Magnetic energy

The CMG-PRO10kW from Dynaset is an efficient magnetic generator designed for direct mounting on the magnet, specifically for demanding lifting and sorting applications. With an output of 10 kW, it supplies an operating voltage of 220 VDC for solenoid coils with a resistance of 5.4–100 ohms. The integrated demagnetisation in just 0.8 s ensures fast work cycles. Thanks to innovative pressure accumulator technology, a leak oil connection is no longer required – the generator can withstand up to 50 bar back-pressure on the tank line. Typical applications include construction, municipal and recycling machinery, as well as mobile magnetic systems. Further solutions of this type can be found in the Dynaset power generator range. Hydraulics: 44–69 L/min (max. internally limited) at max. 350 bar Generator output: 10 kW Max. solenoid coil power: 1.0–9.1 kW Demagnetisation: 0.8 s Magnetic coil resistance (20 °C): 5.4–100 ohms Operating voltage: 220 VDC Auxiliary power: OptionalNEW! Dynaset’s new CMG generation is fitted with a pressure accumulator that enables a back-pressure of 50 bar in the tank line, compared to 5 bar in the previous models. Consequently, no leakage line is required.

The CMG-PRO15kW from Dynaset is a high-performance magnet generator designed for direct mounting on the magnet. It delivers up to 15 kW of power at an operating voltage of 220 V DC – ideal for demanding solenoid applications with coil resistances between 3.6 and 50 ohms. Thanks to rapid demagnetisation in just 0.8 seconds, the generator enables efficient and rapid work cycles. The new CMG generation is equipped with an integrated pressure accumulator and can withstand back-pressure of up to 50 bar – thereby eliminating the need for the leak oil connection previously required. Ideal for attachments on construction, municipal and recycling machinery. You can find further generator solutions from Dynaset in the overview of Dynaset power generators. Hydraulics: 68–102 L/min (max. internally limited) at max. 260 bar Generator output: 15 kW Max. solenoid coil power: 14.5 kW Demagnetisation: 0.8 s Solenoid resistance (20 °C): 3.6–50 ohms Operating voltage: 220 VDC Auxiliary power: OptionalNEW! Dynaset’s new CMG generation is fitted with a pressure accumulator that enables a back-pressure of 50 bar in the tank line, compared to 5 bar in previous models. Consequently, no leakage line is required.

The CMG-PRO20kW from Dynaset is a robust magnetic generator designed for direct mounting on the magnet, delivering up to 20 kW of power at an operating voltage of 220 VDC. With a maximum solenoid coil power of 19.5 kW and a coil resistance of 2.6–50 ohms, it is ideally suited to demanding lifting and sorting applications. Particularly efficient: the demagnetisation time of just 0.8 seconds significantly shortens work cycles. The new CMG series features an integrated pressure accumulator that allows back-pressure of up to 50 bar – meaning a leak oil connection is no longer required. Ideal for use with attachments for construction, municipal or recycling machinery. Further variants and suitable generator solutions can be found in the Dynaset generator range. Hydraulics: 94 L/min (max. internally limited) at 210 bar   Generator output: 20 kW Max. solenoid power: 19.5 kW Demagnetisation: 0.8 s Solenoid resistance (20 °C): 2.6–50 ohms Operating voltage: 220 VDC Auxiliary power: OptionalNEW! Dynaset’s new CMG generation is fitted with a pressure accumulator that enables a back-pressure of 50 bar in the tank line, compared to 5 bar in previous models. Consequently, no leakage line is required.

The CMG-PRO30kW from Dynaset is a high-performance magnet generator designed for direct mounting on the magnet, developed for the toughest industrial applications. With a generator output of 30 kW at 220 V DC and a maximum magnet coil power of 29.5 kW, this model is suitable for large magnet applications, such as those in the scrap and recycling industries. Thanks to a demagnetisation time of just 0.8 seconds, the generator operates quickly and efficiently. The current generation of CMG units is fitted with an integrated pressure accumulator that allows back-pressure of up to 50 bar in the return line – a leak oil line is no longer required. Ideal for use with attachments for construction and municipal machinery. Further generator variants can be found in the Dynaset power generator range. Hydraulics: 122 L/min (max. internally limited) at 210 bar Generator output: 30 kW Max. solenoid coil power: 29.5 kW Demagnetisation: 0.8 s Solenoid resistance (20 °C): 1.8–100 ohms Operating voltage: 220 VDC Auxiliary power: OptionalNEW! Dynaset’s new CMG generation is fitted with a pressure accumulator that enables a back-pressure of 50 bar in the tank line, compared to 5 bar in previous models. Consequently, no leakage line is required.

