 700 bar.Increases the performance of a connected tool by increasing the cylinder force.Provides additional cylinder force without significant weight increase.Provides faster tool movement.Hydraulic input: 60 L/min at max. 350 barHydraulic output: 10 L/min at max. 700 barThe connected tool must be designed for a pressure of 700 bar!Check this with the tool manufacturer or your dealer.

Cost-effectively increases the hydraulic pressure to up to 700 bar.Increases the performance of a connected tool by increasing the cylinder force.Provides additional cylinder force without significant weight increase.Provides faster tool movement.Hydraulic input: 100 L/min at max. 350 barHydraulic output: 30 L/min at max. 700 barThe connected tool must be designed for a pressure of 700 bar!Check this with the tool manufacturer or your dealer.

Cost-effectively increases the hydraulic pressure to up to 700 bar.Increases the performance of a connected tool by increasing the cylinder force.Provides additional cylinder force without significant weight increase.Provides faster tool movement.Hydraulic input: 200 L/min at max. 350 barHydraulic output: 30 L/min at max. 700 barThe connected tool must be designed for a pressure of 700 bar!Check this with the tool manufacturer or your dealer.

Cost-effectively increases the hydraulic pressure to up to 700 bar.Increases the performance of a connected tool by increasing the cylinder force.Provides additional cylinder force without significant weight increase.Provides faster tool movement.Hydraulic input: 300 L/min at max. 350 barHydraulic output: 30 L/min at max. 700 barThe connected tool must be designed for a pressure of 700 bar!Check this with the tool manufacturer or your dealer.

Cost-effectively increases the hydraulic pressure to up to 700 bar.Increases the performance of a connected tool by increasing the cylinder force.Provides additional cylinder force without significant weight increase.Provides faster tool movement.Hydraulic input: 600 L/min at max. 350 barHydraulic output: 30 L/min at max. 700 barThe connected tool must be designed for a pressure of 700 bar!Check this with the tool manufacturer or your dealer.

Extreme pressure for the highest demands - the HPW1000 high-pressure water pump from DynasetThe HPW1000 is a powerful, hydraulically driven high-pressure water pump for demanding applications in industry, construction and municipal technology. With a maximum water pressure of 1000 bar at a delivery rate of 30 litres per minute, this model is ideal for tasks such as concrete restoration, industrial cleaning or use in special vehicles. Thanks to the robust piston-piston principle, the pump is self-priming up to a height of 3 metres. The unit is driven via a hydraulic input with 140 l/min at up to 260 bar, which enables a total output of 50 kW. The pressure ratio of 1:4 ensures maximum efficiency during operation. A cooling capacity of 8 kW is required for safe continuous operation. The HPW1000 comes from the proven manufacturer Dynaset - find out more on our manufacturer page. You can find more high-pressure water pumps hereSuitable attachments for construction, agricultural and municipal machinery Self-priming pump based on the piston-piston principle.Suction height max. 3 metresHydraulic input: 140 l/min. at max. 260 barWater output: 30 l/min. at max. 1000 barPower: 50 kWWater/hydraulic pressure ratio: 1 : 4Required cooling capacity: 8 kWScope of deliveryHigh-pressure pump

Maximum cleaning power with the HPW1200 - high-pressure water pump for industrial applications The HPW1200 from Dynaset is the perfect choice when uncompromising performance is required. With a water output of 100 litres per minute at up to 1,200 bar pressure, the pump is ideal for applications in heavy industry, concrete restoration or high-pressure cleaning in special vehicle construction.The proven piston-piston principle ensures reliable operation and self-priming function. The pump is driven by a hydraulic flow of 440 l/min at up to 350 bar - this gives it an output of 200 kW. The ratio of water pressure to hydraulic pressure is 1:4, with a cooling requirement of 35 kW. Despite its enormous power, the unit is comparatively compact at 177 kg. The quality of the HPW1200 stands for durability and efficiency - developed by the Finnish high-pressure specialist Dynaset. Discover more high-pressure water pumps in our rangeFind out about suitable attachments for construction, agricultural and municipal machinery Self-priming pump based on the piston-piston principle.Hydraulic input: 440 l/min. at max. 350 bar Water output: 100 l/min. at max. 1,200 barPower: 200 kWWater/hydraulic pressure ratio: 1 : 4Required cooling capacity: 35 kWDimensions: 915x350x265 mmWeight: 177 kgScope of deliveryHigh pressure pump

