Tools for electrical power distribution

These ES50M-ME18V battery-powered hydraulic cable shears from KW Hydraulik have been developed for cutting copper and aluminium cables - cleanly, quickly and powerfully. With an opening width of 50 mm and a cutting force of 50 kN, the tool is ideal for use in energy and installation technology.The rotating cutting head in open scissor design enables work to be carried out even in hard-to-reach areas. An integrated LED light ensures optimum visibility in the work area - even in poor lighting conditions.The cable shears are powered by a powerful 18 V lithium-ion battery. The robust, impact-resistant plastic housing protects the technology in tough everyday construction site conditions, while the sturdy transport case ensures safe and convenient transport. Whether in network construction, maintenance or on the construction site - these battery-powered hydraulic cable shears are the ideal companion for professionals who value performance and mobility.Rotating cutting head, open shears18 volt lithium-ion batteryCutting force 50 kNIntegrated LED light to illuminate the work areaRobust plastic housing, impact-resistant Very sturdy transport caseAll-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

For Phillips recess Phillips screwsColour coded

The sheet metal punches from KW Hydraulik are the ideal solution for precise, burr-free punching of sheet metal and plastics in areas such as car body construction, switch cabinet production or stainless steel kitchens. The revised cutting geometry reduces the cutting pressure, minimises the effort required and extends the service life of the tool and hydraulic components. Suitable for manual or hydraulic operation - with connection thread M19 (3/4" UNF). The use of a hydraulic tool is recommended for cut-outs from 26×26 mm in ST37. Available sizes: Rectangular and square holes from 22×22 mm to 138×138 mm At a glance:For manual and hydraulic operation.The sheet metal punching system for effortless, fast and burr-free punching of sheet metal and plastics.The newly developed cutting geometry allows you to work with less effort thanks to reduced cutting pressure requirements. Material wear is significantly reduced. The loads on the hydraulic seals are significantly reduced. Connection thread M 19 mm (3/4 "UNF) Please note From 26x26mm for ST37 we recommend the use of hydraulic tools.The friction in the thread of hand-operated perforations (with hexagon head screw) is so strong that the lag screw is worn out after repeated operation. We therefore do not provide any guarantee for the draw bolt.There is no friction with hydraulically actuated tie rods. They are therefore suitable for continuous use.

The ABL2 is a compact and powerful battery-powered hydraulic sheet metal punch for professional applications in car body, switch cabinet or plant construction. The 360° rotatable tool head enables flexible working even in hard-to-reach places. With the proven 18 V Li-Ion MAKITA technology, this tool offers maximum mobility and reliability - even in confined spaces. Compatible with tools from ALFRA, HÄWA and GREENLEE, the ABL2 is perfect for punching sheet steel, stainless steel (VA) and plastic. The robust design enables punching up to the following maximum values: Ø 96 mm in sheet steel (t = 2 mm) Ø 64 mm in sheet steel (t = 3 mm) Ø 64 mm in VA sheet metal (t = 2 mm) Suitable for:Perforator for sheet steel up to Ø 96 mm (POWERsplit)Perforator for stainless steel up to Ø 63.5 mm (POWERsplit VA)Developed for maximum efficiency - whether on the construction site or in the workshop.Discover now at KW Hydraulik. At a glance:360° swivelling headCompatible with ALFRA, HÄWA and GREENLEEFor punching sheet steel, stainless steel and plastic- Ø 96 mm in sheet steel t = 2 mm- Ø 64 mm in sheet steel t = 3 mm- Ø 64 mm in VA sheet metal t = 2 mm18 volt MAKITA Li-Ion battery and MAKITA chargerScope of delivery: - Hole punch ABL2-M18V- Pull axle 19x130 mm - Pull axle 9.5x70 mm - Adapter 19x9.5 mm- Carrying case - MAKITA battery and charger The following tools can be used:- Round hole tools for ST37 / t=2mm: max. D=96 mm- Round hole punching tools for ST37 / t=3mm: max. D=63 mm- Round hole punching tools for VA / t=2mm: max. D=63 mm

