Tools for recycling and demolition

CP version: Concrete pulveriser, for secondary demolitionOpening: 1420 mmMouth depth: 1240 mmCrushing force: -- tonCutting force: -- tonBlade length: -- mmHydraulic systemCylinder oil consumption: 455-680 l/min. Cylinder pressure: 310-380 bar Rotation - oil consumption: 30-38 L/min. Rotation - pressure: 138-172 bar Excavator weight: > 85 tonnesIntegrated quick-action valve for shorter cycle times and maximum productivityNot included in the scope of delivery. (extra charge)

Bucket volume: 0.58 m³Weight: 2830 kgOil requirement: 130-140 litres/min.Pressure: 300 barDimensions:A: 900 mm bucket width B: 2050 mm C: 1330 mmD: 700 mmE: 500 mm

AV28 - Hydraulically driven high-performance blower with 2,000 m³/h air volume from DOA The AV28 blower from DOAis a compact but powerful hydraulically driven air conveying system for applications with high air flow rates. With a volume flow of 2,000 m³/h and an air outlet diameter of 200 mm, the device is ideal for ventilation, extraction or suction in mobile and stationary applications - for example in construction, tunnels, on municipal vehicles or in industrial processes. The hydraulic requirement is 20-40 l/min at 140 bar, which makes the AV28 versatile for connection to existing machines and systems. With its compact dimensions of 70 × 60 × 50 cm and a weight of just 25 kg, the blower is easy to integrate and can also be used flexibly on the move. Typical applications: Ventilation of enclosed spaces or trenches Dust extraction during construction work Support for drying or cooling KW Hydraulik - your system supplier for powerful blower technology with hydraulic drive. Compressed air volume flow: 2,000 m³/hAir outlet: D=200 mmHydraulic requirements: 20-40 l/min at 140 barDimensions: 70x60x50 cmWeight: 25 kg

The BCP20R from STANLEY-DUBUIS is a powerful, battery-operated steel cutter developed for the precise cutting of round steel and high-strength material up to Ø 20 mm. With its robust guillotine cutting mechanism and high cutting force, the BCP20R is perfect for use in the construction industry, net installation or industrial steel construction. The rotatable cutting head ensures maximum flexibility even in confined spaces, while the integrated two-stage hydraulic system enables rapid feed to the material and significantly shortens the cutting time. The 18V lithium-ion battery from DEWALT ensures cordless use and delivers reliable performance even under the toughest conditions. The impact-resistant plastic housing reliably protects the device, while the sturdy transport case included in the scope of delivery guarantees safe transport and tidiness on the construction site. Whether cutting earthing rods, structural steel or reinforcement - the BCP20R offers the power, mobility and precision that professionals expect in daily use.

CC230 - Hand-held demolition tongs with 230 mm opening The CC230 is a compact, powerful hand-held dem olition clamp for professional use in concrete demolition. With an opening width of 230 mm and a force of up to 196 kN, it is ideal for the precise breaking of reinforced concrete in confined spaces. Thanks to its low weight of just 23 kg, it can be operated by one person - perfect for controlled demolition work indoors or in hard-to-reach areas. The tongs are coupled to a hydraulic unit with a double-acting connection and 700 bar working pressure. With an opening of 170 mm, it achieves a pointing force of 98 kN. The robust design enables the crushing of concrete walls up to 20 cm thick (at 325 N/mm²). The tips can be exchanged for even greater efficiency in use. Typical applications can be found in recycling and demolition, particularly in renovation, separation work or selective dismantling - more information on this under Tools for recycling and demolition. The CC230 is part of our range of concrete crushers and pulverisers and comes from the quality manufacturer Edilgrappa. You can find other hand-held models on the Hand-held demolition grapples overview page. For connection to a hydraulic unit for double-acting tools with 700 bar working pressure. Opening width: 230 mmForce: 196 kN (98 kN at the tip with 170 mm opening)Maximum wall thickness- 20 cm concrete at 325 N/mm² strengthDimensions: 810x510x220 mmWeight: 23 kgInterchangeable tips