The CMG-PRO3kW from Dynaset is a compact magnetic generator that can be mounted directly onto the magnet, designed for applications with low power requirements. With a generator output of 3 kW at 220 V DC and a solenoid coil power rating of 0.5 to 3 kW, this model is ideally suited for smaller lifting magnets or precision cutting tasks in industry and recycling. Demagnetisation takes just 0.8 seconds. The new generation is fitted with an integrated pressure accumulator that allows back pressure of up to 50 bar – a leak oil line is not required. Perfectly suited for attachments in construction and municipal engineering. Discover other Dynaset power generators in our range too. Hydraulics: 21–31 L/min (max. internally limited) at max. 350 bar  Generator output: 3 kW Max. solenoid coil power: 0.5–3 kW Demagnetisation: 0.8 sSolenoid resistance (20 °C): 15–100 ohms Operating voltage: 220 VDC Auxiliary power: OptionalNEW! Dynaset’s new CMG generation is fitted with a pressure accumulator that enables a back-pressure of 50 bar in the tank line, compared to 5 bar in previous models. Consequently, no leakage line is required.

The CMG-PRO40kW from Dynaset is the most powerful model in the new CMG series, designed for direct mounting on the magnet. With a generator output of 40 kW and a maximum solenoid coil power of 39.5 kW, it is ideally suited to demanding lifting and sorting tasks in the scrap, construction or recycling sectors. Thanks to rapid demagnetisation (0.8 s) and a 220 VDC operating voltage, the system operates reliably and efficiently. The new CMG generation is equipped with a pressure accumulator that allows a back-pressure of up to 50 bar – a leakage oil line is not required. Ideal for use on attachments for construction, agricultural and municipal machinery. Further variants can be found in the overview of Dynaset magnetic generators. Hydraulics: 167 L/min (max. internally limited) at 210 bar Generator power: 40 kW Max. solenoid coil power: 39.5 kW Demagnetisation: 0.8 s Solenoid resistance (20 °C): 1.3 – 100 ohms Operating voltage: 220 VDC Auxiliary power: OptionalNEW! Dynaset’s new CMG generation is fitted with a pressure accumulator that enables a back-pressure of 50 bar in the tank line, compared to 5 bar in previous models. Consequently, no leakage line is required.

The CMG-PRO6kW from Dynaset is a compact and efficient hydraulic generator designed for direct magnet mounting, ideal for light to medium-duty applications in scrap handling or material handling. With a generator output of 6 kW and a maximum solenoid coil power of 5.5 kW, it delivers reliable performance in a compact design. Thanks to rapid demagnetisation in just 0.8 seconds and an operating voltage of 220 V DC, it is ideally suited to demanding load cycles. The new CMG generation does not require an oil drain line – made possible by an integrated pressure accumulator with a back-pressure capacity of up to 50 bar. Ready for use with attachments for construction, agricultural and municipal machinery. Further sizes and variants can be found in the overview of Dynaset magnetic generators. Hydraulics: 3248 L/min (max. internally limited) at max. 350 bar Generator power: 6 kW Max. solenoid coil power: 0.5–5.5 kW Demagnetisation: 0.8 s  Solenoid coil resistance (20 °C): 8.8–100 ohms Operating voltage: 220 VDC Auxiliary power: OptionalNEW! Dynaset’s new CMG generation is fitted with a pressure accumulator that enables a back-pressure of 50 bar in the tank line, compared to 5 bar in the previous models. Consequently, no leakage line is required.

Lifting chains included Also available with quick-connect couplings on request Hydraulics:46 L/minRequired pressure 190 bar Maximum pressure 350 barGenerator power: 10 kW Max. solenoid coil power: 9.5 kW Permissible solenoid coil resistance (20 °C): 5.4 ± 5% ohms Demagnetisation: 0.8 s Operating voltage: 220 ±5% VDC 

Lifting chains includedAlso available with quick-connect couplings on requestHydraulics:21 L/min Required pressure 190 bar Maximum pressure 350 barGenerator power: 3 kWMax. solenoid coil power: 2.7 kW Permissible solenoid resistance (20 °C): 16.1 ± 5% ohms Demagnetisation: 0.8 s Operating voltage: 220 ±5% VDC 

Lifting chains included Also available with quick-connect couplings on request Hydraulics: 32 L/min Required pressure: 190 bar Maximum pressure: 350 bar Generator power: 6 kW Max solenoid coil power: 5.5 kW Permissible solenoid resistance (20°C): 9.8 ± 5% ohms Demagnetisation: 0.8 s Operating voltage: 220 ±5% VDC 

