Forestry and GALA construction

This saw has been specially developed for use in cross-cut units and automatic log-splitting machines.Powerful 11 kW / 400-volt electric motorSpeed control via frequency converterCutting speed: 20 m/sec. The chain is tensioned by an adjusting screw and lubricated by the integrated lubrication systemThe saw is fitted with a hydraulic swivel systemChain pitch: 0.404” Harvester guide bar from leading manufacturers (order guide bar separately) Available blade lengths (order blade separately): 54 – 64 – 75 – 80 – 90 – 113 cm  Available chain sprockets: 12-tooth, 13-tooth, 14-tooth, 15-tooth and 16-tooth pitch A 16-pitch chain sprocket is supplied as standard

High-performance 14.4 kW hydraulic motor : - 14.4 kW at 50.4 L/min at a maximum of 250 bar Cutting speed: 20.5 m/sec. Integrated chain lubrication Chain pitch: 0.404” Harvester guide bars from leading manufacturers (Guide bar to be ordered separately)Available blade lengths (order blade separately): 54 – 64 – 75 – 80 – 90 – 113 cm Available chain sprockets: 12-tooth, 13-tooth, 14-tooth, 15-tooth and 16-tooth pitch A 14-pitch chain sprocket is supplied as standard

High-performance 14.4 kW hydraulic motor: - 14.4 kW at 50.4 L/min at a maximum of 250 bar  Cutting speed: 20.5 m/sec. Integrated chain lubrication Hydraulic swivel mechanismChain pitch: 0.404” Harvester guide bar from leading manufacturers (order guide bar separately) Available blade lengths (order blade separately): 54 – 64 – 75 cm  Available chain sprockets: 12-tooth, 13-tooth, 14-tooth, 15-tooth and 16-tooth pitch A 14-pitch chain sprocket is supplied as standardScope of delivery excludes grapple

High-performance 50 kW hydraulic motor : - 50 kW at 67 L/min at a maximum of 400 bar The motors do not need to be operated with a 400 bar pump. At 200 bar, the power is halved, but the speed remains the same.Cutting speed: 40 m/sec. Integrated chain lubrication Chain pitch 0.404” Harvester guide bars from leading manufacturers (Order guide bar separately)Available blade lengths (order blade separately): 54 – 64 – 75 – 80 – 90 – 113 – 135 cm Available chain sprockets: 12-tooth, 13-tooth, 14-tooth, 15-tooth and 16-tooth pitch A 13-pitch chain sprocket is supplied as standard

High-performance 50 kW hydraulic motor: - 50 kW at 67 L/min at a maximum of 400 bar  The motors do not need to be operated with a 400 bar pump. At 200 bar, the power is halved, but the speed remains the same.Cutting speed: 40 m/sec. Integrated chain lubrication Hydraulic swivel mechanismChain pitch 0.404” Harvester guide bar from leading manufacturers (order guide bar separately) Available blade lengths (order blade separately): 54 – 64 – 75 cm  Available chain sprockets: 12-tooth, 13-tooth, 14-tooth, 15-tooth and 16-tooth pitch A 13-pitch chain sprocket is supplied as standardScope of delivery excludes grapple

This saw has been specially developed for use in cross-cut sawing systems and automatic log-splitting machines.Powerful 5 kW / 400-volt electric motorSpeed control via frequency converterCutting speed: 20 m/sec. The chain is tensioned by an adjusting screw and lubricated by the integrated lubrication systemThe saw is fitted with a hydraulic swivel systemChain pitch: 0.404” Harvester guide bar from leading manufacturers (order guide bar separately) Available blade lengths (order blade separately): 54 – 64 – 75 – 80 – 90 – 113 cm  Available chain sprockets: 12-tooth, 13-tooth, 14-tooth, 15-tooth and 16-tooth pitch A 16-pitch chain sprocket is supplied as standard

Powerful 6 kW hydraulic motor: - 6 kW at 21 L/min at a maximum of 250 bar  Cutting speed: 20 m/sec. The chain is tensioned by an adjusting screw and lubricated by the integrated lubrication systemThe saw is fitted with a hydraulic swivel systemChain pitch: 0.404” Harvester guide bar from leading manufacturers (order guide bar separately) Available blade lengths (order blade separately): 54 – 64 – 75 – 80 – 90 – 113 cm  Available chain sprockets: 12-tooth, 13-tooth, 14-tooth, 15-tooth and 16-tooth pitch A 14-pitch chain sprocket is supplied as standard

