Compressors

HKR2500AD Hydraulic screw compressor unit with 2,500 L/min air output from DynasetThe HKR2500 screw compressor delivers a constant compressed air supply of 2,500 L/min at 7 bar and reaches a maximum pressure of 10 bar (145 PSI) - ideal for mobile applications with high air requirements. Whether on construction sites, in municipal vehicles or in mobile workshops: The HKR2500 impresses with its compact design, high efficiency and reliable performance.The automatic speed control, the integrated air pressure control with pressure relief and the integrated pressure gauge ensure optimum control and operational safety. The hydraulic output range is 27-100 l/min at max. 245 bar, nominal 37-67 l/min at 175-225 bar - perfectly matched for machines with medium to high hydraulic pressure.In the HKR2500AD version, the HKR2500 is supplied in a weatherproof housing that allows it to be mounted on a loading platform . All necessary components are installed in the housing.An oil cooler is already integrated in the housing.Equipped in this way, the HKR2500AD unit is primarily designed for installation on the loading area and is the ideal solution for work vehicles, pick-ups and service vans, making it perfect for pneumatic applications in the field.Typical applications:Attachments for construction, agricultural and municipal machinery and hydraulic systems for commercial vehicles up to 7.5 tonnesKW Hydraulik - your partner for mobile high-performance compressed air systems.All connections of the HKR hydraulic compressor are located on the same side of the device. Seen from the left-hand side, the air outlet (PA) comes first, followed by the electrical cable entry, the load sensing line (LS) and finally the hydraulic pressure line and the return line on the right-hand side of the unit.What's in the box? Let's talk about the technical data.The HKR-AD screw compressor units are available for 12 and 24 volt systems.The uniqueness of this compressor series lies in its extreme performance. The HKR2500-AD delivers up to 88 CFM of air at 145 PSI, all in a compact unit.An important feature is that you can perfectly customise the air output of the compressor to your needs by controlling the hydraulic flow. In addition, the unit has a speed control cartridge that allows the user to exceed the hydraulic oil flow by up to 50% of the rated value, thus protecting the compressor.The HKR Hydraulic Above Deck compressor has an integrated hydraulic oil coolerwhich ensures optimum performance even in continuous, demanding applications. The housing is designed to withstand harsh conditions through the use of robust covers and frame construction. This robust construction ensures a long service life without compromise.Maintenance of the HKR hydraulic screw compressor is effortless. At its heart is the reliable DYNASET HKR hydraulic screw compressor, which requires minimal maintenance. The unit is designed so that the user has easy access to all main components.Easy installation and low maintenanceInstalling the HKR compressor for installation on the loading area is very simple:Choose the installation location on your lorry.Bolt the device to the integrated mounting frame and the lifting points - no dismantling required.Connect the hydraulic hoses (pressure and return) and plug in the electrical control cable.Connect the air hose to the air outlet.Technical dataEffective flow rate: 2,500 l/min at 7 bar (87 PSI), 7-10 bar (145 PSI) Oil volume: 27-100 L/min at max. 245 barNominal: 37-67 L/min at 175-225 barAutomatic speed controlAir pressure control with pressure reliefPressure gauge

