BETE

The BE-AHP700 hydraulic pump from our PROFI-LINE is the ideal solution for mobile hydraulic applications in industry, maintenance and on construction sites. With a powerful 18V electric motor and two exchangeable batteries, the hydraulic pump works completely independently and guarantees a reliable pressure supply for single-acting tools. The operating pressure of 200 to 700 bar ensures a wide range of applications, while control is via a radio remote control or cable remote control. The robust design and automatic pressure cut-off guarantee safe and efficient use in demanding working environments. Thanks to the rotatable hydraulic connection (CEJN 115 series), the pump can be easily integrated into existing work processes.This battery-powered hydraulic unit is ideal for mobile use thanks to its light weight and the supplied carrying strap Pressure switch-off when the maximum pressure is reached Thermal fuse to protect against overheating Charge status controlRotatable hydraulic connection (CEJN 115 series)Scope of delivery:- BE-AHP700 battery-powered hydraulic pump - Hand-held remote control and radio remote control - MAKITA exchangeable battery 18V / 5Ah, 2 pieces- MAKITA chargerAs a manufacturer of hydraulic power units and tools and a partner of numerous international brands of hydraulic tools, KW HYDRAULIK GmbH has the expertise and capacity to maintain and repair hydraulic equipment.All-round service in Germany by KW HYDRAULIK GMBHConsultancy - Repair - Maintenance - Spare parts

The BE-AHP850 hydraulic pump from our PROFI-LINE is the ideal solution for mobile hydraulic applications in industry, maintenance and on construction sites. With a powerful 18V electric motor and two exchangeable batteries, the hydraulic pump works completely independently and guarantees a reliable pressure supply for single-acting tools. The operating pressure of 850 bar ensures a wide range of applications, while control is via a radio remote control or cable remote control. The robust design and automatic pressure cut-off guarantee safe and efficient use in demanding working environments. Thanks to the rotatable hydraulic connection (CEJN 115 series), the pump can be easily integrated into existing work processes.This battery-powered hydraulic unit is ideal for mobile use thanks to its light weight and the supplied carrying strap Pressure switch-off when the maximum pressure is reached Thermal fuse to protect against overheating Charge status controlRotatable hydraulic connection (CEJN 115 series)Scope of delivery:- BE-AHP850 battery-powered hydraulic pump - Hand-held remote control and radio remote control - MAKITA exchangeable battery 18V / 5Ah, 2 pieces- MAKITA chargerService by KW HYDRAULIK GMBHAs a manufacturer of hydraulic power units and tools and partner of numerous international brands of hydraulic tools, KW HYDRAULIK GmbH has the expertise and capacity to maintain and repair hydraulic equipment.KW HYDRAULIK can provide you with the best advice on the use of and accessories for hydraulic equipment.All-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

Maximum performance for tight working areasThe BE-EK12042 cordless hydraulic cable press from our ECO-LINE combines powerful 120 kN pressing performance with a pistol design. This tool has a fast feed in the low-pressure range, which enables a faster work cycle. The compact, rotatable and open crimping head with an opening width of 42 mm enables the crimping of H-branch terminals.Thanks to its compatibility with KLAUKE series 13 and DUBUIS inserts, copper cable lugs up to 400 mm² and aluminium up to 300 mm² can be processed efficiently. The impact-resistant housing with two-component handle ensures maximum ease of use and durability. The automatic pressure cut-off guarantees a consistently high quality of the crimping point.Powered by a powerful 18V lithium-ion battery from MAKITA, the BE-EK12042-M18V is supplied in an extremely hard-wearing case - including battery and charger, scope of delivery without crimping dies.Pressing tool for "130-C" series pressing inserts, compatible with the "KLAUKE Series 13", "DUBUIS C130" series insertsGun mouldCompact, rotatable, open press head with an opening width of 42 mmCrimping force 120 kN, enables crimping of:max. 300 mm² copper cable lugs to DIN 46235max. 400 mm² copper cable lugs in accordance with VDEmax. 300 mm² aluminium18 volt lithium-ion battery and charger from MAKITAImpact-resistant housing with two-component handle for perfect handlingSupplied in an extremely hard-wearing caseAutomatic switch-off after reaching the maximum pressure (pressure relief valve)USB interface for data readoutScope of delivery:Battery-powered hydraulic cable press, incl. one battery, charger and case without insertsAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

