MALAGUTI

The MALAGUTI PLURY W1 series of vibratory drive systems are compact, hydraulically powered units featuring an oscillating mass. Designed for versatile use in professional civil engineering, gardening and landscaping, as well as in foundation and pipework construction. Thanks to their multifunctionality, they can be used for trenching, compaction or cutting, depending on the accessories selected.They are easy to operate and deliver impressive performance: high centrifugal forces, reliable frequency values and efficient hydraulic operation ensure precise results even under demanding conditions. The various model variants differ in centrifugal force, frequency, hydraulic power and weight – and can be optimally adapted to the specific requirements. You can also find suitable accessoriesfor the PLURY W1 series in our online shop.VIBRATION DRIVE With a single machine, you can compact, pre-drill and cut.Multifunctional accessoriesWide range of accessoriesVersatile Vibration drive with a single massTechnical data:Centrifugal force: Vibration frequency: Hertz: Oil flow rate: Pressure: Weight: 

The MALAGUTI PLURY W2 series of vibratory drive systems are compact, hydraulically powered units featuring two oscillating masses. The dual flyweights direct the centrifugal force in the direction of work. The compaction force is significantly higher than that of machines with only a single oscillating mass. Designed for versatile use in professional civil engineering, gardening and landscaping, as well as in foundation and pipework construction. Thanks to their multifunctionality, they can be used for trenching, compaction or cutting, depending on the accessories selected.Operation is simple, and performance is impressive: high centrifugal forces, reliable frequency values and efficient hydraulic operation enable precise results even under demanding conditions. The various model variants differ in terms of centrifugal force, frequency, hydraulic power and weight – and can be optimally adapted to the specific requirements. You can also findsuitable accessoriesfor the PLURY W2 series in our online shop.VIBRATION DRIVE With a single machine, you can compact, pre-drill and cut.Multifunctional accessoriesWide range of accessoriesVersatile vibration drive with a single massTechnical data:Centrifugal force: Vibration frequency: Hertz: Oil flow rate: Pressure: Weight: 

A wide range of tips, available in standard diameters or made to measure, are available, featuring a double helix in the first section, where penetration into the ground requires a great deal of force.Standard length: 1000 mm (Other lengths can be manufactured on request.)Standard diameter: 100–500 mm. Other diameters can be manufactured on request.Shank: 70 mm hexagonal. Other shank types can be manufactured on request.The use of high-quality, reinforced steel ensures the drill bits’ durability in extreme operating conditions.

TheMALAGUTI VORTEXattachment-type earth augers are high-performance drilling systems designed for professional use in earthworks and civil engineering. They are ideally suited for mini-excavators and excavators with an operating weight of 6ß to 290 kg, thus covering a wide range of applications. Each drive head is fitted with a solid steel frame. A choice of different mountings is available. The drive shaft ensures a reliable connection to the drill bit and facilitates quick tool changes. The augers are available in various diameters and designs for different soil types – whether soft topsoil or hard rock: withMALAGUTI, you’re perfectly equipped. All models are fitted with a double-helix drill bit and replaceable teeth.Each head has a steel frame and a hexagonal shaft for attaching the auger. Various mounting options are available, depending on your requirements. (Please also see our earth augers for attachment to wheel loaders and front-end loaders)You can choose between various standard diameters and custom sizes. The augers are available for soft or rocky soils. All augers consist of a double spiral and have replaceable teeth. Reinforced versions are available for rocky ground. The augers can be quickly extended using a hexagonal coupling. SpecificationsTorque:Connection: 50 mm hexHydraulics:Standard drilling diameter:Excavator weight:

TheMALAGUTI VORTEXattachment-type earth augers are high-performance drilling systems designed for professional use in earthworks and civil engineering. This series is specifically designed for use on wheel loaders. The rotary drives are supplied with a mounting plate.Each drive head is fitted with a solid steel frame. A choice of different mountings is available. The drive shaft ensures a reliable connection to the auger and facilitates quick tool changes. The augers are available in various diameters and designs to suit different soil types – whether soft topsoil or hard rock: withMALAGUTI, you’re perfectly equipped. All models are fitted with a double-helix drill bit and replaceable teeth.Each head has a steel frame and a hexagonal shaft for connecting the auger. Mounting plate for attachment to a wheel loader, mini loader or front loader.You can choose between various standard diameters and custom sizes. The augers are available for soft or rocky soils. All augers consist of a double spiral and have replaceable teeth. Reinforced version for rocky ground. The augers can be quickly extended using a hexagonal coupling. SpecificationsTorque:Connection: 50 mm hexHydraulics:Standard drilling diameter:Excavator weight:

Suitable for driving and extracting sheet piles in various soil typesLightweight design Technical specifications:- Weight: - Oil flow rate: - Pressure: - Vibration frequency: - Centrifugal force: - Torque: - Hertz: 

Suitable for driving and extracting sheet piles in various soil typesHeavy-duty design Technical specifications:- Weight: - Oil flow rate: - Pressure: - Vibration frequency: - Centrifugal force: - Torque: - Hertz: 

Suitable for driving and extracting sheet piles in various types of soilSwivelling design Technical specifications:- Weight: - Oil flow rate: - Pressure: - Vibration frequency: - Centrifugal force: - Torque: - Hertz: 

TheMALAGUTIPLURY ABSORBER is a shock-absorbing rubber component for centring bells used in pile-driving applications. Designed to reduce impact forces during the vibratory driving of concrete piles, the absorber reliably protects against material damage and increases the service life of the piles.This accessory is specifically compatible withMALAGUTI PLURY vibratory driveswhen used in conjunction with theGRAPPLE timber grappleforpile drivers. Its easy integration into existing systems makes the absorber the ideal addition for professional applications in fencing, foundation and utility line construction.Available in the following variants:150 × 150 mm / 8–40200 × 200 mm / 8–40250 × 250 mm / 8–40300 × 300 mm / 8–40350 × 350 mm / 8–40You can find accessories and add-on components for theMALAGUTI PLURYin ourMALAGUTI brand shop.

The PLURY Asphalt Cutteris a robust and high-performance attachment unit designed specifically for the precise cutting of asphalt surfaces.Precise cuttingWith a cutting depth of 120 mm, the cutter delivers clean cuts through asphalt – ideal for preparing site access roads, digging trenches or excavating asphalt surfaces.Compact designThe dimensions of the unit, as per the technical specifications, are:A = 400 mmB = 440 mmC = 420 mmD = 250 mmE = 115 mmF = 12 mmLightweightThe cutter weighs 56 kg, making it relatively light and easy for the carrier machine to handle.Durability & robustnessThe design and choice of materials are tailored to the rigours of everyday construction site use – ensuring the cutter can withstand frequent use in demanding conditions.Suitable for MALAGUTI PLURY vibratory driveW1 27.0 | W1 40.0

The PLURY BELL centring bell has been specially designed for use withMALAGUTI PLURY vibratory driving systemsand ensures precise centring and vertical guidance of the pile during the vibratory driving of timber, concrete or steel piles.The precise mounting holds the pile securely in place, enabling controlled driving whilst minimising stress on the material. Depending on the configuration, the bell is compatible with carrier machines ranging from 4 tonnes to 40 tonnes, making it ideally suited for applications in fence construction, foundation work or the installation of fencing.Available sizes / centring options:150 × 150 mm / 1–4.5150 × 150 mm / 4–12150 × 150 mm / 8–40200 × 200 mm / 1–4.5200 × 200 mm / 4–12200 × 200 mm / 8–40250 × 250 mm / 4–12250 × 250 mm / 8–40300 × 300 mm / 8–40350 × 350 mm / 8–40 You can find further accessories for the PLURY vibratory drive in ourbrand shop.Designed for the vibro-driving of timber, concrete and steel postsCentres the post and facilitates vertical driving

The PLURY BELL CONCRETE is a specially developed centring device for the precise guidance of steel reinforcement during the driving of concrete piles with steel cages. The bell centres the reinforcement cage during the vibration process, thereby ensuring safe, uniform penetration into the ground without deformation or misalignment of the reinforcement.This version is designed for use withMALAGUTIPLURY vibratory drives of the modelsW2-60.0,W2-80.0,W2-100.0,W2-120.0, W2-150.0andW2-180.0. With an internal diameter of Ø 650 mm, the bell is ideally suited for large-format reinforcement elements in civil engineering and foundation work.