EKR2500 - Electric screw compressor with 2,500 l/min compressed air output from DynasetThe DYNASET EKR electric screw compressor converts the electrical energy of a mobile machine, vehicle or ship into compressed air.The EKR electric screw compressor is the ideal solution for anyone looking for a powerful, machine-integrated, electrically driven compressor for continuous use. This compact and robust device is specially designed for demanding 24/7 operation and is therefore ideal for pneumatic applications in electric mining machines, drilling rigs, agricultural machinery, construction machinery and maintenance vehicles. Seamlessly integrated into the machine, it utilises the existing battery as a power source and eliminates the need for a separate motor or inverter.Technical dataCompressorCompressed air delivery rate: 2,500 litres/min at max. 10 barPower consumptionVoltage, nominal: 400 volts (VDC)Voltage range: 400-700 volts (VDC)Max. current at 400 V: 61 AMax. Current at 700 V: 34 AProtection class: IP65Cooling systemWater/glycol: 50/50Coolant flow rate: 30 l/min at 2 barCooling input temperature, max.: 50°Cooling power requirement*: 17 kWDimensions and weightDimensions: 783x670x576 mm (LxWxH)Weight: 185 kgKey benefits and featuresCompact device for demanding 24/7 continuous operationIdeal for a wide range of pneumatic applications, including mining, drilling, construction and agricultureEasy to operate and quick to install on machines or vehiclesIntegrated directly into the machine so it is always on board and ready for useLow maintenance requirements reduce downtime and operating costsGenerates an air flow of 2,500 l/min to 4,000 l/minDelivers an air pressure of up to 10 bar (145 psi)Compatible with 400 V and 600 V systemsThe compact and robust structure ensures durability in difficult conditionsExcellent power to size ratio, maximising efficiencyOptional extras are available, including a hose reel for convenient operation and high-performance cyclone intake air filters for extreme conditionsHow does the electric screw compressor work?The electric compressor is integrated into the electrical and cooling systems of a machine, vehicle or ship.The electricity from the battery is fed to the integrated electric motor of the electric compressor.The electric motor drives the compressor and generates compressed air.The cooling system of the machine, vehicle or ship keeps the compressor at the optimum operating temperature.The electric screw compressor can work around the clock as long as the battery is sufficiently charged.

EKR4000 - Electric screw compressor with 4,000 l/min compressed air output from DynasetThe DYNASET EKR electric screw compressor converts the electrical energy of a mobile machine, vehicle or ship into compressed air.The EKR electric screw compressor is the ideal solution for anyone looking for a powerful, machine-integrated, electrically driven compressor for continuous use. This compact and robust device is specially designed for demanding 24/7 operation and is therefore ideal for pneumatic applications in electric mining machines, drilling rigs, agricultural machinery, construction machinery and maintenance vehicles. Seamlessly integrated into the machine, it utilises the existing battery as a power source and eliminates the need for a separate motor or inverter.Technical dataCompressorCompressed air delivery rate: 4,000 litres/min at max. 10 barPower consumptionVoltage, nominal: 400 volts (VDC)Voltage range: 400-700 volts (VDC)Max. current at 400 V: 86 AMax. Current at 700 V: 50 AProtection class: IP65Cooling systemWater/glycol: 50/50Coolant flow rate: 35 l/min at 2 barCooling input temperature, max.: 45°Cooling power requirement*: 25 kWDimensions and weightDimensions: 783x670x576 mm (LxWxH)Weight: 185 kgKey benefits and featuresCompact device for demanding 24/7 continuous operationIdeal for a wide range of pneumatic applications, including mining, drilling, construction and agricultureEasy to operate and quick to install on machines or vehiclesIntegrated directly into the machine so it is always on board and ready for useLow maintenance requirements reduce downtime and operating costsGenerates an air flow of 2,500 l/min to 4,000 l/minDelivers an air pressure of up to 10 bar (145 psi)Compatible with 400 V and 600 V systemsThe compact and robust structure ensures durability in difficult conditionsExcellent power to size ratio, maximising efficiencyOptional extras are available, including a hose reel for convenient operation and high-performance cyclone intake air filters for extreme conditionsHow does the electric screw compressor work?The electric compressor is integrated into the electrical and cooling systems of a machine, vehicle or ship.The electricity from the battery is fed to the integrated electric motor of the electric compressor.The electric motor drives the compressor and generates compressed air.The cooling system of the machine, vehicle or ship keeps the compressor at the optimum operating temperature.The electric screw compressor can work around the clock as long as the battery is sufficiently charged.

