Core drilling machines

The HCD25-100 – a hand-held hydraulic core drill with a bore diameter of 25–100 mm – is one of the most powerful and, at the same time, user-friendly machines in its class. Designed for flexible drilling in hard-to-reach areas, it is used wherever neither electric drills nor drill stands are practical – for example, when drilling into concrete pipes, ventilation shafts or during installation work in existing buildings. The machine is fully hand-held, requires no separate drill stand and is suitable for almost all materials. For particularly demanding applications, the HCD25-100 can also be adapted to a standard drill stand – offering maximum flexibility for professional use. An integrated hydraulic torque limiter system (ASCO) ensures maximum safety during drilling: if the drill becomes jammed, the machine switches off automatically and reliably prevents kickback. For safety reasons, the factory-set safety function must not be altered. Important: In the event of a blockage, the core must be removed from the material before drilling is resumed. Technically, the unit impresses with a speed of 1500 min⁻¹, a drilling range of Ø 25–100 mm and a hydraulic flow rate of 20 l/min at 100–172 bar. The drive adapter supplied (½" BSP socket with 1-1/4" UNC plug) ensures compatibility with standard drill bits. The sound pressure level is just 84 dB, making the unit comfortable to use even during prolonged operations. Available from KW Hydraulik – your specialist supplier of high-quality hydraulic drilling technology from Hycon. Ideal for anyone looking for a tool that combines efficiency, safety and mobility. The HCD-25-100 is one of the most powerful and user-friendly hand-held core drilling machines on the market. It is perfectly suited to hand-held drilling in hard-to-reach areas where drilling stands or electric drills cannot be used. Drilling concrete pipes, ventilation holes or any other type of work where hand-held tools offer the quickest solution. It is extremely easy to use and suitable for any material. No drill stand is required. However, for heavy-duty work, the HCD-25-100 can also be fitted into a standard drill stand. The core drill is fitted with a built-in hydraulic torque limiter (ASCO system), which ensures maximum torque and prevents kickback if the drill bit becomes jammed. The core drill has an automatic integrated safety function that stops the core drill bit if it becomes jammed. However, in the event of jamming, always remove the drill core from the material before resuming drilling. The integrated safety function is factory-set and must not be tampered with.Hydraulics: 20 L/min at 100–172 barDrilling diameter: ø25–ø100Rotational speed: 1500 rpmDrive adapter : Includesa ½" BSP socket with a 1-1/4" UNC plug adapterSound pressure level at 1 m LWA: 84 dB Vibration level: <2.5m/s² 

The HCD50-200 – a hand-held hydraulic core drill with a bore diameter of 50–200 mm – is a real powerhouse for mobile use on construction sites. As one of the most powerful yet user-friendly core drilling machines in its class, it is specifically designed for drilling in hard-to-reach areas – ideal where drilling rigs or electric drills cannot be used. Typical applications include drilling concrete pipes, ventilation holes or installation openings – particularly in the sewerage sector, where the machine is particularly valued for its resistance to water and dust. The HCD50-200 even allows hand-held drilling up to Ø 350 mm, which offers enormous time savings in flexible applications. For particularly demanding tasks, the unit can optionally be integrated into a standard drill rig. An integrated hydraulic torque limiter (ASCO system) ensures safe operation: if the drill bit becomes jammed, the automatic safety function kicks in and prevents kickback. The safety cut-out is factory-set and must not be altered. In the event of jamming, the drill core must always be released manually before the operation is restarted. Technically, the unit impresses with a speed of 600 min⁻¹, a drilling range of Ø 50–200 mm, a hydraulic flow rate of 20 l/min at 100–172 bar and a very low vibration level of less than 2.5 m/s². The sound pressure level is just 80 dB – ideal for prolonged use. Weighing just 7.6 kg, the HCD50-200 is also particularly easy to handle. Available from KW Hydraulik – your partner for high-quality core drilling technology from Hycon, when maximum performance with minimum effort is what matters. The HCD-50-200 is one of the most powerful and user-friendly hand-held core drilling machines on the market. It is perfectly suited to hand-held drilling in hard-to-reach areas where drilling stands or electric drills cannot be used. Drilling concrete pipes, ventilation holes or any other type of work where hand-held equipment offers the quickest solution. It is resistant to water, dust and so on, and is very popular for sewage installations. The fact that you can drill up to ø350 mm by hand, without the need for a drill stand, opens up a wide range of applications and delivers enormous time savings. With the HCD-50-200, you can drill up to 350 mm by hand. For heavy-duty work, however, the unit can also be fitted into a standard drill stand. The core drill is fitted with a built-in hydraulic torque limiter (ASCO system), which ensures maximum torque and prevents kickback if the drill bit becomes jammed. The core drill has an automatic, integrated safety function that stops the core drill bit if it becomes jammed. However, in the event of jamming, always remove the drill core from the material before resuming drilling. The integrated safety function is factory-set and must not be tampered with.Hydraulics: 20 L/min at 100–172 barDrilling diameter: ø50–ø200Rotational speed: 600 rpmDrive adapter: Includes a ½" BSP socket with a 1-1/4" UNC plug adapterSound pressure level at 1 m LWA: 80 dB Vibration level: <2.5m/s² Weight: 7.6 kg