The HMG-PRO10kW from Dynaset is a robust, hydraulically driven generator designed to supply power to solenoid coils on carrier machines such as excavators or material-handling equipment. With a generator output of 10 kW, it is ideally suited for use with solenoid coils ranging from 1.0 to 9.1 kW at an operating voltage of 220 V DC. The fast demagnetisation time of 0.8 seconds ensures rapid work cycles in scrap handling. The generator operates reliably with a hydraulic flow rate of 44–69 l/min at a maximum pressure of 210 bar. The control voltage of 6–32 VDC allows for flexible integration into various vehicle types. Further variants and models can be found in the overview of Dynaset magnetic generators. Applications: Attachments for construction, agricultural and municipal machinery. Hydraulics: 44–69 l/min at a maximum of 210 bar Generator power: 10 kW Max. solenoid coil power: 1.0–9.1 kW Magnetic coil resistance (20°C): 5.4–100 ohmsDemagnetisation: 0.8 sOperating voltage: 220 VDC Auxiliary power: Optional Operating control voltage: 6–32 VDC

The HMG-PRO15kW from Dynaset is a high-performance, hydraulically operated solenoid generator designed for mounting on carrier machines such as excavators or material-handling equipment. With a generator output of 15 kW, it reliably supplies magnetic coils up to 14.5 kW at 220 V DC. Thanks to its short demagnetisation time of 0.8 s, the generator is ideally suited to scrap handling or other demanding applications. It operates with a hydraulic flow rate of 68–102 l/min at a maximum pressure of 260 bar. The control voltage of 6–32 VDC allows for easy integration into various machine designs. Further models can be found in the overview of Dynaset power generators. Typical applications: attachments for construction, agricultural and municipal machinery. Hydraulics: 68–102 l/min at a maximum of 260 bar Generator power: 15 kW Max. solenoid coil power: 14.5 kW Solenoid resistance (20°C): 3.6–50 ohms Demagnetisation: 0.8 sOperating voltage: 220 VDC Auxiliary power: Optional Control voltage: 6–32 VDC

The HMG-PRO20kW from Dynaset is a robust magnetic generator designed for mounting on carrier machines such as excavators or material-handling equipment. With a generator output of 20 kW, it reliably supplies 220 VDC direct current to solenoid coils with a power consumption of up to 18.6 kW. It is hydraulically operated at 100–150 l/min at a maximum pressure of 210 bar, whilst a demagnetisation time of just 0.8 s ensures efficient operation. The generator does not require a separate drain oil line and, thanks to an operating control voltage of 6–32 V DC, can be flexibly integrated into existing systems. Further models can be found in the Dynaset power generator range. The generator is ideally suited for attachments in the construction, agricultural and municipal sectors.Hydraulics: 100–150 L/min at max. 210 bar Generator power: 20 kW Max. solenoid power: 18.6 kW Solenoid resistance (20°C): 2.6–50 ohms Demagnetisation: 0.8 sOperating voltage: 220 VDC Auxiliary power: Optional Control voltage: 6–32 VDC

The HMG-PRO30kW is a high-performance hydraulic magnet generator designed for mounting on carrier machines such as excavators or material-handling equipment. With a generator output of 30 kW and a maximum solenoid coil power of 29.5 kW, it reliably supplies 220 VDC direct current for industrial applications. It is operated via the machine’s hydraulic system at 112–168 l/min and a maximum pressure of 350 bar. The short demagnetisation time of 0.8 seconds ensures fast and precise operation. Thanks to an operating control voltage of 6–32 V DC, the unit can be flexibly integrated – without the need for a separate leak oil line. You can find out more about the manufacturer at Dynaset. Further variants and applications can be found in the Dynaset Power Generators category and in the section on attachments for construction, agricultural and municipal machinery. Hydraulics: 112–168 L/min at max. 350 bar Generator output: 30 kW Max. solenoid power: 29.5 kW Solenoid resistance (20°C): 1.8–100 ohms Demagnetisation: 0.8 sOperating voltage: 220 VDC Auxiliary power: Optional Control voltage: 6–32 VDC

The HMG-PRO3kW is a compact hydraulic magnet generator designed for mounting on carrier machines such as excavators or material-handling equipment. With a generator output of 3 kW, it is ideally suited to smaller lifting magnet applications and reliably supplies 220 VDC direct current. The generator is powered by the carrier machine’s hydraulic system (at 21–31 l/min and a maximum of 210 bar) and offers a short demagnetisation time of just 0.8 seconds. Thanks to the variable operating control voltage of 6–32 V DC, flexible integration is easily achievable. The auxiliary power connection is optional. You can find out more about Dynaset, as well as other suitable magnet generators and their applications in construction, agricultural and municipal machinery, directly on our website. Hydraulics: 21–31 l/min at max. 210 bar Generator output: 3 kWMax. solenoid coil power: 0.5–3 kWMagnetic coil resistance (20°C): 15–100 ohmsDemagnetisation: 0.8 sOperating voltage: 220 VDCAuxiliary power: OptionalOperating control voltage: 6–32 VDC