HK1000 - Hydraulic piston compressor with 1,000 L/min delivery rate from Dynaset The HK1000 piston compressor delivers a reliable compressed air supply of up to 1,000 L/min at 6 bar (effective) and reaches a maximum pressure of 12 bar (174 PSI). Powered by hydraulics, the system impresses with its compact design, robust construction and high efficiency - ideal for mobile use on construction and municipal machines, commercial vehicles and service vehicles up to 7.5 tonnes. With an integrated 13-litre compressed air reservoir, an operating pressure range of 170 to max. 230 bar and an oil volume requirement of 12-50 l/min, the HK1000 can be flexibly adapted to a wide range of machine concepts. The duty cycle of 75 % over 10 minutes guarantees continuous and powerful compressed air generation even under demanding conditions. The hydraulically driven compressor is ideal for applications in the following areas construction, agricultural and municipal machinery as well as in hydraulics for commercial vehicles. KW Hydraulik - your partner for mobile compressed air solutions with system. Effective flow rate: 1,000 l/min at 6 bar (87 PSI), max. 12 bar (174 PSI) Oil volume: 12-50 litres/min at 170 bar (max. 230 bar)Integrated pressure accumulator: 13 litresDuty cycle 75% / 10 min

HK450 - Hydraulic piston compressor with 450 L/min compressed air output from Dynaset The HK450 piston compressor from Dynaset delivers an effective compressed air output of 450 l/min at 6 bar, with a maximum working pressure of 8 bar (116 PSI) - also available as a special version with up to 10 bar on request. Compact, efficient and hydraulically driven, the HK450 is particularly suitable for use on construction, municipal or commercial vehicles and mobile machines. Thanks to an integrated 4.27 litre compressed air accumulator, an operating range of 10-21 L/min oil volume at 130-210 bar and a duty cycle of 75% over 10 minutes, the compressor offers a powerful solution for a wide range of requirements in the tightest of spaces - reliable and low-maintenance. Typical areas of application are Attachments for construction, agricultural and municipal machinery as well as hydraulics for commercial vehicles up to 7.5 tonnes. KW Hydraulik - your specialist for compact and powerful compressed air systems. Effective flow rate: 450 l/min at 6 bar (87 PSI), max. 8 bar (116 PSI) (special version with max. 10 bar available)Oil volume: 10-21 L/min at 130 bar (max. 210 bar)Integrated pressure accumulator: 4.27 litresDuty cycle 75% / 10 min

HKL1300 – Hydraulic vane compressor with a compressed air output of 1,300 L/min from DynasetThe HKL1300 vane compressor from Dynaset delivers an effective compressed air flow rate of 1,300 L/min at 6 bar and achieves a maximum pressure of 8 bar (116 PSI). Thanks to its compact design and hydraulic drive, it is ideally suited for use on construction machinery, municipal vehicles and mobile service units.Equipped with automatic speed control, integrated cooling, an oil reservoir, automatic pressure relief and a solenoid control valve for the off-load valve, the HKL1300 enables efficient and reliable operation even under demanding conditions. The hydraulic flow requirement is 20–60 L/min at 210 bar, with a maximum of 250 bar.The vane compressor impresses with its consistent flow rate, low maintenance requirements and robust design – making it ideal as a mobile, hydraulically driven compressed air source for flexible use on construction sites.KW Hydraulik – your partner for reliable compressed air solutions using vane technology.Effective flow rate: 1,300 L/min at 6 bar (87 PSI), max. 8 bar (116 PSI) Oil flow rate: 20–60 L/min at 210 bar (max. 250 bar)Automatic speed controlCoolerOil tankAutomatic pressure reliefSolenoid-operated control valve for off-load valve 

HKL1300 (low pressure) – Hydraulic vane compressor with a flow rate of 1,300 L/min at 8 bar from Dynaset The HKL1300 low-pressure vane compressor from Dynaset delivers a constant flow rate of 1,300 L/min at 6 bar and achieves a maximum pressure of 8 bar (116 PSI). As a compact, hydraulically driven compressed air solution, it is specifically designed for applications requiring a reliable air supply at medium pressure – for example, on construction sites, in municipal vehicles or on mobile machinery. Thanks to automatic speed control, an integrated cooler, an oil reservoir, automatic pressure relief and a solenoid control valve for the off-load valve, the compressor is ideally suited to continuous operation under varying load conditions. The hydraulic demand is 23–66 L/min at 170 bar, up to a maximum of 250 bar – meaning it can be flexibly integrated into a wide variety of systems. The vane compressor stands out for its high efficiency, ease of maintenance and durability – an ideal solution for attachments in the construction, agricultural and municipal sectors. KW Hydraulik – your partner for compact compressed air systems with hydraulic drive. Effective flow rate: 1,300 L/min at 6 bar (87 PSI), max. 8 bar (116 PSI) Oil flow rate: 23–66 L/min at 170 bar (max. 250 bar)Automatic speed control Cooler Oil reservoir Automatic pressure relief Solenoid-operated control valve for off-load valve 