HPW130 - Hydraulically driven high-pressure pump for versatile applications up to 130 bar The HPW130 from Dynaset impresses with its high delivery rate of 180 litres per minute at 130 bar - ideal for large-scale cleaning tasks, dust control or irrigation in the construction and municipal sectors. The compact unit works according to the robust piston-piston principle and is self-priming up to a depth of 3 metres. It is driven via the hydraulic circuit - with an input of 140 l/min at up to 240 bar. The effective output is 38 kW, the pressure ratio between water and hydraulics is 1 : 2.03. A cooling capacity of 6 kW is required for reliable continuous operation. The HPW130 is ideal for use on vehicles and machines with powerful hydraulic systems. Like all Dynaset high-pressure pumps, it offers high efficiency with minimum maintenance. Discover more models: High-pressure water pumps at KW HydraulikApplication examples: Attachments for construction, agricultural and municipal machinery Self-priming pump based on the piston-piston principle.Suction height max. 3 metresHydraulic input: 140 litres/min. at max. 240 barWater output: 180 l/min. at max. 130 barPower: 38 kWWater/hydraulic pressure ratio: 1 : 2.03Required cooling capacity: 6 kWScope of deliveryHigh-pressure pump

HPW130 with recirculation valve - Hydraulically driven high-pressure pump with 130 bar The HPW130 with recirculation valve from Dynaset is a powerful, self-priming high-pressure water pump for demanding cleaning and spraying applications. With a delivery rate of 140 litres per minute at 130 bar, it is ideal for use in construction, industrial or municipal technology. The proven piston-piston principle ensures a long service life and reliable performance - even with varying requirements. Thanks to the integrated circulation valve, the water circuit is efficiently regulated, reducing wear and optimising energy consumption. The pump is designed for a hydraulic inflow of 140 l/min at max. 240 bar, with a required cooling capacity of 6 kW. Further information on technology and possible applications can be found on the following pages:Area of application: Construction, agricultural and municipal technologyTo the overview of all high-pressure water pumps Self-priming pump based on the piston-piston principle.Suction height max. 3 metres Hydraulic input: 140 l/min. at max. 240 barWater outlet: 140 l/min. at max. 130 barPower: 38 kW Water/hydraulic pressure ratio: 1 : 2.03Required cooling capacity: 6 kWScope of delivery:High-pressure pump with circulation valve

HPW160 - Hydraulically driven high-pressure pump with 160 bar The HPW160 from Dynaset is a compact but powerful high-pressure water pump based on the proven piston/piston principle, which is particularly suitable for smaller applications with limited hydraulic volume. With a delivery rate of 18 litres per minute at 160 bar, it delivers precise cleaning power while using energy efficiently. It works reliably with a hydraulic inflow of 18 litres/min at max. 210 bar and requires only 1 kW cooling power. The self-priming function with a suction height of up to 3 metres extends the range of applications - from municipal vehicles to construction sites. Further information is available at: Areas of application: Construction, agricultural and municipal technology Discover more high-pressure pumps Self-priming pump based on the piston-piston principle.Suction height max. 3 metres Hydraulic input: 18 l/min. at max. 210 barWater outlet: 18 l/min. at max. 160 barPower: 4.8 kW Water/hydraulic pressure ratio: 1 : 0.88Required cooling capacity: 1 kWScope of deliveryPump

HPW160 - Hydraulic high-pressure water pump with recirculation valve and pressure gauge The HPW160 from Dynaset is a reliable high-pressure water pump for professional use, especially where compact solutions with constant performance are required. With a delivery rate of 18 litres per minute at up to 160 bar, it is ideal for precise cleaning and rinsing work. The self-priming piston-piston pump achieves a suction height of up to 3 metres. Thanks to the integrated recirculation valve, the water flow can be safely diverted when the lance is closed. The pressure gauge also ensures simple and reliable pressure monitoring during operation. The pump operates with a hydraulic inflow of 18 l/min at max. 210 bar, delivering 4.8 kW of power and requiring only 1 kW of cooling power - an efficient solution for flexible field use. Further information and suitable solutions can be found at Areas of application: Construction, agricultural and municipal technology To the overview of all high-pressure water pumps Self-priming pump based on the piston-piston principle.Suction height max. 3 metres Hydraulic input: 18 l/min. at max. 210 barWater outlet: 18 l/min. at max. 160 barPower: 4.8 kW Water/hydraulic pressure ratio: 1 : 0.88Required cooling capacity: 1 kWScope of delivery:High-pressure pump with circulation valve and pressure gauge