Maximum performance for tight working areasThe BE-EK25020 cordless hydraulic cable crimper from our ECO-LINE combines powerful 250 kN crimping performance with an ergonomic gun design. The powerful and rotatable crimping head enables precise and safe crimping.Thanks to its compatibility with PFISTERER size III, KLAUKE series 25 and DUBUIS inserts, copper cable lugs up to 630 mm² and aluminium up to 500 mm² can be processed efficiently. The impact-resistant housing with two-component handle ensures maximum ease of use and durability. The automatic pressure cut-off guarantees a consistently high quality of the crimping point.Powered by a powerful 18V lithium-ion battery from MAKITA, the BE-EK25020 is supplied in an extremely hard-wearing case - including battery and charger, scope of delivery without crimping dies.Pressing tool for "D60" series pressing inserts, compatible with "PFISTERER size III", "KLAUKE series 25", "DUBUIS 250" series insertsGun shapeRotatable, closed press headPressing force 250 kN, enables pressing of:max. 625/630 mm² copper cable lugs to DIN 46235max. 500 mm² aluminium18 volt lithium-ion battery and charger from MAKITAImpact-resistant housing with two-component handle for perfect handlingSupplied in an extremely hard-wearing caseAutomatic switch-off after reaching the maximum pressure (pressure relief valve)Scope of delivery:Battery-powered hydraulic cable press, incl. one battery, charger and case without insertsAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

Sheet metal hole punching attachment with 3/8" UNF thread compatible with ALFRA, GREENLEE and HÄWA sheet metal punchers.All-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

The BE-ES105C-M18V from KW Hydraulik 's ECO-LINE is a powerful cordless hydraulic cable cutter for precise and powerful cutting of copper and aluminium cables up to Ø 105 mm. The open cutting head can be rotated and enables flexible working even in tight spaces.Thanks to the piston force of 200 kN and the robust two-stage hydraulics, the cable is quickly approached and cut - for maximum time savings during use. An integrated LED light ensures optimum visibility of the cutting area, even in poor lighting conditions. The shears are powered by an 18 V lithium-ion battery from MAKITA and come in an impact-resistant plastic housing including a very sturdy transport case - ideal for the construction site, mesh construction or workshop.Whether for mains installation, overhead line construction or power distribution - the BE-ES105C-M18V impresses with its power, mobility and easy handling.Rotating cutting head, open shears18 volt lithium-ion battery from MAKITAPiston force 200 kN, for copper and aluminium cablesIntegrated LED light to illuminate the work areaVery robust plastic housing, impact-resistant Two-stage hydraulics enable fast feed for starting the cableVery sturdy transport caseAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

The BE-ES120C-M18V from KW Hydraulik 's ECO-LINE is a powerful cordless hydraulic cable cutter for precise and powerful cutting of copper and aluminium cables up to Ø 120 mm. The open cutting head can be rotated and enables flexible working even in tight spaces.Thanks to the piston force of 200 kN and the robust two-stage hydraulics, the cable is quickly approached and cut - for maximum time savings during use. An integrated LED light ensures optimum visibility of the cutting area, even in poor lighting conditions. The shears are powered by an 18 V lithium-ion battery from MAKITA and come in an impact-resistant plastic housing including a very sturdy transport case - ideal for the construction site, mesh construction or workshop.Whether for mains installation, overhead line construction or power distribution - the BE-ES120C-M18V impresses with its power, mobility and easy handling.Rotating cutting head, open shears18 volt lithium-ion battery from MAKITAPiston force 200 kN, for copper and aluminium cablesIntegrated LED light to illuminate the work areaVery robust plastic housing, impact-resistant Two-stage hydraulics enable fast feed for starting the cableVery sturdy transport caseAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