The stripping tool for overhead lines (ACSR) is a professional special tool for precise stripping of the aluminium conductor sheath of aluminium-steel cables (AL/ST). It is suitable for use with ACSR cables with a conductor cross-section of 1250-1440 mm² - ideal for installations in the field of electrical power distribution and overhead line construction.The tool works with an adjustable cutting wheel that enables clean and controlled stripping of the outer aluminium wires without damaging the inner steel core. This ensures tension-proof preparation for connectors or terminations - a crucial step in the professional processing of ACSR cables.The tool is equipped with a holder for guide bushes for precise guidance and adaptation to different cable diameters. Guide bushes are available separately and enable optimum centring during the cutting process.The cutting tool offers a robust, practical solution for energy suppliers, network operators and installation teams in high and medium voltage networks.Available from KW Hydraulik - your partner for high-quality tools for working on ACSR overhead lines and high-voltage infrastructure.Tool for removing the aluminium conductor sheath from AL/ST cables.With adjustable cutting wheel for stripping the aluminium wires on AL/ST cables with conductor cross-sections of 1250-1440 mm²Holder for guide bushesPlease order guide bushes separately (not included in the scope of delivery)All-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

The stripping tool for overhead lines (ACSR) is a professional special tool for precise stripping of the aluminium conductor sheath of aluminium-steel cables (AL/ST). It is suitable for use with ACSR cables with a conductor diameter of up to 43 mm - ideal for installations in the field of electrical power distribution and overhead line construction.The tool works with an adjustable cutting wheel that enables the outer aluminium wires to be cut cleanly and in a controlled manner without damaging the inner steel core. This ensures tension-proof preparation for connectors or terminations - a crucial step in the professional processing of ACSR cables.The tool is equipped with a holder for guide bushes for precise guidance and adaptation to different cable diameters. Guide bushes are available separately and enable optimum centring during the cutting process.The cutting tool offers a robust, practical solution for energy suppliers, network operators and installation teams in high and medium voltage networks.Available from KW Hydraulik - your partner for high-quality tools for working on ACSR overhead lines and high-voltage infrastructure.Tool for removing the aluminium conductor sheath from AL/ST cables.With adjustable cutting wheel for stripping the aluminium wires of AL/ST cables up to a maximum conductor diameter of 43 mmHolder for guide bushesPlease order guide bushes separately (not included in the scope of delivery)All-round service in Germany by KW HYDRAULIK GMBHAdvice - Repair - Maintenance - Spare parts

The AH500L-230V hydraulic power pack from ERKO is the ideal power source for stationary use in workshops and production. Equipped with a powerful 230V electric motor (0.75 kW), it reliably supplies power to press heads, cutting heads and power rail processing devices with quick-release couplings.It is conveniently operated using the foot switch supplied, while the 2.5 m long hydraulic hose offers maximum flexibility at the workplace. With a delivery rate of 0.66 l/min, compact dimensions and a weight of just 25 kg, the unit is also suitable for mobile use. The operating range is between -25 °C and +40 °C, ideal for a wide variety of working environments.Made for professionals - The AH500L is the right solution for anyone who demands the highest levels of efficiency and compatibility in the field of conductor rail processing and hydraulic systems.Equipped with 2.5 m hydraulic hose with quick-release couplingwith foot switchCompatible with press heads, cutting heads and other devices with quick-release coupling Voltage: 230V AC / 50 HzMotor power: 0.75 kWDelivery rate: 0.66 L/min.Operating temperature: -25°C to +40°C Dimensions: 336x235x406 mmWeight: 25 kg