The PLURY PLATE compaction platehas been specially developed for use with theMALAGUTI PLURY vibratory driveand enables the professional compaction of a wide variety of surfaces, includingtrenches, ground, steep walls and hard-to-reach areas.The combination of high vibration energy and precise plate guidance creates a homogeneous, load-bearing sub-base that can withstand even intense loads over the long term. Its design also allows work to be carried out in difficult positions, e.g. on embankments or in confined workspaces.Available in a wide range of sizes, the compactor can be optimally adapted to the specific requirements of each application – from inner-city pipework installation to surface compaction on large-scale projects.Further attachments for compaction and pile driving can be found inthe MALAGUTI brand shop.

The PLURY DRILL BIT is a robust pilot drill bit designed for penetrating hard substrates, such as compacted soil, rocky terrain or heavily consolidated layers. The drill bit has been specially developed for use with theMALAGUTI PLURY vibratory drivein combination with theGRAPPLE timber grapplefor pile driving. Pre-drilling with the PLURY DRILL BIT improves penetration during the subsequent driving of piles and reduces the strain on both the machine and the material.

Designed for the vibro-driving and extraction of timber, concrete and steel posts Suitable for preventing landslides, securing docks and embankments, and constructing vineyards, orchards and fences  A fundamental combination used in land conservation and agricultureTechnical dataGripper diameter:Centrifugal force: Weight:  Suitable PLURY models: 

The PLURY H-BEAM CLAMP is a gripping clamp specially developed byMALAGUTI for driving in and extracting H-beams usinga vibratory drive. Its robust construction ensures reliable results even in difficult ground conditions. From soft soils to compacted layers. The clamp achieves a pressing force of up to 28 t, depending on the hydraulic pressure applied, and provides a secure, form-fit connection between the vibratory hammer and the beam. This makes it ideally suited for foundation engineering applications, temporary shoring, pipeline construction or sheet pile wall structures.Clamp for the vibro-driving and extraction of H-beams in various soil types Clamping force: 23 tonnes at 200 bar28 tonnes at 250 barWeight: 170 kgSuitable for MALAGUTI PLURY vibratory drive W2-60.0, W2-80.0, W2-100.0, W2-120.0, W2-150.0 and W2-180.0

The PLURY ONE-WHEEL compaction wheels, or roller wheels, have been specially developed for use with theMALAGUTI PLURY vibratory driveand enable the professional compaction of a wide variety of surfaces, particularlyin cable trenches or pipe trenches.Compaction wheels – the solution for challenging applicationsOur compaction wheels are used wherever vibratory plates cannot be accommodated or where their vibrations could cause damage. Ideal for narrow sewer trenches and areas adjacent to sensitive structures. They offer the perfect solution for backfilling pipe and sewer trenches.Your benefits at a glance:Vibration-free compaction – with no additional noise emissionsMaximum compaction performance through rolling and kneading actionDirect attachment to the excavator – no additional hydraulics requiredReduces labour costs – works more efficiently and quicklyLow-maintenance & durable – fitted with high-quality roller bearingsSave on landfill costs – through optimised soil preparationTechnical dataRecommended excavator weight:A:A1:B:C:D:E:F:Weight:For PLURY:

The PLURY RUBBER CLAMP is a set of rubber protective jaws designed to retrofit theGRAPPLE timber grapplefor use with concrete or steel piles. They provide improved grip during vibratory driving and extraction, as well as protecting sensitive surfaces, without compromising gripping force.Ideally suited for use withMALAGUTI PLURY vibratory drivesand for excavators with a carrier weight of 1 to 4.5 tonnes, the rubber jaws are particularly useful for fence construction, foundation work or pile driving in existing structures.Product benefits:Non-slip grip on smooth pilesGentle on surfaces thanks to the soft rubber designPrecisely tailored to GRAPPLE pile grapplesAccessories for pile grapples and vibratory hammers can be found intheMALAGUTIbrandshop.Rubber protective jaws for concrete and steel postsBetter gripprotect the surfaceSuitable for the MALAGUTI PLURY vibratory hammer with GRAPPLE timber grapple for pile drivers

The PLURY SHEET PILE CLAMP is a robust, specialised clamp designed for the vibratory driving and extraction of sheet piles in various ground conditions. It is also ideal for vibrating steel cages embedded in concrete, for example in foundation work or for bracing in specialist civil engineering projects.Thanks to its high clamping force of up to 28 t, the clamp ensures a secure and force-fit connection betweenthe MALAGUTI PLURY vibratory driveand the sheet pile profile or steel structure. Its compact design allows it to be used even in confined site conditions.Pliers suitable for vibro-driving and extracting sheet piles in various types of terrainIdeal for vibrating steel cages embedded in concrete Pressure force23 tonnes at 200 bar28 tonnes at 250 barWeight: 170 kgSuitable for MALAGUTI PLURY vibration driveW2-60.0, W2-80.0, W2-100.0, W2-120.0, W2-150.0 and W2-180.0