CC315 - Hand-held demolition tongs for massive concrete demolition The CC315 is a particularly powerful hand-held demolition clamp for two-man operation, developed for the controlled crushing of concrete structures up to 30 cm wall thickness (at 325 N/mm² strength). With an impressive force of 294 kN - 133 kN at the tip with 170 mm opening - it is ideal for demanding demolition work in building construction, renovation or industrial demolition. The tongs have an opening width of 315 mm and are connected to a hydraulic unit for double-acting tools with 700 bar working pressure. For ergonomic handling with a weight of 52 kg, we recommend suspending the device from a balancer. The compact dimensions (740×860×180 mm) ensure stability combined with good manoeuvrability on the construction site. Special feature of the CC315: The short tips supplied close to 87 mm. Optional long tips allow the pliers to close completely - ideal for particularly fine cutting work. All tips are interchangeable, allowing easy maintenance and adaptation to changing applications. The CC315 is part of the Concrete Crusher & Pulveriser product category and can be viewed on our hand-held demolition pliers page. The model comes from the reliable manufacturer Edilgrappa - quality "Made in Italy". You can find out more about the areas of application for these tongs under Tools for recycling and demolition. Product information:For connection to a hydraulic unit for double-acting tools with 700 bar working pressure.We recommend suspending the tool from a balancer for better handling.Opening width: 315 mmForce: 294 kN (133 kN at the tip with 170 mm opening)Maximum wall thickness- 30 cm concrete at 325 N/mm² strength Dimensions: 740x860x180 mmWeight: 52 kgThe supplied short tips retract to 87 mm.The pliers close when the long tips are used. (Order separately)Interchangeable tips

CC270 - Compact demolition clamp for precise breaking and cutting up to 270 mm The CC270 from Edilgrappa is a robust demolition clamp for mini-excavators from 1 to 3 tonnes, specially developed for the controlled demolition of concrete walls and masonry up to 270 mm thick. With its high demolition force of 226 kN at the tip and a cutting force of 690 kN, it is ideal for fast, clean and quiet demolition work in sensitive environments. The integrated cutting edge (16 mm) makes it possible to cut through rebar and metal components, while the mechanical 360° rotator offers maximum manoeuvrability directly on site. With a hydraulic input of 36 l/min at max. 200 bar, the CC270 is efficient in operation and particularly adaptable. Thanks to its compact design (738×570×220 mm) and a weight of just 90 kg, it is the ideal solution for use on small excavators on tight construction sites. The CC270 is listed under demolition grapples for mini excavators up to 5 tonnes and belongs to the superordinate category of concrete crushers & pulverisers. Other typical applications can be found under Tools for recycling and demolition. Demolition tongs for fast, quiet and clean demolition work:Breaks concrete walls from 50 to 270 mmCuts rebar and other metal components; cutting edge length 16 mmDemolition force: 226 kN at the tip Cutting force: 690 kNThe concrete crusher has an integrated mechanical rotator with 360° angle of rotation.Hydraulic input: 36 l/min. at max. 200 barFor excavators from 1 to 3 tonnesDimensions: 738x570x220 mmWeight: 90 kg