This battery-powered hydraulic wire rope cutter from KW Hydraulik has been specially developed for the clean and powerful cutting of flexible wire ropes up to Ø 32 mm. With an impressive cutting force of 176 kN and a guillotine-style cutting head, it effortlessly handles even high-tensile wires up to R = 1700 N/mm². The rotating cutting head ensures maximum flexibility when working - ideal for tight or awkward spaces.The two-stage hydraulic system enables a fast feed for starting the wire and thus noticeably reduces working time. The tool is powered by an 18V lithium-ion battery from MAKITA, which ensures long runtimes and cordless operation. The impact-resistant plastic housing reliably protects the inner workings in tough everyday working conditions.Product features:Rotatable cutting head, guillotine18 volt lithium-ion battery from MAKITA Cutting force 176 kN, cutting blade sharpening for flexible wire ropesFor wires up to R=1700 N/mm²Very robust plastic housing, impact-resistant Two-stage hydraulics enable fast feed for starting the cableSturdy transport caseTechnical dataDiameter: 32 mmCutting force: 176 kN6x7, 6x12 up to Ø 32 mm6x19 FE up to Ø 28 mm 7x19 SE up to Ø 24 mmWeight: 11 kg

Basic model from PANASONICInsulated special version for holding insulating bits from our meter installation programme With this cordless torque screwdriver you can work under voltage (1000 V) in conjunction with our galvanically isolated bits. 21-stage torque range 0.3 - 2.9 Nm, max. 4.4 NmThe electronic cut-off enables extremely precise torque accuracy of the clutch: +/-5%. ¼" hexagon socket2 rechargeable batteries (3.6 V / 1.9 Ah Li-Ion) and 1 charger, charging time approx. 15 min.2-speed gearbox, speed: 200/600 min-1Idle speed (1/2 gear): 200/600 min-1Weight: 0.5 kg

The BCE025G from STANLEY-DUBUIS is a powerful cordless hydraulic cable cutter, specially developed for the safe and clean cutting of aluminium-steel ropes (ACSR) up to Ø 25 mm. With a cutting force of 55 kN and a rotating guillotine cutting head, it guarantees precise cuts - even in tight spaces.Additional visibility is provided by an integrated LED light that illuminates the work area in a targeted manner. The tool is powered by an 18V lithium-ion battery from DEWALT, which offers reliable performance on the construction site.The impact-resistant plastic housing reliably protects the tool from damage, while the sturdy transport case ensures safe and convenient transport - ideal for daily use in network construction, maintenance or wiring work.If you are looking for alternative versions, the BCL025G is a similar battery-powered alternative with the same cutting performance or the HS25G is a hand-hydraulic model for manual use without a battery. The BCE025G cable shears stand for precise cuts, high-quality workmanship and professional performance when every detail counts.Rotating cutting head, guillotine18 volt lithium-ion battery from DEWALTCutting force 55 kNIntegrated LED light to illuminate the work areaVery robust plastic housing, impact-resistantVery sturdy transport case

The BCL025G from STANLEY-DUBUIS is a compact cordless hydraulic cable cutter specially designed for cutting aluminium-steel ropes (ACSR) up to Ø 25 mm. With a cutting force of 55 kN and a rotating guillotine cutting head, it enables clean cuts even in confined working areas.The integrated LED light ensures optimum visibility at the work site - a clear advantage in poor lighting conditions. The tool is powered by a powerful 18 V lithium-ion battery from DEWALT, which ensures reliable runtimes in mobile use. The impact-resistant plastic housing reliably protects the inner workings from external influences. The sturdy transport case supplied provides additional protection and facilitates safe transport to the construction site.As alternatives, STANLEY-DUBUIS offers the BCE025G, a similar battery-powered model with the same cutting range, and the HS25G, a hand-held hydraulic solution for users without battery power. The BCL025G is the perfect choice for professionals in network construction and energy supply who want to combine reliability, mobility and cutting precision in a compact device.Rotating cutting head, guillotine18 volt lithium-ion battery from DEWALTCutting force 55 kNIntegrated LED light to illuminate the work areaVery robust plastic housing, impact-resistantVery sturdy transport case