HPW1600 - Hydraulic high-pressure water pump, 15 l/min at 1600 bar The HPW1600 from Dynaset is one of the most powerful water-driven high-pressure pumps in its class. With a maximum working pressure of 1,600 bar and a flow rate of 15 litres per minute, this pump is suitable for demanding applications such as industrial cleaning, cutting technology or specialised maintenance work. The piston-piston pump is self-priming (max. 3 m suction height) and is hydraulically driven. The hydraulic input is 140 l/min at max. 230 bar, with a power consumption of 40 kW. The water/hydraulic pressure ratio is 1 : 7.87, the required cooling capacity is only 6 kW. The unit is supplied as a ready-to-use high-pressure pump that can be seamlessly integrated into existing systems. For further information, please contact: Discover areas of application Show more high pressure pumps Self-priming pump based on the piston-piston principle.Suction height max. 3 metresHydraulic input: 140 l/min. at max. 230 barWater outlet: 15 l/min. at max. 1600 barPower: 40 kWWater/hydraulic pressure ratio: 1 : 7.87Required cooling capacity: 6 kWScope of deliveryHigh-pressure pump

HPW180 - Hydraulically driven high-pressure water pump, 90 l/min at 180 bar The HPW180 from Dynaset is a powerful water-driven high-pressure pump that has been specially developed for robust applications in construction, municipal technology or cleaning. With a delivery rate of 90 litres per minute at a pressure of up to 180 bar, it reliably delivers high cleaning performance - even under continuous load. The self-priming piston-piston pump can draw in water from a depth of up to 3 metres. The hydraulic drive requires 115 l/min at a maximum of 210 bar. With an output of 27 kW and a pressure ratio of 1 : 1.12, this pump is ideal for high-pressure applications on vehicles, attachments or mobile cleaning systems. The recommended cooling capacity is 6 kW. Find out more: View areas of application To the overview of all high-pressure water pumps Self-priming pump based on the piston-piston principle.Suction height max. 3 metresHydraulic input: 115 l/min. at max. 210 barWater output: 90 l/min. at max. 180 barPower: 27 kWWater/hydraulic pressure ratio: 1 : 1.12Required cooling capacity: 6 kWScope of deliveryHigh-pressure pump

HPW180 - Hydraulically driven high-pressure water pump, 90 l/min at 180 bar with recirculation valve The HPW180 high-pressure pump from Dynaset with integrated recirculation valve is the ideal solution for applications with varying water requirements or short pressure pauses. It delivers a constant 90 litres per minute at up to 180 bar and is suitable for professional use on vehicles or in mobile cleaning systems. Thanks to the piston-piston principle, the pump is self-priming and can pump water from a depth of up to 3 metres. It is hydraulically driven with an input of 115 l/min at a maximum of 210 bar. The output is 27 kW, the pressure ratio is 1 : 1.12, and a cooling capacity of 6 kW is recommended for safe operation. Further information: View areas of application Discover more high-pressure pumps Self-priming pump based on the piston-piston principle.Suction height max. 3 metres Hydraulic input: 115 l/min. at max. 210 barWater outlet: 90 l/min. at max. 180 barPower: 27 kW Water/hydraulic pressure ratio: 1 : 1.12Required cooling capacity: 6 kWScope of delivery:High-pressure pump with circulation valve

HPW220 - Hydraulically driven high-pressure water pump with recirculation valve, 50 l/min at 220 bar The HPW220 with integrated recirculation valve and pressure gauge is a powerful high-pressure pump for professional applications in the cleaning of machines, vehicles or construction sites. Developed according to the piston-piston principle, it is self-priming and pumps water from a suction height of up to 3 metres. The hydraulic drive capacity is 70 l/min at max. 210 bar, generating a water output of 50 l/min at up to 220 bar. With an output of 18 kW, a pressure ratio of 1:1.26 and a required cooling capacity of 3 kW, the pump is ideal for continuous operation under difficult conditions. The pump is manufactured by the Finnish quality manufacturer Dynaset, known for its durable and low-maintenance hydraulic solutions. Scope of delivery: High-pressure pump with circulation valve and pressure gauge Further information & related solutions: Discover areas of application To the category High-pressure water pumps Self-priming pump based on the piston-piston principle.Suction height max. 3 metres Hydraulic input: 70 l/min. at max. 210 barWater output: 50 l/min. at max. 220 barPower: 18 kWWater/hydraulic pressure ratio: 1 : 1.26Required cooling capacity: 3 kWScope of delivery:High-pressure pump with circulation valve and pressure gauge