CC300 - Hand-held demolition clamp for dust-free, low-vibration dismantling The CC300 is a particularly versatile and compact hand-held demolition clamp designed for precise demolition work in sensitive conditions. Thanks to its one-man operation and intuitive control via a rotary handle, it enables efficient work in confined spaces - even where larger machines have no access. The CC300 is the ideal solution for all situations in which vibrations, noise or dust generation must be avoided at all costs. Whether in technically sensitive areas, on listed buildings or in disaster relief operations: these pliers combine maximum control with high demolition performance - and all this with the simplest handling. They demolish reinforced concrete structures, brick and stone walls, slabs, columns, stairs and balconies up to a thickness of 250 mm (R=325 kg/cm²)with incredible ease and precision. Application: Simple operation via a rotary handle, one-man operation possible. Demolition work where the integrity of the structures must be maintained while avoiding dangerous vibrations (historic buildings, luxury flats, dilapidated structures). Wherever it is important to intervene quickly and cleanly without creating dust (hospitals, data centres, production facilities). Demolition with maximum noise protection at all times of the day (offices, schools, administrative centres, condominiums). Where the use of larger and heavier machines is not possible for reasons of space and transport. For example, on the upper floors of buildings, on lifting platforms, in confined spaces such as basements. Disaster relief (USAR = Urban Search and Rescue), where you need to help victims trapped under rubble due to earthquakes, floods and explosions caused by gas leaks. The CC300 is listed under Concrete Crusher & Pulveriser and is part of KW Hydraulik's range of hand-held demolition tools. Manufactured by Edilgrappa, it stands for maximum reliability, mobility and precision in demolition. Further information on the areas of application can be found under Tools for recycling and demolition. Product information:They demolish reinforced concrete structures, brick and stone walls, slabs, columns, stairs and balconies up to a thickness of 250 mm (R=325kg/cm²) with incredible ease and precision.Application:Simple operation via a rotary handle, one-man operation possible Demolition work where the integrity of the structures must be maintained while avoiding dangerous vibrations (historic buildings, luxury flats, dilapidated structures)Wherever it is important to intervene quickly and cleanly without creating dust (hospitals, data centres, production facilities)Demolition with maximum noise protection at all times of day (offices, schools, administrative centres, condominiums)Where the use of larger and heavier machines is not possible for reasons of space and transport. For example, on the upper floors of buildings, on lifting platforms, in confined spaces such as basements.Disaster relief (USAR = Urban Search and Rescue), where you need to help victims trapped under rubble due to earthquakes, floods and explosions caused by gas leaks.

CC430 - Demolition clamp with variable force transmission up to 430 mm wall thickness The CC430 from Edilgrappa is a powerful add-on demolition grapple for mini excavators from 1.5 to 5 tonnes, designed for the quiet and clean breaking of concrete walls and masonry up to 430 mm. Thanks to variable pivot points on the arms, the force transmission can be adjusted to suit the application - ideal for different material thicknesses and structural conditions. The tongs break concrete walls from 31 to 430 mm and cut reinforcing bars and metal components with a cutting edge length of up to 28 mm. In position A it achieves a demolition force of 335 kN, in position B 317 kN - in each case directly at the tip. The integrated mechanical 360° rotator offers full manoeuvrability in the tightest of spaces. With a hydraulic input of 150 l/min at max. 200 bar, compact dimensions of 750×730×330 mm and a weight of 183 kg, the CC430 is ideal for precise demolition work with high performance. The model is listed under Demolition grabs for mini-excavators up to 5 tonnes in the Concrete crusher & pulveriser category. Additional application examples can be found under Tools for recycling and demolition. Demolition tongs for fast, quiet and clean demolition work.Breaks concrete walls from 31 to 430 mmCuts rebar and other metal components; cutting length 28 mmThe arms of these demolition tongs can be fixed in different positions. Thanks to the different pivot points, a very wide range of applications can be broken with optimum force transmission.Demolition force in position:- Position A: 335 kN at the tip- Position B: 317 kN at the tipThe concrete crusher has an integrated mechanical rotator with a 360° angle of rotation.Hydraulic input: 150 l/min. at max. 200 barFor excavators from 1.5 to 5 tonnesDimensions: 750x730x330mmWeight: 183 kg

CC430 - High-pressure reinforced demolition grapple for concrete up to 435 mm The CC430 is a powerful demolition grapple from Edilgrappa for mini-excavators from 3 to 5 tonnes - designed for particularly demanding demolition work. The integrated pressure booster increases the operating pressure to 500 bar, resulting in a demolition force of 440 kN at the tip and a cutting force of 1,400 kN. This means that even solid concrete walls up to 435 mm thick and reinforcing bars up to 30 mm can be processed efficiently and in a controlled manner. Thanks to the mechanical 360° rotator, flexible use in confined spaces is possible. The replaceable tips increase the durability and ease of maintenance of the tongs. With a hydraulic input of 100 l/min at 200 bar, compact dimensions (862×883×323 mm) and a weight of 241 kg, the CC430 offers an ideal combination of performance, precision and ease of use. This model belongs to the category of mounted demolition grabs for mini-excavators up to 5 tonnes and is part of the KW Hydraulik range of concrete crushers & pulverisers. You can find out more about the possible applications under Tools for recycling and demolition. Demolition grapple for fast, quiet and clean demolition work.Breaks concrete walls from 31 to 435 mmCuts reinforcing bars and other metal components; cutting length 30 mmDemolition force: 440 kN at the tip Cutting force: 1400 kNThe concrete crusher has an integrated mechanical rotator with 360° angle of rotation.Hydraulic input: 100 l/min. at max. 200 barThe built-in pressure booster increases the pressure to 500 bar.For excavators from 3 to 5 tonnesInterchangeable tipsDimensions: 862x883x323 mmmWeight: 241 kg