Powerful 6 kW hydraulic motor: - 6 kW at 21 L/min at a maximum of 250 bar    Cutting speed: 20.5 m/sec. Hydraulic swivel systemIntegrated chain lubrication Chain pitch: 0.404” Chain guardHarvester guide bar from leading manufacturers (order guide bar separately) Available blade lengths (order blade separately): 54 – 64 – 75 cm    Available chain sprockets: 12-tooth, 13-tooth, 14-tooth, 15-tooth and 16-tooth pitch A 14-pitch chain sprocket is supplied as standardScope of delivery excludes grapple

Chainsaw with hand brake Three different types of chain are available - Planer-tooth: for wood, plastic and GRP without sand content - Carbide-tipped chain: for heavier-duty use on wood, plastic and GRP without sand content - Diamond-tipped chain: for concrete, cast steel, ductile iron and GRP containing sand Diver’s version, suitable for underwater use Suitable for work in potentially explosive atmospheres in accordance with the ATEX Directive 2014/34/EU: II2GcIIBT5 Vibration level: 3.6 m/s² Power: 7.7 kW / 5,000 rpm / 13.2 m/s Hydraulics: 40–50 L/min at 140–200 barCutting length: 27 to 103 cm Connection: ¾” x 16UNF-2B thread (Supplied without couplings) Contents: - CS-7.7 chainsaw - without guide bar - without saw chainSpecial order! Non-returnable.

This saw has been specially developed for use in cross-cut units and automatic log-splitting machines.Powerful 7.5 kW / 400-volt electric motorSpeed control via frequency converterCutting speed: 20 m/sec. The chain is tensioned by an adjusting screw and lubricated by the integrated lubrication systemThe saw is fitted with a hydraulic swivel systemChain pitch: 0.404” Harvester guide bar from leading manufacturers (order guide bar separately) Available blade lengths (order blade separately): 54 – 64 – 75 – 80 – 90 – 113 cm  Available chain sprockets: 12-tooth, 13-tooth, 14-tooth, 15-tooth and 16-tooth pitch A 16-pitch chain sprocket is supplied as standard

High-performance 85 kW hydraulic motor : - 85 kW at 110 L/min at a maximum of 400 bar The motors do not need to be operated with a 400 bar pump. At 200 bar, the power is halved, but the speed remains the same.Cutting speed: 40 m/sec. Integrated chain lubrication Chain pitch 0.404” Harvester guide bars from leading manufacturers (Order guide bar separately)Available blade lengths (order blade separately): 54 – 64 – 75 – 80 – 90 – 113 – 135 cm Available chain sprockets: 12-tooth, 13-tooth, 14-tooth, 15-tooth and 16-tooth pitch A 13-pitch chain sprocket is supplied as standard

High-performance 85 kW hydraulic motor: - 85 kW at 110 L/min at a maximum of 400 bar  The motors do not need to be operated with a 400 bar pump. At 200 bar, the power is halved, but the speed remains the same.Cutting speed: 40 m/sec. Integrated chain lubrication Hydraulic swivel mechanismChain pitch 0.404” Harvester guide bars from leading manufacturers (order guide bar separately) Available blade lengths (order blade separately): 54 – 64 – 75 cm  Available chain sprockets: 12-tooth, 13-tooth, 14-tooth, 15-tooth and 16-tooth pitch A 13-pitch chain sprocket is supplied as standardScope of delivery excludes grapple

High-performance 9.3 kW hydraulic motor: - 9.3 kW at 31.5 L/min at a maximum of 250 bar  Cutting speed: 20 m/sec. The chain is tensioned by an adjusting screw and lubricated by the integrated lubrication systemThe saw is fitted with a hydraulic swivel systemChain pitch: 0.404” Harvester guide bars from leading manufacturers (to be ordered separately) Available blade lengths (to be ordered separately): 54 – 64 – 75 – 80 – 90 – 113 cm  Available chain sprockets: 12-tooth, 13-tooth, 14-tooth, 15-tooth and 16-tooth pitch A 14-pitch chain sprocket is supplied as standard