The BCP040G from STANLEY-DUBUIS is a powerful cordless hydraulic cable cutter developed for the safe cutting of aluminium-steel ropes (ACSR) up to Ø 40 mm.Equipped with a rotating guillotine cutting head and a cutting force of 88 kN, it offers powerful cuts - even with steel-reinforced cables. A special plus is the two-stage hydraulic system, which enables rapid feed when starting up the cable and thus saves time during repeated cuts.The integrated LED light ensures optimum visibility, even in poor lighting conditions. The cutter is powered by an 18V lithium-ion battery from DEWALT, which provides reliable power for mobile use. The impact-resistant plastic housing reliably protects the technology, while the sturdy transport case supplied ensures safe transport. Rotating cutting head, guillotine18 volt lithium-ion battery from DEWALTCutting force up to 55 kN, cutting blade sharpening for steel-reinforced cablesIntegrated LED light to illuminate the work areaVery robust plastic housing, impact-resistantTwo-stage hydraulic system enables fast feed for starting the cableVery sturdy transport caseComparable tools - Which alternative suits your application? BCP045G - Cordless hydraulic cable cutter Ø 45 mm Cutting principle: Guillotine Drive: Battery-powered hydraulic (DEWALT 18V) Max. cutting rangeCutting range: Ø 45 mm Special features: Larger opening width than the BCP040G Ideal for cables with larger diameters Mobile and powerful 🔗 To the product S40G-ACSR - Hydraulic cutting head Ø 40 mm Cutting principle: Guillotine Drive: Stationary - over 700 BAR hydraulic unit Max. Cutting range: Ø 40 mm Special features: Same cutting force as the BCP040G (88 kN) For stationary installation in pressing stations Ideal for series or workbench applications 🔗 To the product HS40G-ACSR - Hand-held hydraulic cable cutter Ø 40 mm Cutting principle: Guillotine Drive: Hand-hydraulic Max. cutting rangeCutting range: Ø 40 mm Special features: Compact and independent of electricity or battery Ideal for mobile applications without charging infrastructure Same high cutting force as BCP040G 🔗 To the product HS45G-ACSR - Hand-held hydraulic cable cutter Ø 45 mm

The BCP045G from STANLEY-DUBUIS is the ideal solution when it comes to powerful and mobile cutting of aluminium-steel ropes (ACSR) - up to a diameter of 45 mm. Equipped with a guillotine cutting mechanism and a cutting force of 88 kN, this cordless cutter also masters robust, steel-reinforced cables reliably and cleanly. The rotating cutting head ensures maximum flexibility - even in difficult spaces. The integrated two-stage hydraulic system enables fast feed to the cable, which noticeably speeds up work processes. An LED light on the head area also ensures optimum visibility in poor lighting conditions. The BCP045G is powered bya powerful 18V lithium-ion battery from DEWALT, making it ideal for off-grid use in the field, during assembly work or in overhead line construction. The impact-resistant plastic housing protects the technology, while the supplied transport case ensures safe and convenient transport.

The BCP055G from STANLEY-DUBUIS is a powerful cordless hydraulic cable cutter developed for cutting aluminium and copper cables up to a diameter of 55 mm. With a cutting force of 43 kN and a guillotine cutting mechanism, it ensures clean, powerful cuts - even with large-volume cables. The rotating cutting head enables flexible handling, especially when working in confined areas. Thanks to the integrated two-stage hydraulics, the feed to the cable is accelerated, which saves time and makes the work flow more efficient. An LED light on the cutting head ensures optimum illumination of the work area - ideal in poor lighting conditions or when working in distribution cabinets. The BCP055G is powered by a reliable 18V lithium-ion battery from DEWALT, which guarantees cordless and powerful work even in mobile applications. The impact-resistant housing reliably protects the tool, while the sturdy transport case supplied ensures tidiness and safety. Whether in mains construction, in the power supply or on the construction site - the BCP055G impresses with its robustness, mobility and cutting precision.As comparison tools, we offer you the HS55G manual hydraulic cable cutter as well as the S55G hydraulic cutting head from STANLEY-DUBUIS.Rotating cutting head, guillotine18 volt lithium-ion battery from DEWALT Cutting force 43 kNIntegrated LED light to illuminate the work areaVery robust plastic housing, impact-resistant Two-stage hydraulics enable fast feed for starting the cableVery sturdy transport case