HKL1800 – Hydraulic vane compressor with a flow rate of 1,800 L/min at 8 bar from DynasetThe HKL1800 vane compressor from Dynaset delivers an effective flow rate of 1,800 L/min at 6 bar and achieves a maximum pressure of 8 bar (116 PSI). Thanks to its hydraulic drive and compact design, it is ideally suited for installation on excavators, construction machinery and municipal vehicles.Equipped with automatic speed control, a cooler, an oil reservoir, automatic pressure relief and a solenoid control valve for the off-load valve, the HKL1800 is ideally suited for continuous mobile operation under varying load conditions. The hydraulic flow requirement is 23–66 L/min at 210 bar, with a maximum operating pressure of 250 bar.The robust vane compressor impresses with its consistent air delivery, low-maintenance design and reliable performance – ideal for attachments in the construction, agricultural and municipal sectors.KW Hydraulik – your specialist for mobile compressed air solutions using vane technology.Effective flow rate: 1,800 L/min at 6 bar (87 PSI), max. 8 bar (116 PSI) Oil flow rate: 23–66 L/min at 210 bar (max. 250 bar)Automatic speed controlCoolerOil tankAutomatic pressure reliefSolenoid control valve for off-load valve 

HKL2600 – High-performance vane compressor with a flow rate of 2,600 L/min at 8 bar from DynasetThe HKL2600 vane compressor from Dynaset delivers a compressed air flow rate of 2,600 L/min at 6 bar and achieves a maximum pressure of 8 bar (116 PSI). Its robust construction and hydraulic drive make it the ideal choice for mobile use on construction machinery, excavators and municipal vehicles.Features include a high-performance cooler, an integrated oil reservoir, automatic pressure relief and a solenoid control valve for the off-load valve, ensuring efficient and safe operation. The hydraulic flow requirement is 33–65 L/min at 210 bar, with a maximum operating pressure of up to 250 bar.The vane compressor is particularly suitable for mobile applications where a compact design, consistent compressed air output and reliability are required – such as on attachments for construction, agricultural and municipal machinery.KW Hydraulik – your solution for powerful, hydraulically driven vane compressors.Effective flow rate: 2,600 L/min at 6 bar (87 PSI), max. 8 bar (116 PSI) Oil flow rate: 33–65 L/min at 210 bar (max. 250 bar)CoolerOil tankAutomatic pressure reliefSolenoid-operated control valve for off-load valve 

HKL2600 (low pressure) – Hydraulic vane compressor with a flow rate of 2,600 L/min at 8 bar from DynasetThe HKL2600 low-pressure vane compressor from Dynaset delivers an effective air flow of 2,600 L/min at 6 bar and achieves a maximum pressure of 8 bar (116 PSI). Thanks to its hydraulic drive and compact design, the compressor is ideally suited for installation in construction and municipal vehicles as well as mobile machinery.Features include a high-performance cooler, an integrated oil reservoir, automatic pressure relief and a solenoid control valve for the off-load valve – ensuring safe and efficient operation even under continuous load. The hydraulic flow requirement is 41–82 L/min at 170 bar, with a maximum system pressure of 250 bar.As a reliable source of compressed air, this vane compressor is the ideal choice for attachments in the construction, agricultural and municipal machinery sectors.KW Hydraulik – your partner for mobile low-pressure compressor systems with hydraulic drive.Effective flow rate: 2,600 L/min at 6 bar (87 PSI), max. 8 bar (116 PSI) Oil flow rate: 41–82 L/min at 170 bar (max. 250 bar)CoolerOil reservoirAutomatic pressure reliefSolenoid-operated control valve for off-load valve 