The BE-ES30MC-M18V from KW Hydraulik 's ECO-LINE is a compact cordless hydraulic cable cutter for precise and powerful cutting of copper and aluminium cables up to Ø 30 mm. The open cutting head can be rotated and enables flexible working even in tight spaces.Thanks to the piston force of 60 kN and the robust hydraulics, the cable is quickly approached and cut. An integrated LED light ensures optimum visibility of the cutting area, even in poor lighting conditions. The shears are powered by an 18 V lithium-ion battery from MAKITA and come in an impact-resistant plastic housing including a very sturdy transport case - ideal for construction sites, netting work or workshops.Whether for mains installation, overhead line construction or power distribution - the BE-ES30MC-M18V impresses with its power, mobility and easy handling.Rotating cutting head, open shears18 volt lithium-ion battery from MAKITAPiston force 60 kN, for copper and aluminium cables and aluminium-steel ropes (ACSR)Integrated LED light to illuminate the work areaVery robust plastic housing, impact-resistant Very sturdy transport caseAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

The BE-ESG105-M18V from KW Hydraulik 's ECO-LINE is a versatile cordless hydraulic cable cutter for reliable cutting of copper and aluminium cables with light steel armouring. With a maximum cutting capacity of Ø 105 mm, the device is ideal for power cable construction. The rotating guillotine cutting head and the cutting force of 120 kN enable precise and powerful cuts - even with light steel-reinforced conductors. A two-stage hydraulic system ensures fast feed, while the integrated LED light provides optimum illumination of the work area. The BE-ESG105-M18V is powered by an 18V lithium-ion battery from MAKITA, while the impact-resistant housing reliably protects the tool in daily use. The sturdy transport case supplied makes the cable cutter mobile and safe to stow away.Comparable tools depending on application requirements:BE-SDG105 - hydraulic cutting headWhether on the construction site or for maintenance work - the BE-ESG105-M18V offers power, precision and flexibility for professional applications.Rotating cutting head, guillotine18 volt lithium-ion battery from MAKITACutting force 120 kNIntegrated LED light to illuminate the work areaVery robust plastic housing, impact-resistant Two-stage hydraulics enable fast feed for starting the cableVery sturdy transport caseAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

The BE-ESG85-M18V from KW Hydraulik 's ECO-LINE is a versatile cordless hydraulic cable cutter for reliable cutting of copper and aluminium cables with light steel armouring. With a maximum cutting capacity of Ø 85 mm, the device is ideal for power cable construction. The rotating guillotine cutting head and the cutting force of 60 kN enable precise and powerful cuts - even with light steel-reinforced conductors. A two-stage hydraulic system ensures fast feed, while the integrated LED light provides optimum illumination of the work area. The BE-ESG85-M18V is powered by an 18V lithium-ion battery from MAKITA, while the impact-resistant housing reliably protects the tool in daily use. The sturdy transport case supplied makes the cable cutter mobile and safe to stow away.Comparable tools depending on application requirements:S85G - Hydraulic cutting headHS85G - Hand-held hydraulic cable cutterBE-SDG85 - Hydraulic cutting headBCP085G - Battery-powered hydraulic cutting head for cables up to Ø 85 mmWhether on the construction site or for maintenance work - the BE-ESG85-M18V offers power, precision and flexibility for professional applications.Rotating cutting head, guillotine18 volt lithium-ion battery from MAKITACutting force 60 kNIntegrated LED light to illuminate the work areaVery robust plastic housing, impact-resistant Two-stage hydraulics enable fast feed for starting the cableVery sturdy transport caseAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

Maximum performanceThe BE-HSG55AC is a robust hand-held hydraulic cable cutter for precise cutting of overhead lines and steel-reinforced aluminium and copper cables up to Ø 55 mm.The BE-HSG55AC is supplied in a sturdy case, perfect for mobile use in the energy supply sector, industry or network construction.Rotatable cutting head, guillotine Suitable for steel-reinforced cables, aluminium-steel cables (ACSR) and CU or AL cablesCutting force 120 kN Two-stage hydraulics enable fast feed for starting the cable Carrying bagService by KW HYDRAULIK GMBHAll-round service in Germany!Repair - Maintenance - Spare parts