The PLURY STORM compaction wheels, or roller wheels, have been specially developed for use with theMALAGUTI PLURY vibratory driveand enable the professional compaction of a wide variety of surfaces, particularlyin cable trenches or pipe trenches.Compaction wheels – the solution for challenging applicationsOur compaction wheels are used wherever vibratory plates cannot be accommodated or where their vibrations could cause damage. Ideal for narrow sewer trenches and areas adjacent to sensitive structures. They offer the perfect solution for backfilling pipe and sewer trenches.Your benefits at a glance:Vibration-free compaction – with no additional noise emissionsMaximum compaction performance through rolling and kneading actionDirect attachment to the excavator – no additional hydraulics requiredReduces labour costs – works more efficiently and quicklyLow-maintenance & durable – fitted with high-quality roller bearingsSave on landfill costs – through optimised soil preparationTechnical dataRecommended excavator weight: A: A1: B: C: D: E: F: Weight:For PLURY:

The PLURY T-PLATE, a narrow sole designed as a single-slide unit, has been specially developed for use with theMALAGUTI PLURY vibratory driveand enables the professional compaction of a wide variety of surfaces, particularlyin cable or pipe trenches.The combination of high vibration energy and precise plate guidance creates a uniform, load-bearing subgrade that withstands even intensive loads over the long term. Its design also allows work to be carried out in difficult positions, e.g. on embankments or in confined spaces.Available in a wide range of sizes, the compactor can be optimally adapted to the specific requirements of each application – from inner-city utility installation to laying work on large-scale projects.Further attachments for compaction and pile driving can be found inthe MALAGUTI brand shop.Ideal for compaction work in narrow trenchesEnables the tamper to reach deep into the groundParticularly suitable for backfilling fibre-optic and underground utility cables

The PLURY TWIN-PLATE, a narrow sole designed as a double-slide unit, has been specially developed for use with theMALAGUTI PLURY vibratory driveand enables the professional compaction of a wide variety of surfaces, particularlyin cable or pipe trenches.The combination of high vibration energy and precise plate guidance creates a uniform, load-bearing sub-base that withstands even intensive loads over the long term. The design also allows work to be carried out in difficult positions, e.g. on embankments or in confined spaces.Available in a wide range of sizes, the compactor can be optimally adapted to the specific requirements of each application – from inner-city utility installation to laying work on large-scale projects.Further attachments for compaction and pile driving can be found inthe MALAGUTI brand shop.Ideal for compaction work in narrow trenchesEnables the tamper to reach deep into the groundParticularly suitable for backfilling fibre-optic and underground utility cables

The PLURY TWIN-WHEEL double compaction wheels, or roller wheels, have been specially developed for use with theMALAGUTI PLURY vibratory driveand enable the professional compaction of a wide variety of surfaces, particularlyin cable trenches or pipe trenches.Compaction wheels – the solution for challenging applicationsOur compaction wheels are used wherever vibratory plates cannot be accommodated or where their vibrations could cause damage. Ideal for narrow sewer trenches and areas adjacent to sensitive structures. They offer the perfect solution for backfilling pipe and sewer trenches.Your benefits at a glance:Vibration-free compaction – with no additional noise emissionsMaximum compaction performance through rolling and kneading actionDirect attachment to the excavator – no additional hydraulics requiredReduces labour costs – works more efficiently and quicklyLow-maintenance & durable – fitted with high-quality roller bearingsSave on landfill costs – through optimised soil preparationTechnical dataRecommended excavator weight:A:A1:B:C:D:E:F:Weight:For PLURY:

The PLURY KN double-compression plates are used for the rapid compaction of large areas.The two vibration units, mounted side by side, ensure a high level of compaction.Thanks to their large contact surface, these vibratory plates are ideal for working on squares, cycle paths, etc.Technical specificationsWidth: 120–220 cmWeight: 400–1,330 kgHydraulics: 2 x 23 L/min at max. 220 bar or2 × 31 L/min at max. 220 bar or2 x 37 L/min at max. 220 barIMPORTANT! Please specify the flow rate you can provide.