SIMEX

SIMEX ART is a patented technology specifically designed for the regeneration of bituminous mixes, reusing 100% of the material on site without the need to remove milled material or add other materials.It is installed at a depth of 30 to 100 mm in the functional road surface. Vehicle traffic is not affected and the road is immediately passable. It also ensures an adequate service life, allowing local authorities to plan road maintenance, which benefits the safety of users.Functional stepsMilling and regenerationThe asphalt is milled off to a depth of 30-100 mm. The milled material is mixed with the regenerating additive and crushed to a defined grain size. MixingThe milled material is mixed with the binding agent (e.g. cement) in the milling drum. The mix is distributed evenly over the surface.CompactingCompaction is then carried out using a roller or compactor plate.Road surface made of 100% reclaimed asphalt mix can be driven on immediately.Areas of applicationSimex ART has been specially developed for the functional repair of road surfaces such as Branched or "crocodile skin" cracksbulges, depressions, corrugationsPotholes and detachmentsLocalised changes to the surface such as Loss of adhesion and smoothing of aggregatesTemporary pavementObjectivesThe aim of Simex ART is threefold: To quickly and effectively repair damage to the road surface without completely disrupting the road network and, above all, without the need to repeatedly carry out emergency repairs. The cost of purchasing and processing new raw materials is eliminated, as only the bituminous conglomerate available on site is used. Environmental sustainability: recovery and regeneration of 100% of the material available on site and reduction of traffic on the construction site through the purchase of new materials and the removal of the removed materials.

The SIMEX VSE20 with 0.4 m³ bucket volume is the ideal separator bucket for smaller excavators in the 8-13 tonne range when screening is required in confined spaces. Thanks to the patented SIMEX adjustment system, the grain size can be adjusted hydraulically directly from the cab, whether in inner-city sewer construction, gardening and landscaping or when separating fine material in confined spaces. Thanks to their disc design, the two screen shafts generate intensive turbulence and therefore a high degree of separation accuracy with a fast material throughput rate. Stepless adjustment of the screen size. With the mechanism developed and patented by SIMEX, the distance between the screen shafts can be controlled hydraulically from the cab and thus thegrain size of the screened material can be adjusted. If the excavator is equipped with double-acting hydraulics, the adjustment is made from the cab via a joystick. Productivity: The shafts consist ofdisc elements with different diameters, which create a strong turbulence of the material to be screened. Easily interchangeable screening elements with different profiles are available for processing different materials. The screening elements can be replaced quickly without having to remove the shafts.Technical dataBucket volume: 0.05 m³Opening width: 510 mmTotal width: 715 mmScreening area: 0.13 m²Number of sieve shafts: 2Operating weight: 105 kgHydraulics: 20-30 l/min at max. 250 barRecommended excavator weight: 1.5-3 tonnes

SIMEX VSE2 separator bucket - 0.05 m³ volume for mini and micro excavatorsThe SIMEX VSE2 with 0.05 m³ bucket volume is the most compact version in the VSE series and has been specially developed for use with mini excavators from 1.5 to 3 tonnes. Ideal for tight construction sites, refurbishment of existing buildings or inner-city projects where space, fine material and low excavator weight play a role. In contrast to the larger models, the VSE2 does not have a hydraulically adjustable screen size. Instead, high-quality screen shafts with interchangeable disc profiles are used, which can be individually configured depending on the material requirements.Technical dataBucket volume: 0.05 m³Opening width: 510 mmTotal width: 715 mmScreening area: 0.13 m²Number of sieve shafts: 2Operating weight: 105 kgHydraulics: 20-30 l/min at max. 250 barRecommended excavator weight: 1.5-3 tonnes