Bolt size M12 to M16Hexagon size SW19 to SW24Operating pressure 700 barHydraulic nut splitter (MSP), single-acting with spring returnCompact ergonomic designeasy handlingunique angled head for use even on flat surfacesfast spring returnhigh-performance blade can be resharpenedthis nut splitter is supplied in an aluminium case with an additional spare bladeCapacity: 68 kN (7 tonnes)Operating pressure: 700 barWeight: 1.7 kgUp to bolt strength class 8.8; harder nuts lead to increased wearReplaces our PADIMA MSP1924All-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

Hydraulic cable shears for CU and AL cables up to Ø 120 mmThe BE-SDK120 is a powerful hydraulic cable cutter, ideal for cutting copper and aluminium cables with light steel armouring.With a cutting force of 120 kN at 700 bar and special blade grinding, it offers reliable cutting performance.For cutting CU and aluminium cables with light steel armouring,Cutting force 120 kN at 700 BARService by KW HydraulikAll-round service in Germany!Repair - Maintenance - Spare parts

The cone cutter SET for XLPE cables - 50-300 mm² consists of high-quality special tools for conically chamfering the stepped conductor insulation layer on XLPE-insulated medium-voltage cables. The precise conical cut ensures a stress-resistant transition between the insulation and cable accessories - a critical step for standard-compliant installation in electrical power distribution. Processing takes place in three structured work steps: Processing the extruded conductive layer with a suitable peeling device Cutting the insulation to size with a suitable sheath cutter Conical chamfering of the insulation with the cone cutter precisely matched to the cable cross-section These cone cutters have been specially developed for cables with a conductor cross-section of 50-300 mm² and ensure an even, smooth cone surface - ideal for voltage-optimised installation of joints and terminations. The tool is robust, easy to use and delivers reproducible results, even under demanding conditions on the construction site. Available from KW Hydraulik - your partner for professional XLPE cable tools and safe installation in the medium-voltage network. At a glance:KS cutting tools for conical chamfering of the stepped conductor insulation layer.Processing the conductor layer with a peeling toolCut insulation to size with sheath cutterPeel the insulation with a suitable cone cutter

The KBE-EMS54-M18V is a battery-powered mechanical cable cutter that has been specially developed for cutting fine-stranded copper cables with a diameter of up to 54 mm. Whether in the energy supply sector, municipal utilities, telecommunications companies or their service providers - this cutter always delivers a particularly clean cut thanks to its circular cutting action.With a cutting force of 25 kN and a weight of just 2.6 kg (including battery), it is not only powerful, but also handy and easy to handle. The robust design allows reliable use even under demanding conditions.The safety switch lever ensures controlled and safe working, while the powerful battery enables up to 70 cuts per charge - ideal for daily use on site.Cuts cables up to Ø 54 mm in the field of energy supply companies, municipal utilities and their service providers, telecommunications, etc.Particularly good cutting pattern due to circular cutApprox. 70 cuts with one battery chargeSafe working thanks to the safety switch leverRobust design allows use even under the toughest conditionsCutting diameter: up to 54 mmCutting force: 25 kNWeight: 2.6 kg (incl. battery)Drive: mechanicalScope of delivery: KBE-ESM54-M18V incl. one MAKITA 18V/5Ah Li-Ion battery, charger and transport caseAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

The sheath cutter for insulated overhead cables up to Ø 38 mm is a versatile special tool for the safe and clean removal of insulation from sheathed overhead cables in the range from 12.5 to 38 mm cable diameter, 50-300 mm³ conductor cross-section. The tool enables stripping at the cable end as well as targeted removal in the centre of the cable.Designed for efficient and precise manual stripping of the insulation layer of cables.The self-adjusting clamp fits cables from 50-300 mm² and enables smooth stripping.The precise screw mechanism ensures easy manual operation.The high-strength alloy blade remains sharp and durable.Adjustable blade depth for different insulation thicknesses.This precision tool is the ideal solution for network operators, energy suppliers and installation teams in the field of electrical power distribution.Available from KW Hydraulik - your partner for professional tools for all aspects of overhead line technology.Product facts:Easily cuts XLPE - outer sheath and layer sheath. The blade is designed for cutting wall thicknesses of up to 15 mm. Two feed angles and a zero position for the blade can be set. Precise and straight cutting of the jacket is guaranteed. Working range for XLPE single-core cables from 35 mm² 10 KV, up to 500 mm² 30 KV, between 15 and 54 mm cable diameter. The shape of the blade lifts the sheath at the cut point and thus prevents damage to the structural elements. A cutting depth of approx. 70 % is perfectly adequate.► Two functions in one device:► Stripping the outer sheath and stripping the insulation!