Weight: 380-3588 kgExcavator weight: 1-50 tonnesHydraulics: 60-110 L/min at 300 bar to 350-450 L/min at 350 barForce at the outer tip (F1): 26-102 tonnesForce in the centre (F3): 80-347 TonLength (A): 1070-2491 mmOpening width (B): 420-1204 mmWidth (D): 320-600 mmWidth (E): 195-480 mmRobustness: Highly reinforced HARDOX structureProtection: Complete protection of the cylinder rod by inverted cylinderSpeed: Exclusive rapid valve to reduce cycle time (CF200-CF350)Productivity: Large gripper opening and width for more shredded material per cycleForce: Oversized cylinder for high clamping forceRuntime: Reversible blades, HARDOX wear plate and replaceable teeth on site Reliability: Oversized pins that are well protected against accidental impacts

The CMG-PRO10kW from Dynaset is an efficient magnet generator for direct mounting on the magnet, especially for demanding lifting and sorting applications. With an output of 10 kW, it supplies an operating voltage of 220 VDC for solenoid coils with a resistance of 5.4-100 ohms. The integrated demagnetisation in just 0.8 s ensures fast work cycles. Thanks to innovative pressure accumulator technology, a leakage oil connection is no longer required - the generator can withstand up to 50 bar back pressure on the tank line. Typical applications can be found in construction, municipal and recycling machines as well as in mobile magnet systems. Further solutions of this type can be found under Dynaset power generators. Hydraulics: 44-69 l/min (max. internally limited) at max. 350 barGenerator output: 10 kWMax solenoid coil power: 1.0- 9.1 kWDemagnetisation: 0.8 sSolenoid coil resistance (20C°): 5.4-100 OhmOperating voltage: 220 VDCAuxiliary current: OptionalNEW! The new CMG generation from Dynaset is equipped with a pressure accumulator that enables 50 bar back pressure in the tank line instead of the 5 bar of the previous models. Therefore, no leakage line is required.

The CMG-PRO15kW from Dynaset is a powerful solenoid generator for direct mounting on the solenoid. It delivers up to 15 kW of power at an operating voltage of 220 VDC - ideal for demanding solenoid applications with coil resistances between 3.6 and 50 ohms. Thanks to fast demagnetisation in just 0.8 seconds, the generator enables efficient and rapid work cycles. The new CMG generation is equipped with an integrated pressure accumulator and can withstand back pressure of up to 50 bar - eliminating the need for a leakage oil connection. Ideal for attachments on construction, municipal and recycling machines. Further generator solutions from Dynaset can be found in the Dynaset power generator overview. Hydraulics: 68-102 L/min (max. internally limited) at max. 260 barGenerator output: 15 kWMax solenoid coil power: 14.5 kWDemagnetisation: 0.8 sSolenoid coil resistance (20C°): 3.6 - 50 OhmOperating voltage: 220 VDCAuxiliary current: OptionalNEW! The new CMG generation from Dynaset is equipped with a pressure accumulator that allows 50 bar back pressure in the tank line instead of the 5 bar of the previous models. Therefore, no leakage line is required.