HKL400 – Compact vane compressor with a capacity of 400 L/min at 8 bar from DynasetThe HKL400 from Dynaset is a compact, hydraulically driven vane compressor that delivers an effective compressed air output of 400 L/min at 6 bar and reaches a maximum pressure of 8 bar (116 PSI). Low-pressure variants are available as an option, starting from a system pressure of 170 bar. Thanks to its space-saving design, the compressor is ideally suited for smaller construction machinery, municipal vehicles and mobile service units.Thanks to automatic speed control, an integrated cooler, an oil reservoir and automatic pressure relief, the HKL400 ensures a reliable supply of compressed air even under varying operating conditions. The hydraulic requirement is 10–35 L/min at 120 bar, with a maximum system pressure of 250 bar.This vane compressor is particularly suitable for applications with limited installation space where a stable air supply is nevertheless required – e.g. on attachments for construction, agricultural and municipal machinery.KW Hydraulik – your solution for compact compressed air systems in mobile applications.Effective flow rate: 400 L/min at 6 bar (87 PSI), max. 8 bar (116 PSI) Oil flow rate: 10–35 L/min at 120 bar (max. 250 bar)(Low-pressure models available up to 170 bar) Automatic speed controlCoolerOil reservoirAutomatic pressure relief

HKL4100 – Hydraulic vane compressor with a flow rate of 4,100 L/min at 8 bar from DynasetThe HKL4100 vane compressor from Dynaset delivers an impressive compressed air output of 4,100 L/min at 6 bar and achieves a maximum pressure of 8 bar (116 PSI). Thanks to its powerful hydraulic drive, the compressor is ideally suited to high-volume applications on construction machinery, specialised vehicles and mobile work platforms.Standard equipment includes a high-performance cooler, an integrated oil tank, an automatic pressure relief system and a solenoid control valve for the off-load valve, which ensures high efficiency with minimal energy loss. The hydraulic flow requirement is 74–135 L/min at 210 bar, with a maximum operating pressure of 250 bar.The vane compressor impresses with its consistent air output, robust construction and maintenance-friendly design – ideal for attachments on construction, agricultural and municipal machinery.KW Hydraulik – your solution for maximum compressed air performance in mobile applications.Effective flow rate: 4,100 L/min at 6 bar (87 PSI), max. 8 bar (116 PSI) Oil flow rate: 74–135 L/min at 210 bar (max. 250 bar)CoolerOil reservoirAutomatic pressure reliefSolenoid-operated control valve for off-load valve 

HKL5000 – Hydraulic vane compressor with a flow rate of 5,000 L/min at 8 bar from DynasetThe HKL5000 vane compressor from Dynaset is a high-performance compressed air system designed for mobile use in demanding conditions. With a flow rate of 5,000 L/min at 6 bar and a maximum pressure of 8 bar (116 PSI), it is perfectly suited to high-performance applications on construction sites, heavy-duty vehicles and hydraulically operated machinery.The unit features an efficient cooler, an integrated oil reservoir, automatic pressure relief and a solenoid control valve for the off-load valve, ensuring efficient and safe operation even under varying conditions. The hydraulic flow requirement is 74–135 L/min at 210 bar, with a maximum working pressure of up to 250 bar.Ideally suited for attachments in the construction, agricultural and municipal sectors where high air volumes and reliable performance are required.KW Hydraulik – your system partner for high-performance compressed air technology featuring vane technology.Effective flow rate: 5,000 L/min at 6 bar (87 PSI), max. 8 bar (116 PSI) Oil flow rate: 74–135 L/min at 210 bar (max. 250 bar) CoolerOil tankAutomatic pressure reliefSolenoid-operated control valve for off-load valve 

HKL7500 – High-performance vane compressor with a flow rate of 7,500 L/min at 8 bar from DynasetThe HKL7500 from Dynaset is a hydraulically driven high-performance vane compressor with an effective flow rate of 7,500 L/min at 6 bar and a maximum pressure of 8 bar (116 PSI). It has been designed for particularly air-intensive applications on construction machinery, utility vehicles or mobile industrial units.Thanks to a high-performance cooler, an integrated oil reservoir, automatic pressure relief and a solenoid control valve for the off-load valve, the HKL7500 ensures safe and efficient operation even under continuous load. The hydraulic demand is 90–150 L/min at 260 bar, with a maximum system pressure of 280 bar – ideal for machines with high hydraulic flow rates.This compressor is the ideal choice for attachments on construction, agricultural and municipal machinery where high air volumes, a compact design and mobile flexibility are required.KW Hydraulik – your first choice for high-performance mobile compressor systems.Effective flow rate: 7,500 L/min at 6 bar (87 PSI), max. 8 bar (116 PSI) Oil flow rate: 90–150 L/min at 260 bar (max. 280 bar)CoolerOil tankAutomatic pressure reliefSolenoid-operated control valve for off-load valve 