The KGE-EHP-DE-230V-750W model from our PROFI-Line is a powerful and compact hydraulic power pack for double-acting tools. The two-stage hydraulics deliver 6 l/min at low pressure and 0.4 l/min at high pressure (700 bar).The 6 litre oil tank ensures sufficient cooling.A solenoid valve enables direct control of the connected tools. With compact dimensions of 440 x 260 x H520 mm and a weight of 32 kg, the unit is ideal for confined installation spaces or mobile applications. This hydraulic pump is the ideal choice for anyone who needs a compact, low-maintenance and efficient hydraulic system. Hydraulic pump with 230 volt electric motorCEJN series 115 quick couplings (male & female)750 kW motorDelivery rate: LP: 8 l/min / HP: 0.6 l/min, max. 700 BARTwo solenoid valves6 litre hydraulic tankDimensions: 440x260xH520 mmWeight: 32 kgAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

Power for confined working areasThe BE-EK354M battery-powered hydraulic cable crimper from our PROFI-LINE combines 35 kN crimping power with an ergonomic bar design that has been specially developed for confined spaces such as control cabinet construction. The compact, rotatable and closed crimping head with hinged lock enables precise and secure crimping even in hard-to-reach areas.Thanks to its compatibility with KLAUKE series 4 and DUBUIS inserts, copper cable lugs up to 120 mm² and aluminium up to 150 mm² can be processed efficiently. The impact-resistant housing ensures maximum ease of use and a long service life. The automatic pressure cut-off guarantees a consistently high quality of the crimping point.Powered by a powerful 18V lithium-ion battery from MAKITA, the BE-EK354M is supplied in a hard-wearing case - including battery and charger, scope of delivery without crimping dies.Crimping tool for "35" series crimping dies, compatible with the "KLAUKE Series 4" and "DUBUIS 35" diesRod shape, enables use in confined spaces such as in switch cabinet constructionCompact, rotatable, closed press head with hinged closure for pressing in confined areasCrimping force 35 kN, enables crimping of:max. 120 mm² copper cable lugs to DIN 46235max. 150 mm² aluminium18 volt lithium-ion battery and charger from MAKITAImpact-resistant housing with two-component handle for perfect handlingSupplied in a hard-wearing caseAutomatic switch-off after reaching the maximum pressure (pressure relief valve)Scope of delivery:Cordless hydraulic cable press, incl. one battery, charger and case, without insertsAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

Maximum performance for tight working areasThe KBE-EK6022 cordless hydraulic cable press from our PROFI-LINE combines powerful 60 kN pressing performance with a pistol design. This tool has a fast feed in the low-pressure range, which enables a faster work cycle. The compact, rotatable and closed crimping head with hinged closure enables precise and safe crimping even in hard-to-reach areas.Thanks to its compatibility with KLAUKE series 22 and DUBUIS inserts, copper cable lugs up to 300 mm² and aluminium up to 300 mm² can be processed efficiently. The impact-resistant housing with two-component handle ensures maximum ease of use and durability. The automatic pressure cut-off guarantees a consistently high quality of the crimping point.Powered by a powerful 18V lithium-ion battery from MAKITA, the KBE-EK6022 is supplied in an extremely hard-wearing case - including battery and charger, scope of delivery without crimping dies.Pressing tool for "60-CK" series pressing inserts, compatible with the "KLAUKE Series 22", "DUBUIS D62" series insertsGun mouldCompact, rotatable, closed crimping head with hinged closure for crimping in tight spacesCrimping force 60 kN, enables crimping of:max. 300 mm² copper cable lugs to DIN 46235max. 300 mm² aluminium18 volt lithium-ion battery and charger from MAKITAImpact-resistant housing with two-component handle for perfect handlingSupplied in an extremely hard-wearing caseAutomatic switch-off after reaching the maximum pressure (pressure relief valve)USB interface for data readoutScope of delivery:Battery-powered hydraulic cable press, incl. one battery, charger and case without insertsService by KW HYDRAULIK GMBHAs a manufacturer of hydraulic power units and tools and partner of numerous international brands of hydraulic tools, KW HYDRAULIK GmbH has the expertise and capacity to maintain and repair hydraulic equipment. KW HYDRAULIK can provide you with the best advice on the use of and accessories for hydraulic equipment.All-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