The CMG-PRO20kW from Dynaset is a robust magnet generator for direct mounting on the magnet that delivers up to 20 kW of power at 220 VDC operating voltage. With a maximum solenoid coil output of 19.5 kW and a coil resistance of 2.6-50 ohms, it is ideal for demanding lifting and sorting applications. Particularly efficient: The demagnetisation time of just 0.8 seconds significantly shortens work cycles. The new CMG series has an integrated pressure accumulator that allows a back pressure of up to 50 bar - meaning that a leakage oil connection is no longer required. Ideal for use with attachments for construction, municipal or recycling machines. Further variants and suitable generator solutions can be found under Dynaset power generators. Hydraulics: 94 l/min (max. internally limited) at 210 barGenerator output: 20 kW Max solenoid coil power: 19.5 kWDemagnetisation: 0.8sSolenoid coil resistance (20C°): 2.6 - 50 OhmOperating voltage: 220 VDCAuxiliary current: OptionalNEW! The new CMG generation from Dynaset is equipped with a pressure accumulator that allows 50 bar back pressure in the tank line instead of the 5 bar of the previous models. Therefore, no leakage line is required.

The CMG-PRO30kW from Dynaset is a powerful magnet generator for direct mounting on the magnet, developed for the toughest industrial applications. With a generator output of 30 kW at 220 VDC and a maximum solenoid coil output of 29.5 kW, this model is suitable for large solenoid applications, for example in the scrap and recycling industry. Thanks to a demagnetisation time of just 0.8 seconds, the generator works quickly and efficiently. The current CMG generation is equipped with an integrated pressure accumulator that allows up to 50 bar back pressure in the return line - a leakage oil line is no longer required. Ideal for use with attachments for construction and municipal machinery. Further generator variants can be found under Dynaset power generators. Hydraulics: 122 l/min (max. internally limited) at 210 barGenerator output: 30 kWMax solenoid coil output: 29.5 kWDemagnetisation: 0.8sSolenoid coil resistance (20C°): 1.8-100 OhmOperating voltage: 220 VDCAuxiliary current: OptionalNEW! The new CMG generation from Dynaset is equipped with a pressure accumulator that enables 50 bar back pressure in the tank line instead of the 5 bar of the previous models. Therefore, no leakage line is required.

The CMG-PRO3kW from Dynaset is a compact magnet generator that can be mounted directly on the magnet for applications with low power requirements. With a generator output of 3 kW at 220 VDC and a solenoid coil output of 0.5 to 3 kW, this model is ideal for smaller lifting magnets or precise separation tasks in industry and recycling. Demagnetisation takes place in just 0.8 seconds. The new generation is equipped with an integrated pressure accumulator that allows back pressure of up to 50 bar - a leakage oil line is not required. Perfectly suited for attachments in construction and municipal technology. Discover more Dynaset power generators in our range. Hydraulics: 21-31 l/min (max. internally limited) at max. 350 bar Generator output: 3 kWMax solenoid coil output: 0.5 - 3 kWDemagnetisation: 0.8 sSolenoid coil resistance (20C°): 15-100 OhmOperating voltage: 220 VDCAuxiliary current: OptionalNEW! The new CMG generation from Dynaset is equipped with a pressure accumulator that enables 50 bar back pressure in the tank line instead of the 5 bar of the previous models. Therefore, no leakage line is required.

The CMG-PRO40kW from Dynaset is the most powerful model in the new CMG series for direct mounting on the magnet. With a generator output of 40 kW and a maximum solenoid coil output of 39.5 kW, it is ideal for demanding lifting and sorting tasks in the scrap, construction and recycling sectors. Thanks to fast demagnetisation (0.8 s) and 220 VDC operating voltage, the system works reliably and efficiently. The new CMG generation is equipped with a pressure accumulator that allows a back pressure of up to 50 bar - a leakage oil line is not required. Ideal for use on attachments for construction, agricultural and municipal machinery. Further variants can be found in the overview of Dynaset solenoid generators. Hydraulics: 167 l/min (max. internally limited) at 210 barGenerator output: 40 kWMax solenoid coil output: 39.5 kWDemagnetisation: 0.8sSolenoid coil resistance (20C°): 1.3 - 100 OhmOperating voltage: 220 VDCAuxiliary current: OptionalNEW! The new CMG generation from Dynaset is equipped with a pressure accumulator that enables 50 bar back pressure in the tank line instead of the 5 bar of the previous models. Therefore, no leakage line is required.