High-performance 9.3 kW hydraulic motor: - 9.3 kW at 31.5 L/min at a maximum of 250 bar    Cutting speed: 20.5 m/sec. Hydraulic swivel systemIntegrated chain lubrication Chain pitch: 0.404” Chain guardHarvester guide bars from leading manufacturers (to be ordered separately) Available blade lengths (to be ordered separately): 54 – 64 – 75 cm    Available chain sprockets: 12-tooth, 13-tooth, 14-tooth, 15-tooth and 16-tooth pitch A 14-pitch chain sprocket is supplied as standardScope of delivery excludes grapple

The hydraulic power unit, fitted with a 25 kW diesel engine, is designed to meet the most demanding requirements in industrial applications. The sound-insulated diesel engine, which complies with Stage V emissions standards, enables low-emission yet powerful operation. Depending on the working pressure, the flow rate ranges from 70 litres per minute at 140 bar to 40 litres per minute at 250 bar (configurable to customer requirements).The unit is operated directly via an integrated electrical control panel with safety buttons. A hydraulic manifold with flow and pressure control valves, as well as a pressure gauge for precise monitoring of the working pressure, are fitted as standard. The oil tank has a capacity of 60 litres, whilst the diesel tank holds 70 litres. A high-performance air-oil cooling system and a high-quality oil filter ensure reliable operation even under heavy loads.The unit is housed in a sturdy protective frame with solid transport supports made from welded and painted tubing, and is suitable for both mobile and stationary applications. The maximum operating pressure is 250 bar. Connection is via flat-face couplings (P+T) and is designed for operating a single piece of equipment.Optional configurations are available on request, including cable or radio remote control, a load-sensing pump, multiple connections, variable pressures and flow rates, as well as mounting on trailers or self-propelled crawler chassis.Hydraulic power units with a sound-enclosed 25 kW diesel engine, Stage V emissions standardFlow rate: (example with CASAPPA gear pump)70 L/min at 140 bar50 L/min at 200 bar40 L/min at 250 barControls on the pump, electrical system with control panel, safety buttons (Remote control available as an option)Hydraulic manifold with flow and pressure control valves, pressure gaugeIncludes 60-litre oil tank, 70-litre diesel tank, oil cooling (air-to-oil), oil filter, electric starterSturdy protective frame with transport supports made from welded and painted tubingThis pump can be used up to an operating pressure of 250 bar Connection for one piece of equipment, flat-face couplings (P+T)This unit can be supplied in many other configurations on request.Options: wired remote control, radio remote control, load-sensing pump, multiple connections, different pressures and flow rates, mounted on a trailer or on a self-propelled crawler chassis, ...Subject to technical changes!

The HD35LS hydraulic power unit is fitted with a sound-insulated diesel engine that complies with the latest Stage V emissions standard. The powerful 25 kW engine drives a load-sensing variable-displacement pump, which automatically adjusts to the current load conditions. The flow rate ranges from 20 to 70 L/min with a pressure range of 130 to 250 bar.The pump is operated directly via an integrated electrical system with a control panel and safety buttons. For greater flexibility, the system can be optionally fitted with a remote control. A robust hydraulic manifold with flow and pressure control valves, as well as a pressure gauge for monitoring pressure, is fitted as standard.The unit features a 60-litre oil tank, a 70-litre diesel tank, an efficient oil cooling system (air-to-oil) and a high-quality oil filter. Starting is carried out reliably via an electric starter. The entire unit is housed in a sturdy protective frame with transport supports made of painted steel tubing.The unit achieves a maximum operating pressure of 250 bar and provides a connection for an implement via flat-face couplings (P+T). The system can be individually configured as an option – for example, with cable or radio remote control, multiple connections, different pressure and flow rates, or mounting on a trailer or self-propelled crawler chassis. Hydraulic power units with a sound-insulated 25 kW diesel engine, Stage V emissions standardFlow rate with variable-displacement pump (load-sensing): 20–70 L/min at 130–250 barautomatic adjustment to the load conditionControls on the pump, electrical system with control panel, safety buttons (remote control available as an option)Hydraulic manifold with flow and pressure control valves, pressure gaugeIncludes 60-litre oil tank, 70-litre diesel tank, oil cooling (air-to-oil), oil filter, electric starterSturdy protective frame with transport supports made from welded and painted tubingThis pump can be used up to an operating pressure of 250 bar Connection for one piece of equipment, flat-face couplings (P+T)This unit can be supplied in many other configurations on request.Options: cable remote control, radio remote control, multiple connections, different pressures and flow rates, mounted on a trailer or on a self-propelled crawler chassis, ...Subject to technical changes!