Maximum performance for confined working areasThe KBE-EKM6022 cordless hydraulic cable press from our PROFI-LINE combines powerful 60 kN crimping performance with an ergonomic bar design that has been specially developed for confined spaces such as switch cabinet construction. The compact, rotatable and closed crimping head with hinged lock enables precise and secure crimping even in hard-to-reach areas.Thanks to its compatibility with KLAUKE series 22 and DUBUIS inserts, copper cable lugs up to 300 mm² and aluminium up to 300 mm² can be processed efficiently. The impact-resistant housing with two-component handle ensures maximum ease of use and durability. The automatic pressure cut-off guarantees a consistently high quality of the crimping point.Powered by a powerful 18V lithium-ion battery from MAKITA, the KBE-EKM6022 is supplied in an extremely hard-wearing case - including battery and charger, scope of delivery without crimping dies.Pressing tool for "60-CK" series pressing inserts, compatible with the "KLAUKE Series 22", "DUBUIS D62" series insertsRod shape, enables use in confined spaces such as in switch cabinet constructionCompact, rotatable, closed crimping head with hinged closure for crimping in confined areasCrimping force 60 kN, enables crimping of:max. 300 mm² copper cable lugs to DIN 46235max. 300 mm² aluminium18 volt lithium-ion battery and charger from MAKITAImpact-resistant housing with two-component handle for perfect handlingSupplied in an extremely hard-wearing caseAutomatic switch-off after reaching the maximum pressure (pressure relief valve)USB interface for data readoutScope of delivery:Battery-powered hydraulic cable press, incl. one battery, charger and case without insertsAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

Maximum performance for confined working areasThe KBE-EK6022C cordless hydraulic cable crimping press from our PROFI-LINE combines powerful 60 kN crimping performance with an ergonomic rod design and the newly developed open crimping head, which was specially developed for confined spaces such as control cabinet construction. The compact, rotatable and open crimping head enables precise and safe crimping even in areas that are difficult to access.Thanks to its compatibility with KLAUKE series 22 and DUBUIS inserts, copper cable lugs up to 300 mm² and aluminium up to 300 mm² can be processed efficiently. The impact-resistant housing with two-component handle ensures maximum ease of use and durability. The automatic pressure cut-off guarantees a consistently high quality of the crimping point.Powered by a powerful 18V lithium-ion battery from MAKITA, the BE-EK6022M is supplied in an extremely hard-wearing case - including battery and charger, scope of delivery without crimping dies.Crimping tool for "60-CK" series crimping dies, compatible with "KLAUKE Series 22" and "DUBUIS D62" diesRod shape, enables use in confined spaces such as in switch cabinet constructionCompact, rotatable, open press head for pressing in confined areasCrimping force 60 kN, enables crimping of:max. 300 mm² copper cable lugs to DIN 46235max. 300 mm² aluminium18 volt lithium-ion battery and charger from MAKITAImpact-resistant housing with two-component handle for perfect handlingSupplied in an extremely hard-wearing caseAutomatic switch-off after reaching the maximum pressure (pressure relief valve)USB interface for data readoutScope of delivery:Battery-powered hydraulic cable press, incl. one battery, charger and case without insertsAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