HKR11000 - Hydraulic screw compressor with a delivery rate of 11,000 l/min from Dynaset The HKR11000 is a powerful, hydraulically driven screw compressor for the highest compressed air requirements in mobile applications. With an effective delivery rate of 11,000 l/min at 6 bar and a maximum pressure of 10 bar (145 PSI), this compressor delivers constant compressed air - ideal for use in construction and municipal machinery as well as commercial vehicles with high performance requirements. Thanks to automatic speed control, integrated air pressure control with pressure relief and pressure gauge for pressure monitoring, the HKR11000 offers maximum control with consistently high efficiency. With a hydraulic requirement of 184 l/min at 345 bar (nominal) and a working range of 115-190 l/min at up to 380 bar, it is designed for extreme conditions. Typical areas of application are Attachments for construction, agricultural and municipal machinery as well as hydraulics for commercial vehicles up to 7.5 tonnes. KW Hydraulik - your solution for maximum compressed air performance in mobile applications. Effective flow rate: 11,000 l/min at 6 bar (87 PSI), max. 10 bar (145 PSI) Oil volume: 115-190 L/min at max. 380 barNominal: 184 L/min at 345 barAutomatic speed controlAir pressure control with pressure reliefPressure gauge

HKR11000 - Hydraulic screw compressor with 11,000 l/min delivery rate from Dynaset The HKR11000 screw compressor from Dynaset is the ideal solution for mobile applications with high compressed air requirements. With an effective flow rate of 11,000 L/min at 6 bar and a maximum pressure of 10 bar (145 PSI), it delivers reliable performance under the toughest conditions. Equipped with automatic speed control, integrated air pressure control with pressure relief and pressure gauge, the HKR11000 offers maximum efficiency and control during operation. The hydraulic power requirement is nominally 270 l/min at 230 bar, with a working range of 165-275 l/min at up to 380 bar - ideal for power-intensive applications. Typical applications can be found in the following areas Attachments for construction, agricultural and municipal machinery as well as hydraulics for commercial vehicles up to 7.5 tonnes. KW Hydraulik - your partner for mobile high-performance compressed air systems with hydraulic drive. Effective flow rate: 11,000 l/min at 6 bar (87 PSI), max. 10 bar (145 PSI) Oil volume: 165-275 L/min at max. 380 barNominal: 270 L/min at 230 barAutomatic speed controlAir pressure control with pressure reliefPressure gauge

HKR1300 - Compact screw compressor with 1,300 L/min compressed air output from Dynaset The HKR1300 is a powerful, hydraulically driven screw compressor with an effective delivery rate of 1,300 l/min at 6 bar and a maximum pressure of 10 bar (145 PSI). It is ideal for mobile compressed air applications where continuous supply, efficiency and compact design are required. With automatic speed control, integrated air pressure control with pressure relief and pressure gauge, the HKR1300 offers a high degree of operational reliability and performance control. The hydraulic output range is 27-40 l/min up to max. 230 bar, nominally 37 l/min at 205 bar - ideal for flexible installation in vehicles or machines. Typical areas of application are Attachments for construction, agricultural and municipal machinery as well as hydraulic systems for commercial vehicles up to 7.5 tonnes. KW Hydraulik - your address for mobile compressed air solutions with system. Effective flow rate: 1,300 l/min at 6 bar (87 PSI), max. 10 bar (145 PSI) Oil volume: 27-40 L/min at max. 230 barNominal: 37 L/min at 205 barAutomatic speed control Air pressure control with pressure relief Pressure gauge