The HPW220 Double Dust for Excavator from Dynaset is a powerful hydraulic high-pressure dust suppression system that has been specially developed for attachment to excavators. With a water flow rate of 21.2 l/min in standard mode and up to 42.4 l/min in high-pressure mode, it ensures effective dust suppression directly at the work site - ideal for demolition work, material handling or civil engineering. Equipped with 2 standard nozzles and 2 high-pressure nozzles, the system delivers targeted water distribution at a maximum working pressure of 220 bar (recommended: 140 bar). The hydraulic supply is 70 l/min at max. 210 bar - optimised for modern excavator hydraulics. In addition to nozzles, suction filter, high-pressure pump and control valves, the scope of delivery also includes a washing lance with 10 m hose and a robust hose reel with 20 m hose. For even more application flexibility, additional nozzles, an additional solenoid valve and a 1000 litre water tank are available on request. Max. Water pressure: 220 barRecommended water pressure: 140 barWater flow rate: 21.2 l/minHigh-pressure water flow: 42.4 L/minHydraulics: 70 L/min at max. 210 barNumber of standard nozzles: 2Number of high-pressure nozzles: 2Scope of delivery: Nozzles, suction filter, washing lance with 10 m hose, high-pressure pump, control valves and hose reel with 20 m hoseOn request:Additional nozzlesAdditional solenoid valveWater tank 1000 litre

The HPW220 Dust For Crusher - Three Conveyors from Dynaset is a specialised hydraulic high-pressure dust suppression system designed specifically for use on conveyor belt systems - for example in crushing plants or material processing centres. With a water flow rate of 42.6 litres/min and a working pressure of up to 220 bar (recommended: 140 bar), this system offers reliable dust suppression at up to three transfer points. The unit is equipped with 6 high-pressure nozzles and is operated via a hydraulic output of 70 l/min at max. 210 bar. This makes it ideal for continuous operation in demanding industrial environments. In addition to nozzles, high-pressure pump, suction filter and control valves, the scope of delivery also includes a washing lance with 10 m hose and a hose reel with 20 m hose for maximum reach during manual cleaning operation. Additional nozzles, an additional solenoid valve and a 1000 litre water tank are available for individual requirements. Max. Water pressure: 220 barRecommended water pressure: 140 barWater flow rate: 42.6 l/minHydraulics: 70 l/min at max. 210 barNumber of nozzles: 6Scope of delivery: Nozzles, suction filter, washing lance with 10 m hose, high-pressure pump, control valves and hose reel with 20 m hoseOn request:Additional nozzlesAdditional solenoid valveWater tank 1000 litresTip: Read our article on the benefits of dust control with high-pressure water mist to find out more about the mode of action, environmental benefits and areas of application of this technology.

The hydraulic high-pressure dust binding system HPW220 Dust for Crusher - Two Conveyors from Dynaset has been specially developed for use on crushing plants with two conveyor belts. With a water flow rate of 34.6 litres per minute at a maximum pressure of 220 bar, the system achieves particularly fine atomisation of the water at five strategically positioned nozzles. The reliable hydraulic supply of up to 70 litres per minute at 210 bar ensures consistently high performance - even under continuous load. Thanks to the robust design with high-pressure pump, control valves, suction filter and 20 m hose reel, the system is ready for immediate use and can be easily integrated into existing machinery. The additional washing lance with 10 m hose extends the range of functions for manual cleaning work on site. For further information on the mode of action and efficiency of this technology, we recommend our article on the advantages of dust control with high-pressure water mist. Max. Water pressure: 220 barRecommended water pressure: 140 barWater flow rate: 34.6 l/minHydraulics: 70 L/min at max. 210 barNumber of nozzles: 5Scope of delivery: Nozzles, suction filter, washing lance with 10 m hose, high-pressure pump, control valves and hose reel with 20 m hoseOn request:Additional nozzlesAdditional solenoid valveWater tank 1000 litres