One tool for three applicationsThe KBE-EK60UNVM-M18V cordless hydraulic universal tool from our PROFI-LINE combines powerful 60 kN pressing performance with an ergonomic bar design that has been specially developed for confined spaces such as switch cabinet construction. The compact and rotatable tool attachments enable precise and safe handling even in hard-to-reach areas.Thanks to its compatibility with KLAUKE series 22 and DUBUIS inserts, copper cable lugs up to 300 mm² and aluminium up to 300 mm² can be processed efficiently. The impact-resistant housing with two-component handle ensures maximum ease of use and durability. The automatic pressure cut-off guarantees a consistently high quality of the crimping point.Powered by a powerful 18V lithium-ion battery from MAKITA, the BE-EK60UNVM is supplied in an extremely hard-wearing case - including battery and charger, scope of delivery without crimping dies.Crimping tool for crimping dies series "60-CK", compatible with dies from the "KLAUKE series 22", "DUBUIS D62" seriesCutting insert for cables up to Ø 40 mmoptionally available:Sheet metal hole punch attachment with 3/8" UNF thread compatible with ALFRA, GREENLEE and HÄWA sheet metal hole punches.Rod shape, enables use in confined spaces such as in switch cabinet constructionCompact, rotatable, closed press head with hinged closure for pressing in confined areasCrimping force 60 kN, enables crimping of:max. 300 mm² copper cable lugs to DIN 46235max. 300 mm² aluminium18 volt lithium-ion battery and charger from MAKITAImpact-resistant housing with two-component handle for perfect handlingSupplied in an extremely hard-wearing caseAutomatic switch-off after reaching the maximum pressure (pressure relief valve)USB interface for data readoutScope of delivery:Cordless hydraulic universal tool, incl. one 18V/5Ah MAKITA battery, charger and casePress head attachment without press insertsCutting insert for up to Ø40mmAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

The KBE-ESG55AC-M18V from KW Hydraulik 's PROFI-LINE is a versatile cordless hydraulic cable cutter for reliable cutting of copper and aluminium cables as well as steel-reinforced aluminium-steel cables (ACSR). With a maximum cutting capacity of Ø 55 mm, the device is ideal for network and overhead line construction. The rotating guillotine cutting head and the cutting force of 120 kN enable precise and powerful cuts - even on steel-reinforced conductors. A two-stage hydraulic system ensures fast feed, while the integrated LED light provides optimum illumination of the work area. The BE-ESG55AC-M18V is powered by an 18V lithium-ion battery from MAKITA, while the impact-resistant housing reliably protects the tool in daily use. The sturdy transport case supplied makes the cable cutter mobile and safe to stow away.Comparable tools depending on application requirements:S40G - Hydraulic cutting head for stationary applicationsHS40G-ACSR - Hand-held hydraulic cutting head for ACSRS45G-ACSR - Stationary guillotine for larger ACSR linesHS45G-ACSR - Hand hydraulic for steel-reinforced aluminium cablesBCP040G - Battery-powered hydraulic cutting head for ACSR up to Ø 40 mmWhether on the construction site, in overhead line construction or for maintenance work - the BE-ESG55-M18V offers power, precision and flexibility for professional applications.Rotating cutting head, guillotine18 volt lithium-ion battery from MAKITACutting force 120 kN, cutting blade sharpening for steel-reinforced cablesIntegrated LED light to illuminate the work areaVery robust plastic housing, impact-resistant Two-stage hydraulics enable fast feed for starting the cableVery sturdy transport caseAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

Maximum performance for tight working areasThe BE-HK12042 manual hydraulic cable crimper from our PROFI-LINE combines powerful 120 kN crimping performance with an ergonomic design. The compact, rotatable and open crimping head with an opening width of 42 mm enables precise and safe crimping even in areas that are difficult to access.H-clamps can be processed.Thanks to compatibility with KLAUKE series 13 and DUBUIS inserts, copper cable lugs up to 400 mm² and aluminium up to 300 mm² can be processed efficiently. The automatic pressure cut-off ensures a consistently high quality of the crimping point.Scope of delivery without crimping dies.Crimping tool for "130-C" series crimping dies, compatible with "KLAUKE Series 13" and "DUBUIS C130" diesCompact, rotatable, open press head with an opening width of 42 mm.Crimping force 120 kN, enables crimping of:max. 300 mm² copper cable lugs to DIN 46235max. 400 mm² copper cable lugs to VDEmax. 300 mm² aluminiumSupplied in a hard-wearing caseAutomatic switch-off after reaching the maximum pressure (pressure relief valve)Scope of delivery:Hand-held hydraulic cable press, in case, without insertsService by KW HYDRAULIK GMBHAll-round service in Germany!Repair - Maintenance - Spare parts