HKR2000 - Hydraulic screw compressor with 2,000 l/min compressed air output from Dynaset The HKR2000 screw compressor is the ideal solution for continuous mobile use where a constant supply of compressed air and high efficiency are required. With an effective delivery rate of 2,000 L/min at 6 bar and a maximum pressure of 10 bar (145 PSI), it is ideally suited for professional applications in construction, industry and municipal technology. Equipped with automatic speed control, an integrated air pressure control with pressure relief and a pressure gauge, the HKR2000 guarantees safe and powerful operation under changing load conditions. The hydraulic power range is 30-55 l/min at 230 bar, nominally 53 l/min at 205 bar - ideal for machines with medium to high power requirements. Typical areas of application: Attachments for construction, agricultural and municipal machinery as well as hydraulic solutions for commercial vehicles up to 7.5 tonnes. KW Hydraulik - Your specialist for powerful, hydraulically operated compressed air systems. Effective flow rate: 2,000 l/min at 6 bar (87 PSI), max. 10 bar (145 PSI) Oil volume: 30-55 L/min at 230 barNominal: 53 L/min at 205 barAutomatic speed controlAir pressure control with pressure reliefPressure gauge

HKR2000 - Compact screw compressor with 2,000 l/min at up to 13 bar from Dynaset The HKR2000 is a powerful, hydraulically driven screw compressor specially designed for mobile use under high loads. With an effective compressed air output of 2,000 l/min at 6 bar and a maximum pressure of 13 bar (189 PSI), it is ideal for tools and applications with increased pressure requirements - for example in civil engineering, on municipal vehicles or in mobile maintenance. Equipped with automatic speed control, air pressure control with pressure relief and an integrated pressure gauge, the HKR2000 ensures safe and efficient operation. The hydraulic power requirement is 30-68 l/min at 210 bar, nominally 53 l/min at 210 bar - ideal for vehicles and machines with medium to high hydraulic potential. Typical areas of application are Attachments for construction, agricultural and municipal machinery and hydraulic solutions for commercial vehicles up to 7.5 tonnes. KW Hydraulik - your expert for mobile screw compressors with a high power reserve. Effective flow rate: 2,000 l/min at 6 bar (87 PSI), max. 13 bar (145 PSI) Oil volume: 30-68 L/min at 210 barNominal: 53 L/min at 210 barAutomatic speed controlAir pressure control with pressure reliefPressure gauge

HKR2500 - Hydraulic screw compressor with 2,500 L/min air output from Dynaset The HKR2500 screw compressor delivers a constant compressed air supply of 2,500 l/min at 6 bar and reaches a maximum pressure of 10 bar (145 PSI) - ideal for mobile applications with high air requirements. Whether on construction sites, in municipal vehicles or in mobile workshops: The HKR2500 impresses with its compact design, high efficiency and reliable performance. The automatic speed control, the integrated air pressure control with pressure relief and the integrated pressure gauge ensure optimum control and operational safety. The hydraulic output range is 35-80 l/min at 230 bar, nominally 67 l/min at 205 bar - perfectly matched for machines with medium to high hydraulic pressure. Typical areas of application: Attachments for construction, agricultural and municipal machinery and hydraulic systems for commercial vehicles up to 7.5 tonnes KW Hydraulik - Your partner for mobile high-performance compressed air systems. Effective flow rate: 2,500 l/min at 6 bar (87 PSI), max. 10 bar (145 PSI) Oil volume: 35-80 L/min at 230 barNominal: 67 L/min at 205 barAutomatic speed controlAir pressure control with pressure reliefPressure gauge

HKR4000 - Hydraulically driven screw compressor with 4,000 l/min air output from Dynaset The HKR4000 screw compressor has been specially developed for continuous mobile use under high loads. With an effective delivery rate of 4,000 L/min at 6 bar and a maximum pressure of 10 bar (145 PSI), it offers a reliable compressed air supply for power-intensive tools and machines - e.g. in the construction industry, on municipal vehicles or in mobile maintenance applications. The automatic speed control, an air pressure control with pressure relief and the integrated pressure gauge ensure maximum operational safety and efficient power control. The hydraulic power requirement is 55-105 l/min at 230 bar, nominally 104 l/min at 215 bar - ideal for powerful hydraulic systems. Typical areas of application: Attachments for construction, agricultural and municipal machinery as well as hydraulic solutions for commercial vehicles up to 7.5 tonnes KW Hydraulik - your system partner for powerful, mobile compressed air technology. Effective flow rate: 4,000 l/min at 6 bar (87 PSI), max. 10 bar (145 PSI)Oil volume: 55-105 L/min at 230 barNominal: 104 L/min at 215 barAutomatic speed controlAir pressure control with pressure reliefPressure gauge