The CMG-PRO6kW from Dynaset is a compact and efficient hydraulic generator for direct solenoid mounting, ideal for light to medium applications in scrap handling or material handling. With a generator output of 6 kW and a maximum solenoid coil output of 5.5 kW, it delivers reliable performance in a compact design. Thanks to fast demagnetisation in just 0.8 seconds and an operating voltage of 220 VDC, it is ideal for demanding load changes. The new CMG generation does not require a leakage oil line - made possible by an integrated pressure accumulator with back pressure of up to 50 bar. Ready for use with attachments for construction, agricultural and municipal machinery. Further sizes and variants can be found in the overview of Dynaset magnet generators. Hydraulics: 3248 l/min (max. internally limited) at max. 350 barGenerator output: 6 kWMax solenoid coil power: 0.5 -5.5 kWDemagnetisation: 0.8 s Solenoid coil resistance (20C°): 8.8-100 OhmOperating voltage: 220 VDCAuxiliary current: OptionalNEW! The new CMG generation from Dynaset is equipped with a pressure accumulator that enables 50 bar back pressure in the tank line instead of the 5 bar of the previous models. Therefore, no leakage line is required.

Weight: 460-3400 kgExcavator weight: 5-45 tonnesHydraulics: 50-90 L/min at 280 bar to 300-350 L/min at 350 barRotation: 10-12 L/min at 100 bar to 50-60 L/min at 120 barForce at the outer tip (F1): 25-110 TonForce in the centre (F3): 68-380 TonLength (A): 1255-2735 mmOpening width (B): 460-1010 mmWidth (D): 320-490 mmWidth (E): 175-314 mmRobustness: HARDOX-reinforced structure and oversized thrust disc with double ball rotationProtection: Complete protection of the cylinder rod by inverted cylinderSpeed: Exclusive rapid valve to reduce cycle time (CR2000-CR3600)Efficiency: Large grab opening, compactness and manoeuvrability of the attachment; also ideal for demolition work at great heightsPower: Oversized cylinder for high closing forceSafety: Motor protection valve against high pressure peaksService life: Reversible blades, HARDOX wear plates that can be replaced on site and replaceable teethReliability: Oversized pins that are well protected against accidental impacts

HCF Hydraulic centrifugal fanThe DYNASET Hydraulic Centrifugal Blower converts the hydraulic power of a mobile machine, vehicle or container into a high air volume flow for blowing and vacuum applications.The HCF hydraulic centrifugal blower is a powerful, hydraulically driven blower for generating a high air flow for versatile blowing and vacuum applications. Designed for reliability and efficiency, this compact unit is ideal for tasks such as industrial vacuum systems, mobile extraction systems and more. The HCF is a robust and durable solution that is perfect for demanding environments.ApplicationsAir blowers and fansHoovers for industrial purposesHooversExtraction systemsVacuum containersThe dataVolume flow: 3.4 m³/sMax. air vacuum: -8 kPAAir outlet: 220 x 220 mmHydraulic requirements: 90 l/min at 250 barDimensions: 635x738x284 mmWeight: 45 kg

HCF Hydraulic centrifugal fanThe DYNASET Hydraulic Centrifugal Blower converts the hydraulic power of a mobile machine, vehicle or container into a high volume air flow for blowing and vacuum applications.The HCF hydraulic centrifugal blower is a powerful, hydraulically driven blower for generating a high air flow for versatile blowing and vacuum applications. Designed for reliability and efficiency, this compact unit is ideal for tasks such as industrial vacuum systems, mobile extraction systems and more. The HCF is a robust and durable solution that is perfect for demanding environments.ApplicationsAir blowers and fansHoovers for industrial purposesHooversExtraction systemsVacuum containersThe dataVolume flow: 0.8 m³/sMax. air vacuum: -11 kPAAir outlet: 110 x 110 mmHydraulic requirements: 40 l/min at 150 barDimensions: 373x426x206 mmWeight: 19 kg