Self-priming pump based on the piston-piston principleSuction height max. 3 metresHydraulic input: 70 l/min. at max. 210 barWater outlet: 50 l/min. at max. 220 barPower: 18.5 kWRequired cooling capacity: 3 kWScope of delivery: HPW 220 with pressure gauge, support frame with wheels, 3 m suction hose, 10 m hose including spray lance and 2.5 m hydraulic hoses

HPW250 - Hydraulically driven high-pressure water pump, 30 l/min at 250 bar The HPW250 is a compact and reliable high-pressure pump for demanding cleaning tasks in industry, construction or municipal technology. Thanks to the piston-piston principle, it is self-priming with a maximum suction height of 3 metres - ideal for mobile applications in changing conditions. With a hydraulic input of 40 l/min at up to 250 bar, the pump generates a water output of 30 l/min at a maximum of 250 bar. The power consumption is 12.5 kW, the pressure ratio of water to hydraulics is 1 : 1.18. A cooling capacity of 2.5 kW is required for trouble-free continuous operation. The model comes from the proven manufacturer Dynaset, known for high-quality, low-maintenance hydraulic systems "Made in Finland". Scope of delivery: High-pressure pump Further information: Discover areas of application To category High-pressure water pumps Self-priming pump based on the piston-piston principle.Suction height max. 3 metres Hydraulic input: 40 l/min. at max. 250 barWater output: 30 l/min. at max. 250 barPower: 12.5 kW Water/hydraulic pressure ratio: 1 : 1.18Required cooling capacity: 2.5 kWScope of deliveryHigh-pressure pump

HPW250 - High-pressure water pump with recirculation valve, 30 l/min at 250 barThe HPW250 with recirculation valve is a robust, hydraulically driven high-pressure pump designed especially for precise and continuous applications. It is based on the piston-piston principle and is self-priming - with a maximum suction height of 3 metres.With a hydraulic input of 40 l/min at up to 210 bar, it delivers a water output of 30 l/min at a maximum of 250 bar. The power consumption is 12.5 kW, the pressure ratio is 1 : 1.18. A cooling capacity of 2.5 kW is recommended for reliable continuous operation.This version also has an integrated circulation valve and a pressure gauge, allowing the pressure to be regulated and controlled even more reliably - ideal for sensitive applications in industry, construction or machine cleaning.Made by the renowned manufacturer Dynaset, which stands for durable hydraulic solutions.Scope of delivery: High-pressure pump with recirculation valve and pressure gaugeFurther information:Discover areas of applicationTo category High-pressure water pumpsData sheetSelf-priming pump based on the piston-piston principle. Suction height max. 3 metres Hydraulic input: 40 l/min. at max. 210 barWater outlet: 30 l/min. at max. 250 bar Power: 12.5 kW Water/hydraulic pressure ratio: 1 : 1.18Required cooling capacity: 2.5 kWScope of delivery:High-pressure pump with circulation valve and pressure gauge

The HPW250 Double Dust for Excavator from Dynaset is a powerful hydraulic high-pressure dust control system specially developed for attachment to excavators. With a water flow rate of 10.6 L/min for the standard function and an additional high pressure output of 21.2 L/min, the system delivers effective dust control with minimal water consumption - ideal for dust-intensive applications on construction and demolition sites. Driven by a hydraulic supply of 40 L/min at up to 210 bar, the system supplies a total of four nozzles - two standard and two high-pressure nozzles - with uniform water pressure of up to 250 bar. In addition to the high-pressure pump, control valves and suction filter, the scope of delivery also includes a washing lance with a 10 m hose and a hose reel with a 20 m high-pressure line. Additional components such as additional nozzles or a 1,000 litre water tank are available on request. You can also find out more about dust control with high-pressure water mist in our informative article on the benefits of dust control with high-pressure water mist.Max. Water pressure: 250 barRecommended water pressure: 140 barWater flow rate: 10.6 l/minHigh-pressure water flow rate: 21.2 L/minHydraulics: 40 L/min at max. 210 barNumber of standard nozzles: 2Number of high-pressure nozzles: 2Scope of delivery: Nozzles, suction filter, washing lance with 10 m hose, high-pressure pump, control valves and hose reel with 20 m hoseOn request:Additional nozzlesAdditional solenoid valveWater tank 1000 litre