HKR4000 - High-pressure screw compressor with 4,000 l/min and up to 13 bar from Dynaset The HKR4000 is a powerful, hydraulically driven screw compressor specially designed for mobile applications with high air and pressure requirements. With a delivery rate of 4,000 l/min at 6 bar and a maximum pressure of 13 bar (189 PSI), this compressor is the perfect solution for demanding tasks in the construction industry, on municipal vehicles or on mobile service machines. Thanks to automatic speed control, integrated air pressure control with pressure relief and a pressure gauge, the HKR4000 offers maximum operational reliability, efficient control and a long service life. The hydraulic output range is 55-125 l/min at up to 230 bar, nominally 125 l/min at 220 bar - ideal for powerful hydraulic systems. Typical areas of application: Attachments for construction, agricultural and municipal machinery as well as hydraulics for commercial vehicles up to 7.5 tonnes KW Hydraulik - your partner for mobile compressed air technology with high performance and system expertise. Effective flow rate: 4,000 l/min at 6 bar (87 PSI), max. 13 bar (189 PSI)Oil volume: 55-125 L/min at max. 230 barNominal: 125 L/min at 220 barAutomatic speed controlAir pressure control with pressure reliefPressure gauge

HKR500 - Compact screw compressor with 500 L/min compressed air output from Dynaset The HKR500 screw compressor is the ideal choice for applications with limited installation space and moderate air requirements. With an effective flow rate of 500 L/min at 6 bar and a maximum pressure of 10 bar (145 PSI), it offers a reliable compressed air supply for tools and machines in mobile use - for example on commercial vehicles, in municipal vehicles or on small construction machines. Equipped with automatic speed control, integrated air pressure control with pressure relief and a pressure gauge, the HKR500 ensures efficient and controlled operation. The hydraulic power requirement is 19-30 l/min at up to 230 bar, nominally 29 l/min at 123 bar - ideal for smaller hydraulic systems with precise compressed air requirements. Typical fields of application: Attachments for construction, agricultural and municipal machinery and hydraulics for commercial vehicles up to 7.5 tonnes KW Hydraulik - your address for compact, powerful screw compressors with hydraulic drive. Effective flow rate: 500 l/min at 6 bar (87 PSI), max. 10 bar (145 PSI) Oil volume: 19-30 L/min at max. 230 barNominal: 29 L/min at 123 barAutomatic speed controlAir pressure control with pressure reliefPressure gauge

HKR5000 - High-performance screw compressor with 5,000 l/min compressed air supply from Dynaset The HKR5000 screw compressor is the ideal solution for mobile applications with high air requirements and long operating times. With an effective delivery rate of 5,000 L/min at 6 bar and a maximum pressure of 10 bar (145 PSI), this model impresses with its efficiency, robustness and continuous compressed air supply - ideal for applications in construction, utility vehicles or the municipal sector. The automatic speed control, integrated air pressure control with pressure relief and pressure gauge ensure a stable and safe working environment. The hydraulic output range is 60-140 l/min at 230 bar, nominally 137 l/min at 210 bar - perfect for machines with high hydraulic output. Typical areas of application: Attachments for construction, agricultural and municipal machinery as well as hydraulic solutions for commercial vehicles up to 7.5 tonnes KW Hydraulik - your system provider for powerful, mobile compressed air solutions. Effective flow rate: 5,000 l/min at 6 bar (87 PSI), max. 10 bar (145 PSI) Oil volume: 60-140 L/min at 230 barNominal: 137 L/min at 210 barAutomatic speed controlAir pressure control with pressure reliefPressure gauge