EPW-E150/15-400AC-UV - Electrically driven high-pressure water pump, 15 l/min at 150 barDynaset EPW electric high-pressure water pump converts electricity into high-pressure water. The range includes both AC and DC powered pumps.The EPW electric high-pressure water pump converts electrical energy into high-pressure water and offers a durable, high-quality solution for various applications. With its robust structure and options for AC and DC powered models, this pump is built to perform reliably even in challenging environments. Whether in industrial, municipal or commercial environments, the EPW pump delivers consistent high-pressure water performance with low maintenance, making it an efficient and durable choice for demanding tasks. Accessories for high-pressure cleaning and dust suppression are available.Technical dataFlow rate: 15 l/min at max. 150 barPower: 3.75 kWSuction height: 0 mPre-pressure in the suction line: 1-3 barWater filter: 80 meshElectrical requirementsPower: 4 kWVoltage: 400 VAC (alternating current)Current: max. 9.4 AMotor speed: 1400 min-1Protection class: IP55Dimensions and weightsDimensions: 510x292x265 mm (LxWxH)Weight: 38 kgThe most important advantages and features of AC pumpsProduces high-pressure water suitable for both high-pressure cleaning and dust controlEasy installation thanks to a compact and lightweight structure; utilises the mains supply without the need for a separate motorA maximum pressure of 150 bar (2200 psi) and a flow rate of 15 litres (3.96 gal) ensure powerful performance.IP55 rating - Designed to resist dust ingress and withstand water jets from all directions, ensuring a long service life in challenging environments.400 volt operation, compatible with standard industrial power systems.Always ready for use with low water consumption and low maintenance.Maximum output power of 3.75 kWModels with automatic start/stop are available and offer more convenience.The most important advantages and features of DC pumpsGenerates high-pressure water for mobile useEasy to install and always ready for use as DC pumps are powered by the battery of a machine or vehicle - no inverter requiredAvailable in a range of power levels from 9.8 kW to 16.7 kWIP65 - dust-tight and protected against heavy water spray from all directions, for durability, reliability and safe useHigh pressure capabilities from 170 bar to 450 bar (2465 psi to 6527 psi), maximum flow rates up to 20-50 l/min (5.3-13.2 gal/min) depending on modelAlways ready for use with low water consumption and low maintenance, saving timeSpace-saving due to compact, lightweight designHow does the electric high-pressure water pump work?The electric high-pressure water pump uses an external power supply (AC) as an energy source to generate high-pressure water.The electric high-pressure water pump is connected to the power supply of the machine, vehicle or ship.An integrated electric motor drives the high-pressure water pump.The pump generates water under high pressure for various applications.

EPW-E150/15-400AC-UV-E - Electrically driven high-pressure water pump, 15 l/min at 150 bar with automatic start/stop functionDynaset EPW electric high-pressure water pump converts electricity into high-pressure water. The range includes both AC and DC-fed pumps.The EPW electric high-pressure water pump converts electrical energy into high-pressure water and offers a durable, high-quality solution for various applications. With its robust structure and options for AC and DC powered models, this pump is built to perform reliably even in challenging environments. Whether in industrial, municipal or commercial environments, the EPW pump delivers consistent high-pressure water performance with low maintenance, making it an efficient and durable choice for demanding tasks. Accessories for high-pressure cleaning and dust suppression are available.Technical dataFlow rate: 15 l/min at max. 150 barPower: 3.75 kWSuction height: 0 mPre-pressure in the suction line: 1-3 barWater filter: 80 meshElectrical requirementsPower: 4 kWVoltage: 400 VAC (alternating current)Current: max. 9.4 AMotor speed: 1400 min-1Protection class: IP55Dimensions and weightsDimensions: 510x292x265 mm (LxWxH)Weight: 38 kgThe most important advantages and features of AC pumpsProduces high-pressure water suitable for both high-pressure cleaning and dust controlEasy installation thanks to a compact and lightweight structure; utilises the mains supply without the need for a separate motorA maximum pressure of 150 bar (2200 psi) and a flow rate of 15 litres (3.96 gal) ensure powerful performance.IP55 rating - Designed to resist dust ingress and withstand water jets from all directions, ensuring a long service life in challenging environments.400 volt operation, compatible with standard industrial power systems.Always ready for use with low water consumption and low maintenance.Maximum output power of 3.75 kWModels with automatic start/stop are available and offer more convenience.The most important advantages and features of DC pumpsGenerates high-pressure water for mobile useEasy to install and always ready for use as DC pumps are powered by the battery of a machine or vehicle - no inverter requiredAvailable in a range of power levels from 9.8 kW to 16.7 kWIP65 - dust-tight and protected against heavy water spray from all directions, for durability, reliability and safe useHigh pressure capabilities from 170 bar to 450 bar (2465 psi to 6527 psi), maximum flow rates up to 20-50 l/min (5.3-13.2 gal/min) depending on modelAlways ready for use with low water consumption and low maintenance, saving timeSpace-saving due to compact, lightweight designHow does the electric high-pressure water pump work?The electric high-pressure water pump uses an external power supply (AC) as an energy source to generate high-pressure water.The electric high-pressure water pump is connected to the power supply of the machine, vehicle or ship.An integrated electric motor drives the high-pressure water pump.The pump generates water under high pressure for various applications.

