Installation solutions for vehicles with a power take-off (PTO)

The KWDY system combines a hydraulically driven power generator and a screw compressor (1,300 l/min at 10 bar) for permanent installation in vans with a reinforced auxiliary drive (PTO+, 40 kW), such as the Mercedes Sprinter, VW Crafter or MAN TGE. It supplies 6.5 kVA of electricity (400/230 V) and compressed air for demanding applications such as earth-moving rockets or tools on construction sites. The unit is based on tried-and-tested Dynaset technology and is supplied complete with a hydraulic pump, generator, compressor, oil tank, oil cooling system, filter and all vehicle-specific components. Installation included. Further installation solutions for vehicles with a power take-off (PTO) can be found here. Note: Oil cooling for the power take-off (PTO) must be provided by the vehicle. The PTO must be suitable for hydraulic pumps (multi-spline shaft). Screw compressor with 1,300 L/min at 10 bar (e.g. for earth rockets)6.5 kVA power generator (400/230 volts)System for installation in vehicles with a reinforced power take-off (40 kW), for example the VW CRAFTER, MAN TGE and MERCEDES SPRINTER, with an oil cooler for the power take-off* to ensure increased continuous output.Your van’s engine serves as the drive for this system.Specifications: 230 volts / 14.2 A / blue CEE socket or SCHUKO 400 volts / 10 kVA / 9.4 A / red CEE socket Air compressor, 1300 L/min at 10 barScope of delivery: Hydraulic pump with adapter for power take-off*Note: The oil cooling system for the power take-off must be ordered from the vehicle manufacturer!Electric generator,Air compressorHydraulic oil tank, oil cooler, oil filter,vehicle-specific cables and adaptors Price includes fitting. (Hoses, etc.)* The power take-off must be fitted for connection to a hydraulic pump; multi-spline shaft.

The KWF COMPACT AIR 650/10 is a pre-assembled hydraulic unit designed for permanent installation in service and workshop vehicles, developed by the manufacturer FEP. The system combines power generation (up to 10 kVA) and compressed air supply (650 l/min at a maximum of 10 bar) in a compact frame module.Thanks to an optional power take-off (PTO), the unit is suitable for vehicles with or without PTO preparation. It is driven by the vehicle’s engine. The 25-litre pressure reservoir, an integrated oil tank with cooling and filter, and a digital control system ensure professional continuous operation.Ideal for mobile workshops and bespoke vehicle conversions.Further installation solutions can be found here.Complete unit in a frame. Supplied to specialist workshops only.HYDRO COMPACT AIR650/10 is a unit designed for installation in service and workshop vehicles. It can be fitted to vehicles with or without an existing PTO (power take-off)* on the gearbox.Your van’s engine serves as the drive source.The following are fitted within the frame:10 kVA power generator; depending on the installation configuration, this generator delivers 5,000 to 8,000 watts (400 volts)230 volts / 5 kVA / 16 A / blue CEE socket or SCHUKO400 volts / 10 kVA / 16 A / red CEE socketAir compressor, max. 650 L/min at max. 10 bar, with 25-litreair receiver, BSP1/2" female thread connectionHydraulic oil tank, oil cooling, oil filter, control valve, pipeworkControl unit with digital display of the main functionsSupplied without connection hoses* The PTO must be prepared for connecting a hydraulic pump; multi-spline shaft.

The HYDRO COMPACT ELECTRIC – PTO-GEAR system from FEP supplies mobile power via the vehicle’s power take-off (PTO). The unit is permanently fitted and is ideal for rear-wheel-drive workshop, service or tradesmen’s vehicles. Once installed, the hydraulic pump generates electricity for the generator at a stable frequency – 230 V up to 5 kVA or 400 V up to 10 kVA, available via CEE or SCHUKO sockets. Included in the scope of delivery: Hydraulic pump with PTO adapter, power generator with fuel tank, oil cooling, filter, control unit and vehicle-specific cabling. Installation by KW Hydraulik; vehicle delivery required. Further installation solutions can be found here. HYDRO COMPACT ELECTRIC – PTO-GEAR provides mobile power for your service and workshop vehicles. Installation kit for rear-wheel-drive vehicles with an existing PTO take-off*. Your vehicle’s engine drives a hydraulic pump. The energy generated in this way can be used anywhere in the vehicle to drive our generator, which supplies electricity at a constant frequency. Specifications: 230 volts / 5 kVA / 16 A / blue CEE socket or SCHUKO 400 volts / 10 kVA / 16 A / red CEE socket Scope of supply:Hydraulic pump with PTO adapter*Power generator unit with hydraulic tank, oil cooling, filter, control unit with vehicle-specific cables and adaptors  Price includes installation. For installation in your vehicle, the vehicle must be delivered to us and collected from us. These transport costs are not included.* The power take-off must be suitable for connecting a hydraulic pump; multi-spline shaft.

The KWF-COMBY – HYDRO COMBY SW-F300 – PTO-GEAR model is a compact, multifunctional unit for service and workshop vehicles fitted with a power take-off (PTO) – for example, the VW Crafter (up to model year 2016). The unit is driven directly by the vehicle’s engine via a hydraulic pump and combines power generation, compressed air supply, welding technology and hydraulic functions in a single system. Features include a 230 V output (5 kVA / 16 A / blue CEE socket or Schuko) and a 400 V output (10 kVA / 16 A / red CEE socket). The integrated welding machine delivers up to 300 A of welding current, features a connection for an SK 35/50 plug and an interface for a remote control. The air compressor delivers 1,000 L/min at 12 bar with a 25 L air receiver (BSP ½" female thread connection). In addition, the system offers a hydraulic connection with a flow rate of 20/30 L/min at 140 bar (including flat-face couplings) for external applications. Installation is included in the price; the vehicle must be delivered to and collected from KW Hydraulik. The compressed air hose, welding cable set and remote control are not included in the scope of delivery. Further solutions for vehicles with a power take-off (PTO) can be found here: Installation solutions. Manufacturer: FEP. HYDRO COMBY SW-F300 - PTO-GEAR is a unit designed for installation in service and workshop vehicles.It can be fitted to rear-wheel-drive vehicles with an existing PTO on the gearbox*.Your van’s engine drives the generator, compressor and hydraulic pump.Specifications:230 volts / 5 kVA / 16 A / blue CEE socket or SCHUKO 400 volts / 10 kVA / 16 A / red CEE socket 300-amp electrode welding machine with connection for cable remote controlConnection for SK 35/50 welding cable plug, pin Ø13mm(Welding cable set and cable remote control not included in the scope of delivery.)Air compressor, 1000 L/min at 12 bar, BSP 1/2" female thread connectionHydraulic connection for external applications, 20/30 L/min at 140 bar, FLATFACE couplingsScope of delivery:Hydraulic pump with adapter for PTO connectionPower generator unit with integrated welding machine and connection for cable remote control.Welding cable set and cable remote control not included in the scope of deliveryAir compressor with 25-litre air receiver, connection BSP 1/2" female threadSupplied without compressed air hose and accessoriesHydraulic tank, oil cooling, filterControl unit with vehicle-specific cables and adaptors Price includes installation. (Hoses, etc.)For installation in your vehicle, the vehicle must be delivered to us and collected from us. These transport costs are not included.* The power take-off must be prepared for the connection of a hydraulic pump; multi-spline shaft.