The HMG-PRO40kW is a high-performance magnetic generator designed for mounting on carrier machines such as excavators or material-handling equipment. With a generator output of 40 kW, it reliably supplies 220 VDC direct current for demanding magnet applications in industry, recycling and material handling. It is operated via the machine’s hydraulic system (112–168 l/min at a maximum of 350 bar), with demagnetisation taking just 0.8 seconds. The generator supports solenoid coils with a power rating of up to 39.5 kW and a resistance range of 1.3–100 ohms. A variable operating control voltage of 6–32 V DC and an optional auxiliary power connection enable flexible integration. Further information on Dynaset, the complete range of magnetic generators and their suitable applications for construction, agricultural and municipal machinery can be found directly on our website. Hydraulics: 112–168 L/min at max. 350 barGenerator power: 40 kW Max. solenoid coil power: 39.5 kW Magnetic coil resistance (20°C): 1.3–100 ohms Demagnetisation: 0.8 sOperating voltage: 220 VDC Auxiliary power: OptionalOperating control voltage: 6–32 VDC

The HMG-PRO6kW is a compact and efficient magnetic generator designed for mounting on carrier machines such as excavators or material-handling equipment. With a generator output of 6 kW, it reliably supplies 220 VDC to power magnets in industrial or municipal applications. It is operated via the machine’s hydraulic system (32–48 l/min at a maximum of 210 bar). Demagnetisation takes just 0.8 seconds. The generator supports solenoid coils with a power rating of up to 5.5 kW and a resistance range of 8.8–100 ohms. The variable operating control voltage (6–32 V DC) and the optional auxiliary power connection allow for flexible integration. You can find out more about Dynaset, the full range of generators and their applications for attachments on construction, agricultural and municipal machinery directly on our website. Hydraulics: 32–48 L/min at max. 210 bar Generator power: 6 kW Max. solenoid power: 0.5–5.5 kW Solenoid resistance (20°C): 8.8–100 ohmsDemagnetisation: 0.8 sOperating voltage: 220 V DC Auxiliary power: Optional Operating control voltage: 6–32 VDC

A suitable generator is required to operate these magnetsPlate and gripper mounts are available as optional extrasSpecial sizes, shapes and finishes are available on requestMaximum solenoid power: 5.5 kW Permissible solenoid resistance (20°C): 8.8 ± 5% ohms Operating voltage: 220 ±5% VDC 

A suitable generator is required to operate these magnets Plate and gripper mounts are available as optional extras Special sizes, shapes and finishes are available on request Maximum solenoid power: 9.0 kW Permissible solenoid resistance (20°C): 5.4 ± 5% ohms Operating voltage: 220 ±5% VDC 

A suitable generator is required to operate these magnets Plate and gripper mounts are available as optional extras Special sizes, shapes and surface finishes are available on request Maximum solenoid power: 10.0 kW Permissible solenoid resistance (20°C): 4.8 ± 5% ohms Operating voltage: 220 ±5% VDC 

A suitable generator is required to operate these magnets Plate and gripper mounts are available as optional extras Special sizes, shapes and finishes are available on request Maximum solenoid power: 12.5 kW Permissible solenoid resistance (20°C): 3.9 ± 5% ohms Operating voltage: 220 ±5% VDC 

A suitable generator is required to operate these magnets Plate and gripper mounts are available as optional extras Special sizes, shapes and finishes are available on request Maximum solenoid power: 15.0 kW Permissible solenoid resistance (20°C): 3.2 ± 5% ohms Operating voltage: 220 ±5% VDC 

A suitable generator is required to operate these magnets Plate and gripper mounts are available as optional extras Special sizes, shapes and surface finishes are available on request Maximum solenoid power: 16.0 kW Permissible solenoid resistance (20°C): 3.0 ± 5% ohms Operating voltage: 220 ±5% VDC 

A suitable generator is required to operate these magnets Plate and gripper mounts are available as optional extras Special sizes, shapes and finishes are available on request Maximum solenoid power: 20.0 kW Permissible solenoid resistance (20°C): 2.4 ± 5% ohms Operating voltage: 220 ±5% VDC