The BCP065S from STANLEY-DUBUIS is a powerful cordless hydraulic cable cutter with an open scissor mechanism that has been specially designed for efficient cutting of aluminium and copper cables up to Ø 65 mm. With a cutting force of 130 kN at the piston and 60 kN directly between the cutting edges, the BCP065S can handle even large cables effortlessly and cleanly. The open design of the rotating cutting head facilitates positioning and cutting - especially in tight spaces or with awkwardly shaped cables. Thanks to the two-stage hydraulics, the cable is fed quickly and efficiently. An integrated LED light improves visibility of the cutting area - ideal for use in dark environments. The tool is powered by a robust 18V lithium-ion battery from DEWALT, which enables powerful cuts without a mains connection. The impact-resistant plastic housing provides reliable protection against damage, while the very sturdy transport case ensures safety and organisation.The BCP065S is a reliable partner for installers, network fitters and energy suppliers who want to combine power, convenience and mobile flexibility in one cutting tool.Rotating cutting head, open shears18 volt lithium-ion battery from DEWALT Cutting force 130 kN on the piston, 60 kN between the cutting edgesIntegrated LED light to illuminate the work areaVery robust plastic housing, impact-resistant Two-stage hydraulics enable fast feed for starting the cableVery sturdy transport case

The BCP085G from STANLEY-DUBUIS is a reliable and powerful cordless hydraulic cable cutter designed for cutting aluminium and copper cables with medium steel armouring - and with an impressive diameter of up to 85 mm. The rotating guillotine cutting head ensures clean cuts, while a cutting force of 55 kN and a specially sharpened cutting blade cut even steel-armoured cableswith ease.For additional safety, a finger guard has been integrated to prevent jamming during the return stroke. Particularly practical: thanks to the locking lever design, the cutting head can be opened in any position - ideal for quickly releasing jammed blades. The integrated two-stage hydraulics accelerate the feed, while an LED light ensures optimum visibility in the work area. The robust, impact-resistant housing and sturdy transport case make the device ready for use on any construction site. The BCP085G is powered by an 18V lithium-ion battery from DEWALT - cordless, mobile and long-lasting. STANLEY-DUBUISoffers suitable modelsfor alternative requirements: For those who prefer to work manually, reach for the HS85G - the hand-hydraulic counterpart with the same cutting performance. For users who prefer an open shear design, the AS85S is an interesting battery-powered alternative with even greater cutting power. For stationary applications with a hydraulic unit, the S85G cutting head is recommended , which offers even more power reserves at 700 or 850 BAR. Whether for overhead line construction, energy supply or assembly work - the BCP085G combines safety, cutting precision and mobility in one professional tool.Rotatable cutting head, guillotinewith finger guard, fingers cannot get trapped when pulling back18 volt lithium-ion battery from DEWALTCutting force 55 kN, cutting blade sharpening for steel-reinforced cablesIntegrated LED light to illuminate the work areaSpecial latching lever design allows the cutting head to be opened in any position.This enables release when blades are jammed!Very robust plastic housing, impact-resistantTwo-stage hydraulics enable fast feed for starting the cableVery sturdy transport case

Fast bending without damaging the insulationIntegrated saw gaugeBendable angle up to 120°Bending radius : 4 and 8 mmMaximum capacity: 10x120x1 mm / 12x100x1Special order! Excluded from exchange.