EPW-DUST high-pressure dust suppression system (accessory) for the electric high-pressure water pump EPW150/15-400AC-UVThe EPW-DUST high-pressure dust suppression system from Dynaset is the most innovative dust control system for electric mobile machines in demolition, street cleaning, quarrying, crushing, recycling, etc. The system generates atomised water mist with its electric water pump to suppress dust and prevent emissions from spreading into the environment.The EPW-DUST high-pressure dust control system generates an atomised water mist to effectively suppress dust and prevent harmful emissions from spreading into the environment. This dust control system is powered by an electric high-pressure water pump, while its hydraulic counterpart, the HPW-DUST high-pressure dust suppression system, utilises hydraulics. As the most advanced dust control system for mobile machinery, it is perfect for applications such as demolition, road cleaning, quarrying, crushing, recycling, mining and material handling. The product range includes both AC and DC powered dust collection systems.Designed for efficiency and minimal water consumption, the system improves air quality and working conditions while reducing time, labour and resource requirements. Thanks to its low water consumption, it prevents your construction site from becoming a muddy field, making it a better solution than conventional dust cannons.Technical data EPW-DUST for EPW150/15EPW-DUST is an add-on kit for EPW150/15Delivery rate: 15 l/min at max. 150 barNozzles: 4Suction height: 0 mPre-pressure in the suction line: 1-3 barWater filter: 80 meshElectrical requirementsPower: 4 kWVoltage: 400 VAC (alternating current)Current: max. 45 AMotor speed: 1400 min-1Protection class: IP55The most important advantages and features of a high-pressure dust control systemGenerates a targeted water mist with extremely small droplet size directly at the dust source for effective suppression.Dust suppression is activated directly from the machine cabin when requiredHigh pressure dust suppression reduces PM10 dust concentration during street cleaning by 82% compared to no dust suppression and 52% compared to low pressure systems (based on a neutral study by Metropolia University of Applied Sciences).Keeps the air cleaner after cleaning and reduces health risks on the road and in the workplace (according to a neutral study by Metropolia University of Applied Sciences).Prevents soiling and does not wet the construction site or road, so that brushing and demolition work can be carried out without excess water.Saves time, space, labour costs and water compared to conventional dust suppression systemsImproves working conditions, e.g. visibility, especially during tunnelling work.Dust suppression nozzles can be mounted on machine attachments for targeted application.Includes a wash gun for pressure cleaning.Equipped with a robust and reliable EPW electric high-pressure water pump.The main advantages and features of dust suppression with AC pumpEasy installation thanks to a compact and lightweight structure; utilises the mains supply without the need for a separate motor.A maximum pressure of 150 bar (2200 psi) and a flow rate of 15 litres (3.96 gal) ensure strong performance.IP55 rating - Designed to resist dust ingress and withstand water jets from all directions, ensuring a long service life in challenging environments.400 volt operation, compatible with standard industrial power systems.Always ready for use with low water consumption and low maintenance.Models with automatic start/stop are available for added convenience.How does the high-pressure dust suppression system work?The high-pressure dust suppression system utilises the electrical system of a machine, vehicle or vessel as a power source to generate a high-pressure water mist for dust suppression.The electric high-pressure water pump is connected to the electrical system of the machine (DC) or to the mains (AC).An integrated electric motor drives the high-pressure water pump, which generates water under high pressure for dust control.The water is delivered to the high-pressure nozzles without nozzles at the optimum pressure level, creating an atomised water mist.The atomised water mist, which consists of tiny water droplets, effectively suppresses dust.