The HM300-BETON fromHYDRAis a hydraulically operated attachment pile driver for excavators weighing between 2 and 6 tonnes. It is specially designed for driving concrete piles and is equipped with an integrated grapple and a centring mount.It is operated directly from the excavator cab, enabling one-man operation. The impact force is 3,000 kg at a frequency of 2,000 min⁻¹. The hydraulic supply is divided into two circuits: Vibratory mode: 40 l/min at 150 barGripper control: 10–20 l/min at 150 bar With a kerb weight of 320 kg and a grapple opening of up to 220 mm, the system is suitable for a wide range of applications in gardening and landscaping, fence construction or foundation work using concrete piles. Impact force: 3000 kg Frequency: 2,000 min⁻¹ Weight: 320 kg Maximum grapple opening: 220 mm Hydraulic vibrator: 40 L/min at 150 bar Hydraulic grapple: 10–20 L/min at 150 bar Recommended excavator weight: 2 to 6 tonnes

The HM300-HOLZ fromHYDRAis a robust attachment-type pile driver designed for the efficient driving of timber piles. Developed for attachment to excavators with an operating weight of 2 to 6 tonnes, the system allows for full operation by a single person directly from the cab.Thanks to the integrated grapple and a special centring mount for round timber, timber piles can be guided precisely and driven in with control. The pile driver operates with an impact force of 3,000 kg and a frequency of 2,000 min⁻¹, enabling a high penetration depth even in compacted soils.The hydraulic requirements are as follows:Vibrator: 40 l/min at 150 barGrapple: 10–20 l/min at 150 bar The maximum grapple opening is 220 mm, and the total weight is 320 kg.Impact force: 3,000 kgFrequency: 2,000 min⁻¹Weight: 320 kgMaximum grapple opening: 220 mmHydraulic vibrator: 40 L/min at 150 barHydraulic grapple: 10–20 L/min at 150 barRecommended excavator weight: 2 to 6 tonnes

TheHYCONHPD is a high-performance hydraulic pile driver for driving posts, sections, signs, fences and ground anchors with a diameter of up to 130 mm. This compact, mobile unit is ideal for use inagriculture and forestry, ingardening and landscaping, andon construction sites for civil engineering and pipework projects.The driver operates with an oil flow of 30 l/min at a working pressure of 100 bar. The integrated nitrogen pressure accumulator ensures smooth power transmission. With flat-face couplings (ISO 16028), guide handles and a vibration level of just 9.4 m/s², the unit meets high ergonomic and safety standards.Features:Nitrogen pressure accumulator Hose whips with flat-face couplings (ISO 16028) HandlesOil flow: 30 L/min.Working pressure: 100 barMax. pressure relief valve: 160 bar Sound pressure level at 1 m: 96 LPA dB Vibration level (3 axes): 9.4 m/s² Possible optional accessories:HY-HPD Adapter 1: 65 × 65 mmHY-HPD Adapter 2: 110 x 110 mm HY-HPD Adapter 3: D = 60 mm HY-HPD Adapter 4: D = 80 mm HY-HPD Adapter 5: D=105 mm HY-HPD Adapter 6: D=130 mm

Extreme performance for demanding applications – the DYNASET HSP16000 with a flow rate of up to 20,000 L/min The hydraulically driven HSP16000 submersible pump from DYNASET is a true powerhouse for professional use in high-performance applications. With a flow rate of up to 20,000 litres per minute and a maximum head of 35 metres, this pump is ideally suited to industrial applications, large-scale drainage and use in extreme conditions in civil engineering, pipework construction or flood situations. The 8" connection allows for high flow rates with minimal resistance. Thanks to its robust design and hydraulic drive, the HSP16000 is the optimal solution for pipework, construction and municipal machinery, as well as underwater operations where maximum performance and absolute reliability are essential. DYNASET HSP-16000/5-317Flow rate at 5 m head: 16,000 L/minMax. water flow rate: 20,000 L/minMax. delivery head: 35 mMax. particle size: 18 mmHose connection: 8"  Hydraulics: 317 L/min at max. 350 bar