Bending insert inner radius 8 mm, for material up to a width of 120 mm and a material thickness of 12 mm.Maximum bending radius: 100°From the manufacturer of the original conductor rail processing tool "Made in Germany".Suitable for:- for conductor rail processing tool SSBZ- compatible with: KLAUKE 50052250 LEMP 25900011 KKT BLS220, BLS120Scope of delivery:- SSBZ-BW bending insert

The BLHH4 is a versatile hand-hydraulic sheet metal punch with integrated pump - ideal for precise cut-outs in sheet steel, stainless steel and plastic with material thicknesses of up to 3 mm. The tool head can be rotated 360° in three axes, offering maximum manoeuvrability even in confined spaces. Thanks to its compatibility with tools from ALFRA, HÄWA and GREENLEE, the BLHH4 is ideal for use in switch cabinet construction, car bodywork or when machining stainless steel housings. Performance data: Ø 82 mm in sheet steel t = 2 mm Ø 63 mm in sheet steel t = 3 mm Ø 63 mm in VA t = 2 mm Suitable accessories: Round perforator for sheet steel up to Ø 96 mm Round perforator for VA up to Ø 63.5 mm Discover now at KW Hydraulik - your partner for professional sheet metal working tools. Integrated hydraulic pumpCompatible with ALFRA, HÄWA and GREENLEEFor punching sheet steel, stainless steel and plasticThe head can be rotated 360° in three axes, this high degree of manoeuvrability allows you to effortlessly reach any area to be processedScope of delivery: - BLHH-4 hole punch- Pull axis 19x130 mm - Pull axis 9.5x70 mm - Adapter 19x9.5 mm- Case The following tools can be used: Round hole tools for ST37 / t=2mm: max. D=82 mmRound hole tools for ST37 / t=3mm: max. D=63 mmRound hole tools for VA / t=2mm: max. D=63 mm

The BPE036 cordless hydraulic cable crimper from STANLEY-DUBUIS impresses with a powerful 35 kN crimping force and a compact, rotatable crimping head - ideal for precise work even in tight spaces. Thanks to its compatibility with KLAUKE Series 4 inserts and the long-lasting 18V lithium-ion battery from DEWALT, it is the perfect choice for professional cable assembly applications. Robust, lightweight and with automatic pressure cut-off, it ensures reliable and efficient crimping of copper and aluminium cables.For crimping dies series "35", compatible with KLAUKE series "4", DUBUIS "D35"Pistol shape, particularly lightweight designCompact, rotatable, closed crimping head with hinged closure for crimping even in tight spacesCrimping force 35 kN, enables crimping of:max. 120 mm² copper cable lugs to DIN 46235 max. 150 mm² aluminium 18 volt lithium-ion battery and charger from DEWALTImpact-resistant housing Supplied in an extremely hard-wearing caseAutomatic switch-off after reaching the maximum pressure (pressure relief valve)Scope of delivery:Cordless hydraulic cable press, incl. one battery, charger and case, without inserts

With a powerful 55 kN crimping force and a compact, rotatable crimping head, the BPE055 cordless hydraulic cable crimper from STANLEY-DUBUIS is perfect for professional cable crimping up to 185 mm² . Its lightweight gun design ensures comfortable working, even in tight spaces. Thanks to its compatibility with KLAUKE (Series 5), Clasen and BEKU inserts and the powerful 18V lithium-ion battery from DEWALT, it offers maximum flexibility and reliability for demanding electrical installations.For "60-H" and "50" series press inserts, compatible with KLAUKE "5" series, DUBUIS "D51", BEKU 30x30x12Pistol shape, particularly lightweight designCompact, rotatable, closed crimping head with hinged closure to enable crimping in confined areasCrimping force 55 kN, enables crimping of:max. 185 mm² copper cable lugs to DIN 46235max. 185 mm² aluminium18 volt lithium-ion battery and charger from DEWALTImpact-resistant housing Supplied in an extremely hard-wearing caseAutomatic switch-off after reaching the maximum pressure (pressure relief valve)Scope of delivery:Cordless hydraulic cable press, incl. one battery, charger and case, without inserts

The BPE062 cordless hydraulic cable crimper from STANLEY-DUBUIS impresses with its powerful 62 kN crimping capacity and is suitable for crimping copper and aluminium cables up to 300 mm². The compact, rotatable crimping head with hinged lock enables precise work, even in confined areas. With its lightweight gun design, compatibility with KLAUKE Series 22 and Ridgid inserts and the powerful 18V lithium-ion battery from DEWALT, it is the ideal solution for professional electrical installations. For "60-CK" series press inserts, compatible with KLAUKE "22" series, DUBUIS "D62"Pistol shape, particularly lightweight designCompact, rotatable, closed crimping head with hinged closure to enable crimping in confined areasCrimping force 62 kN, enables crimping of:max. 300 mm² copper cable lugs to DIN 46235max. 300 mm² aluminium18 volt lithium-ion battery and charger from DEWALTImpact-resistant housingSupplied in an extremely hard-wearing caseAutomatic switch-off after reaching the maximum pressure (pressure relief valve)Scope of delivery:Cordless hydraulic cable press, incl. one battery, charger and case, without inserts

Maximum performance with minimum weightThe BPE130 cordless hydraulic cable crimper from STANLEY-DUBUIS is the lightest 130 kN cordless tool in its class and impresses with a powerful 130 kN crimping force for a 14 mm wide crimp. Its compact, rotatable crimping head with hinged lock enables precise crimping even in confined working areas.Thanks to its compatibility with KLAUKE (13 series) and DUBUIS inserts, copper cable lugs up to 300 mm² and aluminium up to 240 mm² can be crimped effortlessly. The robust, impact-resistant housing ensures maximum durability, while the automatic pressure cut-out guarantees consistent crimping quality.Equipped with a powerful 18V lithium-ion battery from DEWALT and supplied in an extremely hard-wearing case, the BPE130 is the ideal solution for demanding electrical installations.For "130-C" series press inserts, compatible with KLAUKE "13" series, DUBUIS "C130"Pistol shape, particularly lightweight design,Lightest 130 kN battery-powered tool, enables 14 mm wide crimpingCompact, rotatable, closed crimping head with hinged lock, for crimping even in tight spacesCrimping force 130 kN, enables crimping of:max. 300 mm² copper cable lugs to DIN 46235max. 240 mm² aluminium18 volt lithium-ion battery and charger from DEWALTImpact-resistant housingSupplied in an extremely hard-wearing caseAutomatic switch-off after reaching the maximum pressure (pressure relief valve)Scope of delivery:Cordless hydraulic cable press, incl. one battery, charger and case, without inserts

The BPL036 cordless hydraulic cable crimper from STANLEY-DUBUIS combines a powerful 35 kN crimping force with an ergonomic bar design that has been specially developed for confined spaces such as control cabinet construction. Its compact, rotatable crimping head with hinged lock enables precise and secure crimping of copper cable lugs up to 120 mm² and aluminium up to 150 mm².Thanks to the robust, impact-resistant housing with two-component handle, the tool sits perfectly in the hand and offers maximum ease of use. The USB interface makes it easy to read out crimping data, while the automatic pressure cut-off ensures consistent crimping quality.With the powerful 18V lithium-ion battery from DEWALT and compatibility with KLAUKE Series 4 and DUBUIS inserts, the BPL036 is the perfect choice for professional electrical installations. The crimping tool is supplied in an extremely hard-wearing case, including battery and charger - for maximum flexibility on the construction site.Crimping tool for crimping inserts series "35", compatible with KLAUKE series "4", DUBUIS "D35"Rod shape, enables use in confined spaces such as in switch cabinet constructionCompact, rotatable, closed crimping head with hinged closure for crimping in confined spacesCrimping force 35 kN, enables crimping of:max. 120 mm² copper cable lugs to DIN 46235 max. 150 mm² aluminium 18 volt lithium-ion battery and charger from DEWALTImpact-resistant housing with two-component handle for perfect handlingSupplied in an extremely hard-wearing caseAutomatic switch-off after reaching the maximum pressure (pressure relief valve)USB interface for data readoutScope of delivery:Battery-powered hydraulic cable press, incl. one battery, charger and case, without inserts