Compact, powerful and reliable – the DYNASET HSP3000 submersible pump for professional applications The hydraulically driven HSP3000 submersible pump from the Finnish manufacturer DYNASET impresses with its balanced combination of high flow rate, robust construction and compact design. With a flow rate of up to 3,000 litres per minute at a head of 5 metres and a maximum head of up to 50 metres, this model is ideal for a wide range of industrial and municipal applications – from civil engineering to emergency drainage. The pump is ideally suited to demanding environments in pipework construction, civil engineering and municipal services, as well as for a wide range of underwater applications, such as those required in the underwater tools category. The 3" hose connection enables an effective flow rate, whilst the maximum back-pressure of 30 bar ensures reliable operation in backflow situations. Flow rate at 5 m head: 3000 L/min Max. water flow rate: 3,000 L/min Max. delivery head: 50 m Max. particle size: -- mm Hose connection: 3" Hydraulics: 48–70 L/min at max. 250 barBack-pressure: max. 30 bar

Maximum performance for demanding applications – the DYNASET HSP6500 submersible pump for construction, pipework and industry The DYNASET HSP6500 is an extremely powerful, hydraulically driven submersible pump that has been specially developed for use in harsh conditions. With a flow rate of 6,500 litres per minute at a head of 5 metres and a maximum head of up to 50 metres, this model is ideal for large-scale drainage tasks, such as during flooding, in civil engineering or for industrial water transfer. Thanks to its robust construction and hydraulic output of 85–135 L/min at up to 250 bar, it ensures reliable and long-lasting operation – even under high back-pressure conditions of up to 30 bar. The pump is ideally suited for use in sectors such as pipeline construction, municipal and civil engineering, and underwater work. The generously sized 5" hose connection ensures rapid flow and high efficiency. Delivery rate at 5 m head: 6500 L/min Max. water flow rate: 6,500 L/min Max. head: 50 m Max. particle size: -- mm Hose connection: 5" Hydraulics: 85–135 L/min at max. 250 barBack-pressure: max. 30 bar

Hydraulic power for the most demanding applications – the DYNASET HSP8500 submersible pump for pipework, civil engineering and emergency response The HSP8500 from DYNASET is an extremely powerful hydraulically driven submersible pump, specially designed for high flow rates under demanding conditions. With a flow rate of up to 8,500 litres per minute at a head of 5 metres and a maximum head of 50 metres, it is ideally suited to time-critical drainage operations, industrial applications and flood response operations. The robust 6" pump handles large volumes of water with ease and impresses with a hydraulic demand of 135–215 L/min at an operating pressure of up to 230 bar. It operates reliably and efficiently even at high back-pressure of 30 bar. Perfectly suited for use in pipework construction, civil engineering and municipal works, as well as for underwater operations. Flow rate at 5 m head: 8,500 L/min Max. water flow rate: 8,500 L/min Max. delivery head: 50 m Max. particle size: -- mm Hose connection: 6" Hydraulics: 135–215 L/min at max. 230 barBack-pressure: max. 30 bar

Compact power for demanding applications – the DYNASET HSP900 submersible pump for construction, pipework and underwater engineering The HSP900 from DYNASET is a compact hydraulic submersible pump which, despite its handy design, delivers an impressive flow rate of 900 litres per minute at a head of 5 metres. It is the ideal solution for localised drainage, smaller pipework projects and mobile applications on construction sites. With a maximum head of 21 metres and a hydraulic flow requirement of just 36 L/min at up to 170 bar, the pump is ideally suited for flexible use in pipework construction, in construction and municipal machinery, and for underwater work – such as that required in the field of underwater tools. Flow rate at 5 m head: 900 L/min Max. water flow rate: 900 L/min Max. delivery head: 21 m Max. particle size: -- mm Hose connection: 2" Hydraulics: 36 L/min at max. 170 barBack-pressure: max. 30 bar